This paper provides a detailed introduction to and analysis of the course of China's technological innovation in liquid hydrogen/liquid oxygen(LH2/LOX)rocket engines from a historical point of view.It starts with ...This paper provides a detailed introduction to and analysis of the course of China's technological innovation in liquid hydrogen/liquid oxygen(LH2/LOX)rocket engines from a historical point of view.It starts with the investigation of LH2/LOX rocket engines by relevant departments of the Chinese Academy of Sciences in the 1960s and their preliminary achievements.Then,the policy decision concerning LH2/LOX engine development,the project approval of the Long March-3(Chang Zheng-3,CZ-3)rocket,and the process of developing LH2/LOX engines are analyzed in detail,followed by an introduction to and summary of the development situation and technical innovation characteristics of China's LH2/LOX engines as they grew from 4 tons to 8 tons,and finally to 50 tons.Finally,the paper briefly analyzes the innovation experience connected with China's LH2/LOX engines.展开更多
The thermal protection of rocket engines is a crucial aspect of rocket engine design.In this paper,the gas film/regenerative composite cooling of the liquid oxygen/liquid methane(LOX/LCH4)rocket engine thrust chamber ...The thermal protection of rocket engines is a crucial aspect of rocket engine design.In this paper,the gas film/regenerative composite cooling of the liquid oxygen/liquid methane(LOX/LCH4)rocket engine thrust chamber was investigated.A gas film/regenerative composite cooling model was developed based on the Grisson gas film cooling efficiency formula and the one-dimensional regenerative cooling model.The accuracy of the model was validated through experiments conducted on a 6 kg/s level gas film/regenerative composite cooling thrust chamber.Additionally,key parameters related to heat transfer performance were calculated.The results demonstrate that the model is sufficiently accurate to be used as a preliminary design tool.The temperature rise error of the coolant,when compared with the experimental results,was found to be less than 10%.Although the pressure drop error is relatively large,the calculated results still provide valuable guidance for heat transfer analysis.In addition,the performance of composite cooling is observed to be superior to regenerative cooling.Increasing the gas film flow rate results in higher cooling efficiency and a lower gas-side wall temperature.Furthermore,the position at which the gas film is introduced greatly impacts the cooling performance.The optimal introduction position for the gas film is determined when the film is introduced from a single row of holes.This optimal introduction position results in a more uniform wall temperature distribution and reduces the peak temperature.Lastly,it is observed that a double row of holes,when compared to a single row of holes,enhances the cooling effect in the superposition area of the gas film and further lowers the gas-side wall temperature.These results provide a basis for the design of gas film/regenerative composite cooling systems.展开更多
Turbulent two-phase reacting flow in the chamber of LOX/RP-1 bipropellant liquid rocket engine is numerically investigated in this paper. The predicted pressure and mean axial velocity are qualitatively consistent wit...Turbulent two-phase reacting flow in the chamber of LOX/RP-1 bipropellant liquid rocket engine is numerically investigated in this paper. The predicted pressure and mean axial velocity are qualitatively consistent with the experimental measurements. The self-excited pressure oscillations are obtained without any disturbance introduced through the initial and boundary conditions. It is found that amount of abrupt pressure peaks appear frequently and stochastically in the head regions of the chamber, which are the important sources to drive and strengthen combustion instability. Such abrupt pressures are induced by local constant volume combustion, because local combustible gas mixtures with high temperature are formed and burnt out suddenly due to some fuel droplets reaching their critical state in a rich oxygen surrounding. A third Damkhler number is defined as the ratio of the characteristic time of a chemical reaction to the characteristic time of a pressure wave expansion to measure the relative intensity of acoustic propagation and combustion process in thrusters. The analysis of the third Damkhler number distributions in the whole thrust chamber shows that local constant volume combustion happens in the head regions, while constant pressure combustion presents in the downstream regions. It is found that the combustion instability occurs in the head regions within about 30 mm from the thruster head.展开更多
Heat transfer in the thrust chamber is of great importance in the design of liquid propellant rocketengines. Regenerative cooling is an advanced method which can ensure not only the proper runningbut also higher perfo...Heat transfer in the thrust chamber is of great importance in the design of liquid propellant rocketengines. Regenerative cooling is an advanced method which can ensure not only the proper runningbut also higher performance of a rocket engine. The theoretical model is complicated, it relates to fluiddynamics, heat transfer, combustion, etc... In this papers a regenerative cooling model is presented.Effects such as radiation, heat transfer to environment, variable thermal properties and coking areincluded in the model. This model can be applied to all kinds of liquid propellant rocket engines aswell as similar constructions. The modularized computer code is completed in the work.展开更多
基金Projects funded by the National Social Science Fund (19BDJ064)
文摘This paper provides a detailed introduction to and analysis of the course of China's technological innovation in liquid hydrogen/liquid oxygen(LH2/LOX)rocket engines from a historical point of view.It starts with the investigation of LH2/LOX rocket engines by relevant departments of the Chinese Academy of Sciences in the 1960s and their preliminary achievements.Then,the policy decision concerning LH2/LOX engine development,the project approval of the Long March-3(Chang Zheng-3,CZ-3)rocket,and the process of developing LH2/LOX engines are analyzed in detail,followed by an introduction to and summary of the development situation and technical innovation characteristics of China's LH2/LOX engines as they grew from 4 tons to 8 tons,and finally to 50 tons.Finally,the paper briefly analyzes the innovation experience connected with China's LH2/LOX engines.
基金supported by the National Science Fund Project(No.2019-JCJQ-ZQ-019)the Innovative Research Group Project of National Natural Science Foundation of China(No.T2221002).
文摘The thermal protection of rocket engines is a crucial aspect of rocket engine design.In this paper,the gas film/regenerative composite cooling of the liquid oxygen/liquid methane(LOX/LCH4)rocket engine thrust chamber was investigated.A gas film/regenerative composite cooling model was developed based on the Grisson gas film cooling efficiency formula and the one-dimensional regenerative cooling model.The accuracy of the model was validated through experiments conducted on a 6 kg/s level gas film/regenerative composite cooling thrust chamber.Additionally,key parameters related to heat transfer performance were calculated.The results demonstrate that the model is sufficiently accurate to be used as a preliminary design tool.The temperature rise error of the coolant,when compared with the experimental results,was found to be less than 10%.Although the pressure drop error is relatively large,the calculated results still provide valuable guidance for heat transfer analysis.In addition,the performance of composite cooling is observed to be superior to regenerative cooling.Increasing the gas film flow rate results in higher cooling efficiency and a lower gas-side wall temperature.Furthermore,the position at which the gas film is introduced greatly impacts the cooling performance.The optimal introduction position for the gas film is determined when the film is introduced from a single row of holes.This optimal introduction position results in a more uniform wall temperature distribution and reduces the peak temperature.Lastly,it is observed that a double row of holes,when compared to a single row of holes,enhances the cooling effect in the superposition area of the gas film and further lowers the gas-side wall temperature.These results provide a basis for the design of gas film/regenerative composite cooling systems.
基金supported by the National Natural Science Foundation of China(Grant No.50706021)
文摘Turbulent two-phase reacting flow in the chamber of LOX/RP-1 bipropellant liquid rocket engine is numerically investigated in this paper. The predicted pressure and mean axial velocity are qualitatively consistent with the experimental measurements. The self-excited pressure oscillations are obtained without any disturbance introduced through the initial and boundary conditions. It is found that amount of abrupt pressure peaks appear frequently and stochastically in the head regions of the chamber, which are the important sources to drive and strengthen combustion instability. Such abrupt pressures are induced by local constant volume combustion, because local combustible gas mixtures with high temperature are formed and burnt out suddenly due to some fuel droplets reaching their critical state in a rich oxygen surrounding. A third Damkhler number is defined as the ratio of the characteristic time of a chemical reaction to the characteristic time of a pressure wave expansion to measure the relative intensity of acoustic propagation and combustion process in thrusters. The analysis of the third Damkhler number distributions in the whole thrust chamber shows that local constant volume combustion happens in the head regions, while constant pressure combustion presents in the downstream regions. It is found that the combustion instability occurs in the head regions within about 30 mm from the thruster head.
文摘Heat transfer in the thrust chamber is of great importance in the design of liquid propellant rocketengines. Regenerative cooling is an advanced method which can ensure not only the proper runningbut also higher performance of a rocket engine. The theoretical model is complicated, it relates to fluiddynamics, heat transfer, combustion, etc... In this papers a regenerative cooling model is presented.Effects such as radiation, heat transfer to environment, variable thermal properties and coking areincluded in the model. This model can be applied to all kinds of liquid propellant rocket engines aswell as similar constructions. The modularized computer code is completed in the work.
