目的通过表面Cr离子注入在LaFe_(11.6)Si_(1.4)合金表面生成一层具有耐蚀作用的保护层,从而提高合金的耐腐蚀性能。方法采用表面离子注入法,分别在注入电压为20、30、40 k V,注入计量为5×10^(16)、10×10^(16)、50×10^(16...目的通过表面Cr离子注入在LaFe_(11.6)Si_(1.4)合金表面生成一层具有耐蚀作用的保护层,从而提高合金的耐腐蚀性能。方法采用表面离子注入法,分别在注入电压为20、30、40 k V,注入计量为5×10^(16)、10×10^(16)、50×10^(16) ions/cm^2的条件下注入Cr离子。利用扫描电子显微镜及X-射线衍仪对合金的表面形貌、组织结构及成分进行了分析,通过电化学方法对合金表面离子注入后的耐腐蚀性进行了研究。结果当Cr离子的注入电压为40 k V,注入剂量为5×10^(16)、1×10^(17)、5×10^(17) ions/cm^2时,合金的开路电位分别是-0.585、-0.584、-0.57V(vs.SCE)。当Cr离子的注入剂量为5×10^(17) ions/cm2,注入电压为20、30、40 k V时,合金的开路电位分别是-0.63、-0.61、-0.57 V(vs.SCE)。可以看到,随着Cr离子注入计量和注入电压的增加,合金表面的腐蚀电位正向移动,耐腐蚀性提高。结论 Cr离子注入能够显著提高合金的耐腐蚀性,分析认为主要是由于合金表面生成了一层具有耐腐蚀性能的Cr_2O_3钝化层。此外,由于注入离子的轰击导致表面La(Fe,Si)13相分解生成α-Fe,也提高了合金的电极电位,增强了耐腐蚀性。展开更多
The FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were prepared by hot pressing(HP). The microstructure,corrosion behavior and magnetocaloric effect(MCE) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were investiga...The FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were prepared by hot pressing(HP). The microstructure,corrosion behavior and magnetocaloric effect(MCE) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were investigated systematically. The results show that the corrosion resistance of FeNi coated LaFe_(11.6)Si_(1.4)Sn composites is better than that of LaFe_(11.6)Si_(1.4)/Sn composites in deionized water. The maximum magnetic entropy change((-△S_M)^(max)) and relative cooling power(RCP) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites are 13.30 J/(kg-K) and 146.25 J/kg, respectively, which are larger than that((-△S_M)^(max), 10.65 J/(kg·K) and RCP, 106.53 J/kg) of LaFe_(11.6)Si_(1.4)/Sn composites in a low magnetic field change of 2 T. FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites possess a more negative slope. The improvement of magnetic properties is due to high permeability FeNi permalloy(1 J85) which improves the itinerant-electron metamagnetic(IEM) transition. So, the method of coating FeNi can provide a new idea for enhancing the corrosion resistance and magnetocaloric effect of La(Fe_xSi_(1-x))_(13)-based materials.展开更多
The large disc LaFe11.6Si1.4 alloy, which was prepared by medium-frequency induction furnace, was annealed at 1503 K for different time. The main phases were 1：13 phase in the edge parts of the large discs alloy; the...The large disc LaFe11.6Si1.4 alloy, which was prepared by medium-frequency induction furnace, was annealed at 1503 K for different time. The main phases were 1：13 phase in the edge parts of the large discs alloy; the impurity phases included α-Fe phase, LaFeSi phase, and even very small amount of La5Si3 phase. The amounts of impurity phases reduced with increasing in annealing time. The magnetic properties in the edge parts of the large discs LaFe11.6Si1.4 alloy were investigated. The magnetic susceptibility had an abrupt change at Curie temperature（TC） as the magnetization in M-T curves. The alloys had almost the same TC（191 K）, the magnetocaloric effect（MCE） and relative cooling power（RCP） increased with increasing in annealing time. In addition, for the same alloy, the magnetic hysteresis decreased with the increase in temperature.展开更多
The morphology analysis and electrochemical method were used to study the corrosion behavior of LaFe11.6Si1.4 alloy of copper ion implantation. X-ray photoelectron spectroscopy （XPS） and atomic emission spectroscopy...The morphology analysis and electrochemical method were used to study the corrosion behavior of LaFe11.6Si1.4 alloy of copper ion implantation. X-ray photoelectron spectroscopy （XPS） and atomic emission spectroscopy （AES） research results showed that a 15 nm-thick oxide film was formed on the surface of sample, and the copper content reached the highest value at 60 nm with a normal distribution. Immersion experiments indicated that the corrosion happened in the copper-poor zone firstly and a galvanic connection was formed among different zones on the surface due to the inhomogeneous distribution of copper. Electrochemical experiment results showed that the corrosion was serious when the ion acceleration voltage increased, and the high acceleration could reduce the thermodynamic performance of corrosion of LaFe11.6Si1.4 alloy.展开更多
文摘目的通过表面Cr离子注入在LaFe_(11.6)Si_(1.4)合金表面生成一层具有耐蚀作用的保护层,从而提高合金的耐腐蚀性能。方法采用表面离子注入法,分别在注入电压为20、30、40 k V,注入计量为5×10^(16)、10×10^(16)、50×10^(16) ions/cm^2的条件下注入Cr离子。利用扫描电子显微镜及X-射线衍仪对合金的表面形貌、组织结构及成分进行了分析,通过电化学方法对合金表面离子注入后的耐腐蚀性进行了研究。结果当Cr离子的注入电压为40 k V,注入剂量为5×10^(16)、1×10^(17)、5×10^(17) ions/cm^2时,合金的开路电位分别是-0.585、-0.584、-0.57V(vs.SCE)。当Cr离子的注入剂量为5×10^(17) ions/cm2,注入电压为20、30、40 k V时,合金的开路电位分别是-0.63、-0.61、-0.57 V(vs.SCE)。可以看到,随着Cr离子注入计量和注入电压的增加,合金表面的腐蚀电位正向移动,耐腐蚀性提高。结论 Cr离子注入能够显著提高合金的耐腐蚀性,分析认为主要是由于合金表面生成了一层具有耐腐蚀性能的Cr_2O_3钝化层。此外,由于注入离子的轰击导致表面La(Fe,Si)13相分解生成α-Fe,也提高了合金的电极电位,增强了耐腐蚀性。
基金Project supported by the Key Project of National Natural Science Foundation of China(51176065)
文摘The FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were prepared by hot pressing(HP). The microstructure,corrosion behavior and magnetocaloric effect(MCE) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites were investigated systematically. The results show that the corrosion resistance of FeNi coated LaFe_(11.6)Si_(1.4)Sn composites is better than that of LaFe_(11.6)Si_(1.4)/Sn composites in deionized water. The maximum magnetic entropy change((-△S_M)^(max)) and relative cooling power(RCP) of FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites are 13.30 J/(kg-K) and 146.25 J/kg, respectively, which are larger than that((-△S_M)^(max), 10.65 J/(kg·K) and RCP, 106.53 J/kg) of LaFe_(11.6)Si_(1.4)/Sn composites in a low magnetic field change of 2 T. FeNi coated LaFe_(11.6)Si_(1.4)/Sn composites possess a more negative slope. The improvement of magnetic properties is due to high permeability FeNi permalloy(1 J85) which improves the itinerant-electron metamagnetic(IEM) transition. So, the method of coating FeNi can provide a new idea for enhancing the corrosion resistance and magnetocaloric effect of La(Fe_xSi_(1-x))_(13)-based materials.
基金Project supported by the National Natural Science Foundation of China(51176050)China Postdoctoral Science Foundation(2013M542274)
文摘The large disc LaFe11.6Si1.4 alloy, which was prepared by medium-frequency induction furnace, was annealed at 1503 K for different time. The main phases were 1：13 phase in the edge parts of the large discs alloy; the impurity phases included α-Fe phase, LaFeSi phase, and even very small amount of La5Si3 phase. The amounts of impurity phases reduced with increasing in annealing time. The magnetic properties in the edge parts of the large discs LaFe11.6Si1.4 alloy were investigated. The magnetic susceptibility had an abrupt change at Curie temperature（TC） as the magnetization in M-T curves. The alloys had almost the same TC（191 K）, the magnetocaloric effect（MCE） and relative cooling power（RCP） increased with increasing in annealing time. In addition, for the same alloy, the magnetic hysteresis decreased with the increase in temperature.
基金Project supported by the Key Project of National Natural Science Foundation of China (50731007)the National High Technology Research and Development Program of China (2007AA03Z440)
文摘The morphology analysis and electrochemical method were used to study the corrosion behavior of LaFe11.6Si1.4 alloy of copper ion implantation. X-ray photoelectron spectroscopy （XPS） and atomic emission spectroscopy （AES） research results showed that a 15 nm-thick oxide film was formed on the surface of sample, and the copper content reached the highest value at 60 nm with a normal distribution. Immersion experiments indicated that the corrosion happened in the copper-poor zone firstly and a galvanic connection was formed among different zones on the surface due to the inhomogeneous distribution of copper. Electrochemical experiment results showed that the corrosion was serious when the ion acceleration voltage increased, and the high acceleration could reduce the thermodynamic performance of corrosion of LaFe11.6Si1.4 alloy.
