Efficient and selective upcycling of waste polylactic acid into acetate using nickel selenide

The conversion of waste polylactic acid(PLA)plastics into high-value-added chemicals through electrochemical methods is a promising and sustainable approach.However,developing efficient and highly selective catalysts for lactic acid oxidation reaction(LAOR)and understanding the reaction process are challenging.Here,we report the electrooxidation of waste PLA to acetate at a high current density of 100 mA cm-2 with high Faraday efficiency(~95%)and excellent stability(>100 h)over a nickel selenide nanosheet catalyst.In addition,a total Faraday efficiency of up to 190%was achieved for carboxylic acids,including acetic acid and formic acid,by coupling with the cathodic CO_(2) reduction reaction.In situ experimental results and theoretical simulations revealed that the catalytic activity center of LAOR was dynamically formed NiOOH species,and the surface-adsorbed SeO_(x) species accelerated the formation of Ni~(3+)species,thus promoting catalytic activity.The mechanism of lactic acid electrooxidation was further elucidated.Lactic acid was dehydrogenated to produce pyruvate first and then formed CH_3CO due to preferential C-C bond cleavage,resulting in the presence of acetate.This work demonstrated a sustainable method for recycling waste PLA and CO_(2) into high-value-added products.

Constructing a stable interface on Ni-rich LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode via lactic acid-assisted engineering strategy

Ni-rich layered oxides are potential cathode materials for next-generation high energy density Li-ion batteries due to their high capacity and low cost.However,the inherently unstable surface properties,including high levels of residual Li compounds,dissolution of transition metal cations,and parasitic side reactions,have not been effectively addressed,leading to significant degradation in their electrochemical performance.In this study,we propose a simple and effective lactic acid-assisted interface engineering strategy to regulate the surface chemistry and properties of Ni-rich LiNi_(0.8)Co_(0.1)Mr_(0.1)O_(2) cathode.This novel surface treatment method successfully eliminates surface residual Li compounds,inhibits structural collapse,and mitigates cathode-electrolyte interface film growth.As a result,the lactic acidtreated LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) achieved a remarkable capacity retention of 91.7% after 100 cycles at 0.5 C(25℃) and outstanding rate capability of 149.5 mA h g^(-1) at 10 C,significantly outperforming the pristine material.Furthermore,a pouch-type full cell incorporating the modified LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode demonstrates impressive long-term cycle life,retaining 81.5% of its capacity after 500 cycles at 1 C.More importantly,the thermal stability of the modified cathode is also dramatically improved.This study offers a valuable surface modification strategy for enhancing the overall performance of Ni-rich cathode materials.

Co-inoculation of Debaryomyces hansenii and lactic acid bacteria: a strategy to improve the taste and odour profiles of dry sausages

The effects of the co-inoculation of Debaryomyces hansenii separately with 3 lactic acid bacteria(LAB),Lactobacillus sakei,Lactobacillus plantarum and Lactobacillus curvatus,on the taste and odour profi les of dry sausages were investigated.The co-inoculated sausages showed higher free amino acid and organic acid contents than the non-inoculated control and sausages inoculated with D.hansenii alone.Meanwhile,the sausages inoculated with D.hansenii+L.plantarum,D.hansenii+L.sakei and D.hansenii+L.curvatus had the highest contents of aldehydes,esters and alcohols,respectively.The results of electronic tongue,electronic nose and sensory evaluation demonstrated that compared with the sausage inoculated with D.hansenii,the sour taste and fl oral odour increased and the fatty odour decreased in the sausage inoculated with D.hansenii+L.sakei;this was more favourable for the development of a desirable fl avour in sausages.Moreover,the partial least squares regression analysis indicated that 10 taste and 33 odour compounds were mainly responsible for the differences in the flavour profiles among the sausages.Overall,these findings contributed to a more comprehensive understanding of the formation of sensory characteristics in dry sausages co-inoculated with yeast and LAB.

Allergen degradation of bee pollen by lactic acid bacteria fermentation and its alleviatory effects on allergic reactions in BALB/c mice

Food allergy as a global health problem threatens food industry.Bee pollen(BP)is a typical food with allergenic potentials,although it performs various nutritional/pharmacological functions to humans.In this study,lactic acid bacteria(LAB)were used to ferment Brassica napus BP for alleviating its allergenicity.Four novel allergens(glutaredoxin,oleosin-B2,catalase and lipase)were identified with significant decreases in LAB-fermented BP(FBP)than natural BP by proteomics.Meanwhile,metabolomics analysis showed significant increases of 28 characteristic oligopeptides and amino acids in FBP versus BP,indicating the degradation of LAB on allergens.Moreover,FBP showed alleviatory effects in BALB/c mice,which relieved pathological symptoms and lowered production of allergic mediators.Microbial high-throughput sequencing analysis showed that FBP could regulate gut microbiota and metabolism to strengthen immunity,which were closely correlated with the alleviation of allergic reactivity.These findings could contribute to the development and utilization of hypoallergenic BP products.

Screening of glucosinolates degrading lactic acid bacteria and their utilization in rapeseed meal fermentation

Rapeseed meal is a promising food ingredient, but its utilization is limited by the presence of some potentially harmful ingredients, such as glucosinolates. Fermentation is a cost-effective method of detoxication but a food-grade starter culture with glucosinolates degradation capacity is required. In this study, 46 strains of lactic acid bacteria from traditional paocai brines were screened for their ability to glucosinolate degradation. The results showed that more than 50% of the strains significantly degraded glucosinolates. Two strains of Lactiplantibacillus(p7 and s7) with high capacity of glucosinolates degradation through producing enzymes were identified. Then,an optimized condition for rapeseed meal fermentation by p7 was established to degrade glucosinolates, which can achieve about 80% degradation. UPLC/Q-TOF-MS analysis showed that the degradation rate of individual glucosinolates was different and the degradation rate of gluconapin and progoitrin in rapeseed meal can reach more than 90%. Meanwhile, fermentation with p7 can improve safety of rapeseed meal by inhibiting the growth of Enterobacteriaceae and improve its nutritional properties by degrading phytic acid. The in vitro digestion experiments showed that the content of glucosinolates in rapeseed meal decreased significantly during gastric digestion. Meanwhile, fermentation with p7 can greatly improve the release of soluble protein and increase the contents of free essential amino acids, such as lysine(increased by 12 folds) and methionine(increased by 10 folds).

Preparation of lactic acid bacteria compound starter cultures based on pasting properties and its improvement of glutinous rice flour and dough

The effects of 5 lactic acid bacteria(LAB)fermentation on the pasting properties of glutinous rice flour were compared,and suitable fermentation strains were selected based on the changes of viscosity,setback value,and breakdown value to prepare LAB compound starter cultures.The results revealed that Latilactobacillus sakei HSD004 and Lacticaseibacillus rhamnosus HSD005 had apparent advantages in increasing the viscosity and reducing the setback and breakdown values of glutinous rice flour.In particular,the compound starter created using the two abovementioned LAB in the ratio of 3:1 had better performance than that using a single LAB in improving the pasting properties and increasing the water and oil absorption capacity of glutinous rice flour.Moreover,the gelatinization enthalpy of the fermented samples increased significantly.For frozen glutinous rice dough stored for 28 days,the viscoelasticity of frozen dough prepared by compound starter was better than that of control dough,and the freezable water content was lower than that of control dough.These results indicate that compound LAB fermentation is a promising technology in the glutinous rice-based food processing industry,which has significance for its application.

Application of Next Generation Sequencing for Rapid Identification of Lactic Acid Bacteria

The rapid identification of lactic acid bacteria,which are essential microorganisms in the food industry,is of great significance for industrial applications.The identification of lactic acid bacteria traditionally relies on the isolation and identification of pure colonies.While this method is well-established and widely used,it is not without limitations.The subjective judgment inherent in the isolation and purification process introduces potential for error,and the incomplete nature of the isolation process can result in the loss of valuable information.The advent of next generation sequencing has provided a novel approach to the rapid identification of lactic acid bacteria.This technology offers several advantages,including rapidity,accuracy,high throughput,and low cost.Next generation sequencing represents a significant advancement in the field of DNA sequencing.Its ability to rapidly and accurately identify lactic acid bacteria strains in samples with insufficient information or in the presence of multiple lactic acid bacteria sets it apart as a valuable tool.The application of this technology not only circumvents the potential errors inherent in the traditional method but also provides a robust foundation for the expeditious identification of lactic acid bacteria strains and the authentication of bacterial powder in industrial applications.This paper commences with an overview of traditional and molecular biology methods for the identification of lactic acid bacteria.While each method has its own advantages,they are not without limitations in practical application.Subsequently,the paper provides an introduction of the principle,process,advantages,and disadvantages of next generation sequencing,and also details its application in strain identification and rapid identification of lactic acid bacteria.The objective of this study is to provide a comprehensive and reliable basis for the rapid identification of industrial lactic acid bacteria strains and the authenticity identification of bacterial powder.

Synergism of Zinc Oxide/Organoclay-Loaded Poly(lactic acid) Hybrid Nanocomposite Plasticized by Triacetin for Sustainable Active Food Packaging

The synergistic effect of organoclay(OC)and zinc oxide(ZnO)nanoparticles on the crucial properties of poly(lactic acid)(PLA)nanocompositefilms was systematically investigated herein.After their incorporation into PLA via the solvent casting technique,the water vapor barrier property of the PLA/OC/ZnOfilm improved by a maximum of 86%compared to the neat PLAfilm without the deterioration of Young’s modulus or the tensile strength.Moreover,thefilm’s self-antibacterial activity against foodborne pathogens,including gram-negative(Escherichia coli,E.coli)and gram-positive(Staphylococcus aureus,S.aureus)bacteria,was enhanced by a max-imum of approximately 98–99%compared to the neat PLAfilm.Furthermore,SEM images revealed the homo-geneous dispersion of both nano-fillers in the PLA matrix.However,the thermal stability of thefilm decreased slightly after the addition of the OC and ZnO.Thefilm exhibited notable light barrier properties in the UV-Vis range.Moreover,the incorporation of a suitable biodegradable plasticizer significantly decreased the Tg and notably enhanced theflexibility of the nanocompositefilm by increasing the elongation at break approxi-mately 1.5-fold compared to that of the neat PLAfilm.This contributes to its feasibility as an active food packa-ging material.

Poly(lactic acid)-aspirin microspheres prepared via the traditional and improved solvent evaporation methods and its application performances

Drug-loaded microspheres are significant for the development of modern pharmaceutical products. It is well known that the taken of aspirin for long-term increases the risk of serious gastrointestinal complications, therefore a controllable delivery of aspirin is of importance to lighten those side effects. In this work, poly(lactic acid)(PLA) was chosen as the carrier to prepare PLA-aspirin microspheres by using the traditional and the improved solvent evaporation methods. It was found that no matter which experimental condition was, the encapsulation efficiency of aspirin was higher by using the improved method than that of the traditional method. Specifically, when the concentration of polyvinyl alcohol = 1%(mass),the polymer concentration = 1:20, the oil/water rate = 1:2.5, PLA-aspirin microspheres were obtained via the improved method with a high yield of 82.83%(mass) and an encapsulation efficiency of 44.09%. PLAaspirin microspheres were then prepared continuously using the improved method, which further enhanced the encapsulation efficiency to 54.56%. Approximate 85% aspirin released from microspheres within 7 days. Obvious degradation which was represented by reduction on hardness was observed by soaking microspheres in PBS for 60 days. This work is of interest because it provides a continuous route to prepare PLA-aspirin microspheres continuously with a high drug encapsulation efficiency.

3D printed lactic acid bacteria hydrogel:cell release kinetics and stability

In this study,a new type of 3 D printed living biological hydrogel was developed by integrating lactic acid bacteria(LAB)into biocompatible and non-toxic polymer materials.Interestingly,the living materials loaded with LAB can be freeze-dried and reused for more than 100 times.The bio-hydrogel can be used to co-culture different LAB and keep its fermentation performance stable in long-term use.The release kinetics model and response surface method were used to simulate and optimize the bacteria release mode in the bio-hydrogel.The results show that the release of bacteria from hydrogel is regulated by the coupling of Fickian diffusion and polymer swelling.The stability of LAB hydrogel was evaluated by reuse experiments.The images of confocal microscopy and scanning electron microscope showed that the bacteria with high cell viability were distributed in the hydrogel and intact structure of the living hydrogel was maintained after 100 times of reuse as yoghurt starter.In conclusion,the 3 D printed LAB bio-hydrogel developed in this study has the advantage of reuse and sustainability,which is expected to open up a new way for the preparation of food culture starter.

Hydrothermal conversion of fructose to lactic acid and derivatives:Synergies of metal and acid/base catalysts

With increasing strict regulation on single-use plastics,lactic acid(LA)and alkyl lactates,as essential monomers for bio-degradable polylactic acid(PLA)plastic products,have gained worldwide attention in both academia and industry.While LA is still dominantly produced through fermentation processes from start,chemical synthesis from cellulosic biomass remains a grand challenge,owing to poor selectivity in activating CAH and CAC bonds in sugar molecules.To our best knowledge,recent publications have been focused on hydrothermal conversion of glucose to LA,while this review summarizes the highlights on direct thermal conversion of fructose as starting material to LA and derivatives.In particular,the synergies of metal/metal cations and acid/base catalysts will be critically revised on retro-aldol and dehydration reactions.This work will provide insights into rational design of active and selective catalysts for the production of carboxylic acids from biomass feedstocks.

Effects of lactic acid bacteria-fermented formula milk supplementation on ileal microbiota,transcriptomic profile,and mucosal immunity in weaned piglets

Background:Lactic acid bacteria(LAB)participating in milk fermentation naturally release and enrich the fermented dairy product with a broad range of bioactive metabolites,which has numerous roles in the intestinal health-promot-ing of the consumer.However,information is lacking regarding the application prospect of LAB fermented milk in the animal industry.This study investigated the effects of lactic acid bacteria-fermented formula milk(LFM)on the growth performance,intestinal immunity,microbiota composition,and transcriptomic responses in weaned piglets.A total of 24 male weaned piglets were randomly divided into the control(CON)and LFM groups.Each group consisted of 6 replicates(cages)with 2 piglets per cage.Each piglet in the LFM group were supplemented with 80 mL LFM three times a day,while the CON group was treated with the same amount of drinking water.Results:LFM significantly increased the average daily gain of piglets over the entire 14 d(P<0.01)and the average daily feed intake from 7 to 14 d(P<0.05).Compared to the CON group,ileal goblet cell count,villus-crypt ratio,sIgA,and lactate concentrations in the LFM group were significantly increased(P<0.05).Transcriptomic analysis of ileal mucosa identified 487 differentially expressed genes(DEGs)between two groups.Especially,DEGs involved in the intestinal immune network for IgA production pathways,such as polymeric immunoglobulin receptor(PIGR),were significantly up-regulated(P<0.01)by LFM supplementation.Moreover,trefoil factor 2(TFF2)in the LFM group,one of the DEGs involved in the secretory function of goblet cells,was also significantly up-regulated(P<0.01).Sequenc-ing of the 16S rRNA gene of microbiota demonstrated that LFM led to selective enrichment of lactate-producing and short-chain fatty acid(SCFA)-producing bacteria in the ileum,such as an increase in the relative abundance of Entero-coccus(P=0.09)and Acetitomaculum(P<0.05).Conclusions:LFM can improve intestinal health and immune tolerance,thus enhancing the growth performance of weaned piglets.The changes in microbiota and metabolites induced by LFM might mediate the regulation of the secretory function of goblet cells.

Selective oxidation of glycerol to lactic acid over activated carbon supported Pt catalyst in alkaline solution

Pt/activated carbon （Pt/AC） catalyst combined with base works efficiently for lactic acid production from glycerol under mild conditions. Base type （LiOH, NaOH, KOH, or Ba（OH）2） and base/glycerol molar ratio significantly affected the catalytic performance. The corresponding lactic acid selectivity was in the order of LiOH〉NaOH〉KOH〉Ba（OH）2. An increase in LiOH/glycerol molar ratio ele‐vated the glycerol conversion and lactic acid selectivity to some degree, but excess LiOH inhibited the transformation of glycerol to lactic acid. In the presence of Pt/AC catalyst, the maximum selec‐tivity of lactic acid was 69.3% at a glycerol conversion of 100% after 6 h at 90 °C, with a Li‐OH/glycerol molar ratio of 1.5. The Pt/AC catalyst was recycled five times and was found to exhibit slightly decreased glycerol conversion and stable lactic acid selectivity. In addition, the experimental results indicated that reaction intermediate dihydroxyacetone was more favorable as the starting reagent for lactic acid formation than glyceraldehyde. However, the Pt/AC catalyst had adverse effects on the intermediate transformation to lactic acid, because it favored the catalytic oxidation of them to glyceric acid.

Diversity and Phylogenetic Analysis of Lactic Acid in Forage of Xinjiang Uigur Autonomous Region

[Objective] The aim was to conduct preliminary investigation and diversity analysis of lactic acid bacteria resources in forage from Turpan of Xinjiang. [Method] The lactic acid bacteria in the three kinds of forage ingredients in Xinjiang were isolated by using plate separation method and screened by MRS＋CaCO3 solid medium. Morphological, physiological and biochemical identification and 16S rDNA gene sequence analysis were carried out to the isolated eighty strains of lactic acid bacteria, to explore its taxonomic status. [Result] Twenty strains of lactic acid bacteria were obtained from alfalfa, forty-one from wheat, and nineteen from corn. The physiological and biochemical identification and 16S rDNA gene sequence analysis results showed that the eighty strains of lactic acid bacteria belonged to two genera, namely, Lactobacillus, Enterococcus; 7 species, Lactobacillus casei, Lactobacillus rhamnosus, Lactobacillus paracasei, Entercoccus faecium, Entercoccus durans, Lactobacillus plantarum, Entercoccus hirae. Lactobacillus casei and Entercoccus faecium were ubiquitous in the three kinds of forage ingredients. Besides these two lactic acid bacteria, there were Lactobacillus rhamnosus, Lactobacillus paracasei, Lactobacillus plantarum in wheat, Lactobacillus plantarum, Lactobacillus paracasei, Entercoccus hirae, Entercoccus durans in alfalfa, Lactobacillus plantarum, Entercoccus durans in corn. [Conclusion] There is a big diversity of lactic acid bacteria in different forage from Turpan of Xinjiang, in which Lactobacillus casei, Entercoccus faecium are the key bacteria for forage fermentation.

脓毒症患者连续性血液净化治疗前后PCT Trx-1D-Lac表达及意义

目的:探讨脓毒症患者连续性血液净化(CBP)治疗前后血清降钙素原(PCT)、硫氧还蛋白-1(Trx-1)、D-乳酸(D-Lac)水平变化,分析其对CBP疗效的预测价值及临床意义。方法:选取2021年1月至2022年12月本院100例脓毒症患者作为观察组,另遵循1∶1配对原则,选取100例健康体检者作为对照组。统计两组血清PCT、Trx-1、D-Lac水平。观察组接受CBP治疗,依据治疗效果分为存活亚组、死亡亚组。比较不同亚组血清PCT、Trx-1、D-Lac水平、急性生理学与慢性健康状况Ⅱ评分(APACHEⅡ)及治疗前后其变化差值。Pearson分析各血清指标水平变化差值与APACHEⅡ评分相关性。采用受试者工作特征曲线(ROC)及曲线下面积(AUC)分析各血清指标水平变化差值对疗效的预测价值。采用卡普兰-迈耶(Kaplan-Meier)分析不同血清表达者28d内生存状况。结果:观察组血清PCT、Trx-1、D-Lac水平高于对照组(P<0.05);治疗1周后,死亡亚组血清PCT、Trx-1、D-Lac水平及APACHEⅡ评分高于存活亚组,且变化差值小于存活亚组(P<0.05);各血清指标水平变化差值与APACHEⅡ评分呈正相关(P<0.05);各血清指标水平变化差值联合预测CBP疗效的AUC分别大于单一指标预测、各血清指标联合预测(P<0.05);PCT、Trx-1、D-Lac水平变化差值高表达者死亡风险分别是低表达的4.828、3.600、2.318倍,且生存率高于低表达者(P<0.05)。结论:脓毒症患者CBP治疗前后血清PCT、Trx-1、D-Lac水平变化可反映病情严重程度,且与28d内生存情况密切相关,联合检测其变化差值对CBP疗效具有一定预测价值。

Alkali-metal-modified ZSM-5 zeolites for improvement of catalytic dehydration of lactic acid to acrylic acid

Various ZSM-5 zeolites modified with alkali metals （Li, Na, K, Rb, and Cs） were prepared using ion exchange. The catalysts were used to enhance the catalytic dehydration of lactic acid （LA） to acrylic acid （AA）. The effects of cationic species on the structures and surface acid-base distributions of the ZSM-5 zeolites were investigated. The important factors that affect the catalytic performance were also identified. The modified ZSM-5 catalysts were characterized using X-ray diffraction, tempera- ture-programmed desorptions of NH3 and CO2, pyridine adsorption spectroscopy, and N2 adsorption to determine the crystal phase structures, surface acidities and basicities, nature of acid sites, specific surface areas, and pore volumes. The results show that the acid-base sites that are adjusted by alkali-metal species, particularly weak acid-base sites, are mainly responsible for the formation of AA. The KZSM-5 catalyst, in particular, significantly improved LA conversion and AA selectivity because of the synergistic effect of weak acid-base sites. The reaction was conducted at different reaction temperatures and liquid hourly space velocities （LHSVs） to understand the catalyst selectivity for AA and trends in byproduct formation. Approximately 98% LA conversion and 77% AA selectivity were achieved using the KZSM-5 catalyst under the optimum conditions （40 wt% LA aqueous solution, 365 ℃, and LHSV 2 h-1）.

Effects of alkaline additives on the formation of lactic acid in sorbitol hydrogenolysis over Ni/C catalyst

Lactic acid is produced as a major byproduct during sorbitol hydrogenolysis under alkaline conditions.We investigated the effects of two different alkaline additives,Ca（OH）2 and La（OH）3,on lactic acid formation during sorbitol hydrogenolysis over Ni/C catalyst.In the case of Ca（OH）2,the selectivity of lactic acid was 8.9%.In contrast,the inclusion of La（OH）3 resulted in a sorbitol conversion of 99% with only trace quantities of lactic acid being detected.In addition,the total selectivity towards the C2 and C4 products increased from 20.0% to 24.5% going from Ca（OH）2 to La（OH）3.These results therefore indicated that La（OH）3 could be used as an efficient alkaline additive to enhance the conversion of sorbitol.Pyruvic aldehyde,which is formed as an intermediate during sorbitol hydrogenolysis,can be converted to both 1,2-propylene glycol and lactic acid by hydrogenation and rearrangement reactions,respectively.Notably,these two reactions are competitive.When Ca（OH）2 was used as an additive for sorbitol hydrogenolysis,both the hydrogenation and rearrangement reactions occurred.In contrast,the use of La（OH）3 favored the hydrogenation reaction,with only trace quantities of lactic acid being formed.

Effect of lactic acid bacteria and propionic acid on conservation characteristics,aerobic stability and in vitro gas production kinetics and digestibility of whole-crop corn based total mixed ration silage

This study was conducted to evaluate the effect of lactic acid bacteria and propionic acid on the fermentation quality, aer- obic stability and in vitro gas production kinetics and digestibility of whole-crop corn based totalmixed ration （TMR） silage. Total mixed ration was ensiled with four treatments： （1） no additives （control）; （2） an inoculant （Lactobacillus plantarum） （L）; （3） propionicacid （P）; （4） propionic acid＋lactic acid bacteria （PL）. All treatments were ensiled in laboratory-scale silos for 45 days, and then subjected to an aerobic stability test for12 days. Further, four TMR silages were incubated in vitro with buffered rumen fluid to study in vitro gas production kinetics and digestibility. The results indicated that all TMR silages had good fermentation characteristics with low pH （〈3.80） and ammonia nitrogen （NH3-N） contents, and high lactic acid contents as well as Flieg points. Addition of L further improved TMR silage quality with more lactic acid production. Addition of P and PL decreased lactic acid and NH3-N contents of TMR silage compared to the control （P〈0.05）. After 12 days aerobic exposure, P and PL silages remained stable, but L and the control silages deteriorated as indicated by a reduction in lactic acid and an increase in pH, and numbers of yeast. Compared to the control, addition of L had no effects on TMR silage in terms of 72 h cumulative gas production, in vitro dry matter digestibility, metabolizable energy, net energy for lactation and short chain fatty acids, whereas addition of PL significantly （P〈0.05） increased them. L silage had higher （P〈0.05） in vitro neutral detergent fiber digestibility than the control silage. The results of our study suggested that TMR silage prepared with whole-crop corn can be well preserved with or without additives. Furthermore, the findings of this study suggested that propionic acid is compatible with lactic acid bacteria inoculants, and when used together, although they reduced lactic acid production of TMR silage, they improved aerobic stability and in vitro nutrients digestibility of TMR silage.

Effects of lactic acid bacteria isolated from fermented mustard on lowering cholesterol

Objective:To evaluate the ability of lactic acid bacteria(LAB)strains isolated from fermented mustard to lower the cholesterol in vitro.Methods:The ability of 50 LAB strains isolated from fermented mustard on lowering cholesterol in vitro was determined by modified o-phtshalaldehyde method.The LAB isolates were analyzed for their resistance to acid and bile salt.Strains with lowering cholesterol activity,were determined adherence to Caco-2 cells.Results:Strain B0007,B0006 and B0022 assimilated more cholesterol than BCRC10474 and BCRC17010.The isolated strains showed tolerance to pH 3.0 for 3h despite variations in the degree of viability and bile-tolerant strains,with more than 10~s CFU/mL after incubation for 24 h at 1%oxigall in MRS.In addition,strain B0007 and B0022 identified as Lactobacillus plantarum with 16S rDNA sequences were able to adhere to the Caco-2 cell lines.Conclusions:These strains B0007 and B0022 may be potential functional sources for cholesterollowering activities as well as adhering to Caco-2 cell lines.

Influence of lactic acid bacteria, cellulase, cellulase-producing Bacillus pumilus and their combinations on alfalfa silage quality

This study assessed the effects of lactic acid bacteria(LAB), cellulase, cellulase-producing Bacillus pumilus and their combinations on the fermentation characteristics, chemical composition, bacterial community and in vitro digestibility of alfalfa silage. A completely randomized design involving a 8(silage additives)×3 or 2(silage days) factorial arrangement of treatments was adopted in the present study. The 8 silage additive treatments were: untreated alfalfa(control); two commercial additives(GFJ and Chikuso-1); an originally selected LAB(Lactobacillus plantarum a214) isolated from alfalfa silage; a cellulase-producing Bacillus(CB) isolated from fresh alfalfa; cellulase(C); and the combined additives(a214+C and a214+CB). Silage fermentation characteristics, chemical composition and microorganism populations were analysed after 30, 60 and 65 days(60 days followed by exposure to air for five additional days). In vitro digestibility was analysed for 30 and 60 days. Compared with the other treatments, selected LAB a214, a214 combined with either C or CB, and Chikuso-1 had the decreased(P<0.001) pH and increased(P<0.001) lactic acid concentrations during the ensiling process, and there were no differences(P>0.05) among them. Fiber degradation was not significant(P≥0.054) in any C or CB treatments. The a214 treatment showed the highest(P=0.009) in vitro digestibility of dry matter(595.0 g kg–1DM) after ensiling and the highest abundance of Lactobacillus(69.42 and 79.81%, respectively) on days 60 and 65, compared to all of other treatments. Overall, the silage quality of alfalfa was improved with the addition of a214, which indicates its potential as an alfalfa silage inoculant.