Through rolling experiments and interfacial tensile strength tests of cross-wedge rolled laminated shafts of 42CrMo/Q235 composites, the influence of process parameters, including forming angle, spreading angle, area ...Through rolling experiments and interfacial tensile strength tests of cross-wedge rolled laminated shafts of 42CrMo/Q235 composites, the influence of process parameters, including forming angle, spreading angle, area reduction, rolling temperature and core material diameter on the interfacial shear strength was analyzed. The results show that the sequence of process parameters in order of greatest influence on interfacial tensile strength was rolling temperature, area reduction, core material diameter, forming angle and spreading angle. At the interface of the combined materials, tensile strength decreased as forming angle and spreading angle increased, whereas the tensile strength first increased and then decreased as area reduction, rolling temperature and core material diameter increased.展开更多
基金This project was supported by the National Natural Science Foundation of China （Grant Nos. 51405248 and 51475247）, the Key Research and Development Program of Shandong Province （Grant No. 2016ZDJQ0604）, the Natural Science Foundation of Zhejiang Province （Grant No. LY18E050006）, Natural Science Foundation of Ningbo City （Grant No. 2017A610088） and the K.C. Wong Magna Fund in Ningbo University.
文摘Through rolling experiments and interfacial tensile strength tests of cross-wedge rolled laminated shafts of 42CrMo/Q235 composites, the influence of process parameters, including forming angle, spreading angle, area reduction, rolling temperature and core material diameter on the interfacial shear strength was analyzed. The results show that the sequence of process parameters in order of greatest influence on interfacial tensile strength was rolling temperature, area reduction, core material diameter, forming angle and spreading angle. At the interface of the combined materials, tensile strength decreased as forming angle and spreading angle increased, whereas the tensile strength first increased and then decreased as area reduction, rolling temperature and core material diameter increased.
