Two Monte Carlo-based simulators for imaging-system modeling and projection simulation of flat-panel X-ray source

The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and resolving overlapping projection issues in FPXS.The conventional analytical ray-tracing approach is limited by the number of patterns and is not applicable to FPXS-projection calculations.However,the computation time of Monte Carlo(MC)simulation is independent of the size of the patterned arrays in FPXS.This study proposes two high-efficiency MC projection simulators for FPXS:a graphics processing unit(GPU)-based phase-space sampling MC(gPSMC)simulator and GPU-based fluence sampling MC(gFSMC)simulator.The two simulators comprise three components:imaging-system modeling,photon initialization,and physical-interaction simulations in the phantom.Imaging-system modeling was performed by modeling the FPXS,imaging geometry,and detector.The gPSMC simulator samples the initial photons from the phase space,whereas the gFSMC simulator performs photon initialization from the calculated energy spectrum and fluence map.The entire process of photon interaction with the geometry and arrival at the detector was simulated in parallel using multiple GPU kernels,and projections based on the two simulators were calculated.The accuracies of the two simulators were evaluated by comparing them with the conventional analytical ray-tracing approach and acquired projections,and the efficiencies were evaluated by comparing the computation time.The results of simulated and realistic experiments illustrate the accuracy and efficiency of the proposed gPSMC and gFSMC simulators in the projection calculation of various phantoms.

Application of Patient Simulators Combined with Internet plus Scenario Simulation Teaching Models on Intravenous Infusion Nursing Education in China

Objective: To explore the effectiveness of applying patient simulators combined with Internet Plus scenario simulation teaching models on intravenous (IV) infusion nursing education, and to provide scientific evidence for the implementation of advanced teaching models in future nursing education. Methods: Enrolled 60 nurses who took the IV infusion therapy training program in our hospital from January 2022 to December 2023 for research. 30 nurses who were trained in traditional teaching models from January to December 2022 were selected as the control group, and 30 nurses who were trained with simulation-based teaching models with methods including simulated patients, internet, online meetings which can be replayed and scenario simulation, etc. from January to December 2023 were selected as the experimental group. Evaluated the learning outcomes based on the Competency Inventory for Nursing Students (CINS), Problem-Solving Inventory (PSI), comprehensive learning ability, scientific research ability, and proficiency in the theoretical knowledge and practical skills of IV infusion therapy. Nursing quality, the incidence of IV infusion therapy complications and nurse satisfaction with different teaching models were also measured. Results: The scientific research ability, PSI scores, CINS scores, and comprehensive learning ability of the experimental group were better than those of the control group (P 0.05), and their assessment results of practical skills, nursing quality of IV infusion therapy during training, and satisfaction with teaching models were all better than those of the control group with statistical significance (P < 0.05). The incidence of IV infusion therapy complications in the experimental group was lower than that in the control group, indicating statistical significance (P < 0.05). Conclusions: Teaching models based on patient simulators combined with Internet Plus scenario simulation enable nursing students to learn more directly and practice at any time and in any place, and can improve their proficiency in IV infusion theoretical knowledge and skills (e.g. PICC catheterization), core competencies, problem-solving ability, comprehensive learning ability, scientific research ability and the ability to deal with complicated cases. Also, it helps provide high-quality nursing education, improve the nursing quality of IV therapy, reduce the incidence of related complications, and ensure the safety of patients with IV therapy.

Transurethral resection of bladder tumor: A systematic review of simulator-based training courses and curricula

Objective:Transurethral resection of bladder tumor is one of the most common everyday urological procedures.This kind of surgery demands a set of skills that need training and experience.In this review,we aimed to investigate the current literature to find out if simulators,phantoms,and other training models could be used as a tool for teaching urologists.Methods:A systematic review was performed according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses statement and the recommendations of the European Association of Urology guidelines for conducting systematic reviews.Fifteen out of 932 studies met our inclusion criteria and are presented in the current review.Results:The UroTrainer(Karl Storz GmbH,Tuttlingen,Germany),a virtual reality training simulator,achieved positive feedback and an excellent face and construct validity by the participants.The inspection of bladder mucosa,blood loss,tumor resection,and procedural time was improved after the training,especially for inexperienced urologists and medical students.The construct validity of UroSim®(VirtaMed,Zurich,Switzerland)was established.SIMBLA simulator(Samed GmbH,Dresden,Germany)was found to be a realistic and useful tool by experts and urologists with intermediate experience.The test objective competency model based on SIMBLA simulator could be used for evaluating urologists.The porcine model of the Asian Urological Surgery Training and Education Group also received positive feedback by the participants that tried it.The Simulation and Technology Enhanced Learning Initiative Project had an extraordinary face and content validity,and 60%of participants would like to use the simulators in the future.The 5-day multimodal training curriculum“Boot Camp”in the United Kingdom achieved an increase of the level of confidence of the participants that lasted months after the project.Conclusion:Simulators and courses or curricula based on a simulator training could be a valuable learning tool for any surgeon,and there is no doubt that they should be a part of every urologist's technical education.

Blast waveform tailoring using controlled venting in blast simulators and shock tubes

A critical challenge of any blast simulation facility is in producing the widest possible pressure-impulse range for matching against equivalent high-explosive events.Shock tubes and blast simulators are often constrained with the lack of effective ways to control blast wave profiles and as a result have a limited performance range.Some wave shaping techniques employed in some facilities are reviewed but often necessitate extensive geometric modifications,inadvertently cause flow anomalies,and/or are only applicable under very specific configurations.This paper investigates controlled venting as an expedient way for waveforms to be tuned without requiring extensive modifications to the driver or existing geometry and could be widely applied by existing and future blast simulation and shock tube facilities.The use of controlled venting is demonstrated experimentally using the Advanced Blast Simulator(shock tube)at the Australian National Facility of Physical Blast Simulation and via numerical flow simulations with Computational Fluid Dynamics.Controlled venting is determined as an effective method for mitigating the impact of re-reflected waves within the blast simulator.This control method also allows for the adjustment of parameters such as tuning the peak overpressure,the positive phase duration,and modifying the magnitude of the negative phase and the secondary shock of the blast waves.This paper is concluded with an illustration of the potential expanded performance range of the Australian blast simulation facility when controlled venting for blast waveform tailoring as presented in this paper is applied.

基于Power World Simulator的地区电网静态安全稳定性分析

电力系统具有良好的稳定性是保证电网正常运行的关键,充分应用Power World Simulator电力系统仿真软件对我国西北某地区实际电网进行安全稳定性分析。根据给定的实际电网运行数据搭建电网模型并进行潮流计算,将潮流计算结果与静态安全理论相结合,对该地区电网模型进行N-1静态安全性分析。针对线路负载率过高以及节点母线电压越限的情况,提出解决措施以达到提高电网运行稳定性的目的。

UltraStar:A Lightweight Simulator of Ultra-Dense LEO Satellite Constellation Networking for 6G

The mega-constellation network has gained significant attention recently due to its great potential in providing ubiquitous and high-capacity connectivity in sixth-generation(6G)wireless communication systems.However,the high dynamics of network topology and large scale of mega-constellation pose new challenges to the constellation simulation and performance evaluation.In this paper,we introduce UltraStar,a lightweight network simulator,which aims to facilitate the complicated simulation for the emerging mega-constellation of unprecedented scale.Particularly,a systematic and extensible architecture is proposed,where the joint requirement for network simulation,quantitative evaluation,data statistics and visualization is fully considered.For characterizing the network,we make lightweight abstractions of physical entities and models,which contain basic representatives of networking nodes,structures and protocol stacks.Then,to consider the high dynamics of Walker constellations,we give a two-stage topology maintenance method for constellation initialization and orbit prediction.Further,based on the discrete event simulation(DES)theory,a new set of discrete events is specifically designed for basic network processes,so as to maintain network state changes over time.Finally,taking the first-generation Starlink of 11927 low earth orbit(LEO)satellites as an example,we use UltraStar to fully evaluate its network performance for different deployment stages,such as characteristics of constellation topology,performance of end-to-end service and effects of network-wide traffic interaction.The simulation results not only demonstrate its superior performance,but also verify the effectiveness of UltraStar.

基于Plant Simulation的化纤自动落丝系统仿真实验分析

基于Plant Simulation软件,构建一种化纤自动落丝系统的3D数字化模型,对系统效率关键输入因子进行参数化设置,将系统各工位三维数字模型导入软件中建立层次化运动机构图形结构,并运用Simltalk语言实现三维动作仿真,通过基础物理参数设置,保证了仿真数字化模型与现实系统更具一致性。通过多级实验设计分析了系统影响因子对于系统效率的影响特性曲线,并进一步通过动态参数化实验方法,计算出双输入因子对系统效能影响的敏感度。该实验结果可为化纤自动落丝系统的建设成本控制与可行性分析提供指导,具有较好的工程应用价值。

基于Simulation X的多轴转向系统功能安全仿真分析

基于ISO 26262《道路车辆功能安全》的标准要求,对特种车的多轴电液转向系统进行分析,以提高系统的安全性和可靠性。运用Simulation X软件建立详细的多轴特种车仿真模型,通过模拟故障模式注入进行仿真试验。对仿真结果和数据进行分析,评估得到故障的严重性、暴露度和可控性,从而确定相应的汽车安全完整性等级。基于故障注入仿真的汽车功能安全分析方法,在系统早期设计阶段可以作为评估架构安全性的重要手段。

基于Plant Simulation的压气机叶片型线加工产线分析与优化

运用专业仿真软件Plant Simulation,根据压气机叶片型线机械加工工艺特点和物料运行流程建立生产线仿真模型,从产能、设备利用率及产线瓶颈等多方面进行仿真分析与优化。结果表明:Plant Simulation仿真平台的仿真可以找出规划设计方案中存在的问题并验证方案的合理性。该仿真结果为型线机械加工产线的优化设计提供了可靠依据,达到了节约投资成本和缩短设计周期的目的。

基于CarSim/Simulink的计算机控制系统综合实验设计

针对计算机控制系统课程中控制算法设计与仿真实现,设计了基于CarSim/Simulink的控制综合实验方案。以4轮独立驱动小车为对象,要求学生熟悉其基本工作原理,并在非线性动力学模型基础上,进行局部线性近似,设计反馈控制器,模拟小车控制。使用CarSim仿真软件可直观地模拟调整4轮独立驱动小车的质量、质心位置和转动惯量等,实现个性化选择,搭建车辆模型;与Simulink接口互通,在Simulink中完成控制算法。实验设计旨在使学生夯实计算机控制系统的理论基础,并逐步过渡到控制工程,理论联系实际,培养其解决复杂工程问题的能力。

基于Simulink的2PSK调制与解调系统的仿真分析

分析2PSK调制和解调的原理,采用Matlab环境下的Simulink仿真工具箱实现2PSK调制及解调系统的仿真建模与分析。仿真实验表明,仿真结果和理论分析内容一致,验证了仿真模型的正确性。该方法有助于相关研究者直观地理解相移调制与解调系统的组成及工作原理,对实际工程应用也有一定的借鉴作用。

Global hybrid simulations of soft X-ray emissions in the Earth’s magnetosheath

Earth’s magnetopause is a thin boundary separating the shocked solar wind plasma from the magnetospheric plasmas,and it is also the boundary of the solar wind energy transport to the magnetosphere.Soft X-ray imaging allows investigation of the large-scale magnetopause by providing a two-dimensional(2-D)global view from a satellite.By performing 3-D global hybrid-particle-in-cell(hybrid-PIC)simulations,we obtain soft X-ray images of Earth’s magnetopause under different solar wind conditions,such as different plasma densities and directions of the southward interplanetary magnetic field.In all cases,magnetic reconnection occurs at low latitude magnetopause.The soft X-ray images observed by a hypothetical satellite are shown,with all of the following identified:the boundary of the magnetopause,the cusps,and the magnetosheath.Local X-ray emissivity in the magnetosheath is characterized by large amplitude fluctuations(up to 160%);however,the maximum line-of-sight-integrated X-ray intensity matches the tangent directions of the magnetopause well,indicating that these fluctuations have limited impact on identifying the magnetopause boundary in the X-ray images.Moreover,the magnetopause boundary can be identified using multiple viewing geometries.We also find that solar wind conditions have little effect on the magnetopause identification.The Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)mission will provide X-ray images of the magnetopause for the first time,and our global hybrid-PIC simulation results can help better understand the 2-D X-ray images of the magnetopause from a 3-D perspective,with particle kinetic effects considered.

Importance of Photo-Realistic and Dedicated Simulator in Agricultural Robotics

Agricultural robotics is a comparatively new field. Recently, it has gotten special attention because of agricultural labor shortages and rising labor costs. With the increasing operational use of agricultural robots, the need for a dedicated robotic simulator for such activity has been noted here. The need of a dedicated and specialty simulator for agricultural robotics research is the main focus area of this paper. Moreover, limitations have been pointed out when conventional robot simulators are used directly in agricultural settings. In a nutshell, it has been tried to emphasize that a dedicated simulator for agricultural robotics would be a timely advance and would accelerate the growth of agricultural robots.

The Probability Density Function Related to Shallow Cumulus Entrainment Rate and Its Influencing Factors in a Large-Eddy Simulation

The process of entrainment-mixing between cumulus clouds and the ambient air is important for the development of cumulus clouds.Accurately obtaining the entrainment rate(λ)is particularly important for its parameterization within the overall cumulus parameterization scheme.In this study,an improved bulk-plume method is proposed by solving the equations of two conserved variables simultaneously to calculateλof cumulus clouds in a large-eddy simulation.The results demonstrate that the improved bulk-plume method is more reliable than the traditional bulk-plume method,becauseλ,as calculated from the improved method,falls within the range ofλvalues obtained from the traditional method using different conserved variables.The probability density functions ofλfor all data,different times,and different heights can be well-fitted by a log-normal distribution,which supports the assumed stochastic entrainment process in previous studies.Further analysis demonstrate that the relationship betweenλand the vertical velocity is better than other thermodynamic/dynamical properties;thus,the vertical velocity is recommended as the primary influencing factor for the parameterization ofλin the future.The results of this study enhance the theoretical understanding ofλand its influencing factors and shed new light on the development ofλparameterization.

基于Simulation的薄壁桶搬运过程的形变研究

桶料的搬运方式主要有托底式、夹取式和挂取(吊取)式,文中针对薄壁桶的搬运方式进行模拟分析,通过模拟分析的具体数值来进行合理的选择。主要对挂取(吊取)和夹取2种薄壁桶的搬运方式进行模拟分析,基于Soildworks中的Simulation进行计算,并得出具体数值,选取合理的薄壁桶搬运方式。模拟分析表明:在同等桶壁厚的情况下,夹取式桶料搬运形式薄壁桶的变形程度较大,主要体现在薄壁桶的夹持部位,如特定场景需夹持薄壁桶的桶身进行搬运时,还需适当加厚薄壁桶的桶壁来抵抗夹持板的夹持力,使薄壁桶不会产生较大的形变量。

Magnetopause properties at the dusk magnetospheric flank from global magnetohydrodynamic simulations,the kinetic Vlasov equilibrium,and in situ observations--Potential implications for SMILE

We derived the properties of the terrestrial magnetopause(MP)from two modeling approaches,one global–fluid,the other local–kinetic,and compared the results with data collected in situ by the Magnetospheric Multiscale 2(MMS2)spacecraft.We used global magnetohydrodynamic(MHD)simulations of the Earth’s magnetosphere(publicly available from the NASA-CCMC[National Aeronautics and Space Administration–Community Coordinated Modeling Center])and local Vlasov equilibrium models(based on kinetic models for tangential discontinuities)to extract spatial profiles of the plasma and field variables at the Earth’s MP.The global MHD simulations used initial solar wind conditions extracted from the OMNI database at the time epoch when the MMS2 observes the MP.The kinetic Vlasov model used asymptotic boundary conditions derived from the same in situ MMS measurements upstream or downstream of the MP.The global MHD simulations provide a three-dimensional image of the magnetosphere at the time when the MMS2 crosses the MP.The Vlasov model provides a one-dimensional local view of the MP derived from first principles of kinetic theory.The MMS2 experimental data also serve as a reference for comparing and validating the numerical simulations and modeling.We found that the MP transition layer formed in global MHD simulations was generally localized closer to the Earth(roughly by one Earth radius)from the position of the real MP observed by the MMS.We also found that the global MHD simulations overestimated the thickness of the MP transition by one order of magnitude for three analyzed variables:magnetic field,density,and tangential speed.The MP thickness derived from the local Vlasov equilibrium was consistent with observations for all three of these variables.The overestimation of density in the Vlasov equilibrium was reduced compared with the global MHD solutions.We discuss our results in the context of future SMILE(Solar wind Magnetosphere Ionosphere Link Explorer)campaigns for observing the Earth’s MP.

Hybrid-Vlasov simulation of soft X-ray emissions at the Earth’s dayside magnetospheric boundaries

Solar wind charge exchange produces emissions in the soft X-ray energy range which can enable the study of near-Earth space regions such as the magnetopause,the magnetosheath and the polar cusps by remote sensing techniques.The Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)and Lunar Environment heliospheric X-ray Imager(LEXI)missions aim to obtain soft Xray images of near-Earth space thanks to their Soft X-ray Imager(SXI)instruments.While earlier modeling works have already simulated soft X-ray images as might be obtained by SMILE SXI during its mission,the numerical models used so far are all based on the magnetohydrodynamics description of the space plasma.To investigate the possible signatures of ion-kinetic-scale processes in soft Xray images,we use for the first time a global hybrid-Vlasov simulation of the geospace from the Vlasiator model.The simulation is driven by fast and tenuous solar wind conditions and purely southward interplanetary magnetic field.We first produce global X-ray images of the dayside near-Earth space by placing a virtual imaging satellite at two different locations,providing meridional and equatorial views.We then analyze regional features present in the images and show that they correspond to signatures in soft X-ray emissions of mirrormode wave structures in the magnetosheath and flux transfer events(FTEs)at the magnetopause.Our results suggest that,although the time scales associated with the motion of those transient phenomena will likely be significantly smaller than the integration time of the SMILE and LEXI imagers,mirror-mode structures and FTEs can cumulatively produce detectable signatures in the soft X-ray images.For instance,a local increase by 30%in the proton density at the dayside magnetopause resulting from the transit of multiple FTEs leads to a 12%enhancement in the line-of-sight-and time-integrated soft X-ray emissivity originating from this region.Likewise,a proton density increase by 14%in the magnetosheath associated with mirror-mode structures can result in an enhancement in the soft X-ray signal by 4%.These are likely conservative estimates,given that the solar wind conditions used in the Vlasiator run can be expected to generate weaker soft X-ray emissions than the more common denser solar wind.These results will contribute to the preparatory work for the SMILE and LEXI missions by providing the community with quantitative estimates of the effects of small-scale,transient phenomena occurring on the dayside.

基于PreScan/CarSim/Simulink/ROS的路径跟随控制仿真

路径跟随可控制AGV沿着参考轨迹行驶,提高行驶过程中的可行性和稳定性,是智能驾驶核心技术之一。文章主要研究使用Prescan、Carsim、Simulink和ROS系统搭建AGV路径跟随控制模型,运用基于几何模型的Stanley算法来实现路径跟随的联合仿真测试。最后使用树莓派搭建硬件在环的仿真模型,联合仿真验证了Stanley算法的可行性,该方法可快速验证和部署基于ROS系统的路径跟随控制方法,为后续研究奠定技术基础。

SimTech Simulator中单变量控制器的开发与使用

SimTech Simulator是圣泰(北京)工程软件有限公司开发的国产通用化工流程模拟软件,能够对常用炼化装置,如常减压、柴油加氢等常用炼化工艺进行模拟。通用稳态流程模拟有两种流程的计算方法,一种是序贯模块法(SM);一种联立方程法(EO),SM是按照顺序逐个进行单元模块计算,遇到循环需要进行撕裂迭代,用户的规定受到限制;EO是整个流程图设备方程联立求解,用户的规定灵活,但方程数量多时求解困难,对初值要求高。目前的商业流程模拟软件大多数采用序贯模块法,在遇到特殊的用户规定时,就需要使用控制器来进行迭代计算。控制器有单变量控制器和多变量控制器,这里主要描述单变量控制器,单变量控制器需要指定一个控制变量和一个操纵变量,通过调节控制变量使操纵变量达到设定值。文章描述了控制器对序贯模块法计算过程的影响和控制器计算的迭代算法,最后通过两个案例进行验证,一个是天然气的压缩输送工况,设定出口压力和流量,来调节入口压力和流量;另一个是通过控制器来调节加氢装置循环氢的量,与手动设定值相比,与设计值的误差从3%降到了0.05%。

基于Plant Simulation的生产车间仿真优化研究与应用

针对生产车间焊接阶段物料难以齐套引发的工序等待问题,通过使用Plant Simulation仿真软件构建模型,以车间实际生产数据为输入验证仿真模型的可信性,建立方便交互的可视化交互界面,方便模型复用和生产参数的调整.通过仿真模型结合启发式算法优化生产线,保证了生产车间的物料齐套性,缩短了焊接等待时间,提供了一种使用仿真软件进行生产线优化的可行方案.结果表明,所建立的仿真优化模型能够提供高效的排程方案,有效提高了企业生产效率.