A herringbone water-sediment separation structure(hereinafter referred to as "herringbone structure") has been shown to be effective in separating coarse inorganic debris; however, less is known regarding th...A herringbone water-sediment separation structure(hereinafter referred to as "herringbone structure") has been shown to be effective in separating coarse inorganic debris; however, less is known regarding the large wood(LW) filtration effect in this structure. This paper presents preliminary research on the wood filtration effect of the herringbone structure based on physical model tests.The results show that the herringbone structure exhibited effective performance in large wood size segregation, with a 100% component filtration rate for LW that diameter(D) larger than ribbed beam opening width(a). The total filtration rate also exceeded 80% when the Fraud number(Fr) is larger than 2.64 and increased with the increase of Fr. After exceeding Frmax, total filtration rate would be decreased due to overflow. Beside flow condition,structure parameters influence significantly on LW filtration rate. We attempt to explain the filtration process via particle contact trajectory and particle movement trajectory. The inclined angle of ribbed beam(γ) contributed the most variation to the filtration rate via influencing the coincidence with particle contact trajectory and particle movement trajectory. The high sensitivity coefficient of ribbed beam(θ) under relatively low Fr conditions implies remarkable influences on LW filtration effects by causing clogging problem. The ribbed beam opening width(a) together with LW diameter(D) influenced the size segregation performance.展开更多
Studies presenting long-term observations of the recruitment and mobility of large wood in mountain watercourses are scarce,but they can considerably contribute to the knowledge of river/riparian forest interactions a...Studies presenting long-term observations of the recruitment and mobility of large wood in mountain watercourses are scarce,but they can considerably contribute to the knowledge of river/riparian forest interactions and the assessment of flood hazard resulting from wood mobility during floods.Widespread dieback of riparian forest along the headwater course of Kamienica Stream in the Polish Carpathians,caused by bark beetle infestation of spruce trees,has raised concerns about potential increases of large wood recruitment to the stream and of the flood hazard to downstream valley reaches.In October 2009,429 trees growing along three sections of the stream were tagged with numbered metal plates and monitored over 10 years to determine the timing and causes of their delivery to the channel and the lengths of their displacement during individual flood events.Moreover,in 2012 the mode of location of wood deposits and a degree of wood decay were determined in the second-to fourth-order stream reaches.The monitoring of tagged trees indicated that trees were recruited to the channel during highintensity meteorological and hydrological events,mostly as a result of bank erosion during floods or windthrow.With 22%of tagged trees recruited to the channel during 10 years,the rate of turnover of the riparian trees was estimated at 45 years.As the riparian area is overgrown with trees with ages up to^160 years,the rate evidences substantial intensification of large wood recruitment to the channel in the recent period.Results of large wood inventory and the 10-year-long monitoring of tagged trees indicated variable mobility of large wood along the upper course of the stream.Wood mobility was negligible in the second-order stream reach,very small in the third-order reach,and greater,but still limited in the fourth-order reach.Wood is transported longer distances only during major floods.However,the advanced state of decay of most pieces leads to their disintegration during floods,precluding distant transport.Thus,large wood retained in the upper stream course does not constitute an important flood hazard to downstream,inhabited valley reaches.展开更多
Large in-stream wood (LW) is a critical component of riparian systems that increases heterogeneity of flow regimes and provides high quality habitat for salmonids and other fishes. We present four sampling-based ...Large in-stream wood (LW) is a critical component of riparian systems that increases heterogeneity of flow regimes and provides high quality habitat for salmonids and other fishes. We present four sampling-based methods to estimate two-dimensional LW for a 61-hectare river restoration project on the South Fork McKenzie River near Rainbow, OR (USA). We manually delineated LW area, from unoccupied aircraft systems (UAS) multispectral imagery for 40 randomly selected 51.46 m<sup>2</sup> hexagonal plots. Seven auxiliary variables were extracted from the imagery and imagery derivatives to be incorporated in four estimators by summarizing spectral statistics for each plot including Random forest (RF) classification of segmented imagery (Cohen’s kappa = 0.75, balanced accuracy = 0.86). The four estimators were: difference estimator, simple linear regression estimator with one auxiliary variable, general regression estimator with seven auxiliary variables, and simple random sample without replacement. We assessed variance of the estimators and found that the simple random sample without replacement produced the largest estimate for LW area and widest confidence interval (17,283 m<sup>2</sup>, 95% CI 10,613 - 23,952 m<sup>2</sup>) while the generalized regression approach resulted in the smallest estimate and narrowest confidence interval (16,593 m<sup>2</sup>, 95% CI 13,054 - 20,133 m<sup>2</sup>). These methods facilitate efficient estimates of critical habitat components, that are especially suited to efforts that seek to quantify large amounts of these components through time. When combined with traditional sampling methods, classified imagery acquired via UAS promises to enhance the temporal resolution of the data products associated with restoration efforts while minimizing the necessity for potentially hazardous field work.展开更多
基金funded by the National Science and Technology Support Program(2011BAK12B00)the International Cooperation Project of the Department of Science and Technology of Sichuan Province(Grant No.2009HH0005).
文摘A herringbone water-sediment separation structure(hereinafter referred to as "herringbone structure") has been shown to be effective in separating coarse inorganic debris; however, less is known regarding the large wood(LW) filtration effect in this structure. This paper presents preliminary research on the wood filtration effect of the herringbone structure based on physical model tests.The results show that the herringbone structure exhibited effective performance in large wood size segregation, with a 100% component filtration rate for LW that diameter(D) larger than ribbed beam opening width(a). The total filtration rate also exceeded 80% when the Fraud number(Fr) is larger than 2.64 and increased with the increase of Fr. After exceeding Frmax, total filtration rate would be decreased due to overflow. Beside flow condition,structure parameters influence significantly on LW filtration rate. We attempt to explain the filtration process via particle contact trajectory and particle movement trajectory. The inclined angle of ribbed beam(γ) contributed the most variation to the filtration rate via influencing the coincidence with particle contact trajectory and particle movement trajectory. The high sensitivity coefficient of ribbed beam(θ) under relatively low Fr conditions implies remarkable influences on LW filtration effects by causing clogging problem. The ribbed beam opening width(a) together with LW diameter(D) influenced the size segregation performance.
基金financed by the statutory funds of the Institute of Nature Conservation,Polish Academy of Sciencesby the project FLORIST(Flood risk on the northern foothills of the Tatra MountainsPSPB no 153/2010)supported by a grant from Switzerland through the Swiss Contribution to the Enlarged European Union。
文摘Studies presenting long-term observations of the recruitment and mobility of large wood in mountain watercourses are scarce,but they can considerably contribute to the knowledge of river/riparian forest interactions and the assessment of flood hazard resulting from wood mobility during floods.Widespread dieback of riparian forest along the headwater course of Kamienica Stream in the Polish Carpathians,caused by bark beetle infestation of spruce trees,has raised concerns about potential increases of large wood recruitment to the stream and of the flood hazard to downstream valley reaches.In October 2009,429 trees growing along three sections of the stream were tagged with numbered metal plates and monitored over 10 years to determine the timing and causes of their delivery to the channel and the lengths of their displacement during individual flood events.Moreover,in 2012 the mode of location of wood deposits and a degree of wood decay were determined in the second-to fourth-order stream reaches.The monitoring of tagged trees indicated that trees were recruited to the channel during highintensity meteorological and hydrological events,mostly as a result of bank erosion during floods or windthrow.With 22%of tagged trees recruited to the channel during 10 years,the rate of turnover of the riparian trees was estimated at 45 years.As the riparian area is overgrown with trees with ages up to^160 years,the rate evidences substantial intensification of large wood recruitment to the channel in the recent period.Results of large wood inventory and the 10-year-long monitoring of tagged trees indicated variable mobility of large wood along the upper course of the stream.Wood mobility was negligible in the second-order stream reach,very small in the third-order reach,and greater,but still limited in the fourth-order reach.Wood is transported longer distances only during major floods.However,the advanced state of decay of most pieces leads to their disintegration during floods,precluding distant transport.Thus,large wood retained in the upper stream course does not constitute an important flood hazard to downstream,inhabited valley reaches.
文摘Large in-stream wood (LW) is a critical component of riparian systems that increases heterogeneity of flow regimes and provides high quality habitat for salmonids and other fishes. We present four sampling-based methods to estimate two-dimensional LW for a 61-hectare river restoration project on the South Fork McKenzie River near Rainbow, OR (USA). We manually delineated LW area, from unoccupied aircraft systems (UAS) multispectral imagery for 40 randomly selected 51.46 m<sup>2</sup> hexagonal plots. Seven auxiliary variables were extracted from the imagery and imagery derivatives to be incorporated in four estimators by summarizing spectral statistics for each plot including Random forest (RF) classification of segmented imagery (Cohen’s kappa = 0.75, balanced accuracy = 0.86). The four estimators were: difference estimator, simple linear regression estimator with one auxiliary variable, general regression estimator with seven auxiliary variables, and simple random sample without replacement. We assessed variance of the estimators and found that the simple random sample without replacement produced the largest estimate for LW area and widest confidence interval (17,283 m<sup>2</sup>, 95% CI 10,613 - 23,952 m<sup>2</sup>) while the generalized regression approach resulted in the smallest estimate and narrowest confidence interval (16,593 m<sup>2</sup>, 95% CI 13,054 - 20,133 m<sup>2</sup>). These methods facilitate efficient estimates of critical habitat components, that are especially suited to efforts that seek to quantify large amounts of these components through time. When combined with traditional sampling methods, classified imagery acquired via UAS promises to enhance the temporal resolution of the data products associated with restoration efforts while minimizing the necessity for potentially hazardous field work.