A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic mo...A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic model of passive damping vibration reduction tool holder was established,and the optimal damping ratio,optimal frequency ratio,and maximum relative amplitude were derived.Modal analysis of the passive damping vibrationreduction tool holder was conducted using software.The results showed that the maximum response amplitude of the passive damping vibration reduction tool holder decreased significantly compared to the original one.展开更多
The responses of vertical structures, in convective and stratiform regions, to the large-scale forcing during the landfall of tropical storm Bilis （2006） are investigated using the data from a two-dimensional cloud-...The responses of vertical structures, in convective and stratiform regions, to the large-scale forcing during the landfall of tropical storm Bilis （2006） are investigated using the data from a two-dimensional cloud-resolving model simulation. An imposed large-scale forcing with upward motion in the mid and upper troposphere and downward motion in the lower troposphere on 15 July suppresses convective clouds, which leads to -100% coverage of raining stratiform clouds over the entire model domain. The imposed forcing extends upward motion to the lower troposphere during 16-17 July, which leads to an enhancement of convective clouds and suppression of raining stratiform clouds. The switch of large-scale lower-tropospheric vertical velocity from weak downward motion on 15 July to moderate upward motion during 16-17 July produces a much broader distribution of the vertical velocity, water vapor and hydrometeor fluxes, perturbation specific humidity, and total hydrometeor mixing ratio during 16-17 July than those on 15 July in the analysis of contoured frequency-altitude diagrams. Further analysis of the water vapor budget reveals that local atmospheric moistening is mainly caused by the enhancement of evaporation of rain associated with downward motion on 15 July, whereas local atmospheric drying is mainly determined by the advective drying associated with downward motion over raining stratiform regions and by the net condensation associated with upward motion over convective regions during 16-17 July.展开更多
The analytical solutions of the PBL wind distribution under the equilibrium of four forces including both horizontal and vertical advections are obtained in this paper using small parameter method. Utilizing this simp...The analytical solutions of the PBL wind distribution under the equilibrium of four forces including both horizontal and vertical advections are obtained in this paper using small parameter method. Utilizing this simple PBL model, we also compute the wind spirals of a certain circular vortex over level ground and over a west-east ranged mountain, respectively. The results show that when there exsits large-scale orographic forcing,vertical advection may exert considerable influence on the wind distribution of PBL, the angle between geostrophic flow and surface wind, and the height of the top of PBL.展开更多
C523 vertical lathe control circuit uses a relay control method,which has some disadvantages including large size,complex wiring,high failure rate,and maintenance difficulties.To solve these problems,a C523 vertical l...C523 vertical lathe control circuit uses a relay control method,which has some disadvantages including large size,complex wiring,high failure rate,and maintenance difficulties.To solve these problems,a C523 vertical lathe control circuit based on PLC is designed.The electronic requirements of the control circuits,basis of PLC selection,the hardware connection and software design are described.It has been found that the PLC control circuit is simple,reliable and can highly improve the production efficiency.展开更多
基金Science and Technology Research Project of Liaoning Provincial Department of Education:Research on the Application of Damping and Vibration Reduction Technology in Key Components of Machine Tools(JYTMS20230066)The Fund of Liaoning Provincial Natural Science and Technology Foundation Regional Joint(No.2021-YKLH-08).
文摘A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic model of passive damping vibration reduction tool holder was established,and the optimal damping ratio,optimal frequency ratio,and maximum relative amplitude were derived.Modal analysis of the passive damping vibrationreduction tool holder was conducted using software.The results showed that the maximum response amplitude of the passive damping vibration reduction tool holder decreased significantly compared to the original one.
基金supported by the State Key Basic Research Development Program (2004CB418300 and 2009CB421504)the National Natural Science Foundation of China under Grant Nos.40633016 and 40830958
文摘The responses of vertical structures, in convective and stratiform regions, to the large-scale forcing during the landfall of tropical storm Bilis （2006） are investigated using the data from a two-dimensional cloud-resolving model simulation. An imposed large-scale forcing with upward motion in the mid and upper troposphere and downward motion in the lower troposphere on 15 July suppresses convective clouds, which leads to -100% coverage of raining stratiform clouds over the entire model domain. The imposed forcing extends upward motion to the lower troposphere during 16-17 July, which leads to an enhancement of convective clouds and suppression of raining stratiform clouds. The switch of large-scale lower-tropospheric vertical velocity from weak downward motion on 15 July to moderate upward motion during 16-17 July produces a much broader distribution of the vertical velocity, water vapor and hydrometeor fluxes, perturbation specific humidity, and total hydrometeor mixing ratio during 16-17 July than those on 15 July in the analysis of contoured frequency-altitude diagrams. Further analysis of the water vapor budget reveals that local atmospheric moistening is mainly caused by the enhancement of evaporation of rain associated with downward motion on 15 July, whereas local atmospheric drying is mainly determined by the advective drying associated with downward motion over raining stratiform regions and by the net condensation associated with upward motion over convective regions during 16-17 July.
文摘The analytical solutions of the PBL wind distribution under the equilibrium of four forces including both horizontal and vertical advections are obtained in this paper using small parameter method. Utilizing this simple PBL model, we also compute the wind spirals of a certain circular vortex over level ground and over a west-east ranged mountain, respectively. The results show that when there exsits large-scale orographic forcing,vertical advection may exert considerable influence on the wind distribution of PBL, the angle between geostrophic flow and surface wind, and the height of the top of PBL.
文摘C523 vertical lathe control circuit uses a relay control method,which has some disadvantages including large size,complex wiring,high failure rate,and maintenance difficulties.To solve these problems,a C523 vertical lathe control circuit based on PLC is designed.The electronic requirements of the control circuits,basis of PLC selection,the hardware connection and software design are described.It has been found that the PLC control circuit is simple,reliable and can highly improve the production efficiency.
