The research progress of an E//B neutral particle analyzer

An E//B neutral particle analyzer(NPA)has been designed and is under development at Sichuan University and Southwestern Institute of Physics.The main purpose of the E//B NPA is to measure the distribution function of fast ions in the HL-2A/3 tokamak.The E//B NPA contains three main units,i.e.the stripping unit,the analyzing unit and the detection unit.A gas stripping chamber was adopted as the stripping unit.The results of the simulations and beam tests for the stripping chamber are presented.Parallel electric and magnetic fields provided by a NdFeB permanent magnet and two parallel electric plates were designed and constructed for the analyzing unit.The calibration of the magnetic and electric fields was performed using a 50 kV electron cyclotron resonance ion source(ECRIS)platform.The detection unit consists of 32lutetium-yttrium oxyorthosilicate(LYSO)detector modules arranged in two rows.The response functions ofα,hydrogen ions(H^(+),H_(2)^(+)and H_(3)^(+))andγfor a detector module were measured with^(241)Am,^(137)Cs and^(152)Eu sources together with the 50 kV ECRIS platform.The overall results indicate that the designed E//B NPA device is capable of measuring the intensity of neutral hydrogen and deuteron atoms with energy higher than 20 keV.

Optimizing laser coupling,matter heating,and particle acceleration from solids using multiplexed ultraintense lasers

Realizing the full potential of ultrahigh-intensity lasers for particle and radiation generation will require multi-beam arrangements due to technology limitations.Here,we investigate how to optimize their coupling with solid targets.Experimentally,we show that overlapping two intense lasers in a mirror-like configuration onto a solid with a large preplasma can greatly improve the generation of hot electrons at the target front and ion acceleration at the target backside.The underlying mechanisms are analyzed through multidimensional particle-in-cell simulations,revealing that the self-induced magnetic fields driven by the two laser beams at the target front are susceptible to reconnection,which is one possible mechanism to boost electron energization.In addition,the resistive magnetic field generated during the transport of the hot electrons in the target bulk tends to improve their collimation.Our simulations also indicate that such effects can be further enhanced by overlapping more than two laser beams.

Proton pitch angle distributions in the Martian induced magnetosphere: A survey of Tianwen-1 Mars Ion and Neutral Particle Analyzer observations

The pitch angle distributions of ions and electrons can be affected by various processes;thus,they can serve as an important indicator of the physical mechanisms driving the dynamics of space plasmas.From observations from the Mars Ion and Neutral Particle Analyzer onboard the Tianwen-1 orbiter,we calculated the pitch angle distributions of protons in the Martian induced magnetosphere by using information from the magnetohydrodynamically simulated magnetic field,and we statistically analyzed the spatial occurrence pattern of different types of pitch angle distributions.Even though no symmetrical features were seen in the dataset,we found the dominance of the field-aligned distribution type over the energy range from 188 to 6232 eV.Maps of the occurrence rate showed the preferential presence of a trapped-like distribution at the lower altitudes of the surveyed nightside region.Although our results are more or less restricted by the adopted magnetic field,they indicate the complexity of the near-Mars proton pitch angle distributions and infer the possibility of wave–particle interactions in the Martian induced magnetosphere.

Influence Factors on Particle Growth for On-line Aerosol Matrix-assisted Laser Desorption/Ionization Time-of-flight Mass Spectrometry

An evaporation/condensation flow cell was developed and interfaced with the matrix-assisted laser desorption/ionization （MALDI） time-of-flight mass spectrometer for on-line bioaerosol detection and characterization, which allows matrix addition by condensation onto the laboratory-generated bioaerosol particles. The final coated particle exiting from the con- denser is then introduced into the aerodynamic particle sizer spectrometer or home-built aerosol laser time-of-flight mass spectrometer, and its aerodynamic size directly effects on the matrix-to-analyte molar ratio, which is very important for MALDI technique. In order to observe the protonated analyte molecular ion, and then determine the classification of bi- ological aerosols, the matrix-to-analyte molar ratio must be appropriate. Four experimental parameters, including the temperature of the heated reservoir, the initial particle size, its number concentration, and the matrix material, were tested experimentally to analyze their influences on the final particle size. This technique represents an on-line system of detection that has the potential to provide rapid and reliable identification of airborne biological aerosols.

Laser cladding in-situ carbide particle reinforced Fe-based composite coatings with rare earth oxide addition

Particulate reinforced metal matrix composite(PR-MMC) has excellent properties such as good wear resistance,corrosion resistance and high temperature properties.Laser cladding is usually used to form PR-MMC on metal surface with various volume fractions of ceramic particles.Recent literatures showed that laser melting of powder mixture containing carbon and carbide-forming elements,was favorable for the formation of in-situ synthesized carbide particles.In this paper,rare earth oxide(RE2O3) was added into t...

Rotational motions of optically trapped microscopic particles by a vortex femtosecond laser

The rotational motions of the optically trapped microscopic particles by the vortex femtosecond laser beam are investigated in this paper.Black particles can be trapped and rotated by a vortex femtosecond laser beam very effectively because the vortex beam carries orbital angular momentum due to the helical wave-front structure in assoication with the central phase singularity.Trapped black particles rotate in the vortex beam due to the absorption of the angular momentum transferred from the vortex beam.The rotating directions of the trapped particles can be modulated by reversing the topological charge of the optical vortex in the vortex femtosecond beam.And the rotating speeds of the trapped microscopic particles greatly depend on the topological charges of the vortex tweezer and the used pulse energies.

Effects of TiC addition on properties of laser particle deposited WC-Co-Cr and WC-Ni coatings

The mechanisms by which titanium carbide （TiC） improves the properties of tungsten carbide （WC） coatings deposited on duplex stainless steels using laser particle injection technique were investigated. The relationships between laser process parameters and the synthesized composite were studied. The morphologies and microstructures of the feedstock powders and composite coatings were characterized using scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDX） techniques. Surface hardness of the composite layers was determined using the Vickers microhardness tester while its corrosion behaviour in 3.5%NaCl solution was investigated by potentiodynamic polarization curve measurement method. As a result of the laser treatment, microstructures characterized by hard ceramic particles with strong bonding to substrate were formed on the surface layer of the steels. The addition of TiC to WC resulted in microstructures free from cracks, pores and intermetallics which could be detrimental to the properties of the composites. High microhardness was observed and most of the coatings shifted the corrosion potential to more noble values with the pseudo-passive curve.

Optimization of Laser Ablation Technology for PDPhSM Matrix Nanocomposite Thin Film by Artificial Neural Networks-particle Swarm Algorithm

A new thermal ring-opening polymerization technique for 1, 1, 3, 3-tetra-ph enyl-1, 3-disilacyclobutane （TPDC） based on the use of metal nanoparticles produced by pulsed laser ablation was investigated. This method facilitates the synthesis of polydiphenysilylenemethyle （PDPhSM） thin film, which is difficult to make by conventional methods because of its insolubility and high melting point. TPDC was first evaporated on silicon substrates and then exposed to metal nanoparticles deposition by pulsed laser ablation prior to heat treatment.The TPDC films with metal nanoparticles were heated in an electric furnace in air atmosphere to induce ring-opening polymerization of TPDC. The film thicknesses before and after polymerization were measured by a stylus profilometer. Since the polymerization process competes with re-evaporation of TPDC during the heating, the thickness ratio of the polymer to the monomer was defined as the polymerization efficiency, which depends greatly on the technology conditions. Therefore, a well trained radial base function neural network model was constructed to approach the complex nonlinear relationship. Moreover, a particle swarm algorithm was firstly introduced to search for an optimum technology directly from RBF neural network model. This ensures that the fabrication of thin film with appropriate properties using pulsed laser ablation requires no in-depth understanding of the entire behavior of the technology conditions.

A simulation study of a windowless gas-stripping room in an E//B neutral particle analyzer

The neutral particle analyzer(NPA)is one of the crucial diagnostic devices in a Tokamak facility.The stripping unit is one of the main parts of the NPA.A windowless gas-stripping room with two differential pipes has been constructed in a parallel electric and magnetic fields(E//B)NPA.The pressure distributions in the stripping chamber are simulated by ANSYS Fluent together with MolFlow+.Based on the pressure distributions obtained from the simulation,the stripping efficiency of the E//B NPA is studied using GEANT4.Hadron reaction physics is modified to track the charge state of each particle in a cross-section-based method in GEANT4.The transmission rates(R)and stripping efficiencies f_(+1)are examined for particle energies ranging from 20 to 200 keV with the input pressure(P_(0)),ranging from 20 to 400 Pa.According to the combined global efficiency,R×f_(+1),P_(0)=240 Pa is obtained as the optimum pressure for the maximum global efficiency in the incident energy range investigated.

Investigation of Y_2O_3 Particle Doped on Superalloy by Laser Irradiation

Possibility to dope Y_2O_3 particles into the sur- face of superalloy sample by means of laser irradiation and the relationship between homogeneity and laser irradiation parameters have been investigated.The results show that homoge- neous distribution of Y_2O_3 particles in melt-doped region can be obtained on a macro scale and the content of Y_2O_3 in the region can reach 2 wt-% when precoating powder quantity is 0.05g/cm^2, laser power density is selected as 1.76× 10~4W/cm^2 and scanning speed 0.36m/min.

Cavitation-erosion mechanism of laser cladded SiC particle reinforced metal matrix composite

With 2 kW continuous wave Nd-YAG laser, SiC ceramic powder was laser-cladded on the AA6061 aluminium alloy surface. Within the range of process parameters investigated, the parameters were optimized to produce the SiC_p reinforced metal matrix composites(MMC) modified layer on AA6061 alloy surface. After being treated, the modified layer is crack-free, porosity-free, and has good metallurgical bond with the substrate. The microstructure and chemical composition of the modified layer were analyzed by such detection devices as scanning electronic microscope(SEM-EDX) and X-ray diffractometer(XRD). The performance of electrochemical corrosion and cavitation erosion and their mechanism were estimated by the microhardness tester, potentiostat and (ultrasonic-)(induced) cavitation device.

Successive particle acceleration by use of two tightly focused ultra-short intense laser pulses

We suggest a scheme of electron acceleration by use of two tightly focused ultra-short intense laser pulses at a IOOTW level. Electroas obtain a preliminary acceleration with a small angular spread by the longitudinal ponderomotive force of the first pulse. They are then injected and further accelerated to hundreds of MeV by the second laser pulse.

INFLUENCE OF DISPERSIVE Y_2O_3 PARTICLES ALLOYING BY LASER IRRADIATION ON OXIDATION BEHAVIOUR OF AN SUPERALLOY

The homogeneous dispersive Y2O3 particles were melt-doped on the surface of a superalloy by laser alloying and the effect of Y2O3 on the oxidation resistance of the alloy were investigated. The results showed that compact α-Al2O3 oxide scales formed continuously on the alloy surface and the internal oxidation was eliminated and oxidation rate decreased. Therefore, the oxidation resistanee of the alloy was improved.

Laboratory Application of Laser Grain-Size Analyzer in Determining Suspended Sediment Concentration

Suspended sediment concentration(SSC) is an important parameter in marine sedimentology. With the development of technology, many acoustic and optical devices, such as the Laser In-Situ Scattering and Transmissometry, have been designed to measure in situ SSC and grain size distribution. But due to fund or other restrictions, many experiments were only conducted in laboratory, using an indoor laser grain-size analyzer and gravimetric method to measure grain size distribution and concentration, respectively. In this study the laboratory experiment is simplified by omitting the tiring step of gravimetric method. The connections between SSC and other parameters(obscuration, D50 and sorting index) were investigated based on 124 surface sediment samples collected from different offshore areas. A new method is developed for determining SSC in laboratory using a laser grain-size analyzer.

Carbon-coated magnetic particles increase tissue temperatures after laser irradiation

Purpose:This work focused on the investigation the hyperthermia performance of the carboncoated magnetic particles(CCMPs)in laser-induced hyperthermia.Materials and methods:We prepared CCMPs using the organic carbonization method,and then characterized them with transmission electron microscopy(TEM),ultraviolet-visible(UV-Vis)spectrophotometry,vibrating sample magnetometer(VSM)and X-ray di®raction(XRD).In order to evaluate their performance in hyperthermia,the CCMPs were tested in laser-induced thermal therapy(LITT)experiments,in which we employed a fully distributedfiber Bragg grating(FBG)sensor to profile the tissue's dynamic temperature change under laser irradiation in real time.Results:The sizes of prepared CCMPs were about several micrometers,and the LITT results show that the tissue injected with the CCMPs absorbed more laser energy,and its temperature increased faster than the contrast tissue without CCMPs.Conclusions:The CCMPs may be of great help in hyperthermia applications.

On the Hyper Thermal Therapy of Tumor Tissues by Direct Laser Heating and Gold Nano Particles

Hyper thermal therapy using lasers is emerging as a new promising route for the cancer treatment. The tumor can be directly heated by the radiation or indirectly using gold nano particles based on plasmon resonance phenolmenon. These two possibilities are explored here by solving the space and time dependent bio-heat equation under different conditions. The knowledge of temperature profiles in the tumor region helps to bypass the painful placement of sensors for monitoring tumor’s heating by the laser. Important properties which could be useful for developing an efficient tumor therapy are introduced for the first time. It is found that the effects of metabolism consist essentially in a redefinition of the blood temperature which increases proportional to the heat of metabolism. Blood perfusion in a given tissue leads to a new characteristic length of order one or two centimeters and a blood convection parameter typically of order 30 W·m-1·K-1. Effects of these parameters are scrutinized within the resolution of the bio-heat equation under a variety of conditions. In general, space modulations of the temperature throughout biological tissues are weak but front kinetics are quite fast. Specific examples show the way to monitor the temperature rise taking into account the tumor’s nature and size.

Conditions for laser-induced plasma to effectively remove nano-particles on silicon surfaces

Particles can be removed from a silicon surface by means of irradiation and a laser plasma shock wave.The particles and silicon are heated by the irradiation and they will expand differently due to their different expansion coefficients,making the particles easier to be removed.Laser plasma can ionize and even vaporize particles more significantly than an incident laser and,therefore,it can remove the particles more efficiently.The laser plasma shock wave plays a dominant role in removing particles,which is attributed to its strong burst force.The pressure of the laser plasma shock wave is determined by the laser pulse energy and the gap between the focus of laser and substrate surface.In order to obtain the working conditions for particle removal,the removal mechanism,as well as the temporal and spatial characteristics of velocity,propagation distance and pressure of shock wave have been researched.On the basis of our results,the conditions for nano-particle removal are achieved.

3D particle tracking velocimetry for the determination of temporally resolved particle trajectories within laser powder bed fusion of metals

Within this work,we present a system for the measurement of the three-dimensional(3D)trajectories of spatters and entrained particles during laser powder bed fusion(L-PBF)of metals.It is comprised of two ultrahigh-speed cameras and a reconstruction task specific processing reconstruction algorithm.The system enables an automated determination of 3D measures from the trajectories of a large number of tracked particles.Ambiguity evolving from an underdetermined geometrical situation induced by a two-camera setup is resolved within the tracking using a priori knowledge of L-PBF of metals.All processing steps were optimized to run on a graphics processing unit to allow the processing of large amounts of data within an appropriate time frame.The overall approach was validated by a comparison of the measurement results to synthetic images with a known 3D ground truth.

Development of the Mars energetic particles Completed by IMP analyzer

The Mars energetic particles analyzer(Mars-EPA for short)is one of the payloads of Mars probe,which de-veloped by IMP and Lanzhou Institute of Physics,will be lunched this year in China.

Dynamic evolution of low-viscosity fuel particle distribution driven by constant flow

The effects of mass concentration and injection pressure on the atomization characteristics of low-viscosity fuel spray are studied in a constant-volume chamber.Microscopic spray parameters are measured by laser diffraction at different axial and radial positions downstream of the nozzle.The results show that the atomization effect is inhibited linearly with the increase of mass concentration.The increase of injection pressure promotes the droplet breakup.However,the trend gradually weakens and becomes more noticeable at high concentrations.Comparing with the concentration,the influence of the injection pressure on the atomization characteristics is dominant.Although low concentration and high injection pressure can promote the droplet breakup,they also increase the probability of droplet collision,resulting in droplet aggregation.This is more evident in low-viscosity fuels.The droplet size increases in the axial direction owing to the aggregation.However,the diameter decreases in the radial direction owing to the outward deflection of small droplets caused by air turbulence and entrainment.In addition,the high-velocity airflow significantly promotes the droplet breakup near the nozzle and spray axis regions and inhibits the aggregation effect.However,the lower-viscosity fuels keep smaller droplet sizes and better atomization in the whole spraying process,which is easier to realize than the higher-viscosity fuels.Overall,low concentration,high injection pressure,and low viscosity of fuel have beneficial effects on the droplet breakup.This is very important for improving the atomization effect of fuel.