Effects of Metal Absorber Thermal Conductivity on Clear Plastic Laser Transmission Welding

In our previous study, metals have been used as absorbers in the clear plastic laser transmission welding. The effects of metal thermal conductivity on the welding quality are investigated in the present work. Four metals with distinctly different thermal conductivities, i.e., titanium, nickel, molybdenum, and copper, are selected as light absorbers. The lap welding is conducted with an 808 nm diode laser and simulation experiments are also conducted. Nickel electroplating test is carried out to minimize the side-effects from different light absorptivities of different metals. The results show that the welding with an absorber of higher thermal conductivity can accommodate higher laser input power before smoking, which produces a wider and stronger welding seam.The positive role of the higher thermal conductivity can be attributed to the fact that a desirable thermal field distribution for the molecular diffusion and entanglement is produced from the case with a high thermal conductivity.

Effects of CO_2 laser on chromosomal aberration in the root tip cells of rice

Seeds of japonica rice cv.Zhenuo 2 with twodifferent physiological states(dry seeds withwater content 13% and wet seeds soaked in thewater for 36 h)were irradiated by COlaser infour different power-densities and durations re-spectively.The treatment irradiated with 200GY ofCo γ-rays was considered as control.The flesh root tips were cut and fixed inCarnoy’s fluid for cytological examination.

Study on mutagenic effects of rice seeds irradiated by CO_2 laser

Seeds of japonica rice (cv. Zhenuo 2) at twodifferent physiological states (dry seeds withwater content 13% and wet seeds soaked inthe water for 36 h) were irradiated by COlaser in four different power-densities. Theseeds irradiated by 200GY ofCo γ rays andno radiated seeds were used as the controls.Results showed that the biological effects

LASER LIFT-OFF OF GaN THIN FILMS FROM SAPPHIRE SUBSTRATES

Gallium Nitride film was successfully separated from sapphire substrate by laser radiation. The absorption of the 248 nm radiation by the GaN at the interface results in rapid thermal decomposition of interfacial layer, yielding metallic Ga and N2 gas. The substrate can be easily removed by heating above the Ga melting point (29°C). X-ray diffraction, atomic force microscopy and photoluminescence of GaN before and after lift-off process have been performed, which demonstrated that the separation and transfer process do not alter the structural quality of the GaN films. And further discussions on the threshold energy and crack-free strategies of laser lift-off process have also been presented.

Effect of low-level laser therapy on tooth-related pain and somatosensory function evoked by orthodontic treatment

Low-level laser therapy(LLLT) may have an effect on the pain associated with orthodontic treatment. The aim of this study was to evaluate the effect of LLLT on pain and somatosensory sensitization induced by orthodontic treatment. Forty individuals(12–33 years old; mean ± standard deviations: 20.8 ± 5.9 years) scheduled to receive orthodontic treatment were randomly divided into a laser group(LG) or a placebo group(PG)(1:1). The LG received LLLT(810-nm gallium-aluminium-arsenic diode laser in continuous mode with the power set at 400 mW, 2 J·cm–2) at 0 h, 2 h, 24 h, 4 d, and 7 d after treatment, and the PG received inactive treatment at the same time points. In both groups, the non-treated side served as a control. A numerical rating scale(NRS) of pain, pressure pain thresholds(PPTs), cold detection thresholds(CDTs), warmth detection thresholds(WDTs), cold pain thresholds(CPTs), and heat pain thresholds(HPTs) were tested on both sides at the gingiva and canine tooth and on the hand. The data were analysed by a repeated measures analysis of variance(ANOVA). The NRS pain scores were significantly lower in the LG group(P = 0.01). The CDTs,CPTs, WDTs, HPTs, and PPTs at the gingiva and the PPTs at the canine tooth were significantly less sensitive on the treatment side of the LG compared with that of the PG(P < 0.033). The parameters tested also showed significantly less sensitivity on the nontreatment side of the LG compared to that of the PG(P < 0.043). There were no differences between the groups for any quantitative sensory testing(QST) measures of the hand. The application of LLLT appears to reduce the pain and sensitivity of the tooth and gingiva associated with orthodontic treatment and may have contralateral effects within the trigeminal system but no generalized QST effects. Thus, the present study indicated a significant analgesia effect of LLLT application during orthodontic treatment.Further clinical applications are suggested.

Slip on the surface of silicon wafers under laser irradiation:Scale effect

The slip mechanism on the surface of silicon wafers under laser irradiation was studied by numerical simulations and experiments. Firstly, the slip was explained by an analysis of the generalized stacking fault energy and the associated restoring forces. Activation of unexpected {110} slip planes was predicted to be a surface phenomenon. Experimentally,{110} slip planes were activated by changing doping concentrations of wafers and laser parameters respectively. Slip planes were {110} when slipping started within several atomic layers under the surface and turned into {111} with deeper slip.The scale effect was shown to be an intrinsic property of silicon.

Nonadiabatic Effect on the Rescattering Trajectories of Electrons in Strong Laser Field Ionization Process

The important features of the rescattering trajectories in strong field ionization process such as the cutoff of the return energy at 3.17Up and that of the final energy at 10Up are obtained, based on the adiabatic approximation in which the initial momentum of the electron is assumed to be zero. We theoretically study the nonadiabatic effect by assuming a nonzero initial momentum on the rescattering trajectories based on the semiclassical simpleman model. We show that the nonzero initial momentum will modify both the maximal return energy at collision and the final energy after backward scattering, but in different ways for odd and even number of return trajectories. The energies are increased for even number of returns but are decreased for odd number of returns when the nonzero （positive or negative） initial momentum is applied.

LASER HEAT TREATING RESEARCH OF THREE KINDS OF HIGH SPEED STEEL

After laser quenching and tempering of three kinds of annealed tool high-speed steel(W18Cr-4V, W9Mo3Cr4V1, W6Mo5Cr4V2) test samples, the microhardness measurer was used to test the samples and some problems, such as the hardness and depth of hardening-quenching layer were analyzed. Furthermore, after laser quenching and tempering of the quenched and three-time tempered high-speed steel (W18Cr4V) and its hardness analyzing, different results of laser-quenching samples were obtained under different initial heat-treating.

STUDIES ON THE DYNAMIC BUCKLING OF CIRCULAR PLATE IRRADIATED BY LASER BEAM

The dynamic buckling of thin copper plate induced by laser beam, was analyzed with the numerical integration and disturbance methods of controlling equation. The buckling and post-buckling of thin plate were shown, with the consideration of the temperature distribution, inertia effect and initial deflection. At last, the buckling criterion about the circular plate was obtained and used to investigate the relation between the critical laser intensity and the ratio of thickness and diameter of the plate. The results fit the experimental observation and FEM simulation very well, and benefit the understanding of failure phenomenon of structures irradiated by laser beam.

Effect of Laser Annealing on Permeability Spectra in Co-based Amorphous Ribbon

We investigated the variation of permeability spectra and relaxation frequency in Co-based amorphous ribbon annealed by pulsed Nd:YAG laser at various annealing energy Ea. The complex permeability spectra varies sensitively with the annealing energy, where the spectra could be decomposed into two contributions from domain wall motion,μdw(f) and rotational magnetization μrot(f) by analyzing the measured spectra as a function of driving ac field amplitude. The magnitude of μdw(f) and μrot(f) in dc limit shows maximum at Ea = 176 mJ. The maximum relaxation frequency for rotational magnetization, determined by μ'(f) curve, is about 700 kHz at Ea=62 mJ but that for wall motion is about 26 kHz at 230 mJ. These variations reflect the increase of magnetic softness and microstructural change by the annealing.

Control of gain and thermal carrier loss profiles for mode optimization in 980-nm broad-area vertical-cavity surface-emitting lasers

Optical gain and thermal carrier loss distributions regarding current diffusion and various electric contact areas are investigated to improve the near-field modes from the ring-shape to a Gaussian-like configuration for extra-broad-area and oxide-confined vertical-cavity surface-emitting lasers. In this work an equivalent circuit network model is used. The resistance of the continuously-graded distributed Bragg reflectors （DBRs）, the current diffusion and the temperature effect due to different electric-contact areas are calculated and analyzed at first, as these parameters affect one another and are the key factors in determining the gain and thermal carrier loss. Finally, the gain and thermal carrier loss distributions are calculated and discussed.

Integration system research and development for three-dimensional laser scanning information visualization in goaf

An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.

Effect of Droop Phenomenon in InGaN/GaN Blue Laser Diodes on Threshold Current

Electroluminescence （EL） and temperature-dependent photolumineseenee measurements are performed to study the internal quantum efficiency droop phenomenon of blue laser diodes （LDs） before lasing. Based on the ABC mode, the EL result demonstrates that non-radiative recombination rates of LDs with threshold current densities of 4 and 6kA/cm2 are similar, while LD with threshold current density of 4kA/cm2 exhibits a smaller auger- like recombination rate compared with the one of 6kA/cm2. The internal quantum efficiency droop is more serious for LD with higher threshold current density. temperature-dependent photoluminescence is consistent The internal quantum efficiency value estimated from with EL measurements.

Effects of space duty cycle on the characteristics of fiber laser coherent beam combination

The characteristics of fiber laser coherent beam combination are investigated by using a 2×2 fiber laser array with a self-Fourier cavity.The experimental results show that with a certain output width the power ratio of the center spot is increased with the increase of space duty cycle,meanwhile the number of secondary spots is decreased correspondingly.The results are in agreement with theoretic analysis.

Effects of the Facet Reflectivity of a Laser Diode on Fiber Bragg Grating Semiconductor Lasers

Effects of facet reflectivity of a laser diode on the performance of fiber Bragg grating semiconductor lasers are studied experimentally. Facet reflectivity of less than 10-4 is necessary to obtain stable oscillation wavelength.

High-speed and high-performance polarization-based quantum key distribution system without side channel effects caused by multiple lasers

Side channel effects such as temporal disparity and intensity fluctuation of the photon pulses caused by random bit generation with multiple laser diodes in high-speed polarization-based BB84 quantum key distribution(QKD) systems can be eliminated by increasing the DC bias current condition. However, background photons caused by the spontaneous emission process under high DC bias current degrade the performance of QKD systems. In this study, we investigated the effects of spontaneously emitted photons on the system performance in a high-speed QKD system at a clock rate of 400 MHz. Also, we show further improvements in the system performance without side channel effects by utilizing the temporal filtering technique with real-time fieldprogrammable gate array signal processing.

Noise Effects in the Mode-Locked External Cavity Lasers

Effect of high level of spontaneous and carrier noise on mode-locked hybrid soliton pulse source and relative intensity noise is described. Transform limited pulses are not generated over a wide frequency range because of these noises.

Deciphering the Origins of P1-Induced Power Losses in Cu(In_(x),Ga_(1–x))Se2(CIGS)Modules Through Hyperspectral Luminescence

In this report,we show that hyperspectral high-resolution photoluminescence mapping is a powerful tool for the selection and optimiz1ation of the laser ablation processes used for the patterning interconnections of subcells on Cu(Inx,Ga1-x)Se2(CIGS)modules.In this way,we show that in-depth monitoring of material degradation in the vicinity of the ablation region and the identification of the underlying mechanisms can be accomplished.Specifically,by analyzing the standard P1 patterning line ablated before the CIGS deposition,we reveal an anomalous emission-quenching effect that follows the edge of the molybdenum groove underneath.We further rationalize the origins of this effect by comparing the topography of the P1 edge through a scanning electron microscope(SEM)cross-section,where a reduction of the photoemission cannot be explained by a thickness variation.We also investigate the laser-induced damage on P1 patterning lines performed after the deposition of CIGS.We then document,for the first time,the existence of a short-range damaged area,which is independent of the application of an optical aperture on the laser path.Our findings pave the way for a better understanding of P1-induced power losses and introduce new insights into the improvement of current strategies for industry-relevant module interconnection schemes.

THERAPEUTIC EFFECTS OF PHOTOSENSITIZERS IN COMBINATION WITH LASER AND ACNU ON AN IN VIVO OR IN VITROMODEL OF CEREBRAL GLIOMA

This study investigated the independent and combined effects of photodynamic therapy (PDT), laser photodynamic hyperthermia (LPDH) and 1-(4-amino-2-methyl-5-pyrimidinyl) methy1-3-(2-chloroethyl) -3-nitrosourea hydrochloride (ACNU) in a rat 9L induced gliosarcoma model. The mortality rate (MR60), mean survival time (MST60), and increasing life span (ILS60) within 60 days were determined to evaluate the therapeutic effect in vivo. The MR60 and MST60 of the gliosarcoma tumor control were 100% and 16.2 days. The ILS60s of PDT and ACNU were 72.84% and 49.81%, respectively, but MR60 of both were 86.72%. All combined treatments produced significantly prolonged survival (P<0.01). The combined effects of LPDH and ACNU, MR60, MST60, and ILS60 were 60%, 43 days, and 165.4%, respectively. The ILS60 of PDT+ACNU (96.48%) and PDT+LPDH (98.58%) also indicated a synergistic or additive effect. The survival fraction and synthetic rate of DNA, RNA, and protein of glioma 9L tumor cells in vitro after single treatment of PDT or combined with antitumor drugs and laser showed that the cytotoxicity of PDT to 9L tumor cell was obvious by using Rh123, HPD, and Pf-Ⅱ as photosensitizers. Combined treatments of PDT, antitumor drugs, and laser suppressed the synthesis of DNA, RNA, and protein more significantly than single treatment with PDT.

Solutions of the modification heating conduction equations of a kind of laser thermal effect

This paper has solved the Chester modified heat conduction equation of the different relaxation time r value under different temperature conditions, different boundary conditions and the different initial conditions by different means of methods. These solutions can help to obtain temperature field of laser thermal effects.