This paper investigates the monolithic edge-cladding process for the elliptical disk of N31-type Nd-doped phosphate laser glass,which will be utilized under liquid cooling conditions for high-power laser systems.The t...This paper investigates the monolithic edge-cladding process for the elliptical disk of N31-type Nd-doped phosphate laser glass,which will be utilized under liquid cooling conditions for high-power laser systems.The thermal stress,interface bubbles and residual refiectivity,which are due to high-temperature casting and bonding during the monolithic edge-cladding process,are simulated and determined.The applied mould is optimized to a rectangular cavity mould,and the casting temperature is optimized to 1000℃.The resulting lower bubble density makes the mean residual refiectivity as low as 6.75×10^(-5),which is enough to suppress the amplified spontaneous emission generated in the Nd-glass disk,and the resulting maximum optical retardation is converged to 10.2–13.3 nm/cm,which is a favourable base for fine annealing to achieve the stress specification of less than or equal to 5 nm/cm.After fine annealing at the optimized 520℃,the maximum optical retardation is as low as 4.8 nm/cm,and the minimum transmitted wavefront peak-to-valley value is 0.222 wavelength(632.8 nm).An N31 elliptical disk with the size of 194 mm×102 mm×40 mm can be successfully cladded by the optimized monolithic edge-cladding process,whose edge-cladded disk with the size of 200 mm×108 mm×40 mm can achieve laser gain one-third higher than that of an N21-type disk of the same size.展开更多
基金the Nd-glass project from National Major Science and Technology Project of China(No.G-GFZX0205010202.1)the Shanghai International Science&Technology Cooperation Program(No.18590712900)。
文摘This paper investigates the monolithic edge-cladding process for the elliptical disk of N31-type Nd-doped phosphate laser glass,which will be utilized under liquid cooling conditions for high-power laser systems.The thermal stress,interface bubbles and residual refiectivity,which are due to high-temperature casting and bonding during the monolithic edge-cladding process,are simulated and determined.The applied mould is optimized to a rectangular cavity mould,and the casting temperature is optimized to 1000℃.The resulting lower bubble density makes the mean residual refiectivity as low as 6.75×10^(-5),which is enough to suppress the amplified spontaneous emission generated in the Nd-glass disk,and the resulting maximum optical retardation is converged to 10.2–13.3 nm/cm,which is a favourable base for fine annealing to achieve the stress specification of less than or equal to 5 nm/cm.After fine annealing at the optimized 520℃,the maximum optical retardation is as low as 4.8 nm/cm,and the minimum transmitted wavefront peak-to-valley value is 0.222 wavelength(632.8 nm).An N31 elliptical disk with the size of 194 mm×102 mm×40 mm can be successfully cladded by the optimized monolithic edge-cladding process,whose edge-cladded disk with the size of 200 mm×108 mm×40 mm can achieve laser gain one-third higher than that of an N21-type disk of the same size.
