Laser Doppler Vibrometer Without Directional Ambiguity Using Rectangular Phase Grating

The two-phase detection method for directional discrimination in laser Doppler measurements is discussed.The diffraction efficiency of a sin- gle period rectangular phase grating is analysed and a kind of back-scattered laser Doppler vibrometer without directional ambiguity using the single peri- od rectangular phase grating as the beam-combiner described.The principles of this kind of vibrometer are explained in detail,and some experimental re- sults are given.In this kind of vibrometer,the rectangular phase grating, without the zero diffracted order and even orders,is used to eliminate use- less stray light and to combine the useful signal light.Differential electronics is employed to reject signal noise.Therefore,the signal-to-noise ratio of Doppler signals and the measurement accuracy of the instrument are im- proved and the range of application is expanded.

Numerical investigation of multi-beam laser heterodyne measurement with ultra-precision for linear expansion coefficient of metal based on oscillating mirror modulation

This paper proposes a novel method of multi-beam laser heterodyne measurement for metal linear expansion coefficient. Based on the Doppler effect and heterodyne technology, the information is loaded of length variation to the frequency difference of the multi-beam laser heterodyne signal by the frequency modulation of the oscillating mirror, this method can obtain many values of length variation caused by temperature variation after the multi-beam laser heterodyne signal demodulation simultaneously. Processing these values by weighted-average, it can obtain length variation accurately, and eventually obtain the value of linear expansion coefficient of metal by the calculation. This novel method is used to simulate measurement for linear expansion coefficient of metal rod under different temperatures by MATLAB, the obtained result shows that the relative measurement error of this method is just 0.4%.

Numerical Controlled Two Optical Paths CO_2 Laser Die-Cutting Technology

A CO2 laser die-cutting system, which does not need die board any more, is a new technique for manufac-turing packing box. Two optical paths, the galvanometer scanning system and the flying optical system, are used to satisfy different processing needs. The scanning system is composed of galvanometer scanning mirrors and F-θ lens. And the flying optical system is driven by two servo motors. This paper presents the software and hardware design of the laser die-cutting system, the difference between the two optical paths, as well as the relationship among the cutting speed, thickness of wrapping paper and laser power. The cutting speed and thickness of wrapping paper are linearly increased by the incremental laser power, while the cutting speed is hyperbolically decreased by the incremental thickness of wrapping paper when the laser power is constant. The amount of incision is reduced by 20% and the processing time by 40% when tested by a low power RF CO2 laser die-cutting system using the optimized program. This tech- nique is also used for the reference of other rapid laser processing systems.

Characteristics of selective oxidation during the fabrication of vertical cavity surface emitting laser

Taking into account oxidation temperature, N2 carrier gas flow, and the geometry of the mesa structures this paper investigates the characteristics of selective oxidation during the fabrication of the vertical cavity surface emitting laser （VCSEL） in detail. Results show that the selective oxidation follows a law which differs from any reported in the literature. Below 435℃ selective oxidation of Al0.98Ga0.02As follows a linear growth law for the two mesa structures employed in VCSEL. Above 435℃ approximately increasing parabolic growth is found, which is influenced by the geometry of the mesa structures. Theoretical analysis on the difference between the two structures for the initial oxidation has been performed, which demonstrates that the geometry of the mesa structures does influence on the growth rate of oxide at higher temperatures.

Effect of Annealing Temperatures on the Structural and Electrical Properties of Laser Induced Plasma for TiO2x-1Bix Thin Films

In this study, Bismuth doped Titanium dioxide thin films were deposited on glass substrates by a pulse laser deposition using laser. The effect of annealing temperature on the structural and electrical properties was investigated. X-ray diffraction pattern for pure and doped titanium dioxide films with different doping different ratio with Bi show that these films have amorphous structure oanvert to polycrystalline structure with annealing and doping and have a good identically with standard peaks for Anatase and Rutile phases. The orientation was at specific direction for Rutile. The crystalline of films increases by the increase of doping ratio. The crystalline increased with annealing temperature. Annealed films at different annealing temperatures have been studied. The results show that these films have two activation energies and by increasing the doping ratio, the activation energies and the conductivity increase. Both the annealing and composition effects on Hall constant, density of electron carders and Hall mobility are studied. Hall Effect measurements show that all films have n- type charge conductivity and the concentration increases while the mobility decreases with doping and annealing.

Solid-Liquid Equilibria of trans-1,2-Cyclohexanediol＋Butyl Acetate＋ Water Ternary System

Using a laser observation technique,the solubilities of trans-1,2-cyclohexanediol in butyl acetate+wa- ter were measured at the temperature range from 298.15K to 323.15K by a synthetic method at atmospheric pres- sure.It is shown that the solubilities of trans-1,2-cyclohexanediol in butyl acetate+water were affected greatly by the proportion of butyl acetate and water,and presented maximum value at given temperature.The UNIFAC model was used to correlate the experimental data.The average relative deviation(ARD)between experimental and calculated values is 3.03%.

Study on Estimation Method of Rock Mass Discontinuity Shear Strength Based on Three-Dimensional Laser Scanning and Image Technique

The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of exist- ing estimation methods, a new approach based on the shadow area percentage （SAP） that can be used to quantify surface roughness is proposed in this article. Firstly, by the help of laser scanning technique, the three-dimensional model of the surface of rock discontinuity was established. Secondly, a light source was simulated, and there would be some shadows produced on the model surface. Thirdly, to obtain the value of SAP of each specimen, the shadow detection technique was introduced for use. Fourthly, compared with the result from direct shear testing and based on statistics, an empirical for- mula was found among SAP, normal stress, and shear strength. Data of Yujian （~ River were used as an example, and the following conclusions have been made. （1） In the case of equal normal stress, the peak shear stress is positively proportional to the SAP. （2） The formula for estimating was derived, and the predictions of peak-shear strength made with this equation well agreed with the experimental re- suits obtained in laboratory tests.

Influence of yttrium on laser surface alloying organization of 40Cr steel

In order to improve the performance of the metal rollers, Mo＋Y2O3 alloy powders were used to coat uniformly on the surface of 40Cr steel roller substrates for the laser surface alloying treatment by a CO2 laser, The results showed that many good consequences were ob- tained after adding the rare earth oxide Y2O3. The crystal grains of the alloy layer were significantly refined. The boundary of crystal grains was strengthened. The unifomaity and density of the microstructure were increased. The hardness and wearing resistance of the alloy layer were considerably improved. The valence electron structure analysis of the alloy layer was made by the empirical electron theory of solids and molecules （EET）. The calculated results demonstrated that Y should be mixed in the first stage and Fe should be in the eighteenth hybrid bands. The analyzed outcomes illustrated that the electron theory of the solid solution shows the strengthening effect on the alloying layer, which has enhanced bond and confirrned the experimental results.

An adaptive laser beam shaping technique based on a genetic algorithm

A new adaptive beam intensity shaping technique based on the combination of a 19-element piezo-electricity deformable mirror （DM） and a global genetic algorithm is presented. This technique can adaptively adjust the voltages of the 19 actuators on the DM to reduce the difference between the target beam shape and the actual beam shape. Numerical simulations and experimental results show that within the stroke range of the DM, this technique can be well used to create the given beam intensity profiles on the focal plane.

Resonator integrated optic gyro based on multilevel laser frequency lock-in technique

The resonator integrated optic gyros（RIOGs） based on the Sagnac effect have gained extensive attention in navigation and guidance systems due to their predominant advantages： high theoretical accuracy and simple integration. However, the problems of losing lock and low lock-in accuracy are the bottlenecks, which restrict the development of digital RIOGs. Therefore, a multilevel laser frequency lock-in technique has been proposed in this Letter to address these problems. The experimental results show that lock-in accuracy can be improved one order higher and without losing lock in a variable temperature environment. Then, a digital miniaturized RIOG prototype（18 cm × 18 cm × 20 cm） has been produced, and long-term（1 h） bias stability of 26.6 deg/h is successfully demonstrated.

Two-micrometer thulium laser resection of the prostate-tangerine technique in benign prostatic hyperplasia patients with previously negative transrectal prostate biopsy

The 2-1μm thulium laser resection of the prostate-tangerine technique （TmLRP-TT） has been introduced as a minimally invasive treatment for benign prostatic hyperplasia （BPH）. This study was undertaken to assess the clinical efficacy and safety of TmLRP-TT for the treatment of BPH patients with previously negative transrectal prostate biopsy. A prospective analysis of 51 patients with previously negative transrectal prostate biopsy who underwent surgical treatment using TmLRP-TT was performed from December 2011 to December 2013. Preoperative status, surgical details, and perioperative complications were recorded. The follow-up outcome was evaluated with subjective and objective tests at I and 6 months. TmLRP-TT was successfully completed in all patients. Mean prostate volume, operative duration, and catheterization time were 93.3 ± 37.9 ml, 69.5 ± 39.5 min, and 6.5 ± 1.3 days, respectively. The mean International Prostate Symptom Score, quality of life score, maximum urinary flow rate, and post-void residual urine volume changed notably at 6-month follow-up （22.5 ± 6.9 vs 6.1 ± 3.2, 4.8 ± 1.3 vs 1.1 ± 0.9, 7.3 ± 4.5 vs 18.9 ± 7.1 ml s^-1, and 148.7 ± 168.7 vs 28.4 ± 17.9 ml）. Two （3.9%） patients required blood transfusion perioperatively, while 3 （5.9%） patients experienced transient hematuria postoperatively, and 2 （3.9%） patients received 3 days recatheterization due to clot retention. TmLRP-TT is a safe and effective minimally invasive technique for patients with previously negative transrectal prostate biopsy during the 6-month follow-up. This promising technology may be a feasible surgical method for previously negative transrectal prostate biopsy in the future.

Accelerating ions with high-energy short laser pulses from submicrometer thick targets

Using the example of the PHELIX high-energy short pulse laser we discuss the technical preconditions to investigate ion acceleration with submicrometer thick targets. We show how the temporal contrast of this system was improved to prevent pre-ionization of such targets on the nanosecond timescale. Furthermore the influence of typical fluctuations or uncertainties of the on-target intensity on ion acceleration experiments is discussed. We report how these uncertainties were reduced by improving the assessment and control of the on-shot intensity and by optimizing the positioning of the target into the focal plane. Finally we report on experimental results showing maximum proton energies in excess of 85 MeV for ion acceleration via the target normal sheath acceleration mechanism using target thicknesses on the order of one micrometer.

MEASUREMENT AND ANALYSIS OF LASER GENERATED RAYLEIGH AND LAMB WAVES CONSIDERING ITS PULSE DURATION

In this article, laser generated Rayleigh and Lamb waves are studied by taking into account its pulse duration. The physical model and theoretical solution are presented to predict the corresponding waveforms for aluminum samples under the ablation generation regime. The waveforms of the excited Rayleigh and Lamb waves by laser with selected pulse duration were measured by laser interferometer and analyzed theoretically, and the agreement between measurement and analysis is demonstrated for the validation of the theoretical model and solution. The broadening of the Rayleigh wave and the disappearing of high order Lamb wave modes can be found with the increase of the pulse duration by the laser ultrasonic technique.

A Rapid Calibration Technique for Scanning Line-Structured Laser Sensor

A novel procedure to calibrate the scanning line-structured laser sensor is presented. A drone composed of two orthogonal planes is designed, with the result that camera parameters and light-plane equation parameters is achieved simultaneously.

Novel technique of controlled laser air-force detection for rheological properties of polymers

A novel controlled laser air-force detection(CLAFD)technique was developed to detect the rheological properties of polymers with the characteristics of non-destruction and cross-contamination free.Dynamic testing and static testing were carried out in the technique.Back propagation neural network algorithm was used to establish the air-force control model.The replicability of CLAFD system was analyzed,the viscoelastic properties of polyurethane were investigated using alternating load testing.A comparative analysis of performances was made between the CLAFD and the texture analysis(TA)on the testing of creep-recovery and stress relaxation.The results demonstrated that the CLAFD system had good replicability.The lagging phase angle was between 0°-90°in the testing of alternating load.This illustrated that the CLAFD technique could be used to detect viscoelasticity.The parameters of response speed and the precision of the CLAFD entirely surpassed the TA on the creep-recovery testing.The CLAFD technique will provide a new real-time,non-destruction and cross-contamination-free detection method for material science,especially for those materials such as artificial biological tissue and function food products.

Improvement of thickness uniformity and elements distribution homogeneity for multicomponent films prepared by coaxial scanning pulsed laser deposition technique

In conventional pulsed laser deposition （PLD） technique, plume deflection and composition distribution change with the laser incident direction and pulse energy, then causing uneven film thickness and composition distribution for a multicomponent film and eventually leading to low device quality and low rate of final products. We present a novel method based on PLD for depositing large CIGS films with uni- form thickness and stoichiometry. By oscillating a mirror placed coaxially with the incident laser beam, the laser＇s focus is scanned across the rotating target surface. This arrangement maintains a constant re- flectance and optical distance, ensuring that a consistent energy density is delivered to the target surface by each laser pulse. Scanning the laser spot across the target suppresses the formation of micro-columns, and thus the plume deflection effect that reduces film uniformity in conventional PLD technique is eliminated. This coaxial scanning PLD method is used to deposit a CIGS film, 500 nm thick, with thickness uniformity exceeding ±3% within a 5 cm diameter, and exhibiting a highly homogeneous elemental distribution.

Effective generation of optical quadruple frequency millimeter-wave based on fiber laser using injection rational harmonic mode-locked technique

A method to generate the optical quadruple frequency millimeter-wave with high power efficiency is pro- posed and demonstrated based on the combination of the injection 2nd-order rational harmonic mode- locked fiber ring laser technique and the fiber grating notch filter. In this approach, the fiber Bragg grating notch filter is inserted into the laser cavity to prevent the undesired optical carrier, so that the pump power can be converted to 2nd-order harmonic wave more efficiently. In our experiment, the power efficiency of optical quadruple frequency millimeter-wave （40 GHz） generation is ten folds of that of our previous method based only on the rational harmonic mode-locked technique.

Bis(4,4′-dimethyl-2,2′-bipyridine)ruthenium(II) Complexes Containing 2-Arylimidazo-phenanthroline: Syntheses, Characterization and Third-order Nonlinear Optical Properties

Four novel mononuclear ruthenium(II) complexes [Ru-(dmb) 2L] 2+ [dmb=4,4′-dimethyl-2,2′-bipyridine, L=imid-azo-[4,5-f]phenanthroline (IP), 2-phenylimidazo-phenanthroline (PIP), 2-(4′-hydroxyphenyl)imidazo-phenanthroline (HOP), 2-(4′-dimethylami- nophenyl)imidazo-phenanthroline (DMNP)] were synthesized and characterized by ES-MS, 1H NMR, UV-vis and electrochemistry. The nonlinear optical properties of the ruthenium(II) complexes were investigated by Z-scan techniques with 12 ns laser pulse at 540 nm, and all of them exhibit both nonlinear optical (NLO) absorption and self-defocusing effect. The corresponding effective NLO susceptibility |χ 3| of the complexes is in the range of 2.68×10 -12-4.57×10 -12 esu.