The present work focus on the thermal performance of a horizontal concentric heat exchanger, which is numerically investigated to evaluate the heat transfer enhancement process by adding fins with different configurat...The present work focus on the thermal performance of a horizontal concentric heat exchanger, which is numerically investigated to evaluate the heat transfer enhancement process by adding fins with different configurations. As a part of this investigation, the melting process is simulated from the onset of phase change to the offset involving physics of natural convection in PCM fluid pool. The investigation is carried out by ANSYS Fluent code, which is an efficient numerical analysis tool for investigating fluid flow and convective heat transfer phenomena during PCM melting process. The attention is mainly focused on the extension of contact area between the PCM body and cylindrical capsule to enhance heat transfer rates to PCM bodies during the melting process by employing longitudinal fins in the enclosed capsule. Two commercial PCMs: RT50 and C58, are introduced in a 2D cylindrical pipe with their thermo-physical properties as input for modelling. The selected modelling approach is validated against experimental result with respect to the total enthalpy changes that qualify our model to run in the proceeding calculation. It is ensured that an isothermal boundary condition (373 K) is applied to the inner pipe throughout the series of simulation cases and the corresponding Rayleigh number (Ra) ranges from 104 - 105 and Prandtl number (Pr) 0.05 - 0.07. Finally, parametric study is carried out to evaluate the effect of length, thickness and number of longitudinal fins on the thermal performance of PCM-LHTES (Latent Heat Thermal Energy Storage) system associated with the physics of natural convection process during PCM melting.展开更多
Thermal energy storage(TES)is a key technology for renewable energy utilization and the improvement of the energy efficiency of heat processes.Sectors include industrial process heat and conventional and renewable pow...Thermal energy storage(TES)is a key technology for renewable energy utilization and the improvement of the energy efficiency of heat processes.Sectors include industrial process heat and conventional and renewable power generation.TES systems correct the mismatch between supply and demand of thermal energy.In the medium to high temperature range(100~1000℃),only limited storage technology is commercially available and a strong effort is needed to develop a range of storage technologies which are efficient and economical for the very specific requirements of the different application sectors.At the DLR's Institute of Technical Thermodynamics,the complete spectrum of high temperature storage technologies,from various types of sensible over latent heat to thermochemical heat storages are being developed.Different concepts are proposed depending on the heat transfer fluid(synthetic oil,water/steam,molten salt,air)and the required temperature range.The aim is the development of cost effective,efficient and reliable thermal storage systems.Research focuses on characterization of storage materials,enhancement of internal heat transfer,design of innovative storage concepts and modelling of storage components and systems.Demonstration of the storage technology takes place from laboratory scale to field testing(5 kW^1 MW).The paper gives an overview on DLR's current developments.展开更多
Adding fins to a shell-and-tube phase change thermal storage is a simple and effective way to enhance the performance of the phase change heat storage unit,and the proper arrangement of the fins is essential to enhanc...Adding fins to a shell-and-tube phase change thermal storage is a simple and effective way to enhance the performance of the phase change heat storage unit,and the proper arrangement of the fins is essential to enhance the performance of the storage unit.To enhance the performance of the triplex-tube thermal storage unit,a novel V-shaped fin structure is presented in this paper.And the heat storage performance of the thermal storage system is studied by numerical simulation.Firstly,the performance of the triplex-tube thermal energy storage unit with different arrangements of V-shaped fins is investigated by a two-dimensional model and compared with the use of the traditional rectangular fin structure,and the optimal fin arrangement is derived.The results show that the V-shaped fins with the optimal arrangement can decrease the time for the PCM melting in the heat storage unit by 31.92%compared to the conventional rectangular fins.On this basis,the influence of fin angle and thickness on the heat storage unit was studied.Then,a three-dimensional model of the thermal storage unit was established.And the effect of the flow parameters(inlet temperature,inlet flow rate)of the heat transfer fluid(HTF)on its performance was discussed in detail.Finally,the stored energy analysis of the whole thermal storage unit is carried out.展开更多
文摘The present work focus on the thermal performance of a horizontal concentric heat exchanger, which is numerically investigated to evaluate the heat transfer enhancement process by adding fins with different configurations. As a part of this investigation, the melting process is simulated from the onset of phase change to the offset involving physics of natural convection in PCM fluid pool. The investigation is carried out by ANSYS Fluent code, which is an efficient numerical analysis tool for investigating fluid flow and convective heat transfer phenomena during PCM melting process. The attention is mainly focused on the extension of contact area between the PCM body and cylindrical capsule to enhance heat transfer rates to PCM bodies during the melting process by employing longitudinal fins in the enclosed capsule. Two commercial PCMs: RT50 and C58, are introduced in a 2D cylindrical pipe with their thermo-physical properties as input for modelling. The selected modelling approach is validated against experimental result with respect to the total enthalpy changes that qualify our model to run in the proceeding calculation. It is ensured that an isothermal boundary condition (373 K) is applied to the inner pipe throughout the series of simulation cases and the corresponding Rayleigh number (Ra) ranges from 104 - 105 and Prandtl number (Pr) 0.05 - 0.07. Finally, parametric study is carried out to evaluate the effect of length, thickness and number of longitudinal fins on the thermal performance of PCM-LHTES (Latent Heat Thermal Energy Storage) system associated with the physics of natural convection process during PCM melting.
基金funded through the basic DLR funding of the Helmholtz AssociationSpecific support for several projects was given by the German Federal Ministry of Economics and Technology and the German Federal Ministry for the Environment,Nature Conservation and Nuclear SafetyThe CellFlux project is funded by E.ON AG as part of the International Research Initiative.Responsibility for the content of this publication lieswith the authors
文摘Thermal energy storage(TES)is a key technology for renewable energy utilization and the improvement of the energy efficiency of heat processes.Sectors include industrial process heat and conventional and renewable power generation.TES systems correct the mismatch between supply and demand of thermal energy.In the medium to high temperature range(100~1000℃),only limited storage technology is commercially available and a strong effort is needed to develop a range of storage technologies which are efficient and economical for the very specific requirements of the different application sectors.At the DLR's Institute of Technical Thermodynamics,the complete spectrum of high temperature storage technologies,from various types of sensible over latent heat to thermochemical heat storages are being developed.Different concepts are proposed depending on the heat transfer fluid(synthetic oil,water/steam,molten salt,air)and the required temperature range.The aim is the development of cost effective,efficient and reliable thermal storage systems.Research focuses on characterization of storage materials,enhancement of internal heat transfer,design of innovative storage concepts and modelling of storage components and systems.Demonstration of the storage technology takes place from laboratory scale to field testing(5 kW^1 MW).The paper gives an overview on DLR's current developments.
文摘Adding fins to a shell-and-tube phase change thermal storage is a simple and effective way to enhance the performance of the phase change heat storage unit,and the proper arrangement of the fins is essential to enhance the performance of the storage unit.To enhance the performance of the triplex-tube thermal storage unit,a novel V-shaped fin structure is presented in this paper.And the heat storage performance of the thermal storage system is studied by numerical simulation.Firstly,the performance of the triplex-tube thermal energy storage unit with different arrangements of V-shaped fins is investigated by a two-dimensional model and compared with the use of the traditional rectangular fin structure,and the optimal fin arrangement is derived.The results show that the V-shaped fins with the optimal arrangement can decrease the time for the PCM melting in the heat storage unit by 31.92%compared to the conventional rectangular fins.On this basis,the influence of fin angle and thickness on the heat storage unit was studied.Then,a three-dimensional model of the thermal storage unit was established.And the effect of the flow parameters(inlet temperature,inlet flow rate)of the heat transfer fluid(HTF)on its performance was discussed in detail.Finally,the stored energy analysis of the whole thermal storage unit is carried out.
