Research on Leading Edge Erosion and Aerodynamic Characteristics of Wind Turbine Blade Airfoil

The effects of the erosion present on the leading edge of a wind turbine airfoil(DU 96-W-180)on its aerodynamic performances have been investigated numerically in the framework of a SST k–ωturbulence model based on the Reynolds Averaged Navier-Stokes equations(RANS).The results indicate that when sand-induced holes and small pits are involved as leading edge wear features,they have a minimal influence on the lift and drag coefficients of the airfoil.However,if delamination occurs in the same airfoil region,it significantly impacts the lift and resistance characteristics of the airfoil.Specifically,as the angle of attack grows,there is a significant decrease in the lift coefficient accompanied by a sharp increase in the drag coefficient.As wear intensifies,these effects gradually increase.Moreover,the leading edge wear can exacerbate flow separation near the trailing edge suction surface of the airfoil and cause forward displacement of the separation point.

Train-induced aerodynamic characteristics of vertical sound barriers influenced by several factors

Investigations into the aerodynamic properties of vertical sound barriers exposed to high-speed operations employ computational fluid dynamics.The primary focus of this research is to evaluate the influence of train speed and the distance(D)from the track centerline under various operating conditions.The findings elucidate a marked elevation in the aerodynamic effect amplitude on sound barriers as train speeds increase.In single-train passages,the aerodynamic effect amplitude manifests a direct relationship with the square of the train speed.When two trains pass each other,the aerodynamic amplitude intensifies due to an additional aerodynamic increment on the sound barrier.This increment exhibits an approximate quadratic correlation with the retrograde train speed.Notably,the impact of high-speed trains on sound barrier aerodynamics surpasses that of low-speed trains,and this discrepancy amplifies with larger speed differentials between trains.Moreover,the train-induced aerodynamic effect diminishes significantly with greater distance(D),with occurrences of pressure coefficient(CP)exceeding the standard thresholds during dual-train passages.This study culminates in the formulation of universal equations for quantifying the influence of train speed and distance(D)on sound barrier aerodynamic characteristics across various operational scenarios.

Impact of Blade-Flapping Vibration on Aerodynamic Characteristics of Wind Turbines under Yaw Conditions

Although the aerodynamic loading of wind turbine blades under various conditions has been widely studied,the radial distribution of load along the blade under various yaw conditions and with blade flapping phenomena is poorly understood.This study aims to investigate the effects of second-order flapwise vibration on the mean and fluctuation characteristics of the torque and axial thrust of wind turbines under yaw conditions using computational fluid dynamics(CFD).In the CFD model,the blades are segmented radially to comprehensively analyze the distribution patterns of torque,axial load,and tangential load.The following results are obtained.(i)After applying flapwise vibration,the torque and axial thrust of wind turbines decrease in relation to those of the rigid model,with significantly increased fluctuations.(ii)Flapwise vibration causes the blades to reciprocate along the axial direction,altering the local angle of attack and velocity of the blades relative to the incoming wind flow.This results in the contraction of the torque region from a circular shape to a complex“gear”shape,which is accompanied by evident oscillations.(iii)Compared to the tangential load,the axial load on the blades is more sensitive to flapwise vibration although both exhibit significantly enhanced fluctuations.This study not only reveals the impact of flapwise vibration on wind turbine blade performance,including the reduction of torque and axial thrust and increased operational fluctuations,but also clarifies the radial distribution patterns of blade aerodynamic characteristics,which is of great significance for optimizing wind turbine blade design and reducing fatigue risks.

Analysis and Research on Aerodynamic Characteristics of Quad Tilt Rotor Aircraft

For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of the quad tilt rotor aircraft. Firstly, a numerical simulation method for the interference flow field of the quad tilt rotor aircraft is established. Based on this method, the aerodynamic characteristics of isolated rotors, rotor combinations at different lateral positions on the wing, and rotor rotation directions under different inflow velocities were calculated and analyzed, in order to grasp their aerodynamic interference laws and provide reference for the design and control theory research of such aircraft.

Research on the Aerodynamic Characteristics of Leading Edge and Bulge of Ram-Air Parafoil Based on CFD

This study focuses on the aerodynamic characteristics and flow mechanism of three different configurations of ram-air parafoil with open/closed air inlet and bulges. Firstly, we designed a special parafoil configuration for this study. Then we used numerical simulation to obtain the aerodynamic data of three parafoils at different angles of attack, and studied the influence of the bulge and the leading edge open/closed inlet on the aerodynamic performance of the ram-air parafoil. Finally, we study the flow mechanism of the ram-air parafoil through the pressure distribution and flow field. The results of the study show that compared with the aerodynamic parameters of the parafoil without bulges, the optimal angle of attack of the two parafoils with bulges is increased by 4?, the maximum lift to drag ratio of the parafoil with closed leading edge is reduced by about 4.3% and the optimal angle of attack is reduced by about 2?. The maximum lift to drag ratio of the parafoil with open leading edge is reduced by about 23.6% and the stalling angle of attack is reduced by about 4?. The pressure on the surface of a ram-air parafoil with open leading edge inlet is the highest. .

NUMERICAL INVESTIGATION OF AERODYNAMIC AND MIXING CHARACTERISTICS OF SCARFED LOBED MIXER FOR TURBOFAN ENGINE EXHAUST SYSTEM

The flow field and aerodynamic performances for the scarfed lobed forced mixer are studied based on a computational fluid dynamics（CFD） technique. A series of computations are conducted to obtain the effects of the bypass ratio and the scarf angle on the mixing performance for the scarfed lobed mixer. Results show that the scarfed lobed mixer is reduced in the system weight. Meanwhile, aerodynamic performances are slightly improved compared with the normal lobed mixer. Two reasons for causing the mixing enhancement between the core and the bypass flow are as follows： （1） The stream-wise vortices shed from the training edge of the half/full scarfed lobed mixer earlier is enhanced by about 25%. （2） The mixing augmentation is also associated with the increase of the interface length caused by scarfing. The thermal mixing efficiency is enhanced with the increase of the bypass ratio and the scarfing angle. The scarfed lobed mixer design has no negative effects on the pressure loss. The total pressure recovery coefficient reaches above 0. 935 in various bypass ratios and scarfed angles. As the bypass ratio increases, the total pressure recovery coefficient also increases for the scarfed lobed mixer.

Influence of Flap Parameters on the Aerodynamic Performance of a Wind-Turbine Airfoil

A numerical method has been used to analyze the flow field related to a NACA 0015 airfoil with and without a flap and assess the influence of the flap height and angle on the surface pressure coefficient,lift coefficient,and drag coefficient.The numerical results demonstrate that the flap can effectively improve the lift coefficient of the airfoil;however,at small attack angles,its influence is significantly reduced.When the angle of attack exceeds the critical stall angle and the flap height is 1.5%of the chord length,the influence of the flap becomes very evident.As the flap height increases,the starting point of the separation vortex gradually moves forward and generates a larger wake vortex.Optimal aerodynamic characteristics are obtained for 1.5%(of the chord length)flap height and a 45°flap angle;in this case,the separation vortex is effectively reduced.

Influence of Surface Ice Roughness on the Aerodynamic Performance of Wind Turbines

The focus of this research was on the equivalent particle roughness height correction required to account for the presence of ice when determining the performances of wind turbines.In particular,two icing processes(frost ice and clear ice)were examined by combining the FENSAP-ICE and FLUENT analysis tools.The ice type on the blade surfaces was predicted by using a multi-time step method.Accordingly,the influence of variations in icing shape and ice surface roughness on the aerodynamic performance of blades during frost ice formation or clear ice formation was investigated.The results indicate that differences in blade surface roughness and heat flux lead to disparities in both ice formation rate and shape between frost ice and clear ice.Clear ice has a greater impact on aerodynamics compared to frost ice,while frost ice is significantly influenced by the roughness of its icy surface.

Study on transient aerodynamic characteristics of parachute opening process

In the research of parachute, canopy inflation process modeling is one of the most complicated tasks. As canopy often experiences the largest deformations and loa-dings during a very short time, it is of great difficulty for theoretical analysis and experimental measurements. In this paper, aerodynamic equations and structural dynamics equations were developed for describing parachute opening process, and an iterative coupling solving strategy incorpo- rating the above equations was proposed for a small-scale, flexible and flat-circular parachute. Then, analyses were carried out for canopy geometry, time-dependent pressure difference between the inside and outside of the canopy, transient vortex around the canopy and the flow field in the radial plane as a sequence in opening process. The mechanism of the canopy shape development was explained from perspective of transient flow fields during the inflation process. Experiments of the parachute opening process were conducted in a wind tunnel, in which instantaneous shape of the canopy was measured by high velocity camera and the opening loading was measured by dynamometer balance. The theoretical predictions were found in good agreement with the experimental results, validating the proposed approach. This numerical method can improve the situation of strong dependence of parachute research on wind tunnel tests, and is of significance to the understanding of the mechanics of parachute inflation process.

Influence of pantograph fixing position on aerodynamic characteristics of high-speed trains

To study the influence of the pantograph fixing position on aerodynamic characteristics of high-speed trains, the aerodynamic models of high-speed trains with eight cars were established based on the theory of com- putational fluid dynamics, and eight cases with pantographs fixed on different positions and in different operational orientations were considered. The pantographs were fixed on the front or the rear end of the first middle car or fixed on the front or the rear end of the last middle car. The external flow fields of the high-speed trains were numeri- cally simulated using the software STAR-CCM＋. The results show that the pantograph fixing position has little effect on the aerodynamic drag force of the head car and has a large effect on the aerodynamic drag force of the tail car. The influences of the pantograph fixing position on the aerodynamic lift forces of the head car, tail car and pan- tographs are obvious. Among the eight cases, considering the total aerodynamic drag force of the train and the aerodynamic lift force of the lifted pantograph, when the pantographs are fixed on the rear end of the last middle car and the lifted pantograph is in the knuckle-upstream ori- entation, the aerodynamic performance of the high-speed train is the best.

Aerodynamic Characteristics,Power Requirements and Camber Effects of the Pitching-Down Flapping Hovering

The pitching-down flapping is a new type of bionic flapping,which was invented by the author based on previous studies on the aerodynamic mechanisms of fruit fly(pitching-up)flapping.The motivation of this invention is to improve the aerodynamic characteristics of flapping Micro Air Vehicles(MAVs).In this paper the pitching-down flapping is briefly introduced.The major works include:(1)Computing the power requirements of pitching-down flapping in three modes(advanced,symmetrical, delayed),which were compared with those of pitching-up flapping;(2)Investigating the effects of translational acceleration time,Δτ_t,and rotational time,Δτ_r,at the end of a stroke,and the angle of attack,α,in the middle of a stroke on the aerodynamic characteristics in symmetrical mode;(3)Investigating the effect of camber on pitching-down flapping.From the above works, conclusions can be drawn that:(1)Compared with the pitching-up flapping,the pitching-down flapping can greatly reduce the time-averaged power requirements;(2)The increase in Δτt and the decrease in Δτ_r can increase both the lift and drag coefficients, but the time-averaged ratio of lift to drag changes a little.And α has significant effect on the aerodynamic characteristics of the pitching-down flapping;(3)The positive camber can effectively increase the lift coefficient and the ratio of lift to drag.

Experimental study on aerodynamic characteristics of a high-speed train on viaducts in turbulent crosswinds

In this study, experiments were carried out to investigate aerodynamic characteristics of a high-speed train on viaducts in turbulent crosswinds using a 1:25 scaled sectional model wind-tunnel testing. Pressure measurements of two typical sections, one train-head section and one train-body section, at the windward and leeward tracks were conducted under the smooth and turbulence flows with wind attack angles between-6° and 6°, and the corresponding aerodynamic force coefficients were also calculated using the integral method. The experimental results indicate that the track position affects the mean aerodynamic characteristics of the vehicle, especially for the train-body section. The fluctuating pressure coefficients at the leeward track are more significantly affected by the bridge interference compared to those at the windward track. The effect of turbulence on the train-head section is less than that on the train-body section. Additionally, the mean aerodynamic force coefficients are almost negatively correlated to wind attack angles, which is more prominent for vehicles at the leeward track. Moreover, the lateral force plays a critical role in determining the corresponding overturning moment, especially on the train-body section.

Numerical Calculations of Aerodynamic and Acoustic Characteristics for Scissor Tail-Rotor in Forward Flight

The aerodynamic and aeroacoustic characteristics of a scissor tail-rotor in a forward flight are numerically calculated.A novel computational fluid dynamics(CFD)model based on Navier-Stokes(N-S)equations is presented to simulate the unsteady flowfield and the aerodynamic characteristics of a scissor tail-rotor in the forward flight.Then the Farassat Formulation 1 Aderived from the FW-H equation is coupled into the CFD model in order to compute the aeroacoustic characteristics of the scissor tail-rotor.In addition,two different scissor tail-rotor configurations,i.e.,the L-and U-configuration,are analyzed in details and compared with a conventional one.The influence of scissor angles on the aerodynamic and aeroacoustic characteristics of the scissor tail-rotor is also investigated.The simulation results demonstrate that the flowfield,aerodynamic force and aeroacoustic characteristics of a scissor tail-rotor are significantly different from the conventional one,and the aerodynamic interaction decreases with the increase of scissor angle,which leads to a reduction of amplitude variation of the tail-rotor thrust in the forward flight.The scissor angle has an important effect on the aerodynamics and aeroacoustics of the scissor tail-rotor.

Numerical simulation of subsonic and transonic flow flieds and aerodynamic characteristics of anti-tank intelligent mine

Anti-tank intelligent mine is a kind of new intelligent anti-tank bomb relying on high precision detector.It can effectively capture and damage targets with wind resistance coefficient and other factors affecting its flight characteristics under consideration.This article is based on the three-dimensional model of intelligent mine.To analyze its subsonic and transonic flow fields and the change law of aerodynamic force factor with the growth of the angle of attack,computational fluid dynamics software is used for intelligent mine flow field numerical calculation and the change law of pressure center.The results show that the large drag coefficient is conducive to the stability of scanning.Drastic changes of the flow field near the intelligent mine will disable its scanning movement.The simulation results can provide a reference for scanning stability analysis,overall performance optimization and appearance improvement.

Experimental Study on Aerodynamic Characteristics of the Model Wind Rotor System and on Characterization of A Wind Generation System

In order to investigate the aerodynamic characteristics of 6-MW wind turbine, experimental study on the aerodynamic characteristics of the model rotor system and on characterization of a wind generation system is carried out. In the test, a thrust-matched rotor system and a geometry-matched rotor system, which utilize redesigned thrustmatched and original geometry-matched blades, respectively, are applied. The 6-MW wind turbine system is introduced briefly. The proper scaling laws for model tests are established in the paper, which are then implemented in the construction of a model wind turbine with optimally designed blades. And the parameters of the model are provided. The aerodynamic characteristics of the proposed 6-MW wind rotor system are explored by testing a 1:65.3 scale model at the State Key Laboratory of Ocean Engineering at Shanghai Jiao Tong University. Before carrying out the wind rotor system test, the turbulence intensity and spatial uniformity of the wind generation system are tested and results demonstrate that the characterization of the wind generation system is satisfied and the average turbulence intensity of less than 10% within the wind rotor plane is proved in the test. And then, the aerodynamic characteristics of 6-MW wind rotor system are investigated. The response characteristic differences between the thrust-matched rotor system and the geometry-matched rotor system are presented. Results indicate that the aerodynamic characteristics of 6-MW wind rotor with the thrust-matched rotor system are satisfied. The conclusion is that the thrust-matched rotor system can better reflect the characteristics of the prototype wind turbine. A set of model test method is proposed in the work and preparations for further model basin test of the 6-MW SPAR-type floating offshore wind turbine system are made.

Numerical Optimization on Aerodynamic/Stealth Characteristics of Airfoil Based on CFD/CEM Coupling Method

Based on computational fluid dynamics （CFD）/computational eleetromagnetics method （CEM） coupling method and surrogate model optimization techniques, an integration design method about aerodynamic/stealth characteristics of airfoil is established. The O-type body-fitted and orthogonal grid around airfoil is first generated by using the Poisson equations, in which the points per wave and the normal range satisfy the aerodynamic and electromagnetic calculation accuracy requirement. Then the aerodynamic performance of airfoil is calculated by sol- ving the Navier-Stokes （N-S） equations with Baldwin-Lomax （B-L） turbulence model. The stealth characteristics of airfoil are simulated by using finite volume time domain （FVTD） method based on the Maxwell＇s equations, Steger-Warming flux splitting and the third-order MUSCL scheme. In addition, based upon the surrogate model optimization technique with full factorial design （FFD） and radial basis function （RBF）, an integration design about aerodynamic/stealth characteristics of rotor airfoil is conducted by employing the CFD/CEM coupling meth- od. The aerodynamic/stealth characteristics of NACA series airfoils with different maximum thickness and camber combinations are discussed. Finally, by choosing suitable lift-to-drag ratio and radar cross section （RCS） ampli- tudes of rotor airfoil in four important scattering regions as the objective function and constraint, the compromised airfoil with high lift-to-drag ratio and low scattering characteristics is designed via systemic and comprehensive ana- lyses.

Experimental Study of Effects of Tail Wings on Submunition Aerodynamic Characteristics

Aimed at the needs of deceleration of submunitions dispensed from the ballistic missile, wind tunnel tests were performed on the submunitions with different tail wing sizes at the Mach number range from 0.7 to 3.0 and the angle of attack range from 0° to 14°. Experimental data about the variance of aerodynamic coefficients with the Mach number and angle of attack were obtained systemically. The effects of the tail wing sizes on the drag coefficients and the center of pressure coefficients were discussed. Analyzed results show the arc tail wings designed are beneficial to both the deceleration effect and static stability. These results are significant to the tail wing design and its applications to the submunitions deceleration..

Numerical Analysis of Aerodynamic Characteristics of the HALE Diamond Joined-Wing Configuration UAV

The investigation on the aerodynamic characteristics of the high-attitude long-endurance (HALE) Diamond Joined-Wing configuration unmanned aerial vehicle ( UAV) was carried out by the theoretical analysis method and numerical simulation. Research indicates that as the wing of the UAV is composed of the front wing and the after wing, the after wing has the ability to transmit the front wing's boundary layer to the after wing root which can inhibit the front wing's flow separation. Although the front wing was affected by the retardation of the after wing, the aerodynamic performance of the front wing was better than that of alone front wing in most cases. The after wing was also affected by the wake and downwash of the front wing, and its aerodynamic performance was greatly decreased. The characteristic curve of the pitching moment of the UAV had nonlinear characteristics. The flow field structure of the after wing changed by the front wing wake direct sweep and flow separation at the after wing root were the main reasons that non-linear ′rise′phenomenon occurred in two segments ( α = 0° and α = 8° ) of the characteristic curve of pitching moment. Moreover, coupling of the flow separation characteristic of the front wing and the after wing resulted in the pitching moment ′pitchup′ phenomenon. The lateral-directional static stability of the flat layout was weak. The HALE Diamond Joined-Wing configuration UAV ' s aerodynamic performance can be improved and the problems in engineering applications can be effectively alleviated by adjusting the overall layout parameters.

Aerodynamic and trajectory characteristics of a typical mortar projectile with a deflectable nose

Deflectable nose control is a new trajectory correction method.In this paper,the aerodynamic and trajectory characteristics of a typical mortar projectile with a deflectable nose are investigated with respect to its flight conditions.Using the method of wind tunnel testing,the aerodynamic coefficients of four kinds of mortar models were measured under the conditions of different angles of attack from-10°to 10°and Mach numbers from 0.3 to 0.9.Based on the aerodynamic coefficients,the trajectory ranges at different nose deflection angles and times were calculated.Furthermore,a trajectory optimization was performed by reducing the static margin.The results and discussions show that the nose deflection provided limited lift,while the pitching moment varied significantly.The mortar obtained the extended flight range and trajectory correction ability with nose deflection.

ANALYTICAL APPROACH TO AERODYNAMIC CHARACTERISTICS OF THE HELICOPTER ROTOR WITH ANHEDRAL TIP SHAPE

A new analytical approach, based on a lifting surface model and a full span free wake analysis using the curved vortex element on the circular arc, is established for evaluating the aerodynamic characteristics of the helicopter rotor with an anhedral blade tip and is emphasized to be applicable to various blade tip configurations, such as the tapered, swept, anhedral and combined shapes. Sample calculations on the rotor aerodynamic characteristics for different anhedral tips in both hover and forward flight are performed. The results on the induced velocity, blade section lift distribution, tip vortex path and rotor performance are presented so that the effect of the anhedral tip on the rotor aerodynamic characteristics is fully analyzed.