A boundary layer analysis is presented to investigate numerically the effects of radiation, thermophoresis and the dimensionless heat generation or absorption on hydromagnetic flow with heat and mass transfer over a f...A boundary layer analysis is presented to investigate numerically the effects of radiation, thermophoresis and the dimensionless heat generation or absorption on hydromagnetic flow with heat and mass transfer over a flat surface in a porous medium. The boundary layer equations are transformed to non-linear ordinary differential equations using scaling group of transformations and they are solved numerically by using the fourth order Runge-Kutta method with shooting technique for some values of physical parameters. Comparisons with previously published work are performed and the results are found to be in very good agreement. Many results are obtained and a representative set is displayed graphically to illustrate the influence of the various parameters on the dimensionless velocity, temperature and concentration profiles as well as the local skin-friction coefficient, wall heat transfer, particle deposition rate and wall thermophoretic deposition velocity. The results show that the magnetic field induces acceleration of the flow, rather than deceleration （as in classical magnetohydrodynamics （MHD） boundary layer flow） but to reduce temperature and increase concentration of particles in boundary layer. Also, there is a strong dependency of the concentration in the boundary layer on both the Schmidt number and mass transfer parameter.展开更多
In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs ...In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs and AFM roughness profiles of treated samples and the contrast groups were obtained.Besides,XPS survey spectrums and high resolution spectrums were also investigated.The adhesion test revealed that ion bombardment could improve the adhesion to the polyurethane coating substrate.A better etching result of oxygen ions versus nitrogen predicts a higher bonding strength of zirconium coating on polyurethane and,indeed,the highest bonding strengths are for oxygen ion bombardment upto 13.3 MPa.As demonstrated in X-ray photoelectron spectroscopy,the oxygen ion also helps to introduce more active groups,and,therefore,it achieves a high value of adhesion strength.展开更多
文摘A boundary layer analysis is presented to investigate numerically the effects of radiation, thermophoresis and the dimensionless heat generation or absorption on hydromagnetic flow with heat and mass transfer over a flat surface in a porous medium. The boundary layer equations are transformed to non-linear ordinary differential equations using scaling group of transformations and they are solved numerically by using the fourth order Runge-Kutta method with shooting technique for some values of physical parameters. Comparisons with previously published work are performed and the results are found to be in very good agreement. Many results are obtained and a representative set is displayed graphically to illustrate the influence of the various parameters on the dimensionless velocity, temperature and concentration profiles as well as the local skin-friction coefficient, wall heat transfer, particle deposition rate and wall thermophoretic deposition velocity. The results show that the magnetic field induces acceleration of the flow, rather than deceleration （as in classical magnetohydrodynamics （MHD） boundary layer flow） but to reduce temperature and increase concentration of particles in boundary layer. Also, there is a strong dependency of the concentration in the boundary layer on both the Schmidt number and mass transfer parameter.
文摘In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs and AFM roughness profiles of treated samples and the contrast groups were obtained.Besides,XPS survey spectrums and high resolution spectrums were also investigated.The adhesion test revealed that ion bombardment could improve the adhesion to the polyurethane coating substrate.A better etching result of oxygen ions versus nitrogen predicts a higher bonding strength of zirconium coating on polyurethane and,indeed,the highest bonding strengths are for oxygen ion bombardment upto 13.3 MPa.As demonstrated in X-ray photoelectron spectroscopy,the oxygen ion also helps to introduce more active groups,and,therefore,it achieves a high value of adhesion strength.
