The study on three Pb Ca Sn Al alloys with 0.08%, 0.4% and 1.0% of Ce indicates that the addition of Ce results in an obvious increase in the tensile strength and hardness of the alloys, an increase in the overpotenti...The study on three Pb Ca Sn Al alloys with 0.08%, 0.4% and 1.0% of Ce indicates that the addition of Ce results in an obvious increase in the tensile strength and hardness of the alloys, an increase in the overpotentials of hydrogen and oxygen evolution and the corrosion resistance as well. The study on the corrosion film formed on the alloys by cyclic voltammetry shows that the addition of Ce slows down the formation of corrosion film. It is therefore concluded from the experimental results that the addition of Ce can increase the tensile strength and HB of Pb Ca alloy and the tensile strength and HB of the alloy increase with the increase of Ce; the addition of Ce also increases the hydrogen and oxygen evolution overpotentials of Pb Ca alloy, and when the content of Ce is 1.0%, the alloy has the highest hydrogen and oxygen evolution overpoteatials; the addition of Ce improves the anticorrosion capability of the alloy, and when the content Ce is 1.0%, the alloy has the best anticorrosion capability; and the addition of Ce also slows down the formation of corrosion film.展开更多
The effect of barium additives on the process of anodic corrosion of lead-tin-calcium alloys in a 4.8 М sulfuric acid solution was studied. Cyclic voltammetry, impedance spectroscopy, weight loss measurements and sca...The effect of barium additives on the process of anodic corrosion of lead-tin-calcium alloys in a 4.8 М sulfuric acid solution was studied. Cyclic voltammetry, impedance spectroscopy, weight loss measurements and scanning electronic microscope analysis have allowed exploring the oxidation process and characterizing the formed corrosion layer. According to our results, barium introduction into lead-tin-calcium alloys increases their hardness, reduces their electrochemical activity, and improves their corrosion stability. Reduction of the calcium content in the alloy can be compensated by adding barium. Barium dopation at lead-tin-calcium alloys decreases the resistance of the oxide layer formed on the grid surface, in a deeply discharged state, and raises its resistance during floating conditions and at a charged state of the positive electrode.展开更多
A detailed investigation on Pb-Ca-Sn alloys was made in order to choose suitable grid alloys materials for thin plate lead-acid batteries. The electrochemical performances of alloys were investigated by electrochemica...A detailed investigation on Pb-Ca-Sn alloys was made in order to choose suitable grid alloys materials for thin plate lead-acid batteries. The electrochemical performances of alloys were investigated by electrochemical corrosion experiment, scanning electron microscope (SEM), and cyclic voltammetry (CV) test. The results indicate that Pb-Ca-Sn-Bi-Cu alloys can be used to make the grids used for thin grid lead-acid batteries, the content of bismuth has primary effects on the corrosion resistance of grid alloys, the composition of alloys plays an important role on batteries performance, and appropriate scale of elements can be choosed to obtain optimal electrochemical performance. The lead-acid batteries using this kind of grid show good performance by cycle life test.展开更多
利用线性电位扫描、恒电位阶跃、交流阻抗等方法分别研究了Pb Ca Bi合金被阳极或阴极极化后,表面上析氧、析氢以及合金腐蚀行为。结果表明:与Pb Ca合金相比,Pb Ca Bi合金可增加氧的析出,但抑制氢的析出,同时铋的加入,使Pb Ca耐蚀性提高...利用线性电位扫描、恒电位阶跃、交流阻抗等方法分别研究了Pb Ca Bi合金被阳极或阴极极化后,表面上析氧、析氢以及合金腐蚀行为。结果表明:与Pb Ca合金相比,Pb Ca Bi合金可增加氧的析出,但抑制氢的析出,同时铋的加入,使Pb Ca耐蚀性提高,且不同含量的铋对合金腐蚀有不同的影响。展开更多
文摘The study on three Pb Ca Sn Al alloys with 0.08%, 0.4% and 1.0% of Ce indicates that the addition of Ce results in an obvious increase in the tensile strength and hardness of the alloys, an increase in the overpotentials of hydrogen and oxygen evolution and the corrosion resistance as well. The study on the corrosion film formed on the alloys by cyclic voltammetry shows that the addition of Ce slows down the formation of corrosion film. It is therefore concluded from the experimental results that the addition of Ce can increase the tensile strength and HB of Pb Ca alloy and the tensile strength and HB of the alloy increase with the increase of Ce; the addition of Ce also increases the hydrogen and oxygen evolution overpotentials of Pb Ca alloy, and when the content of Ce is 1.0%, the alloy has the highest hydrogen and oxygen evolution overpoteatials; the addition of Ce improves the anticorrosion capability of the alloy, and when the content Ce is 1.0%, the alloy has the best anticorrosion capability; and the addition of Ce also slows down the formation of corrosion film.
文摘The effect of barium additives on the process of anodic corrosion of lead-tin-calcium alloys in a 4.8 М sulfuric acid solution was studied. Cyclic voltammetry, impedance spectroscopy, weight loss measurements and scanning electronic microscope analysis have allowed exploring the oxidation process and characterizing the formed corrosion layer. According to our results, barium introduction into lead-tin-calcium alloys increases their hardness, reduces their electrochemical activity, and improves their corrosion stability. Reduction of the calcium content in the alloy can be compensated by adding barium. Barium dopation at lead-tin-calcium alloys decreases the resistance of the oxide layer formed on the grid surface, in a deeply discharged state, and raises its resistance during floating conditions and at a charged state of the positive electrode.
文摘A detailed investigation on Pb-Ca-Sn alloys was made in order to choose suitable grid alloys materials for thin plate lead-acid batteries. The electrochemical performances of alloys were investigated by electrochemical corrosion experiment, scanning electron microscope (SEM), and cyclic voltammetry (CV) test. The results indicate that Pb-Ca-Sn-Bi-Cu alloys can be used to make the grids used for thin grid lead-acid batteries, the content of bismuth has primary effects on the corrosion resistance of grid alloys, the composition of alloys plays an important role on batteries performance, and appropriate scale of elements can be choosed to obtain optimal electrochemical performance. The lead-acid batteries using this kind of grid show good performance by cycle life test.
