Solvothermal Synthesis,Crystal Structure and Luminescent Property of a Two-dimensional Lead(Ⅱ) Compound：[Pb(bmzbc)2]n

A two-dimensional coordination polymer, [Pb（bmzbc）2]n（1）（Hbmzbc =4-benzimidazole-1-yl-benzoic acid）, has been synthesized by the solvothermal reaction of Pb（NO3）2 with Hbmzbc at 120 ℃ in ethanol solvent. Compound 1 has been characterized by single-crystal X-ray diffraction, powder X-ray diffraction, thermogravimetry analysis, and IR spectrum. Compound 1 crystallizes in the orthorhombic system, space group Pccn, with a = 12.5801（7）, b = 20.0795（11）, c = 9.1830（6） ？, V = 2319.6（2） A^3, Z = 4, C（28）H（18）N4O4Pb, Mr = 681.65, Dc = 1.952 g/cm^3, μ = 7.319 mm^-1, F（000） = 1312, the final R = 0.0336 and wR = 0.0965 for 1699 observed reflection with I 〉 2σ（I）. In 1, the bmzbc^– ligands bridge the Pb（Ⅱ） ions to generate a 2-D sheet with（4, 4） topology. The complex exhibits turquoise photoluminescent emission with a maximum at 480 nm upon excitation at 300 nm.

Solvothermal Synthesis,Crystal Structure and Photoluminescence Property of a 3D Lead(Ⅱ)Coordination Polymer Based on Terephthalic Acid

Solvothermal reaction of Pb（NO3）2·6H2O with rigid linear ligand terephthalic acid（H2pta） in N,N-dimethylformamide（DMF） produced a new three-dimensional（3D） lead（Ⅱ）coordination polymer[Pb2（pta）1.5（μ4-OH）（DMF）]n 1,and its structure was characterized by single-crystal X-ray diffraction analyses.In polymer 1,the μ4-OH bridges the nearby lead（Ⅱ） ions into an infinite one-dimensional（1D） chain,and then the organic ligand pta^2- joins the neighbored chains into a 3D structure by two similar connection modes in different configurations.The solid-state photoluminescent studies revealed that 1 exhibits a strong greenish emission mainly originating from ligand-to-metal charge transfer between the delocalized π bonds of the aromatic carboxylate ligand pta^2- and the p orbitals of the Pb^2＋ centers.

Local Structure Analysis of Lead Zinc Niobate-Barium Titanate Ceramic by X-Ray Absorption Spectroscopy and Density Functional Calculation

The local structure of an alternative Pb（Zn1/3Nb2/3）O3-based perovskite ceramic is investigated. The 0.07BaTiO33-0.93Pb（Zn1/3Nb2/3）O3 ceramic is synthesized using a combination of Zn3Nb2O8 B-site precursor and BaTiO33 perovskite phase stabilizer. Then, x-ray absorption spectroscopy and density functional theory are employed to calculate the local structure configuration and formation energy of the prepared samples. Ba2＋ is found to replace Pb2＋ in AA-site with Zn2＋ occupying BB-site in Pb（Zn1/3Nb2/3）O3, while in the neighboring structure, Ti4＋4＋ replaces Nb5＋5＋ in BB-site with Pb2＋2＋ occupying AA-site. With the substitution of BaTiO33 in Pb（Zn1/3Nb2/3）O3, the bond length between Zn2＋ and Pb2＋ is longer than that of the typical perovskite phase of Pb（Zn1/3Nb2/3）O3. This indicates the key role of BaTiO33 in decreasing the steric hindrance of Pb2＋ lone pair, and the mutual interactions between Pb2＋ lone pair and Zn2＋ and the formation energy is seen to decrease. This finding of the formation energy and local structure configuration relationship can further extend a fundamental understanding of the role of BaTiO33 in stabilizing the perovskite phase in PbZn13Nb23O3-based materials, which in turn will lead to an improved preparation technique for desired electrical properties.

Mass and performance optimization of an airplane wing leading edge structure against bird strike using Taguchi-based grey relational analysis

Collisions between birds and aircraft are one of the most dangerous threats to flight safety. In this study, smoothed particles hydrodynamics(SPH) method is used for simulating the bird strike to an airplane wing leading edge structure. In order to verify the model, first, experiment of bird strike to a flat aluminum plate is simulated, and then bird impact on an airplane wing leading edge structure is investigated. After that, considering dimensions of wing internal structural components like ribs, skin and spar as design variables, we try to minimize structural mass and wing skin deformation simultaneously. To do this, bird strike simulations to 18 different wing structures are made based on Taguchi’s L18 factorial design of experiment. Then grey relational analysis is used to minimize structural mass and wing skin deformation due to the bird strike. The analysis of variance(ANOVA) is also applied and it is concluded that the most significant parameter for the performance of wing structure against impact is the skin thickness. Finally, a validation simulation is conducted under the optimal condition to show the improvement of performance of the wing structure.

Effect of the CaO/SiO2 mass ratio and FeO content on the viscosity of CaO–SiO2–“FeO”–12wt%ZnO–3wt%Al2O3 slags

An effective process for recycling lead from hazardous waste cathode ray tubes（CRTs） funnel glass through traditional lead smelting has been presented previously. The viscous behavior of the molten high lead slag, which is affected by the addition of funnel glass, plays a critical role in determining the production efficiency. Therefore, the viscosities of the CaO–SiO_2–＂FeO＂–12wt%ZnO–3wt%Al_2O_3 slags were measured in the current study using the rotating spindle method. The slag viscosity decreases as the CaO/SiO_2 mass ratio is increased from 0.8 to 1.2 and also as the FeO content is increased from 8wt% to 20wt%. The breaking temperature of the slag is lowered substantially by the addition of FeO, whereas the influence of the CaO/SiO_2 mass ratio on the breaking temperature is complex. The structural analysis of quenched slags using Fourier transform infrared（FTIR） spectroscopy and Raman spectroscopy reveals that the silicate network structure is depolymerized with increasing CaO/SiO_2 mass ratio or increasing FeO content. The [FeO_6]-octahedra in the slag melt increase as the CaO/SiO_2 mass ratio or the FeO content increases. This increase can further decrease the degree of polymerization（DOP） of the slag. Furthermore, the activation energy for viscous flow decreases both with increasing CaO/SiO_2 mass ratio and increasing FeO content.

The hit-to-lead optimization of 1,2,3,4,4a,9a-hexahydro-1H-xanthenes as glucocorticoid receptor antagonists

The structure–activity relationship（SAR） study of a 1 2 3 4 4a 9a-hexahydro-1H-xanthene series of selective,human glucocorticoid receptor a（hGRa） antagonists is reported.Compounds were screened using hydroxyapatite-based GR binding and MMTV-Luc co-transfection reporter gene assays.Four different regions of the scaffold were modified to assess the effects on hGRa antagonism and related potency.Compound 8d exhibits an 8-fold better bioactivity than the original hit 1a,as well as an improved chemical stability,which make it a promising lead for the subsequent optimization.