BACKGROUND： Studies have demonstrated that lead exposure can result in cognitive dysfunction and behavior disorders. However, lead exposure impairments vary under different experimental conditions. OBJECTIVE： To det...BACKGROUND： Studies have demonstrated that lead exposure can result in cognitive dysfunction and behavior disorders. However, lead exposure impairments vary under different experimental conditions. OBJECTIVE： To detect changes in spatial learning and memory following low-level lead exposure in rats, in Morris water maze test under the same experimental condition used to analyze lead exposure effects on various memory types and learning processes. DESIGN AND SETTING： The experiment was conducted at the Animal Laboratory, Institute of Psychology, Chinese Academy of Science between February 2005 and March 2006. One-way analysis of variance （ANOVA） and behavioral observations were performed. MATERIALS： Sixteen male, healthy, adult, Sprague Dawley rats were randomized into normal con-trol and lead exposure groups （n = 8）. METHODS： Rats in the normal control group were fed distilled water, and those in the lead exposure group were fed 250 mL of 0.05% lead acetate once per day. At day 28, all rats performed the Morris water maze test, consisting of four phases： space navigation, probe test, working memory test, and visual cue test. MAIN OUTCOME MEASURES： Place navigation in the Morris water maze was used to evaluate spatial learning and memory, probe trials for spatial reference memory, working memory test for spatial working memory, and visual cue test for non-spatial cognitive function. Perkin-Elmer Model 300 Atomic Absorption Spectrometer was utilized to determine blood lead levels in rats. RESULTS： （1） In the working memory test, the time to reach the platform remained unchanged between the control and lead exposure groups （F（1,1） = 0.007, P = 0.935）. A visible decrease in escape latencies was observed in each group （P = 0.028）. However, there was no significant difference between the two groups （F（1,1） = 1.869, P = 0.193）. The working memory probe test demonstrated no change between the two groups in the time spent in the target quadrant during the working memory probe test （F（1,1） = 1.869, P = 0.193）. However, by day 4, differences were observed in the working memory test （P 〈 0.01）. （2） Multivariate repetitive measure and ANOVA in place navigation presented no significant difference between the two groups （F（1,1） = 0.579, P = 0.459）. （3） Spatial probe test demonstrated that the time to reach the platform was significantly different between the two groups （F（1,1） = 4.587, P = 0.048）, and one-way ANOVA showed no significant difference in swimming speed between the two groups （F（1,1） = 1.528, P = 0.237）. （4） In the visual cue test, all rats reached the platform within 15 seconds, with no significant difference （F（1,1） = 0.579, P = 0.459）. （5） During experimentation, all rats increased in body mass, but there was no difference between the two groups （F（1,1） = 0.05, P = 0.943）. At day 28 of 0.05% lead exposure, the blood lead level was 29.72 μg/L in the lead exposure group and 5.86 μg/L in the control group （P 〈 0.01）. CONCLUSION： The present results revealed low-level lead exposure significantly impaired spatial reference memory and spatial working memory, but had no effect on spatial learning.展开更多
Editor’s Note:After becoming theleading force in CDMAequipment manufacturingin China, ZTE rolled outits self-developed WCD-MA products that at-tracted much expert at-tention in the MTNETsecond phase single sys- tem t...Editor’s Note:After becoming theleading force in CDMAequipment manufacturingin China, ZTE rolled outits self-developed WCD-MA products that at-tracted much expert at-tention in the MTNETsecond phase single sys- tem testing completed inJune 2003. Thefollowing are the remarks of Ye Weimin,ZTE’s vice president, on ZTE’s strate-gies, advantages and achievements inthe development of WCDMA products.展开更多
Firstly an overview of the potential impact on work-in-process （WIP） and lead time is provided when transfer lot sizes are undifferentiated from processing lot sizes. Simple performance examples are compared to thos...Firstly an overview of the potential impact on work-in-process （WIP） and lead time is provided when transfer lot sizes are undifferentiated from processing lot sizes. Simple performance examples are compared to those from a shop with one-piece transfer lots. Next, a mathematical programming model for minimizing lead time in the mixed-model job shop is presented, in which one-piece transfer lots are used. Key factors affecting lead time are found by analyzing the sum of the longest setup time of individual items among the shared processes （SLST） and the longest processing time of individual items among processes （LPT）. And lead time can be minimized by cutting down the SLST and LPT. Reduction of the SLST is described as a traveling salesman problem （TSP）, and the minimum of the SLST is solved through job shop scheduling. Removing the bottleneck and leveling the production line optimize the LPT. If the number of items produced is small, the routings are relatively short, and items and facilities are changed infrequently, the optimal schedule will remain valid. Finally a brief example serves to illustrate the method.展开更多
Children and adults are often exposed to lead in homes as a result of deteriorating lead-based paint surfaces and any disturbance to those surfaces. There are a number of laws, regulations, standards and guidance docu...Children and adults are often exposed to lead in homes as a result of deteriorating lead-based paint surfaces and any disturbance to those surfaces. There are a number of laws, regulations, standards and guidance documents in place aimed at minimization of lead dust contamination following renovation and repair activities. These laws and regulations are oftentimes confusing and conflicting for the maintenance contractor who has limited time and resources for researching the right and appropriate course of action. This paper provides a comprehensive review and discussion of the lead laws, regulations, standards and guidelines for contractors.展开更多
Painting contractors have struggled with implementation and assessment of lead exposure controls leading to persistently elevated blood lead levels in this high-risk group of workers. The objective of this study was t...Painting contractors have struggled with implementation and assessment of lead exposure controls leading to persistently elevated blood lead levels in this high-risk group of workers. The objective of this study was to assess the intensity of lead exposures based on commonly used air velocities inside field containment structures during abrasive blasting and vacuuming. Exposures were assessed over 14 days from April to July 2021 at a tainter gate and bridge lead paint removal project. Personal air samples, skin wipes, air velocity readings, and blood lead samples were collected. The geometric mean (GM) lead exposure for abrasive blasters and vacuumers was ≥4 × the OSHA Lead Permissible Exposure Limit (PEL) of 50 μg/m<sup>3</sup>. There was high variability in the personal lead exposures (Geometric standard deviation (GSD) 4.0 - 5.0). The GM hand wipe exposures exceeded a Dermal PEL of 500 μg/wipe (abrasive blaster 564 μg/wipe and vacuumer 754 μg/wipe). Residual lead was measured on workers’ hands in 67% of the post hand washing samples. Air velocities measured inside of the field containments ranged from 107 feet per minute to 229 feet per minute. The effect of air velocity on the concentration of lead on workers’ hands after work (F = 0.58, p = 0.35) and airborne lead concentration was not significant (F = 0.36, p = 0.48). Six of the eight workers’ blood lead levels increased after exposure to lead. There was a non-statistically significant relationship between lead remaining on workers’ hands after handwashing and an increase in blood lead level. This is the first study that assessed both ventilation flow rates used in the industrial painting industry and measurements of airborne and dermal (hands) lead exposures. For the projects evaluated, the collected exposure data indicate that air velocities frequently used in the industrial painting industry to ventilate field containment structures did not tend to prevent an increase in worker blood lead and were ineffective for adequately controlling elevated concentrations of airborne lead and preventing contact with workers’ hands.展开更多
Leaded brass alloys used progressively in many applications such as gas valves production owing to their excellent machinability, corrosion resistance and some other specifications. However, the production processes o...Leaded brass alloys used progressively in many applications such as gas valves production owing to their excellent machinability, corrosion resistance and some other specifications. However, the production processes of these alloys involve some problems appearing in the last activities of production as a result of cumulative defects of previous production processes. Therefore, the current investigation studies the effect of process parameters during casting, hot extrusion and cold drawing production stages of CuZn40Pb2 leaded brass alloy on the mechanical properties. Starting with casting process, two types of charges were used. The first charge consists of 100% recycles while the second contains 30% of pure materials such as Cu, Zn and Pb in addition to the recycles. For each production stage, alloy hardness, micro-hardness, ultimate tensile strength and elongation were examined. The results illustrated that high hardness values are obtained during casting process due to some impurities such as iron and the effect of cooling rate through solidification. The hardness values decrease during extrusion process and then rise again by cold drawing for the charge of 30% pure materials. Micro-hardness values for the fractured tensile test samples appeared higher than others due to work hardening effect. The best mechanical properties as ultimate tensile strength of CuZn40Pb2 alloy products are appeared into cold forming samples with the 30% pure material added.展开更多
文摘BACKGROUND： Studies have demonstrated that lead exposure can result in cognitive dysfunction and behavior disorders. However, lead exposure impairments vary under different experimental conditions. OBJECTIVE： To detect changes in spatial learning and memory following low-level lead exposure in rats, in Morris water maze test under the same experimental condition used to analyze lead exposure effects on various memory types and learning processes. DESIGN AND SETTING： The experiment was conducted at the Animal Laboratory, Institute of Psychology, Chinese Academy of Science between February 2005 and March 2006. One-way analysis of variance （ANOVA） and behavioral observations were performed. MATERIALS： Sixteen male, healthy, adult, Sprague Dawley rats were randomized into normal con-trol and lead exposure groups （n = 8）. METHODS： Rats in the normal control group were fed distilled water, and those in the lead exposure group were fed 250 mL of 0.05% lead acetate once per day. At day 28, all rats performed the Morris water maze test, consisting of four phases： space navigation, probe test, working memory test, and visual cue test. MAIN OUTCOME MEASURES： Place navigation in the Morris water maze was used to evaluate spatial learning and memory, probe trials for spatial reference memory, working memory test for spatial working memory, and visual cue test for non-spatial cognitive function. Perkin-Elmer Model 300 Atomic Absorption Spectrometer was utilized to determine blood lead levels in rats. RESULTS： （1） In the working memory test, the time to reach the platform remained unchanged between the control and lead exposure groups （F（1,1） = 0.007, P = 0.935）. A visible decrease in escape latencies was observed in each group （P = 0.028）. However, there was no significant difference between the two groups （F（1,1） = 1.869, P = 0.193）. The working memory probe test demonstrated no change between the two groups in the time spent in the target quadrant during the working memory probe test （F（1,1） = 1.869, P = 0.193）. However, by day 4, differences were observed in the working memory test （P 〈 0.01）. （2） Multivariate repetitive measure and ANOVA in place navigation presented no significant difference between the two groups （F（1,1） = 0.579, P = 0.459）. （3） Spatial probe test demonstrated that the time to reach the platform was significantly different between the two groups （F（1,1） = 4.587, P = 0.048）, and one-way ANOVA showed no significant difference in swimming speed between the two groups （F（1,1） = 1.528, P = 0.237）. （4） In the visual cue test, all rats reached the platform within 15 seconds, with no significant difference （F（1,1） = 0.579, P = 0.459）. （5） During experimentation, all rats increased in body mass, but there was no difference between the two groups （F（1,1） = 0.05, P = 0.943）. At day 28 of 0.05% lead exposure, the blood lead level was 29.72 μg/L in the lead exposure group and 5.86 μg/L in the control group （P 〈 0.01）. CONCLUSION： The present results revealed low-level lead exposure significantly impaired spatial reference memory and spatial working memory, but had no effect on spatial learning.
文摘Editor’s Note:After becoming theleading force in CDMAequipment manufacturingin China, ZTE rolled outits self-developed WCD-MA products that at-tracted much expert at-tention in the MTNETsecond phase single sys- tem testing completed inJune 2003. Thefollowing are the remarks of Ye Weimin,ZTE’s vice president, on ZTE’s strate-gies, advantages and achievements inthe development of WCDMA products.
基金This project is supported by National Natural Science Foundation of China (No.70372062, No.70572044)Program for New Century Excellent Talents in University of China (No.NCET-04-0240).
文摘Firstly an overview of the potential impact on work-in-process （WIP） and lead time is provided when transfer lot sizes are undifferentiated from processing lot sizes. Simple performance examples are compared to those from a shop with one-piece transfer lots. Next, a mathematical programming model for minimizing lead time in the mixed-model job shop is presented, in which one-piece transfer lots are used. Key factors affecting lead time are found by analyzing the sum of the longest setup time of individual items among the shared processes （SLST） and the longest processing time of individual items among processes （LPT）. And lead time can be minimized by cutting down the SLST and LPT. Reduction of the SLST is described as a traveling salesman problem （TSP）, and the minimum of the SLST is solved through job shop scheduling. Removing the bottleneck and leveling the production line optimize the LPT. If the number of items produced is small, the routings are relatively short, and items and facilities are changed infrequently, the optimal schedule will remain valid. Finally a brief example serves to illustrate the method.
文摘Children and adults are often exposed to lead in homes as a result of deteriorating lead-based paint surfaces and any disturbance to those surfaces. There are a number of laws, regulations, standards and guidance documents in place aimed at minimization of lead dust contamination following renovation and repair activities. These laws and regulations are oftentimes confusing and conflicting for the maintenance contractor who has limited time and resources for researching the right and appropriate course of action. This paper provides a comprehensive review and discussion of the lead laws, regulations, standards and guidelines for contractors.
文摘Painting contractors have struggled with implementation and assessment of lead exposure controls leading to persistently elevated blood lead levels in this high-risk group of workers. The objective of this study was to assess the intensity of lead exposures based on commonly used air velocities inside field containment structures during abrasive blasting and vacuuming. Exposures were assessed over 14 days from April to July 2021 at a tainter gate and bridge lead paint removal project. Personal air samples, skin wipes, air velocity readings, and blood lead samples were collected. The geometric mean (GM) lead exposure for abrasive blasters and vacuumers was ≥4 × the OSHA Lead Permissible Exposure Limit (PEL) of 50 μg/m<sup>3</sup>. There was high variability in the personal lead exposures (Geometric standard deviation (GSD) 4.0 - 5.0). The GM hand wipe exposures exceeded a Dermal PEL of 500 μg/wipe (abrasive blaster 564 μg/wipe and vacuumer 754 μg/wipe). Residual lead was measured on workers’ hands in 67% of the post hand washing samples. Air velocities measured inside of the field containments ranged from 107 feet per minute to 229 feet per minute. The effect of air velocity on the concentration of lead on workers’ hands after work (F = 0.58, p = 0.35) and airborne lead concentration was not significant (F = 0.36, p = 0.48). Six of the eight workers’ blood lead levels increased after exposure to lead. There was a non-statistically significant relationship between lead remaining on workers’ hands after handwashing and an increase in blood lead level. This is the first study that assessed both ventilation flow rates used in the industrial painting industry and measurements of airborne and dermal (hands) lead exposures. For the projects evaluated, the collected exposure data indicate that air velocities frequently used in the industrial painting industry to ventilate field containment structures did not tend to prevent an increase in worker blood lead and were ineffective for adequately controlling elevated concentrations of airborne lead and preventing contact with workers’ hands.
文摘Leaded brass alloys used progressively in many applications such as gas valves production owing to their excellent machinability, corrosion resistance and some other specifications. However, the production processes of these alloys involve some problems appearing in the last activities of production as a result of cumulative defects of previous production processes. Therefore, the current investigation studies the effect of process parameters during casting, hot extrusion and cold drawing production stages of CuZn40Pb2 leaded brass alloy on the mechanical properties. Starting with casting process, two types of charges were used. The first charge consists of 100% recycles while the second contains 30% of pure materials such as Cu, Zn and Pb in addition to the recycles. For each production stage, alloy hardness, micro-hardness, ultimate tensile strength and elongation were examined. The results illustrated that high hardness values are obtained during casting process due to some impurities such as iron and the effect of cooling rate through solidification. The hardness values decrease during extrusion process and then rise again by cold drawing for the charge of 30% pure materials. Micro-hardness values for the fractured tensile test samples appeared higher than others due to work hardening effect. The best mechanical properties as ultimate tensile strength of CuZn40Pb2 alloy products are appeared into cold forming samples with the 30% pure material added.
