Metallogeny of the Baiyangping Lead-Zinc Polymetallic Ore Concentration Area, Northern Lanping Basin of Yunnan Province, China

The Lanping Basin in the Nujiang-Lancangjiang-Jinshajiang （the Sanjiang） area of northeastern margin of the Tibetan Plateau is an important part of eastern Tethyan metallogenic domain. This basin hosts a number of large unique sediment-hosted Pb-Zn polymetallic deposits or ore districts, such as the Baiyangping ore concentration area which is one of the representative ore district. The Baiyangping ore concentration area can be divided into the east and west ore belts, which were formed in a folded tectogene of the India-Asia continental coUisional setting and was controlled by a large reverse fault. Field observations reveal that the Mesozoic and Cenozoic sedimentary strata were outcropped in the mining area, and that the orebodies are obviously controlled by faults and hosted in sandstone and carbonate rocks. However, the oreforming elements in the east ore belt are mainly Pb-Zn -Sr-Ag, while Pb-Zn-Ag-Cu-Co elements are dominant in the west ore belt. Comparative analysis of the C-O-Sr-S-Pb isotopic compositions suggest that both ore belts had a homogeneous carbon source, and the carbon in hydrothermal calcite is derived from the dissolution of carbonate rock strata; the ore- forming fluids were originated from formation water and precipitate water, which belonged to basin brine fluid system; sulfur was from organic thermal chemical sulfate reduction and biological sulfate reduction; the metal mineralization material was from sedimentary strata and basement, but the difference of the material source of the basement and the strata and the superimposed mineralization of the west ore belt resulted in the difference of metallogenic elements between the eastern and western metallogenic belts. The Pb-Zn mineralization age of both ore belts was contemporary and formed in the same metaliogenetic event. Both thrust formed at the same time and occurred at the Early Oligocene, which is consistent with the age constrained by field geological relationship.

Study on experiment and mechanism of thermal dissolved sulfuration of low grade lead-zinc oxide ore in lanpin

The thermal dissolved sulfuration technology is brought forward and performed based on the characteristic of low grade lead-zinc oxide ore in lanpin. Using sulfur as the sulphidizing agent in the experiment, the oxides in the sandstone and ignimbrite are changed into sulfides. The disproportionation reaction of sulfur in a solution is confirmed as 4S＋3H2O=2S^2-＋S2O3^2--＋6H^＋. The dynamics process is studied and the first-order reaction rate equation -1n（1-a）=ktt is obtained. The effects of the reactive products, stirring speed, dosage of sulfuration agent, value of pH and sulphidizing temperature on the sulfuration of oxide ore are investigated. The results indicate that the reactive apparent activation energy is 100.8 kJ/mol and the sulfuration ratio of lead-zinc oxide ore reaches 60% under the conditions of pH 5.9-7.5, the sulfuration temperature of 130 ℃, sulfuration time of 180 min and the stirring speed of 800 r/min.

Recycle of Wastewater from Lead-Zinc Sulfide Ore Flo-tation Process by Ozone/BAC Technology

Lead-zinc sulphide ore contains lead sulphide (galena), and zinc sulphide (sphalerite). In the first flotation stage, galena is rendered hydrophobic with an organic collector such as xanthate, while sphalerite is kept from floating by depressants, and in the second flotation stage, activator was used to activated zinc flotation. Since the organic regent used are different in the two flotation stage, wastewater from the second zinc flotation stage can’t be directly recycled to the first lead flotation stage. Wastewater from flotation process for concentrating lead-zinc sulphide ore often containing organic compounds such as diethyldithiocarbamate(DDTC), xanthate, terpenic oil(2# oil) and thionocarbamate esters (Z-200), are environmentally hazardous. Their removal from contaminated water and the reuse of the water is one of the main challenges facing lead-zinc sulphide ore processing plants. In this study, synthetic wastewater containing DDTC, xanthate, 2# oil and Z-200 at concentrations ranging from 21 to 42 mg/L was fed into an Ozone/Biological activated carbon (BAC) reactor. Analyses of the effluent indicated a chemical oxygen demand (COD) removal over 86.21% and Total organic carbon (TOC) removal over 90.00% were achieved under Hydraulic retention time (HRT) of 4h and O3 feeding concentration of 33.3mg/L. The effluent was further recycled to the lab scale lead concentrating process and no significant difference was found in compare with fresh water. Furthermore, lead-zinc sulphide mineral concentrating process was carried out at lab scale. The produced wastewater was treated by Ozone/BAC reactor at O3 feeding concentration of 16.7mg/L and HRT of 4h. The effluent analysis showed that TOC removal was 74.58%. This effluent was recycled to the lab scale lead-zinc sulphide mineral concentrating process and the recovery of lead was not affected. The results showed that by using Ozone/BAC technology, the lead-zinc sulphide mineral processing wastewater could be recycled.

Application of Tectono Geochemical Study in Deep Concealed Ore Body Exploration--As the Huize Super-Large Lead-Zinc Deposit an exemple

1 Geological Background of Minerlization or Geologic Setting The northeast of Yunnan1 Pb-Zn-Ag-Ge polymetallic ore district is an important part of the southwestern margin of the Yangtze block Sichuan-Yunnan-Guizhou

Isotope Geochemistry of the Xinchang -Yongjia Silver (Lead-Zinc)Ore Belt in Eastern Zhejiang Province

In the Xinchang-Yongjia silver (lead-zinc) ore belt, there mainly occur the large to medium-sized Haoshi, Bamao, Dalingkou and Wubu silver deposits or silver-bearing lead-zinc deposits. On the basis of researches on these typical deposits, the mechanism of leaching-drawing mineralization of Mesozoic geothermal water and the related model are put forward in this paper in the light of the time interval between rock and formation ages as well as hydrogen, oxygen, sulphur and lead isotope geochemical characteristics. The major metallogenic process occurred in volcanic rock layers. The ore-forming fluids are geothermal water coming from meteoric water and circulating at shallow layers. This geothermal water leached and absorbed ore-forming materials from its country rocks during its flowing (such metallogenic elements as silver, lead-zinc and sulphur mainly came from consolidated volcanic rocks), leading to the formation of meso - epithermal silver deposits.

Application of Audio-Magnetotelluric Method for Exploration the Concealed Ore-Bodies in Yuele Lead-Zinc Ore Feild, Daguan County, NE Yunnan Province, China

The results of recent mineral exploration in the Yuele lead-zinc mining area of Daguan County, northeastern Yunnan province, showed that there are much early Paleozoic strata under thick late Paleozoic strata in northeastern Yunnan province, where developed some hidden salt structures (SSs), often with lead-zinc polymetallic mineralization varying degrees along the tension torsional fault (belts) or fracture (joint). The ore-bodies belong to the epigenetic hydrothermal filling vein-type deposit, and the prospecting potential is great. In this area, the superficial mineralization information displayed clear, but the deep mineralization is unknown, so the exploration work is restricted. The audio-megnetotelluric (AMT) surveying is an advantageous method to characterize the size, resistivity and skin depth of the polarizable mineral deposit concealed beneath thick overburden. This paper presents the surveying results using AMT method to evaluate the concealed lead-zinc mineralization in Yuele lead-zinc ore field, Daguancounty, NE Yunnan province, China. After comparing the interpretation result of AMT surveying data with the geological data and the drilling data, it is found that there is some distinct difference in resistivity and polarizable between ore-bodies hosted strata, upper strata and gypsum strata. The results show that AMT method is helpful to identify lead-zinc mineralization under this geological condition.

An experimental study on metal precipitation driven by fluid mixing: implications for genesis of carbonate-hosted lead–zinc ore deposits

A type of carbonate-hosted lead–zinc(Pb–Zn)ore deposits, known as Mississippi Valley Type(MVT)deposits, constitutes an important category of lead–zinc ore deposits. Previous studies proposed a fluid-mixing model to account for metal precipitation mechanism of the MVT ore deposits, in which fluids with metal-chloride complexes happen to mix with fluids with reduced sulfur, producing metal sulfide deposition. In this hypothesis, however, the detailed chemical kinetic process of mixing reactions, and especially the controlling factors on the metal precipitation are not yet clearly stated. In this paper, a series of mixing experiments under ambient temperature and pressure conditions were conducted to simulate the fluid mixing process, by titrating the metal-chloride solutions, doping withor without dolomite, and using NaHS solution. Experimental results, combined with the thermodynamic calculations, suggest that H_2S, rather than HS^-or S^(2-),dominated the reactions of Pb and/or Zn precipitation during the fluid mixing process, in which metal precipitation was influenced by the stability of metal complexes and the pH. Given the constant concentrations of metal and total S in fluids, the pH was a primary factor controlling the Pb and/or Zn metal precipitation. This is because neutralizing or neutralized processes for the ore-forming fluids can cause instabilities of Pb and/or Zn chloride complexes and re-distribution of sulfur species, and thus can facilitate the hydrolysis of Pb and Zn ions and precipitation of sulfides. Therefore, a weakly acidic to neutral fluid environment is most favorable for the precipitation of Pb and Zn sulfides associated with the carbonate-hosted Pb–Zn deposits.

A Preliminary Study on Fluid Inclusions and Mineralization of Xitieshan Sedimentary-Exhalative (SEDEX) Lead-Zinc Deposit

The Xitieshan lead-zinc deposit is located at the northern margin of the Qaidam Basin, Qinghai Province, China, and had developed a complete marine sedimentary-exhalative system. Our preliminary study of ore-forming fluids shows that fluid inclusions in quartz from altered stockwork rocks that represent the pipe facies have a wide range of temperature and salinity. The intense fluid activities are characteristics of the pipe facies of the exhalative system. Fluid inclusions in carbonates near the unstratified ore bodies hosted in the thick-bedded marble which represents vent-proximal facies are large in size and have moderate to high temperatures. They represent unerupted sub-seafloor fluid activity. Fluids in altered stockwork rocks and carbonates have similar H20-NaCI-CO2 system, both belonging to the sedimentary-exhalative system. The fluids migrate from the pipe facies to the unstratified ore bodies. Boiling of the fluids causes the separation of CO2 vapor and liquid H2O. When the fluids migrate into the unconsolidated thick-bedded marble, the escape of CO2, decreasing temperature and pressure as well as some involvement of seawater into the fluids result in the unmixing of fluids with high and low salinity and deposition of ore-forming materials. The two unmixed fluids were trapped in unconsolidated carbonates and the ore-forming materials were deposited in the unconsolidated carbonates to form the sedimentary-exhalative type unstratified ore bodies. The oreforming temperature of unstratified ore bodies is up to high temperature indicating that there is a huge ore-forming potential in its deep.

The Processing Mineralogy for Lead and Zinc Oxide Ore in Sichuan

Using variety of modern testing methods, the processing mineralogical characteristics for a lead and zinc oxide ore in Sichuan were studied systematically. The chemical analysis result shows that the lead and zinc oxide content exceeding the minimum industrial grade and iron ore, total iron content reaches a minimum industrial grade and associated with gold and silver; The mineralogical analysis result shows that lead and zinc mineral composition and configuration are very complexity. The zinc minerals and zinciferous minerals are sphalerite, hemimorphite, Smithsonite, Hydrozincite, zinc chlorite, limonite, zinc dolomite and zincocalcite; lead minerals and plumbiferous minerals are mainly galena, cerussite, anglesite, limonite and Coronadite; The minerals disseminated grain size are very fine and mineral dissemination characteristics are very complex ; expected theoretical recoveries for lead and zinc were 72% and 67% respectively. The results of this study provide basic data and theoretical basis for ore dressing.

Zinc, copper, and strontium isotopic variability in the Baiyangping Cu–Pb–Zn–Ag polymetallic ore field, Lanping Basin, Southwest China

The Baiyangping Cu-Ag polymetallic ore district is located in the northern part of the Lanping-Simao foreland fold belt,between the Jinshajiang-Ailaoshan and Lancangjiang faults,and the deposit can be divided into eastern and western ore zones.Based upon microscope observation of ore minerals and analysis of zinc,copper,and strontium isotope composition,we conclude that:(1)the zinc isotopic compositions of sphalerite from the eastern and western ore belt of the Baiyangping polymetallic ore deposits are enriched in both the heavy(-0.09‰ to+0.15‰) and light(-0.19‰ to-0.01‰)zinc isotopes.Rayleigh fractionation is likely the additional factor controlling the observed temporal and spatial variations in zinc isotopes in the two studied ore zones.The zinc isotopic composition in the Baiyangping polymetallic Pb-Zn deposits may have the same fractionation as that of magmatic-hydrothermal,VHMS,SEDEX,and MVT deposits,as demonstrated by geological and other geochemical evidence;(2) the range of δ^(65)Cu in massive tetrahedrite is from-0.06‰ to+0.12 ‰ that relates to the early stages of ore-formation,which are higher than that of venial chalcopyrite(from-0.72‰ to-0.07‰)formed at a late ore-forming stage in the western ore belt.Different ore-forming stages and alteration or leaching processes are likely the main factors controlling the observed variations in copper isotopes in the western ore zone;(3) the ^(87)Sr/^(86)Sr value of hydrothermal calcite in eastern(0.7080-0.7093) and western(0.7085-0.7113) ore belt suggested that mineralization of early calcite,with^(87)Sr/^(86)Sr values much higher than in ancient Late Triassic seawater,may be related to recrystallization from a radiogenic Sr-rich or silicifying fluid,either from the strata that the ore-forming fluid flows through or from other fluids.

A STUDY ON SILICON AND OXYGEN ISOTOPE GEOCHEMISTRY OF SOME LEAD-ZINC ORE DEPOSITS IN CHINA

Silicon is one of the most abundant elements in rocks and minerals, so there is a possibility of using silicon isotope to study a series of geological problems on mineral deposits, such as the origin of silicon and genesis of deposits. However, no research work has been reported in this field so far. Since the 1950s, silicon isotope variations in nature have been studied,

Spatial and Temporal Distribution of Au and Pb-Zn Mineralization:Phenomenon,Mechanism and Implication

In the 1990s, some median-large gold deposits have been discovered in several lead-zinc metallogenetic belts (e.g. the Qinling lead-zinc metallogenetic belt, Shanxi Province and Gansu Province and the Qingchengzi lead-zinc ore field, Liaoning Province) in China. Gold deposits and lead-zinc deposits spatially co-exist in the same tectonic setting; lead-zinc orebodies are commonly located below gold ore bodies. The host rocks of lead-zinc ore-bodies are conformably overlain by those of gold ore bodies. The age of gold mineralization is obviously younger than that of lead-zinc mineralization. Preliminary geochemical research has demonstrated the following: lead-zinc mineralization took place in a marine sedimentary-exhalative system, which had the characteristics of a high fluid/rock ratio, a high salinity and a high halide activity; meanwhile, most of gold was transported into the low-temperature hydrothermal plume and primarily enriched in sediments. During later (magmatism-) metamorphism- tectonism, gold was remobilized and transported into the metamorphic fluid which had the characteristics of medium- high temperatures, a low fluid/rock ratio and a low activity of halide, and precipitated at a favourable structural site. Therefore, the co-existence of gold and lead-zinc deposits and the separation of gold from lead-zinc result from the differences of chemical composition and circulation of ore fluids in the same tectonic unit. This phenomenon can be used as an important criterion in exploration.

Effect of Mineral Processing Wastewater on Electrochemistry of Galena

Electrochemical technology was introduced to study the floatability of galena in some wastewater samples from different processes of mineral processing plant in Fankou Lead-Zinc Mine. It is shown that the residual collector molecules in the wastewater from the thickening of lead and zinc concentrates can benefit the formation of lead xanthanate onto the surface of galena, yet, some special chemical components in the wastewater from zinc tailings and effluent may induce some surface reactions on galena, and herewith the direct reuse of this water may bring disadvantageous influence on galena flotation.