The use of lithium-sulfur batteries under high sulfur loading and low electrolyte concentrations is severely restricted by the detrimental shuttling behavior of polysulfides and the sluggish kinetics in redox processe...The use of lithium-sulfur batteries under high sulfur loading and low electrolyte concentrations is severely restricted by the detrimental shuttling behavior of polysulfides and the sluggish kinetics in redox processes.Two-dimensional(2D)few layered black phosphorus with fully exposed atoms and high sulfur affinity can be potential lithium-sulfur battery electrocatalysts,which,however,have limitations of restricted catalytic activity and poor electrochemical/chemical stability.To resolve these issues,we developed a multifunctional metal-free catalyst by covalently bonding few layered black phosphorus nanosheets with nitrogen-doped carbon-coated multiwalled carbon nanotubes(denoted c-FBP-NC).The experimental characterizations and theoretical calculations show that the formed polarized P-N covalent bonds in c-FBP-NC can efficiently regulate electron transfer from NC to FBP and significantly promote the capture and catalysis of lithium polysulfides,thus alleviating the shuttle effect.Meanwhile,the robust 1D-2D interwoven structure with large surface area and high porosity allows strong physical confinement and fast mass transfer.Impressively,with c-FBP-NC as the sulfur host,the battery shows a high areal capacity of 7.69 mAh cm^(−2) under high sulfur loading of 8.74 mg cm^(−2) and a low electrolyte/sulfur ratio of 5.7μL mg^(−1).Moreover,the assembled pouch cell with sulfur loading of 4 mg cm^(−2) and an electrolyte/sulfur ratio of 3.5μL mg^(−1) shows good rate capability and outstanding cyclability.This work proposes an interfacial and electronic structure engineering strategy for fast and durable sulfur electrochemistry,demonstrating great potential in lithium-sulfur batteries.展开更多
The effects of nano-CaO contents on the microstructure,mechanical properties and corrosion resistance of lean Mg-1Zn alloy were investigated.The results showed that the addition of nano-CaO significantly refined the g...The effects of nano-CaO contents on the microstructure,mechanical properties and corrosion resistance of lean Mg-1Zn alloy were investigated.The results showed that the addition of nano-CaO significantly refined the grain size and improved mechanical properties of the Mg-1Zn alloy.At the same time,CaO reacted with molten Mg in situ to form nano-MgO,whose corrosion product in SBF solution was the same with the degradation product of Mg matrix,resulting in the enhanced compactness of the Mg(OH)_(2) layer and reduced corrosion rate of matrix.The Mg-1Zn alloy had lower corrosion resistance due to excessively large grain size and shedding of corrosion products.The composite with 0.5 wt.%CaO had the best corrosion resistance with a weight loss of 9.875 mg·y^(-1)·mm^(-2)due to the small number of Ca_(2)Mg_(6)Zn_(3) phase and suitable grain size.While for composites with high content of CaO(0.7 wt.%and 1.0 wt.%),they had lower corrosion resistance due to the coexistence of large number of Ca_(2)Mg_(6)Zn_(3) and Mg_(2)Ca at grain boundaries,especially for 1.0 wt.%CaO composite,resulting from the strong micro-galvanic corrosion.展开更多
Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology...Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology laboratory. Using the sigma metric, this study assessed the performance of the Biochemistry analytical system of a medical biology laboratory in Côte d'Ivoire. Methods: Six Sigma methodology was applied to 3 analytes (alanine aminotransferase, glucose and creatinine). Performance indicators such as measurement imprecision and bias were determined based on the results of internal and external quality controls. The sigma number was calculated using the total allowable error values proposed by Ricos et al. Results: For both control levels, ALT had a sigma number greater than 6 (7.6 for normal control and 7.9 for pathological control). However, low sigma numbers, less than or equal to 2 for creatinine (1.4 for normal control and 2 for pathological control) and less than 1 for glucose were found. Conclusion: This study revealed good analytical performance of ALT from the point of view of 6 sigma analysis. However, modifications to the overall quality control procedure for glucose and creatinine are needed to improve their analytical performance. The study should be extended to the entire laboratory’s analytes in order to modify the strategies of quality control procedures based on metric analysis for an overall improvement in analytical performance.展开更多
BACKGROUND A new nomenclature consensus has emerged for liver diseases that were previously known as non-alcoholic fatty liver disease(NAFLD)and metabolic dysfunction-associated fatty liver disease(MAFLD).They are now...BACKGROUND A new nomenclature consensus has emerged for liver diseases that were previously known as non-alcoholic fatty liver disease(NAFLD)and metabolic dysfunction-associated fatty liver disease(MAFLD).They are now defined as metabolic dysfunction-associated steatotic liver disease(MASLD),which includes cardiometabolic criteria in adults.This condition,extensively studied in obese or overweight patients,constitutes around 30%of the population,with a steady increase worldwide.Lean patients account for approximately 10%-15%of the MASLD population.However,the pathogenesis is complex and is not well understood.AIM To systematically review the literature on the diagnosis,pathogenesis,characteristics,and prognosis in lean MASLD patients and provide an interpretation of these new criteria.METHODS We conducted a comprehensive database search on PubMed and Google Scholar between January 2012 and September 2023,specifically focusing on lean NAFLD,MAFLD,or MASLD patients.We include original articles with patients aged 18 years or older,with a lean body mass index categorized according to the World Health Organization criteria,using a cutoff of 25 kg/m2 for the general population and 23 kg/m2 for the Asian population.RESULTS We include 85 studies in our analysis.Our findings revealed that,for lean NAFLD patients,the prevalence rate varied widely,ranging from 3.8%to 34.1%.The precise pathogenesis mechanism remained elusive,with associations found in genetic variants,epigenetic modifications,and adaptative metabolic response.Common risk factors included metabolic syndrome,hypertension,and type 2 diabetes mellitus,but their prevalence varied based on the comparison group involving lean patients.Regarding non-invasive tools,Fibrosis-4 index outperformed the NAFLD fibrosis score in lean patients.Lifestyle modifications aided in reducing hepatic steatosis and improving cardiometabolic profiles,with some medications showing efficacy to a lesser extent.However,lean NAFLD patients exhibited a worse prognosis compared to the obese or overweight counterpart.CONCLUSION MASLD is a complex disease comprising epigenetic,genetic,and metabolic factors in its pathogenesis.Results vary across populations,gender,and age.Limited data exists on clinical practice guidelines for lean patients.Future studies employing this new nomenclature can contribute to standardizing and generalizing results among lean patients with steatotic liver disease.展开更多
基金Jiangsu Provincial Department of Science and Technology,Grant/Award Number:BK20201190Fundamental Research Funds for“Young Talent Support Plan”of Xi'an Jiaotong University,Grant/Award Number:HG6J003+1 种基金“1000-Plan program”of Shaanxi Province and the Velux Foundations through the research center V-Sustain,Grant/Award Number:9455National Key R&D Program of China,。
文摘The use of lithium-sulfur batteries under high sulfur loading and low electrolyte concentrations is severely restricted by the detrimental shuttling behavior of polysulfides and the sluggish kinetics in redox processes.Two-dimensional(2D)few layered black phosphorus with fully exposed atoms and high sulfur affinity can be potential lithium-sulfur battery electrocatalysts,which,however,have limitations of restricted catalytic activity and poor electrochemical/chemical stability.To resolve these issues,we developed a multifunctional metal-free catalyst by covalently bonding few layered black phosphorus nanosheets with nitrogen-doped carbon-coated multiwalled carbon nanotubes(denoted c-FBP-NC).The experimental characterizations and theoretical calculations show that the formed polarized P-N covalent bonds in c-FBP-NC can efficiently regulate electron transfer from NC to FBP and significantly promote the capture and catalysis of lithium polysulfides,thus alleviating the shuttle effect.Meanwhile,the robust 1D-2D interwoven structure with large surface area and high porosity allows strong physical confinement and fast mass transfer.Impressively,with c-FBP-NC as the sulfur host,the battery shows a high areal capacity of 7.69 mAh cm^(−2) under high sulfur loading of 8.74 mg cm^(−2) and a low electrolyte/sulfur ratio of 5.7μL mg^(−1).Moreover,the assembled pouch cell with sulfur loading of 4 mg cm^(−2) and an electrolyte/sulfur ratio of 3.5μL mg^(−1) shows good rate capability and outstanding cyclability.This work proposes an interfacial and electronic structure engineering strategy for fast and durable sulfur electrochemistry,demonstrating great potential in lithium-sulfur batteries.
基金the financial support for this work from the National Natural Science Foundation of China(Nos.52171241,52201301 and 51871166)。
文摘The effects of nano-CaO contents on the microstructure,mechanical properties and corrosion resistance of lean Mg-1Zn alloy were investigated.The results showed that the addition of nano-CaO significantly refined the grain size and improved mechanical properties of the Mg-1Zn alloy.At the same time,CaO reacted with molten Mg in situ to form nano-MgO,whose corrosion product in SBF solution was the same with the degradation product of Mg matrix,resulting in the enhanced compactness of the Mg(OH)_(2) layer and reduced corrosion rate of matrix.The Mg-1Zn alloy had lower corrosion resistance due to excessively large grain size and shedding of corrosion products.The composite with 0.5 wt.%CaO had the best corrosion resistance with a weight loss of 9.875 mg·y^(-1)·mm^(-2)due to the small number of Ca_(2)Mg_(6)Zn_(3) phase and suitable grain size.While for composites with high content of CaO(0.7 wt.%and 1.0 wt.%),they had lower corrosion resistance due to the coexistence of large number of Ca_(2)Mg_(6)Zn_(3) and Mg_(2)Ca at grain boundaries,especially for 1.0 wt.%CaO composite,resulting from the strong micro-galvanic corrosion.
文摘Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology laboratory. Using the sigma metric, this study assessed the performance of the Biochemistry analytical system of a medical biology laboratory in Côte d'Ivoire. Methods: Six Sigma methodology was applied to 3 analytes (alanine aminotransferase, glucose and creatinine). Performance indicators such as measurement imprecision and bias were determined based on the results of internal and external quality controls. The sigma number was calculated using the total allowable error values proposed by Ricos et al. Results: For both control levels, ALT had a sigma number greater than 6 (7.6 for normal control and 7.9 for pathological control). However, low sigma numbers, less than or equal to 2 for creatinine (1.4 for normal control and 2 for pathological control) and less than 1 for glucose were found. Conclusion: This study revealed good analytical performance of ALT from the point of view of 6 sigma analysis. However, modifications to the overall quality control procedure for glucose and creatinine are needed to improve their analytical performance. The study should be extended to the entire laboratory’s analytes in order to modify the strategies of quality control procedures based on metric analysis for an overall improvement in analytical performance.
文摘BACKGROUND A new nomenclature consensus has emerged for liver diseases that were previously known as non-alcoholic fatty liver disease(NAFLD)and metabolic dysfunction-associated fatty liver disease(MAFLD).They are now defined as metabolic dysfunction-associated steatotic liver disease(MASLD),which includes cardiometabolic criteria in adults.This condition,extensively studied in obese or overweight patients,constitutes around 30%of the population,with a steady increase worldwide.Lean patients account for approximately 10%-15%of the MASLD population.However,the pathogenesis is complex and is not well understood.AIM To systematically review the literature on the diagnosis,pathogenesis,characteristics,and prognosis in lean MASLD patients and provide an interpretation of these new criteria.METHODS We conducted a comprehensive database search on PubMed and Google Scholar between January 2012 and September 2023,specifically focusing on lean NAFLD,MAFLD,or MASLD patients.We include original articles with patients aged 18 years or older,with a lean body mass index categorized according to the World Health Organization criteria,using a cutoff of 25 kg/m2 for the general population and 23 kg/m2 for the Asian population.RESULTS We include 85 studies in our analysis.Our findings revealed that,for lean NAFLD patients,the prevalence rate varied widely,ranging from 3.8%to 34.1%.The precise pathogenesis mechanism remained elusive,with associations found in genetic variants,epigenetic modifications,and adaptative metabolic response.Common risk factors included metabolic syndrome,hypertension,and type 2 diabetes mellitus,but their prevalence varied based on the comparison group involving lean patients.Regarding non-invasive tools,Fibrosis-4 index outperformed the NAFLD fibrosis score in lean patients.Lifestyle modifications aided in reducing hepatic steatosis and improving cardiometabolic profiles,with some medications showing efficacy to a lesser extent.However,lean NAFLD patients exhibited a worse prognosis compared to the obese or overweight counterpart.CONCLUSION MASLD is a complex disease comprising epigenetic,genetic,and metabolic factors in its pathogenesis.Results vary across populations,gender,and age.Limited data exists on clinical practice guidelines for lean patients.Future studies employing this new nomenclature can contribute to standardizing and generalizing results among lean patients with steatotic liver disease.
