Comparative Analysis of Equal and Unequal Grounding Grid Configurations by Compression Ratio and Least Square Curve Fitting Techniques

The primary aim of the power system grounding is to safeguard the person and satisfying the performance of the power systemtomaintain reliable operation.With equal conductor spacing grounding grid design,the distribution of the current in the grid is not uniform.Hence,unequal grid conductor span in which grid conductors are concentrated more at the periphery is safer to practice than equal spacing.This paper presents the comparative analysis of two novel techniques that create unequal spacing among the grid conductors:the least-square curve fitting technique and the compression ratio techniquewith equal grid configuration for both square and rectangular grids.Particle Swarm Optimization(PSO)is adopted for finding out one optimal feasible solution among many feasible solutions of equal grid configuration for both square and rectangular grids.Comparative analysis is also carried out between square and rectangular grids using the least square curve fitting technique as it results in only one unequal grid configuration.Simulation results are obtained by theMATLAB software developed.Percentage of improvement in ground potential rise,step voltage,touch voltage,and grid resistancewith variation in compression ratios are plotted.

Least square fitting of low resolution gamma ray spectra with cubic B-spline basis functions

In this paper, the least square fitting method with the cubic B-spline basis lunctions is derived to reduce the influence of statistical fluctuations in the gamma ray spectra. The derived procedure is simple and automatic. The results show that this method is better than the convolution method with a sufficient reduction of statistical fluctuation.

Boundary Information Extraction in Industry Inspection

Edge processing of binary image has been one of the most fundamental issues in the area of computer vision. It has great application in industrial inspection. This paper presents a robust ‘corner feature extraction' algorithm which extracts corner features of binary image without any assumptions and constraints. By using this algorithm, the optimal corner features are extracted to characterize the image. After corner features are obtained, a novel approach is proposed to acquire the boundary information, which is based on the least square fitting method. We show its efficiency with some test images.

A full-dimensional analytical potential energy surface for the F+CH_4→HF+CH_3 reaction

A full-dimensional analytical potential energy surface （APES） for the F ＋ CH4 →HF ＋ CH3 reaction is developed based on 7127 ab initio energy points at the unrestricted coupled-cluster with single, double, and perturbative triple excitations. The correlation-consistent polarized triple-split valence basis set is used. The APES is represented with a many-body expansion containing 239 parameters determined by the least square fitting method. The two-body terms of the APES are fitted by potential energy curves with multi-reference configuration interaction, which can describe the diatomic molecules （CH, H2, HF, and CF） accurately. It is found that the APES can reproduce the geometry and vibrational frequencies of the saddle point better than those available in the literature. The rate constants based on the present APES support the experimental results of Moore et al. [Int. J. Chem. Kin. 26, 813 （1994）]. The analytical first-order derivation of energy is also provided, making the present APES convenient and efficient for investigating the title reaction with quasiclassical trajectory calculations.

Pattern synthesis optimization of 3-D ODAR based on improved GA using LSFE method

Pattern synthesis in 3-D opportunistic digital array radar(ODAR) becomes complex when a multitude of antennas are considered to be randomly distributed in a three dimensional space.In order to obtain an optimal pattern,several freedoms must be constrained.A new pattern synthesis approach based on the improved genetic algorithm(GA) using the least square fitness estimation(LSFE) method is proposed.Parameters optimized by this method include antenna locations,stimulus states and phase weights.The new algorithm demonstrates that the fitness variation tendency of GA can be effectively predicted after several "eras" by the LSFE method.It is shown that by comparing the variation of LSFE curve slope,the GA operator can be adaptively modified to avoid premature convergence of the algorithm.The validity of the algorithm is verified using computer implementation.

Research on a Reliability Calculating Model Based on Wear Data

Using various mathematical statistical methods and technology, this paper researches the methods and steps of building a statistical model of wearing rules and reliability models by researching on the wear measure data of products. This method has been verified the availability through actual example modeling, and provides a new method for products' reliability modeling.

Automatic calibration method of voxel size for cone-beam 3D-CT scanning system

For a cone-beam three-dimensional computed tomography （3D-CT） scanning system, voxel size is an important indicator to guarantee the accuracy of data analysis and feature measurement based on 3D-CT images. Meanwhile, the voxel size changes with the movement of the rotary stage along X-ray direction. In order to realize the automatic calibration of the voxel size, a new and easily-implemented method is proposed. According to this method, several projections of a spherical phantom are captured at different imaging positions and the corresponding voxel size values are calculated by non-linear least-square fitting. Through these interpolation values, a linear equation is obtained that reflects the relationship between the voxel size and the rotary stage translation distance from its nominal zero position. Finally, the linear equation is imported into the calibration module of the 3D-CT scanning system. When the rotary stage is moving along X-ray direction, the accurate value of the voxel size is dynamically exported. The experimental results prove that this method meets the requirements of the actual CT scanning system, and has virtues of easy implementation and high accuracy.