Proposing Adjustments to the Dry Season Inter-Reservoir Operation Rules of the Red River System to Improve Water Use Efficiency of the Reservoirs

The Red-Thai Binh River system is an important water resource to the Northern Delta, serving the development of agriculture, people’s livelihood and other economic sectors through its upstream reservoirs and a system of water abstraction works along the rivers. However, due to the impact of climate change and pressure from socio-economic development, the operation of the reservoir system according to Decision No. 740/QD-TTg was issued on June 17, 2019 by the Prime Minister of Government promulgating the Red-Thai Binh River system inter-reservoir operation rules (Operation rules 740) has some shortcomings that need adjustments for higher water use efficiency, meeting downstream water demand and power generation benefits. Through the results of water balance calculation and analysis of economic benefits from water use scenarios, this research proposed adjustment to the inter-reservoir operation during dry season in the Red River system. The result showed that an average water level of 1.0 - 1.7 m should be maintained at Hanoi during the increased release period.

Least-squares reverse time migration in visco-acoustic media based on symplectic stereo-modeling method

The authors proposed a symplectic stereo-modeling method(SSM)in the Birkhoffian dynam-ics and apply it to the visco-acoustic least-squares reverse time migration(LSRTM).The SSM adopts ste-reo-modeling operator in space and symplectic Runge-Kutta scheme in time,resulting in great ability in suppressing numerical dispersion and long-time computing.These advantages are further confirmed by numerical dispersion analysis,long-time computation test and computational efficiency comparison.After these theoretical analyses and experiments,acoustic and visco-acoustic LSRTM are tested and compared between SSM method and the conventional symplectic method(CSM)using the fault and marmousi models.Meanwhile,dynamic source encoding and exponential decay moving average gradients method are adopted to reduce the computation cost and improve the convergence rate.The imaging results show that LSRTM based on visco-acoustic wave equations effectively takes into account the influence of viscosity can therefore compensate for the amplitude attenuation.Besides,SSM method not only has high numerical accuracy and computational efficiency,but also performs effectively in LSRTM.

Cameroon Climate Predictions Using the SARIMA-LSTM Machine Learning Model: Adjustment of a Climate Model for the Sudano-Sahelian Zone of Cameroon

It is acknowledged today within the scientific community that two types of actions must be considered to limit global warming: mitigation actions by reducing GHG emissions, to contain the rate of global warming, and adaptation actions to adapt societies to Climate Change, to limit losses and damages [1] [2]. As far as adaptation actions are concerned, numerical simulation, due to its results, its costs which require less investment than tests carried out on complex mechanical structures, and its implementation facilities, appears to be a major step in the design and prediction of complex mechanical systems. However, despite the quality of the results obtained, biases and inaccuracies related to the structure of the models do exist. Therefore, there is a need to validate the results of this SARIMA-LSTM-digital learning model adjusted by a matching approach, “calculating-test”, in order to assess the quality of the results and the performance of the model. The methodology consists of exploiting two climatic databases (temperature and precipitation), one of which is in-situ and the other spatial, all derived from grid points. Data from the dot grids are processed and stored in specific formats and, through machine learning approaches, complex mathematical equations are worked out and interconnections within the climate system established. Through this mathematical approach, it is possible to predict the future climate of the Sudano-Sahelian zone of Cameroon and to propose adaptation strategies.

An extended state observer with adjustable bandwidth for measurement noise

In this paper,a bandwidth-adjustable extended state observer(ABESO)is proposed for the systems with measurement noise.It is known that increasing the bandwidth of the observer improves the tracking speed but tolerates noise,which conflicts with observation accuracy.Therefore,we introduce a bandwidth scaling factor such that ABESO is formulated to a 2-degree-of-freedom system.The observer gain is determined and the bandwidth scaling factor adjusts the bandwidth according to the tracking error.When the tracking error decreases,the bandwidth decreases to suppress the noise,otherwise the bandwidth does not change.It is proven that the error dynamics are bounded and converge in finite time.The relationship between the upper bound of the estimation error and the scaling factor is given.When the scaling factor is less than 1,the ABESO has higher estimation accuracy than the linear extended state observer(LESO).Simulations of an uncertain nonlinear system with compound disturbances show that the proposed ABESO can successfully estimate the total disturbance in noisy environments.The mean error of total disturbance of ABESO is 15.28% lower than that of LESO.

Rigidloop Adjustable可调袢钢板治疗踝关节骨折并下胫腓联合损伤

目的比较Rigidloop Adjustable(RLA)可调袢钢板与螺钉治疗踝关节骨折合并下胫腓联合损伤的临床效果。方法回顾性分析2019年9月至2022年5月武汉市第三医院收治的44例踝关节骨折合并下胫腓联合损伤的患者。踝关节骨折行切开复位内固定后,下胫腓联合采用RLA可调袢钢板固定22例,2枚皮质骨螺钉三皮质骨固定22例。应用AOFAS踝与后足功能评分、术侧与健侧踝关节活动度平均差值及术前、术后随访时正位X线片下胫腓间隙(tibiofibular bottom clear space,TBCS)、下胫腓重叠距离(tibiofibular bottom overlap,TBOL)比较两组临床效果。结果患者均获得随访,随访时间12~18个月,平均(16.41±1.66)个月。患者踝关节功能满意,无伤口感染、皮肤激惹等并发症。术后3、6、12个月时,RLA可调袢钢板组双侧踝关节活动度差值均显著小于螺钉组,差异有统计学意义(P<0.05);术后3、6、12个月时,两组的AOFAS评分比较,差异无统计学意义(P>0.05);TBCS、TBOL术前、术后即刻、术后3个月及末次随访时,差异无统计学意义(P>0.05)。结论RLA可调袢钢板和螺钉均可有效固定下胫腓联合,与螺钉固定相比,RLA可调袢钢板组可早期功能锻炼,获得更好的踝关节活动度。

Impact of an official accountability audit on industrial structure adjustment:a case study of environmental regulation in China

As a unique environmental regulation in China,the official accountability audit was piloted in 2014.With a focus on prioritizing the ecological environment,officials in pilot districts have implemented economic construction,adjusted industrial structures,and promoted coordinated development between the economy and environment.The effects of implementation have garnered widespread attention from society.However,there is limited research on the impact of an accountability audit on industrial structure adjustments.Using the“Accountability Audit of Officials for Natural Resource Assets(Trial)”released in 2015 as a quasi-natural experiment,this study collected panel data from 279 cities between 2013 and 2017.It then empirically analyzed the impact mechanism and effects of the accountability audit on industrial structure adjustment using the Propensity Score Matching and Difference-in-Differences model.The research findings indicate that the accountability audit directly impacted industrial structure adjustment,promoting the upgrading of the primary industry to the secondary industry and restricting the development of the tertiary industry.In addition,the audit is beneficial for enterprise entry,but not conducive to technological innovation,and has no significant impact on foreign direct investment.This conclusion fills a gap in the existing research and provides valuable insights for policymakers.

Cross-Cultural Adjustment and Coping:U.S.Students in Taiwan Residents Higher Education

The aim of this study was to investigate the adjustment problems of students from the United States enrolled in universities in the East,specifically in Taiwan,their problems related to cultural adaptation,and the process of adjustment to student life in Taiwan.Under investigation were cultural adjustment and coping skills as these students transitioned from West to East.Qualitative data were collected from interviews with participants and faculty members as well as participant observations.Results indicated that U.S.students found their own ways to acclimate to their new academic setting as well as to social relations,cross-cultural issues,and the linguistic environment in Taiwan to achieve effective adaptation.They made changes in themselves to cope with all situations they encountered.This study provides suggestions for international students abroad in Taiwan,for the Taiwan Residents government,and for universities or colleges in terms of what they should offer to current and future international students.

Optimized CUDA Implementation to Improve the Performance of Bundle Adjustment Algorithm on GPUs

The 3D reconstruction pipeline uses the Bundle Adjustment algorithm to refine the camera and point parameters. The Bundle Adjustment algorithm is a compute-intensive algorithm, and many researchers have improved its performance by implementing the algorithm on GPUs. In the previous research work, “Improving Accuracy and Computational Burden of Bundle Adjustment Algorithm using GPUs,” the authors demonstrated first the Bundle Adjustment algorithmic performance improvement by reducing the mean square error using an additional radial distorting parameter and explicitly computed analytical derivatives and reducing the computational burden of the Bundle Adjustment algorithm using GPUs. The naïve implementation of the CUDA code, a speedup of 10× for the largest dataset of 13,678 cameras, 4,455,747 points, and 28,975,571 projections was achieved. In this paper, we present the optimization of the Bundle Adjustment algorithm CUDA code on GPUs to achieve higher speedup. We propose a new data memory layout for the parameters in the Bundle Adjustment algorithm, resulting in contiguous memory access. We demonstrate that it improves the memory throughput on the GPUs, thereby improving the overall performance. We also demonstrate an increase in the computational throughput of the algorithm by optimizing the CUDA kernels to utilize the GPU resources effectively. A comparative performance study of explicitly computing an algorithm parameter versus using the Jacobians instead is presented. In the previous work, the Bundle Adjustment algorithm failed to converge for certain datasets due to several block matrices of the cameras in the augmented normal equation, resulting in rank-deficient matrices. In this work, we identify the cameras that cause rank-deficient matrices and preprocess the datasets to ensure the convergence of the BA algorithm. Our optimized CUDA implementation achieves convergence of the Bundle Adjustment algorithm in around 22 seconds for the largest dataset compared to 654 seconds for the sequential implementation, resulting in a speedup of 30×. Our optimized CUDA implementation presented in this paper has achieved a 3× speedup for the largest dataset compared to the previous naïve CUDA implementation.

Research on Demand Response Potential of Adjustable Loads in Demand Response Scenarios

To address the issues of limited demand response data,low generalization of demand response potential evaluation,and poor demand response effect,the article proposes a demand response potential feature extraction and prediction model based on data mining and a demand response potential assessment model for adjustable loads in demand response scenarios based on subjective and objective weight analysis.Firstly,based on the demand response process and demand response behavior,obtain demand response characteristics that characterize the process and behavior.Secondly,establish a feature extraction and prediction model based on data mining,including similar day clustering,time series decomposition,redundancy processing,and data prediction.The predicted values of each demand response feature on the response day are obtained.Thirdly,the predicted data of various characteristics on the response day are used as demand response potential evaluation indicators to represent different demand response scenarios and adjustable loads,and a demand response potential evaluation model based on subjective and objective weight allocation is established to calculate the demand response potential of different adjustable loads in different demand response scenarios.Finally,the effectiveness of the method proposed in the article is verified through examples,providing a reference for load aggregators to formulate demand response schemes.

Adjustment of Administrative Divisions and Upgrading of Industrial Structure in Hefei Metropolitan Area:Taking"Partitions of Chaohu"as a Quasi-natural Experiment

Administrative regions are an important environment for the operation of China's market economy.The relevant economic subjects cannot predict the policy of adjustment of administrative divisions and carry out conscious migration behavior,adjustment of administrative divisions can be regarded as a quasi-natural experiment.The three cities of Hefei,Wuhu,and Ma'anshan,which are directly related to the adjustment of the administrative division of Chaohu,are taken as the treatment group,and the seven adjacent cities of Lu'an,Huainan,Chuzhou,Bengbu,Anqing,Chizhou,and Tongling are taken as the control group.Differences-in-Differences method and relevant control variables affecting the upgrading of industrial structure are used to test.The test results show that"Partitions of Chaohu"has a significant industrial structure upgrading effect by promoting the optimization of spatial layout,the cross-regional flow of production factors and the effective management of Chaohu Lake Basin.At the same time,the increase of total retail sales of consumer goods,urban fixed assets investment,public utility expenses in science,education,culture and health,and population plays a significant positive role in promoting the upgrading of industrial structure,while foreign direct investment plays a certain inhibition role in the upgrading of industrial structure.In order to meet the ever-developing space demands and enhance the impact on surrounding areas,the Hefei metropolitan area should be driven by technological innovation,strengthen the integration of industrial chains,improve the business environment and transportation network,and continuously promote the upgrading of industrial structure and the formation and development of new productive forces.

Least-Squares及Galerkin谱元方法求解环形区域内的泊松方程

为研究基于Least-Squares变分及Galerkin变分两种形式的谱元方法的求解特性,推导了极坐标系中采用两种变分方法求解环形区域内Poisson方程时对应的弱解形式,采用Chebyshev多项式构造插值基函数进行空间离散,得到两种谱元方法对应的代数方程组,由此分析了系数矩阵结构的特点。数值计算结果显示:Least-Squares谱元方法为实现方程的降阶而引入新的求解变量,使得代数方程组形式更为复杂,但边界条件的处理比Galerkin谱元方法更为简单;两种谱元方法均能求解极坐标系中的Poisson方程且能获得高精度的数值解,二者绝对误差分布基本一致;固定单元内的插值阶数时,增加单元数可减小数值误差,且表现出代数精度的特点,误差降低速度较慢,而固定单元数时,在一定范围内数值误差随插值阶数的增加而减小的速度更快,表现出谱精度的特点;单元内插值阶数较高时,代数方程组系数矩阵的条件数急剧增多,方程组呈现病态,数值误差增大,这一特点限制了单元内插值阶数的取值。研究内容对深入了解两种谱元方法在极坐标系中求解Poisson方程时的特点、进一步采用相关分裂算法求解实际流动问题具有参考价值。

Improvement of Radar Quantitative Precipitation Estimation Based on Real-Time Adjustments to Z-R Relationships and Inverse Distance Weighting Correction Schemes

The errors in radar quantitative precipitation estimations consist not only of systematic biases caused by random noises but also spatially nonuniform biases in radar rainfall at individual rain-gauge stations. In this study, a real-time adjustment to the radar reflectivity rainfall rates （Z R） relationship scheme and the gauge-corrected, radar-based, estimation scheme with inverse distance weighting interpolation was devel- oped. Based on the characteristics of the two schemes, the two-step correction technique of radar quantitative precipitation estimation is proposed. To minimize the errors between radar quantitative precipitation es- timations and rain gauge observations, a real-time adjustment to the Z R relationship scheme is used to remove systematic bias on the time-domain. The gauge-corrected, radar-based, estimation scheme is then used to eliminate non-uniform errors in space. Based on radar data and rain gauge observations near the Huaihe River, the two-step correction technique was evaluated using two heavy-precipitation events. The results show that the proposed scheme improved not only in the underestimation of rainfall but also reduced the root-mean-square error and the mean relative error of radar-rain gauge pairs.

Adaptability of anticipatory postural adjustments associated with voluntary movement

The control of balance is crucial for efficiently performing most of our daily motor tasks, such as those involving goal-directed arm movements or whole body displacement. The purpose of this article is twofold. Firstly, it is to recall how balance can be maintained despite the different sources of postural perturbation arising during voluntary movement. The importance of the so-called "anticipatory postural adjustments"(APA), taken as a "line of defence" against the destabilizing effect induced by a predicted perturbation, is emphasized. Secondly, it is to report the results of recent studies that questioned the adaptability of APA to various constraints imposed on the postural system. The postural constraints envisaged here are classified into biomechanical(postural stability, superimposition of motor tasks),(neuro) physiological(fatigue), temporal(time pressure) and psychological(fear of falling, emotion). Overall, the results of these studies point out the capacity of the central nervous system(CNS) to adapt the spatio-temporal features of APA to each of theseconstraints. However, it seems that, depending on the constraint, the "priority" of the CNS was focused on postural stability maintenance, on body protection and/or on maintenance of focal movement performance.

Sap flow characteristics and physiological adjustments of two dominant tree species in pure and mixed plantations in the semi-arid Loess Plateau of China

It is essential to understand the water consumption characteristics and physiological adjustments of tree species under drought conditions,as well as the effects of pure and mixed plantations on these characteristics in semi-arid regions.In this study,the normalized sap flow(SFn),leaf water potential,stomatal conductance(gs),and photosynthetic rate(Pr)were monitored for two dominant species,i.e.,Pinus tabuliformis and Hippophae rhamnoides,in both pure and mixed plantations in a semi-arid region of Chinese Loess Plateau.A threshold-delay model showed that the lower rainfall thresholds(RL)for P.tabuliformis and H.rhamnoides in pure plantations were 9.6 and 11.0 mm,respectively,and the time lags(τ)after rainfall were 1.15 and 1.76 d for corresponding species,respectively.The results indicated that P.tabuliformis was more sensitive to rainfall pulse than H.rhamnoides.In addition,strong stomatal control allowed P.tabuliformis to experience low gsand Prin response to drought,while maintaining a high midday leaf water potential(Ψm).However,H.rhamnoides maintained high gsand Prat a lowΨmexpense.Therefore,P.tabuliformis and H.rhamnoides can be considered as isohydric and anisohydric species,respectively.In mixed plantation,the values of RLfor P.tabuliformis and H.rhamnoides were 6.5 and 8.9 mm,respectively;and the values ofτwere 0.86 and 1.61 d for corresponding species,respectively,which implied that mixed afforestation enhanced the rainfall pulse sensitivity for both two species,especially for P.tabuliformis.In addition,mixed afforestation significantly reduced SFn,gs,and Prfor P.tabuliformis(P<0.05),while maintaining a high leaf water potential status.However,no significant effect of mixed afforestation of H.rhamnoides was observed at the expense of leaf water potential status in response to drought.Although inconsistent physiological responses were adopted by these species,the altered water consumption characteristics,especially for P.tabuliformis indicated that the mixed afforestation requires further investigation.

Regularized least-squares migration of simultaneous-source seismic data with adaptive singular spectrum analysis

Simultaneous-source acquisition has been recog- nized as an economic and efficient acquisition method, but the direct imaging of the simultaneous-source data produces migration artifacts because of the interference of adjacent sources. To overcome this problem, we propose the regularized least-squares reverse time migration method （RLSRTM） using the singular spectrum analysis technique that imposes sparseness constraints on the inverted model. Additionally, the difference spectrum theory of singular values is presented so that RLSRTM can be implemented adaptively to eliminate the migration artifacts. With numerical tests on a fiat layer model and a Marmousi model, we validate the superior imaging quality, efficiency and convergence of RLSRTM compared with LSRTM when dealing with simultaneoussource data, incomplete data and noisy data.

BUNDLE ADJUSTMENTS CCD CAMERA CALIBRATION BASED ON COLLI NEARITY EQUATION

The solid template CCD camera calibration method of bundle adjustments basedon collinearity equation is presented considering the characteristics of space large-dimensionon-line measurement. In the method, a more comprehensive camera model is adopted which is based onthe pinhole model extended with distortions corrections. In the process of calibration, calibrationprecision is improved by imaging at different locations in the whole measurement space,multi-imaging at the same location and bundle adjustments optimization. The calibration experimentproves that the calibration method is able to fulfill calibration requirement of CCD camera appliedto vision measurement.

Quantitative energy-dispersive X-ray fluorescence analysis for unknown samples using full-spectrum least-squares regression

The full-spectrum least-squares(FSLS) method is introduced to perform quantitative energy-dispersive X-ray fluorescence analysis for unknown solid samples.Based on the conventional least-squares principle, this spectrum evaluation method is able to obtain the background-corrected and interference-free net peaks, which is significant for quantization analyses. A variety of analytical parameters and functions to describe the features of the fluorescence spectra of pure elements are used and established, such as the mass absorption coefficient, the Gi factor, and fundamental fluorescence formulas. The FSLS iterative program was compiled in the C language. The content of each component should reach the convergence criterion at the end of the calculations. After a basic theory analysis and experimental preparation, 13 national standard soil samples were detected using a spectrometer to test the feasibility of using the algorithm. The results show that the calculated contents of Ti, Fe, Ni, Cu, and Zn have the same changing tendency as the corresponding standard content in the 13 reference samples. Accuracies of 0.35% and 14.03% are obtained, respectively, for Fe and Ti, whose standard concentrations are 8.82% and 0.578%, respectively. However, the calculated results of trace elements (only tens of lg/g) deviate from the standard values. This may be because of measurement accuracy and mutual effects between the elements.

LEAST-SQUARES METHOD-BASED FEATURE FITTING AND EXTRACTION IN REVERSE ENGINEERING

The main purpose of reverse engineering is to convert discrete data pointsinto piecewise smooth, continuous surface models. Before carrying out model reconstruction it issignificant to extract geometric features because the quality of modeling greatly depends on therepresentation of features. Some fitting techniques of natural quadric surfaces with least-squaresmethod are described. And these techniques can be directly used to extract quadric surfaces featuresduring the process of segmentation for point cloud.

Solution of shallow-water equations using least-squares finite-element method

A least-squares finite-element method （LSFEM） for the non-conservative shallow-water equations is presented. The model is capable of handling complex topography, steady and unsteady flows, subcritical and supercritical flows, and flows with smooth and sharp gradient changes. Advantages of the model include： （1） sources terms, such as the bottom slope, surface stresses and bed frictions, can be treated easily without any special treatment; （2） upwind scheme is no needed; （3） a single approximating space can be used for all variables, and its choice of approximating space is not subject to the Ladyzhenskaya-Babuska-Brezzi （LBB） condition; and （4） the resulting system of equations is symmetric and positive-definite （SPD） which can be solved efficiently with the preconditioned conjugate gradient method. The model is verified with flow over a bump, tide induced flow, and dam-break. Computed results are compared with analytic solutions or other numerical results, and show the model is conservative and accurate. The model is then used to simulate flow past a circular cylinder. Important flow charac-teristics, such as variation of water surface around the cylinder and vortex shedding behind the cylinder are investigated. Computed results compare well with experiment data and other numerical results.