One of the key challenges for achieving stable lithium(Li) metal anode is the construction of the rational solid electrolyte interphase(SEI),but its realization still faces enormous challenges.In this work,a robust ar...One of the key challenges for achieving stable lithium(Li) metal anode is the construction of the rational solid electrolyte interphase(SEI),but its realization still faces enormous challenges.In this work,a robust artificial fluorinated hybrid interphase consisting of lithium-bismuth(Li3Bi) alloy and lithium-fluoride(LiF) was designed to regulate Li deposition without Li dendrite growth.The obtained hybrid interphase showed the high Li+diffusion rate(3.5 × 10^(-4)S cm^(-1)),high electron resistivity(9.04 × 10^(4)Ω cm),and high mechanical strength(1348 MPa),thus enabling the uniform Li deposition at the Li/SEI interface.Specifically,Li3Bi alloy,as a superionic conductor,accelerated the Li+transport and stabilized the hybrid interphase.Meanwhile,LiF was identified as a superior electron-blocker to inhibit the electron tunneling from the Li anode into the SEI.As a result,the modified Li anode showed the stable Li plating/stripping behaviors over 1000 cycles even at 20 mA cm^(-2).Moreover,it also enabled the Li(50 μm)‖LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(4.4 mA h cm^(-2)) full cell to achieve an average Coulombic efficiency(CE) of 99.6%and a high-capacity retention of 79.2% after 100 cycles,whereas the bare Li anode only exhibited a low-capacity retention of 8.0%.This work sheds light on the internal mechanism of Li+transport within the hybrid interface and provides an effective approach to stabilize the interface of Li metal anode.展开更多
PbZrO_(3)-based antiferroelectric(AFE)ceramics are promising dielectrics for high-energy-density capacitors due to their reversible phase transitions during charge-discharge cycles.In this work,a new composition serie...PbZrO_(3)-based antiferroelectric(AFE)ceramics are promising dielectrics for high-energy-density capacitors due to their reversible phase transitions during charge-discharge cycles.In this work,a new composition series,[Pb_(0.93-x)La_(0.02)(Li_(1/2)Bi_(1/2))_(x)Sr_(0.04)][Zr_(0.57)Sn_(0.34)Ti_(0.09)]O_(3),with Li^(+)and Bi^(3+)substitution of Pb^(2+)at x=0,0.04,0.08,0.12,0.16 is investigated for the microstructure evolution,ferroelectric(FE)and dielectric properties.It is found that Li^(+) and Bi^(3+) substitution can significantly reduce the sintering temperature and simultaneously enhance the dielectric breakdown strength.An ultrahigh energy efficiency(94.0%)and a large energy density(3.22 J/cm^(3))are achieved in the composition of x=0.12 with a low sintering temperature(1075℃).展开更多
基金supported by the Open Fund of State Key Laboratory of Advanced Forming Technology and Equipment (No. SKL202005)the Major Scientific and Technological Innovation Project of Luoyang,China(No. 2201029A)+1 种基金the National Natural Science Foundation of China (Nos. 51771115, 51775334)the Research Program of SAST-SJTU Joint Research Center of Advanced Spaceflight Technologies,China (No. USCAST2020-14)。
基金supported by the Natural Science Foundation of Henan Province (202300410163)the Innovative Research Team(in Science and Technology) in University of Henan Province(20IRTSTHN016)+1 种基金the Outstanding Talent Introduction Project of University of Electronic Science and Technology of China(08JC00303)the Innovative Research Team of Sichuan Fuhua New Energy High-Tech Co.,Ltd (621006)。
文摘One of the key challenges for achieving stable lithium(Li) metal anode is the construction of the rational solid electrolyte interphase(SEI),but its realization still faces enormous challenges.In this work,a robust artificial fluorinated hybrid interphase consisting of lithium-bismuth(Li3Bi) alloy and lithium-fluoride(LiF) was designed to regulate Li deposition without Li dendrite growth.The obtained hybrid interphase showed the high Li+diffusion rate(3.5 × 10^(-4)S cm^(-1)),high electron resistivity(9.04 × 10^(4)Ω cm),and high mechanical strength(1348 MPa),thus enabling the uniform Li deposition at the Li/SEI interface.Specifically,Li3Bi alloy,as a superionic conductor,accelerated the Li+transport and stabilized the hybrid interphase.Meanwhile,LiF was identified as a superior electron-blocker to inhibit the electron tunneling from the Li anode into the SEI.As a result,the modified Li anode showed the stable Li plating/stripping behaviors over 1000 cycles even at 20 mA cm^(-2).Moreover,it also enabled the Li(50 μm)‖LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(4.4 mA h cm^(-2)) full cell to achieve an average Coulombic efficiency(CE) of 99.6%and a high-capacity retention of 79.2% after 100 cycles,whereas the bare Li anode only exhibited a low-capacity retention of 8.0%.This work sheds light on the internal mechanism of Li+transport within the hybrid interface and provides an effective approach to stabilize the interface of Li metal anode.
基金supported by the U.S.Department of Energy’s Office of Energy Efficiency and Renewable Energy(EERE)under the Advanced Manufacturing Office(AMO)Award Number DEEE0009105.
文摘PbZrO_(3)-based antiferroelectric(AFE)ceramics are promising dielectrics for high-energy-density capacitors due to their reversible phase transitions during charge-discharge cycles.In this work,a new composition series,[Pb_(0.93-x)La_(0.02)(Li_(1/2)Bi_(1/2))_(x)Sr_(0.04)][Zr_(0.57)Sn_(0.34)Ti_(0.09)]O_(3),with Li^(+)and Bi^(3+)substitution of Pb^(2+)at x=0,0.04,0.08,0.12,0.16 is investigated for the microstructure evolution,ferroelectric(FE)and dielectric properties.It is found that Li^(+) and Bi^(3+) substitution can significantly reduce the sintering temperature and simultaneously enhance the dielectric breakdown strength.An ultrahigh energy efficiency(94.0%)and a large energy density(3.22 J/cm^(3))are achieved in the composition of x=0.12 with a low sintering temperature(1075℃).
