Mitigated lattice distortion and oxygen loss of Li-rich layered cathode materials through anion/cation regulation by Ti^(4+)-substitution

Lithium-rich layered cathode material(LLM)can meet the requirement of power lithium-ion energy storage devices due to the great energy density.However,the de/intercalation of Li+will cause the irreversible loss of lattice oxygen and trigger transition metal(TM)ions migrate to Li+vacancies,resulting in capacity decay.Here we brought Ti4+in substitution of TM ions in Li_(1.2)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2),which could stabilize structure and expand the layer spacing of LLM.Moreover,optimized Ti-substitution can regulate the anions and cations of LLM,enhance the interaction with lattice oxygen,increase Ni^(3+) and Co^(3+),and improve Mn^(4+) coordination,improving reversibility of oxygen redox activation,maintaining the stable framework and facilitating the Li^(+) diffusion.Furthermore,we found 5%Ti-substitution sample delivered a high discharge capacity of 244.2 mAh/g at 50 mA/g,an improved cycling stability to 87.3%after 100 cycles and enhanced rate performance.Thereby Ti-substitution gives a new pathway to achieve high reversible cycle retention for LLMs.

Difficulties, strategies, and recent research and development of layered sodium transition metal oxide cathode materials for high-energy sodium-ion batteries

Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devices(PEDs),etc.In recent decades,Lithium-ion batteries(LIBs) have been extensively utilized in largescale energy storage devices owing to their long cycle life and high energy density.However,the high cost and limited availability of Li are the two main obstacles for LIBs.In this regard,sodium-ion batteries(SIBs) are attractive alternatives to LIBs for large-scale energy storage systems because of the abundance and low cost of sodium materials.Cathode is one of the most important components in the battery,which limits cost and performance of a battery.Among the classified cathode structures,layered structure materials have attracted attention because of their high ionic conductivity,fast diffusion rate,and high specific capacity.Here,we present a comprehensive review of the classification of layered structures and the preparation of layered materials.Furthermore,the review article discusses extensively about the issues of the layered materials,namely(1) electrochemical degradation,(2) irreversible structural changes,and(3) structural instability,and also it provides strategies to overcome the issues such as elemental phase composition,a small amount of elemental doping,structural design,and surface alteration for emerging SIBs.In addition,the article discusses about the recent research development on layered unary,binary,ternary,quaternary,quinary,and senary-based O3-and P2-type cathode materials for high-energy SIBs.This review article provides useful information for the development of high-energy layered sodium transition metal oxide P2 and O3-cathode materials for practical SIBs.

Recent progress in Ni-rich layered oxides and related cathode materials for Li-ion cells

Undoubtedly,the enormous progress observed in recent years in the Ni-rich layered cathode materials has been crucial in terms of pushing boundaries of the Li-ion battery(LIB)technology.The achieved improvements in the energy density,cyclability,charging speed,reduced costs,as well as safety and stability,already contribute to the wider adoption of LIBs,which extends nowadays beyond mobile electronics,power tools,and electric vehicles,to the new range of applications,including grid storage solutions.With numerous published papers and broad reviews already available on the subject of Ni-rich oxides,this review focuses more on the most recent progress and new ideas presented in the literature references.The covered topics include doping and composition optimization,advanced coating,concentration gradient and single crystal materials,as well as innovations concerning new electrolytes and their modification,with the application of Ni-rich cathodes in solid-state batteries also discussed.Related cathode materials are briefly mentioned,with the high-entropy approach and zero-strain concept presented as well.A critical overview of the still unresolved issues is given,with perspectives on the further directions of studies and the expected gains provided.

Recent Progress and Regulation Strategies of Layered Materials as Cathode of Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries(ZIBs)have shown great potential in the fields of wearable devices,consumer electronics,and electric vehicles due to their high level of safety,low cost,and multiple electron transfer.The layered cathode materials of ZIBs hold a stable structure during charge and discharge reactions owing to the ultrafast and straightforward(de)intercalation-type storage mechanism of Zn^(2+)ions in their tunable interlayer spacing and their abilities to accommodate other guest ions or molecules.Nevertheless,the challenges of inadequate energy density,dissolution of active materials,uncontrollable byproducts,increased internal pressure,and a large de-solvation penalty have been deemed an obstacle to the development of ZIBs.In this review,recent strategies on the structure regulation of layered materials for aqueous zinc-ion energy storage devices are systematically summarized.Finally,critical science challenges and future outlooks are proposed to guide and promote the development of advanced cathode materials for ZIBs.

Surface-engineering of layered LiNi_(0.815)Co_(0.15)Al_(0.035)O_2 cathode material for high-energy and stable Li-ion batteries

Surface engineering is an effective strategy to restrain the generation of rocksalt NiO phase on surface of layered LiNi0.815Co0.15Al0.035O2（NCA） primary nanoparticles, a representative Ni-rich layered oxides cathode materials. Herein, we demonstrate the kilogram-scale synthesis of few-layer reduced graphene oxide（rGO） conformably coated NCA primary nanoparticles cathode materials by a mechanical wet ball-milling strategy. The lightening rGO coating layer effectively avoids the direct contact of electrolyte and NCA with rapid electrons transfer. As a result, the as-obtained NCA@rGO hybrids with only 1.0 wt% rGO content can deliver a high specific capacity（196 mAh g-1 at 0.2 C） and fast charge/discharge capability（127 mAh g-1 at 5 C）, which is much higher than the corresponding NCA nanoparticles（95 mAh g-1 at 5 C）. Even after100 cycles at 1 C, 91.7% of initial reversible capacity is still maintained. Furthermore, a prismatic pouch cell（240 mAh） is also successfully assembled with the commercial graphite anode.

Thermodynamically Revealing the Essence of Order and Disorder Structures in Layered Cathode Materials

Layered transition metal(TM) oxides are one of the most widely used cathode materials in lithium-ion batteries. The atomic configuration in TM layer of these materials is often known to be random when multiple TM elements co-exist in the layer(e.g. Ni, Co and Mn). By contrast, the configuration tends to be ordered if the elements are Li and Mn. Here, by using special quasi-random structures(SQS) algorithm, the essential reasons of the ordering in a promising Li-rich Mn-based cathode material Li2MnO3 are investigated. The difference of internal energy and entropy between ordered and disordered materials is calculated. As a result, based on the Gibbs free energy, it is found that Li2MnO3 should have an ordered structure in TM layer. In comparison, structures with Ni-Mn ratio of 2:1 are predicted to have a disordered TM layer, because the entropy terms have larger impact on the structural ordering than internal energy terms.

Recent Progress and Prospects of Layered Cathode Materials for Potassium-ion Batteries

Layered materials with two-dimensional ion diffusion channels and fast kinetics are attractive as cathode materials for secondary batteries.However,one main challenge in potassium-ion batteries is the large ion size of K^(+),along with the strong K^(+)-K^(+)electrostatic repulsion.This strong interaction results in initial K deficiency,greater voltage slope,and lower specific capacity between set voltage ranges for layered transition metal oxides.In this review,a comprehensive review of the latest advancements in layered cathode materials for potassium-ion batteries is presented.Except for layered transition metal oxides,some polyanionic compounds,chalcogenides,and organic materials with the layered structure are introduced separately.Furthermore,summary and personal perspectives on future optimization and structural design of layered cathode materials are constructively discussed.We strongly appeal to the further exploration of layered polyanionic compounds and have demonstrated a series of novel layered structures including layered K_(3)V_(2)(PO_(4))_(3).

Synthesis and electrochemical characterization of layered Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O_2 cathode materialfor Li-ion batteries

Layered LiNi1/3Co1/3Mn1/3O2 materials were synthesized using a nickel-cobalt-manganese carbonate precursor obtained by chemical co-precipitation. The [Ni1/3Co1/3Mn1/3]CO3 precursor and the LiNi1/3Co1/3Mn1/3O2 powders were characterized by X-ray diffraction（XRD） and scanning electron micrograph（SEM）. The SEM analysis shows that these particles possess uniform and spherical morphology. The electrochemical properties of the (LiNi1/3-)(Co1/3Mn1/3O2) cathode material for rechargeable lithium-ion batteries such as the galvanostatic charge-discharge performance and cyclic voltammetry（CV） were measured. The results show that an initial discharge capacity of 190.29mA·h·g-1 is obtained in the voltage range of 2.54.6V and at a current rate of 0.1C at 25℃.The discharge capacity increases linearly with the increase of the upper cut-off voltage limit.

Degradation analysis and doping modification optimization for high-voltage P-type layered cathode in sodium-ion batteries

Advancing high-voltage stability of layered sodium-ion oxides represents a pivotal avenue for their progress in energy storage applications.Despite this,a comprehensive understanding of the mechanisms underpinning their structural deterioration at elevated voltages remains insufficiently explored.In this study,we unveil a layer delamination phenomenon of Na_(0.67)Ni_(0.3)Mn_(0.7)O_(2)(NNM)within the 2.0-4.3 V voltage,attributed to considerable volumetric fluctuations along the c-axis and lattice oxygen reactions induced by the simultaneous Ni^(3+)/Ni^(4+)and anion redox reactions.By introducing Mg doping to diminished Ni-O antibonding,the anion oxidation-reduction reactions are effectively mitigated,and the structural integrity of the P2 phase remains firmly intact,safeguarding active sites and precluding the formation of novel interfaces.The Na_(0.67)Mg_(0.05)Ni_(0.25)Mn_(0.7)O_(2)(NMNM-5)exhibits a specific capacity of100.7 mA h g^(-1),signifying an 83%improvement compared to the NNM material within the voltage of2.0-4.3 V.This investigation underscores the intricate interplay between high-voltage stability and structural degradation mechanisms in layered sodium-ion oxides.

Distinctive electrochemical performance of novel Fe-based Li-rich cathode material prepared by molten salt method for lithium-ion batteries

For constructing next-generation lithium-ion batteries with advanced performances,pursuit of highcapacity Li-rich cathodes has caused considerable attention.So far,the low discharge specific capacity and serious capacity fading are strangling the development of Fe-based Li-rich materials.To activate the extra-capacity of Fe-based Li-rich cathode materials,a facile molten salt method is exploited using an alkaline mixture of LiOH–LiNO3–Li2O2 in this work.The prepared Li1.09(Fe0.2Ni0.3Mn0.5)0.91O2 material yields high discharge specific capacity and good cycling stability.The discharge specific capacity shows an upward tendency at 0.1 C.After 60 cycles,a high reversible specific capacity of ~250 m Ah g-1is delivered.The redox of Fe3+/Fe4+and Mn3+/Mn4+are gradually activated during cycling.Notably,the redox reaction of Fe2+/Fe3+can be observed reversibly below 2 V,which is quite different from the material prepared by a traditional co-precipitation method.The stable morphology of fine nanoparticles(100–300 nm)is considered benefiting for the distinctive electrochemical performances of Li1.09(Fe0.2Ni0.3Mn0.5)0.91O2.This study demonstrates that molten salt method is an inexpensive and effective approach to activate the extra capacity of Fe-based Li-rich cathode material for high-performance lithium-ion batteries.

Novel Cathode Materials for Sodium Ion Batteries Derived from Layer Structured Titanate Cs₂Ti₅O₁₁·(1 + x)H₂O

A layer structured titanate Cs2Ti5O11·(1 + x)H2O (x = 0.70) has been prepared in a solid state reaction using Cs2CO3 and anatase type TiO2 at 900°C. Ion exchange reactions of Cs+ in the interlayer space were studied in aqueous solutions. The single phases of Li+, Na+ and H+ exchange products were obtained. The three kinds of resulting titanates were evaluated for use as the cathodes in rechargeable sodium batteries after dehydrations by heating at 200°C in a vacuum. The electrochemical measurements showed that they exhibited the reversible Na+ intercalation-deintercalation in a voltage range of 0.5 - 3.5 V or 0.7 - 4.0 V. The Li+ exchange product showed the best performance of the discharge-charge capacities in this study. The initial Na+ intercalation-deintercalation capacities of the Li2Ti5O11 were 120 mAh/g and 100 mAh/g;the amounts of Na+ correspond to 1.9 and 1.6 of the formula unit, respectively. The titanates are nontoxic, inexpensive and environmentally benign.

Reversible Mn^(2+)/Mn^(4+)double-electron redox in P3-type layer-structured sodium-ion cathode

The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can contribute extra capacity to increase energy density,but results in lattice instability and capacity fading caused by lattice oxygen gliding and oxygen release.In this work,reversible Mn^(2+)/Mn^(4+)redox is realized in a P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)cathode material with high specific capacity and structure stability via Co substitution.The contribution of oxygen redox is suppressed significantly by reversible Mn^(2+)/Mn^(4+)redox without sacrificing capacity,thus reducing lattice oxygen release and improving the structure stability.Synchrotron X-ray techniques reveal that P3 phase is well maintained in a wide voltage window of 1.5-4.5 V vs.Na^(+)/Na even at 10 C and after long-term cycling.It is disclosed that charge compensation from Co/Mn-ions contributes to the voltage region below 4.2 V and O-ions contribute to the whole voltage range.The synergistic contributions of Mn^(2+)/Mn^(4+),Co^(2+)/Co^(3+),and O^(2-)/(O_n)^(2-)redox in P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)lead to a high reversible capacity of 215.0 m A h g^(-1)at 0.1 C with considerable cycle stability.The strategy opens up new opportunities for the design of high capacity cathode materials for rechargeable batteries.

Spray pyrolysis synthesis of nickel-rich layered cathodes LiNi_(1-2x)Co_xMn_xO_2(x = 0.075, 0.05, 0.025) for lithium-ion batteries

In this study we report a series of nickel-rich layered cathodes LiNi1-2xCoxMnxO2（x = 0.075, 0.05,0.025） prepared from chlorides solution via ultrasonic spray pyrolysis. SEM images illustrate that the samples are submicron-sized particles and the particle sizes increase with the increase of Ni content.LiNi0.85Co0.075Mn0.075O2 delivers a discharge capacity of 174.9 mAh g-1 with holding 93% reversible capacity at 1 C after 80 cycles, and can maintain a discharge capacity of 175.3 mAh g-1 at 5 C rate. With increasing Ni content, the initial specific capacity increases while the cycling and rate performance degrades in some extent. These satisfying results demonstrate that spray pyrolysis is a powerful and efficient synthesis technology for producing Ni-rich layered cathode（Ni content 〉 80%）.

Unlocking high-rate O3 layered oxide cathode for Na-ion batteries via ion migration path modulation

O3-NaNi1/3Fe1/3Mn1/3O2is a promising layered cathode material with high specific capacity,low cost,and simple synthesis.However,sluggish kinetic hindrance is attributed to the size discrepancy between the large Na-ion and narrow tetrahedral interstitial positions,leading to inferior rate capacity and low reversible capacity.Herein,F with light-weight and strong electronegativity is introduced to substitute O atoms in the bulk structure,which intensifies the bond strength of transition metal and oxygen and enlarges the Na+diffusion channel.In addition,density-functional theory(DFT) calculations demonstrate that the electrostatic interaction is weakened between Na+in the tetrahedral site and the transitionmetal cation directly below it,dramatically reducing the migration barriers of Na+diffusion.Consequently,the as-obtained NaNi1/3Fe1/3Mn1/3O1.95F0.05sample displays outstanding rate performance of 86.7 mA h g^(-1)at 10 C and excellent capacity retention of 84.1% after 100 cycles at 2 C.Moreover,a full cell configuration using a hard carbon anode reaches the energy density of 307.7 Wh kg^(-1).This strategy paves the way for novel means of modulating the Na-ion migration path for high-rate O3-type layered cathode materials.

Preparation of Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O_2 powders for cathode material in secondary battery by solid-state method

Employing Li2CO3, NiO, Co3O4, and MnCO3 powders as starting materials, Li[Ni1/3Co1/3Mn1/3]O2 was synthesized by solid-state reaction method. Various grinding aids were applied during milling in order to optimize the synthesis process. After successive heat treatments at 650 and 950 ℃, the prepared powders were characterized by X-ray diffraction (XRD) analysis, scanning electron microscopy, and transmission electron microscopy. The powders prepared by adding salt (NaCl) as grinding aid exhibit a clear R3m layer structure. The powders by other grinding aids like heptane show some impurity peaks in the XRD pattern. The former powders show a uniform particle size distribution of less than 1 μm average size while the latter shows a wide distribution ranging from 1 to 10 μm. Energy dispersive X-ray (EDX) analysiss show that the ratio of Ni, Co, and Mn content in the powder is approximately 1/3, 1/3, and 1/3, respecively. The EDX data indicate no incorporation of sodium or chlorine into the powders. Charge-discharge tests gave an initial discharge capacity of 160 mAh·g-1 for the powders with NaCl addition while 70 mAh·g-1 for the powders with heptane.

Direct Synthesis of Al_2O_3-modified Li(Ni_(0.5)Co_(0.2)Mn_(0.3))O_2 Cathode Materials for Lithium Ion Batteries

To improve the cyclic stability at high temperature and thermal stability, the spherical Al2O3-modified Li（Ni0.5Co0.2Mn0.3）O2 was synthesized by a modified co-precipitation method, and the physical and electrochemical properties were studied. The TEM images showed that Li（Ni0.5Co0.2Mn0.3）O2 was modified successfully with nano-Al2O3. The discharge capacity retention of Al2O3-modified Li（Ni0.5Co0.2Mn0.3）O2 maintained about 99% after 200 cycles at high temperature（55 ℃）, while that of the bare one was only 86%. Also, unlike bare Li（Ni0.5Co0.2Mn0.3）O2, the Al2O3-modified material cathode exhibited good thermal stability.

Effect of particle micro-structure on the electrochemical properties of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cathode material

Ni-rich layered material is a kind of high-capacity cathode to meet the requirement of electric vehicles.As for the typical LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) material,the particle formation is significant for electrochemical properties of the cathode.In this work,the structure,morphology,and electrochemical performance of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) secondary particles and single crystals were systematically studied.A lower Ni^(2+)/Ni^(3+)molar ratio of 0.66 and a lower residual alkali content of 0.228wt%were achieved on the surface of the single crystals.In addition,the single crystals showed a discharge capacity of 191.6 mAh/g at 0.2 C(~12 mAh/g lower than that of the secondary particles)and enhanced the electrochemical stability,especially when cycled at 50℃ and in a wider electrochemical window(between 3.0 and 4.4 V vs.Li+/Li).The LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) secondary particles were suitable for applications requiring high specific capacity,whereas single crystals exhibited better stability,indicating that they are more suitable for use in long life requested devices.

Alleviating the sluggish kinetics of all-solid-state batteries via cathode single-crystallization and multi-functional interface modification

The application of Li-rich Mn-based cathodes, the most promising candidates for high-energy-density Liion batteries, in all-solid-state batteries can further enhance the safety and stability of battery systems.However, the utilization of high-capacity Li-rich cathodes has been limited by sluggish kinetics and severe interfacial issues in all-solid-state batteries. Here, a multi-functional interface modification strategy involving dispersed submicron single-crystal structure and multi-functional surface modification layer obtained through in-situ interfacial chemical reactions was designed to improve the electrochemical performance of Li-rich Mn-based cathodes in all-solid-state batteries. The design of submicron single-crystal structure promotes the interface contact between the cathode particles and the solid-state electrolyte,and thus constructs a more complete ion and electron conductive network in the composite cathode.Furthermore, the Li-gradient layer and the lithium molybdate coating layer constructed on the surface of single-crystal Li-rich particles accelerate the transport of Li ions at the interface, suppress the side reactions between cathodes and electrolyte, and inhibit the oxygen release on the cathode surface. The optimized Li-rich cathode materials exhibit excellent electrochemical performance in halide all-solid-state batteries. This study emphasizes the vital importance of reaction kinetics and interfacial stability of Lirich cathodes in all-solid-state batteries and provides a facile modification strategy to enhance the electrochemical performance of all-solid-state batteries based on Li-rich cathodes.

Characterization of Li-rich layered oxides by using transmission electron microscope

Lithium-rich layered oxides(LrLOs) deliver extremely high specific capacities and are considered to be promising candidates for electric vehicle and smart grid applications. However, the application of LrLOs needs further understanding of the structural complexity and dynamic evolution of monoclinic and rhombohedral phases, in order to overcome the issues including voltage decay, poor rate capability, initial irreversible capacity loss and etc. The development of aberration correction for the transmission electron microscope and concurrent progress in electron spectroscopy, have fueled rapid progress in the understanding of the mechanism of such issues. New techniques based on the transmission electron microscope are first surveyed, and the applications of these techniques for the study of the structure, migration of transition metal, and the activation of oxygen of LrLOs are then explored in detail, with a particular focus on the mechanism of voltage decay.

Effects of synthesis conditions on layered Li[Ni_(1/3)Co_(1/3)Mn_(1/3)]O_2 positive-electrode via hydroxide co-precipitation method for lithium-ion batteries

Layered Li[Ni1/3Co1/3Mn1/3]O2 was synthesized with complex metal hydroxide precursors that were prepared by a co-precipitation method.The influence of coordination between ammonia and transition-metal cations on the structural and electrochemical properties of the Li[Ni1/3Co1/3Mn1/3]O2 materials was studied.It is found that when the molar ratio of ammonia to total transition-metal cations is 2.7：1,uniform particle size distribution of the complex metal hydroxide is observed via scanning electron microscopy.The average particle size of Li[Ni1/3Co1/3Mn1/3]O2 materials was measured to be about 500 nm,and the tap-density was measured to be approximately 2.37 g/cm3,which is comparable with that of commercialized LiCoO2.XRD analysis indicates that the presently synthesized Li[Ni1/3Co1/3Mn1/3]O2 has a hexagonal layered-structure.The initial discharge capacity of the Li[Ni1/3Co1/3Mn1/3]O2 positive-electrode material is determined to be 181.5 mA·h/g using a Li/Li[Ni1/3Co1/3Mn1/3]O2 cell operated at 0.1C in the voltage range of 2.8-4.5 V.The discharge capacity at the 50th cycle at 0.5C is 170.6 mA·h/g.