The conductivity of non-crystalline fast ionic conductor for B_2O_3-Li_2O-LiCl-Al_2O_3 system is studiedin this paper. The glass structure of this system is discussed by means of infrared spectrum and X-ray fluorescen...The conductivity of non-crystalline fast ionic conductor for B_2O_3-Li_2O-LiCl-Al_2O_3 system is studiedin this paper. The glass structure of this system is discussed by means of infrared spectrum and X-ray fluorescence analysis, and the effects of LiCl and A1_2O_3 on the conductivity of Li^+ in the system are studied as well. Adding Li_2O to the system gives rise to transfer from [BO_3] triangular units to [BO_4] tetrahedral. When Li_2O content exceeds 30mol%, the main group of the glass is the diborate group with more [BO_4] tetrahedra. The adding of LiCl has no obvious influence on the glass structure, and LiCl is under a state dissociated by network, but with the increase of LiCl, the increase of conductivity is obvious. By adding A1_2O_3, the glass can be formed when the room-temperature is cooling down,the conductivity decreases while the conductive activatory energy increases for the glass. The experiment shows that conductivity in the room-temperature is σ= 6.2×10^(-6)Ω^(-1)cm^(-1), when at 300℃, the σ=6.8×10^(-3)Ω^(-1)cm^(-1). The conductive activatory energy computed is 0.6～1.0eV.展开更多
Oxygen vacancy plays vital roles in regulating the electronic and charge distribution of the oxygen deficient materials.Herein,abundant oxygen vacancies are created during assembling the two-dimensional(2D)ultra-thin ...Oxygen vacancy plays vital roles in regulating the electronic and charge distribution of the oxygen deficient materials.Herein,abundant oxygen vacancies are created during assembling the two-dimensional(2D)ultra-thin Bi_(2)MoO_(6) nanoflakes into three dimensional(3D)Bi_(2)MoO_(6) nanospheres,resulting in significantly improved performance for photocatalytical conversion of CO_(2) into liquid hydrocarbons.The increased performance is contributed by two primary sites,namely the abundant oxygen vacancy and the exposed molybdenum(Mo)atom induced by oxygen-migration,as revealed by the theoretical calculation.The oxygen vacancy(Ov)and uncovered Mo atom serving as dual binding sites for trapping CO_(2) molecules render the synchronous fixation-reduction process,resulting in the decline of activation energy for CO_(2) reduction from 2.15 eV on bulk Bi_(2)MoO_(6) to 1.42 eV on Ov-rich Bi_(2)MoO_(6).Such a striking decrease in the activation energy induces the efficient selective generation of liquid hydrocarbons,especially the methanol(C_(2)H_(5) OH)and ethanol(CH_(3) OH).The yields of CH_(3) OH and C_(2)H_(5) OH over the optimal Ov-Bi_(2)MoO_(6) is high up to 106.5 and 10.3μmol g^(-1) respectively,greatly outperforming that on the Bulk-Bi_(2)MoO_(6).展开更多
The bulk Fe<sup>60 CoxZr<sup>10 Mo5W2B<sup>23-x （x=1, 3, 5, 7, 9） amorphous rods with diameters of 1.5 mm were successfully prepared by copper mold casting method with the low purity raw materials....The bulk Fe<sup>60 CoxZr<sup>10 Mo5W2B<sup>23-x （x=1, 3, 5, 7, 9） amorphous rods with diameters of 1.5 mm were successfully prepared by copper mold casting method with the low purity raw materials. The amorphous and crystalline states, and thermal parameters, such as the glass transition temperature （Tg）, the initial crystallization temperature （Tx）, the supercooled liquid region （ΔTx=Tx-Tg）, the reduced glass transition temperature T<sup>rg （Tg/Tm, Tm: the onset temperature of melting of the alloy, and Tg/Tl, Tl: the finished temperature of melting of the alloy） were investigated by X-ray diffractometry （XRD） and differential scanning calorimetry （DSC） analysis. Glass forming ability of Fe<sup>60 CoxZr<sup>10 Mo5W2B<sup>23-x （x=1,3,5,7,9） bulk metallic glasses has been studied. According to the results, the alloy （x=7） with the highest T<sup>rg （Tg/Tl=0.607, Tg/Tl=0.590） value, has the strongest glass forming ability among these alloys because its composition is near eutectic composition. The wide supercooled liquid region over 72 K indicates the high thermal stability for this alloy system. This bulk metallic glass exhibits quite high strength （Hv 1020）. The success of production of the Fe-based bulk metallic glass with industrial materials is of great significance for the future progress of basic research and practical application.展开更多
采用碳酸盐共沉淀法和高温烧结工艺将一定量的Mo^(6+)掺杂到Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料中。利用XRD、SEM、EDS和恒流测试仪研究Mo^(6+)掺杂对Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料的晶体结构、...采用碳酸盐共沉淀法和高温烧结工艺将一定量的Mo^(6+)掺杂到Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料中。利用XRD、SEM、EDS和恒流测试仪研究Mo^(6+)掺杂对Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料的晶体结构、微观形貌和电化学性能的影响。结果显示,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)表现出更低的阳离子混排和优异的电化学性能。经过Mo^(6+)掺杂后的正极,由于Li^(+)高速的迁移速率,使得首次不可逆容量损失降低,并展现出更好的高倍率性能和优异的循环稳定性。在0.5C倍率下循环100周后,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)的容量保持率达到92.2%,远远大于Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的87.5%。另外,当放电倍率增大到5C时,Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的放电比容量要比Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)低21.0 m A·h/g。因此,采用Mo^(6+)掺杂改性Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料,可以有效提高锂电池的循环保持率和高倍率放电性能。展开更多
文摘The conductivity of non-crystalline fast ionic conductor for B_2O_3-Li_2O-LiCl-Al_2O_3 system is studiedin this paper. The glass structure of this system is discussed by means of infrared spectrum and X-ray fluorescence analysis, and the effects of LiCl and A1_2O_3 on the conductivity of Li^+ in the system are studied as well. Adding Li_2O to the system gives rise to transfer from [BO_3] triangular units to [BO_4] tetrahedral. When Li_2O content exceeds 30mol%, the main group of the glass is the diborate group with more [BO_4] tetrahedra. The adding of LiCl has no obvious influence on the glass structure, and LiCl is under a state dissociated by network, but with the increase of LiCl, the increase of conductivity is obvious. By adding A1_2O_3, the glass can be formed when the room-temperature is cooling down,the conductivity decreases while the conductive activatory energy increases for the glass. The experiment shows that conductivity in the room-temperature is σ= 6.2×10^(-6)Ω^(-1)cm^(-1), when at 300℃, the σ=6.8×10^(-3)Ω^(-1)cm^(-1). The conductive activatory energy computed is 0.6～1.0eV.
基金financially supported by the National Natural Science Foundation of China(Grants 52072165,52070092,51662031)。
文摘Oxygen vacancy plays vital roles in regulating the electronic and charge distribution of the oxygen deficient materials.Herein,abundant oxygen vacancies are created during assembling the two-dimensional(2D)ultra-thin Bi_(2)MoO_(6) nanoflakes into three dimensional(3D)Bi_(2)MoO_(6) nanospheres,resulting in significantly improved performance for photocatalytical conversion of CO_(2) into liquid hydrocarbons.The increased performance is contributed by two primary sites,namely the abundant oxygen vacancy and the exposed molybdenum(Mo)atom induced by oxygen-migration,as revealed by the theoretical calculation.The oxygen vacancy(Ov)and uncovered Mo atom serving as dual binding sites for trapping CO_(2) molecules render the synchronous fixation-reduction process,resulting in the decline of activation energy for CO_(2) reduction from 2.15 eV on bulk Bi_(2)MoO_(6) to 1.42 eV on Ov-rich Bi_(2)MoO_(6).Such a striking decrease in the activation energy induces the efficient selective generation of liquid hydrocarbons,especially the methanol(C_(2)H_(5) OH)and ethanol(CH_(3) OH).The yields of CH_(3) OH and C_(2)H_(5) OH over the optimal Ov-Bi_(2)MoO_(6) is high up to 106.5 and 10.3μmol g^(-1) respectively,greatly outperforming that on the Bulk-Bi_(2)MoO_(6).
文摘The bulk Fe<sup>60 CoxZr<sup>10 Mo5W2B<sup>23-x （x=1, 3, 5, 7, 9） amorphous rods with diameters of 1.5 mm were successfully prepared by copper mold casting method with the low purity raw materials. The amorphous and crystalline states, and thermal parameters, such as the glass transition temperature （Tg）, the initial crystallization temperature （Tx）, the supercooled liquid region （ΔTx=Tx-Tg）, the reduced glass transition temperature T<sup>rg （Tg/Tm, Tm: the onset temperature of melting of the alloy, and Tg/Tl, Tl: the finished temperature of melting of the alloy） were investigated by X-ray diffractometry （XRD） and differential scanning calorimetry （DSC） analysis. Glass forming ability of Fe<sup>60 CoxZr<sup>10 Mo5W2B<sup>23-x （x=1,3,5,7,9） bulk metallic glasses has been studied. According to the results, the alloy （x=7） with the highest T<sup>rg （Tg/Tl=0.607, Tg/Tl=0.590） value, has the strongest glass forming ability among these alloys because its composition is near eutectic composition. The wide supercooled liquid region over 72 K indicates the high thermal stability for this alloy system. This bulk metallic glass exhibits quite high strength （Hv 1020）. The success of production of the Fe-based bulk metallic glass with industrial materials is of great significance for the future progress of basic research and practical application.
文摘采用碳酸盐共沉淀法和高温烧结工艺将一定量的Mo^(6+)掺杂到Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料中。利用XRD、SEM、EDS和恒流测试仪研究Mo^(6+)掺杂对Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料的晶体结构、微观形貌和电化学性能的影响。结果显示,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)表现出更低的阳离子混排和优异的电化学性能。经过Mo^(6+)掺杂后的正极,由于Li^(+)高速的迁移速率,使得首次不可逆容量损失降低,并展现出更好的高倍率性能和优异的循环稳定性。在0.5C倍率下循环100周后,Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)的容量保持率达到92.2%,远远大于Li_(1.20)Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的87.5%。另外,当放电倍率增大到5C时,Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)的放电比容量要比Li_(1.20)Mn_(0.52)Ni_(0.13)Co_(0.13)Mo_(0.02)O_(2)低21.0 m A·h/g。因此,采用Mo^(6+)掺杂改性Li_(1.2)0Mn_(0.54)Ni_(0.13)Co_(0.13)O_(2)正极材料,可以有效提高锂电池的循环保持率和高倍率放电性能。
