Three dimensional(3D) nano-LiMn0.6Fe0.4PO4@C/CNT composite was successfully synthesized by an oleylamine-assisted solvothermal method. The prepared composite showed excellent electrochemical performance, especially ...Three dimensional(3D) nano-LiMn0.6Fe0.4PO4@C/CNT composite was successfully synthesized by an oleylamine-assisted solvothermal method. The prepared composite showed excellent electrochemical performance, especially superior high rate capability. It could deliver a specific discharge capacity of103.1 mAh/g, even at 80 C. The superior high rate performance of the as-prepared LiMn0.6Fe0.4PO4@C/CNT electrode is attributed to its unique 3D conducting network:(1) the prepared LiMn0.6Fe0.4PO4@C active particles were in nano-scale with a size of 30-50 nm;(2) LiMn0.6Fe0.4PO4 nanoparticles were uniformly coated by amorphous carbon with a thickness of 3 nm;(3) the graphitized conductive CNTs were dispersed homogenously among the LiMn0.6Fe0.4PO4@C active particles. The synergistic effect of the nanoscale amorphous carbon coated LiMn0.6Fe0.4PO4@C active particles and the graphitized CNTs reduces the diffusion path of the lithium ions and benefits the transference ability of electron.展开更多
Thin-film lithium-ion battery of LiMn2O4/Li1.3Al0.3Ti1.7(PO4)3/LiMn2O4 was fabricated using Li1.3Al0.3Ti1.7(PO4)3 sintered pellet as both substrate and electrolyte. Li1.3Al0.3Ti1.7(PO4)3 sintered pellet was prepared b...Thin-film lithium-ion battery of LiMn2O4/Li1.3Al0.3Ti1.7(PO4)3/LiMn2O4 was fabricated using Li1.3Al0.3Ti1.7(PO4)3 sintered pellet as both substrate and electrolyte. Li1.3Al0.3Ti1.7(PO4)3 sintered pellet was prepared by sol-gel technique, and the thin-film battery was heat-treated by rapid thermal annealing. Phase identification, morphology and electrochemical properties of the components and thin-film battery were investigated by X-ray diffractometry, scanning electron microscopy, electrochemical impedance spectroscopy and galvanostatic charge-discharge experiments. The results show that Li1.3Al0.3Ti1.7(PO4)3 possesses a electrochemical window of 2.4 V and an ionic conductivity of 1.2 ×10-4 S/cm. With Li1.3Al0.3Ti1.7(PO4)3 sintered pellet as both substrate and solid electrolyte, the fabricated thin-film battery with an open circuit voltage of 1.2V can be easily cycled.展开更多
基金supported by the National Natural Science Foundation of China (No. 51474196)the Major State Basic Research Development Program of China (973 Program No. 2013CB934700)
文摘Three dimensional(3D) nano-LiMn0.6Fe0.4PO4@C/CNT composite was successfully synthesized by an oleylamine-assisted solvothermal method. The prepared composite showed excellent electrochemical performance, especially superior high rate capability. It could deliver a specific discharge capacity of103.1 mAh/g, even at 80 C. The superior high rate performance of the as-prepared LiMn0.6Fe0.4PO4@C/CNT electrode is attributed to its unique 3D conducting network:(1) the prepared LiMn0.6Fe0.4PO4@C active particles were in nano-scale with a size of 30-50 nm;(2) LiMn0.6Fe0.4PO4 nanoparticles were uniformly coated by amorphous carbon with a thickness of 3 nm;(3) the graphitized conductive CNTs were dispersed homogenously among the LiMn0.6Fe0.4PO4@C active particles. The synergistic effect of the nanoscale amorphous carbon coated LiMn0.6Fe0.4PO4@C active particles and the graphitized CNTs reduces the diffusion path of the lithium ions and benefits the transference ability of electron.
基金Projects(03JJY6005 04JJ4038) supported by the Natural Science Foundation of Hunan Province, China Project(05C140) supported by the Education Office of Hunan Province, China
文摘Thin-film lithium-ion battery of LiMn2O4/Li1.3Al0.3Ti1.7(PO4)3/LiMn2O4 was fabricated using Li1.3Al0.3Ti1.7(PO4)3 sintered pellet as both substrate and electrolyte. Li1.3Al0.3Ti1.7(PO4)3 sintered pellet was prepared by sol-gel technique, and the thin-film battery was heat-treated by rapid thermal annealing. Phase identification, morphology and electrochemical properties of the components and thin-film battery were investigated by X-ray diffractometry, scanning electron microscopy, electrochemical impedance spectroscopy and galvanostatic charge-discharge experiments. The results show that Li1.3Al0.3Ti1.7(PO4)3 possesses a electrochemical window of 2.4 V and an ionic conductivity of 1.2 ×10-4 S/cm. With Li1.3Al0.3Ti1.7(PO4)3 sintered pellet as both substrate and solid electrolyte, the fabricated thin-film battery with an open circuit voltage of 1.2V can be easily cycled.