Preparing 3D Perovskite Li_(0.33)La_(0.557)TiO_(3)Nanotubes Framework Via Facile Coaxial Electro-Spinning Towards Reinforced Solid Polymer Electrolyte

It is of significance to construct continuous multiphase percolation channels with fast lithium-ion pathway in hybrid solid electrolytes.3D ceramic nanostructure frameworks have attracted great attention in this field.Herein,the three-dimensional perovskite Li_(0.33)La_(0.557)TiO_(3)nanotubes framework(3D-LLTO-NT)is fabricated via a facile coaxial electro-spinning process followed by a calcination process at 800°C.The hybrid polymer electrolyte of 3DLLTO-NT framework and poly(ethylene carbonate)(3D-LLTO-NT@PEC)shows improved ionic conductivity of 1.73×10^(-4)S cm^(-1)at ambient temperature,higher lithium-ion transference number(t_(Li)^(+))of 0.78 and electrochemical stability window up to 5.0 V vs Li/Li^(+).The all-solid-state cell of LiFePO_(4)/3D-LLTO-NT@PEC/Li delivers a high specific capacity of 140.2 mAh g^(-1)at 0.1 C at ambient temperature.This outstanding performance is attributed to the 3D ceramic nanotubes frameworks which provide fast lithium ion transfer pathway and stable interfaces.

Composite polymer electrolytes reinforced by a three-dimensional polyacrylonitrile/Li_(0.33)La_(0.557)TiO_(3)nanofiber framework for room-temperature dendrite-free all-solid-state lithium metal battery

Substituting liquid electrolytes with solid elec-trolytes is considered as an important strategy to solve the problem of flammability and explosion for traditional lithium-ion batteries(LIB).However,neither inorganic solid electrolytes(ISE)nor solid polymer electrolytes(SPE)alone can meet the operating requirements for room-temperature(RT)all-solid-state lithium metal batteries(ASSLMB).Here,we report a three-dimensional(3D)nanofiber framework reinforced polyethylene oxide(PEO)-based composite polymer electrolytes(CPE)through con-structing a nanofiber framework combining polyacryloni-trile(PAN)and fast Li-ion conductor Li_(0.33)La_(0.557)TiO_(3)(LLTO)framework by electrospinning method.Mean-while,the PEO electrolyte filled in the pores of the PAN/LLTO nanofiber framework can effectively isolate the direct contact between the chemically active Ti^(4+)in LLTO with lithium metal,thereby avoiding the occurrence of interfacial reactions.Enhanced electrochemical stability makes a wide electrochemical window up to 4.8 V with an ionic conductivity of about 9.87×10^(-5)S·cm^(-1)at RT.Benefiting from the excellent lithium dendrite growth inhibition ability of 3D PAN/LLTO nanofiber framework,especially when the mass of LLTO reaches twice that of the PAN,Li/Li symmetric cell could cycle stably for 1000 h without a short circuit.In addition,under 30℃,the LiFePO_(4)/Li ASSLMB using such CPE delivers large capacities of 156.2 and 140 mAh·g^(-1)at 0.2C and 0.5C,respectively.These results provide a new insight for the development of the next generation of safe,high-perfor-mance ASSLMBs.

Increasing ionic conductivity in Li_(0.33)La_(0.56)TiO_(3)thin-films via optimization of processing atmosphere and temperature

As a promising solid electrolyte for thin-film lithium batteries,the amorphous Li_(0.33)La_(0.56)TiO_(3)(LLTO)thin film has gained great interest.However,enhancing ionic conductivity remains challenging in the field.Here,a systematical study was performed to improve the ionic conductivity of sputter-deposited LLTO thin films via the optimization of processing atmosphere and temperature.By combining the optimized oxygen partial pressure(30%),annealing temperature(300℃),and annealing atmosphere(air),an amorphous LLTO thin film with an ionic conductivity of 5.32910^(-5)·S·cm^(-1) at room temperature and activation energy of 0.26 eV was achieved.The results showed that,first,the oxygen partial pressure should be high enough to compensate for the oxygen loss,but low enough to avoid the abusive oxygen scattering effect on lithium precursors that results in a lithium-poor composition.The oxygen partial pressure needs to achieve a balance between lithium loss and oxygen defects to improve the ionic conductivity.Second,a proper annealing temperature reduces the oxygen defects of LLTO thin films while maintaining its amorphous state,which improves the ionic conductivity.Third,the highest ionic conductivity for the LLTO thin films that were annealed in air(a static space without a gas stream)occurs because of the decreased lithium loss and oxygen defects during annealing.These findings show that the lithium-ion concentration and oxygen defects affect the ionic conductivity for amorphous LLTO thin films,which provides insight into the optimization of LLTO thin-film solid electrolytes,and generates new opportunities for their application in thinfilm lithium batteries.

High-Performance 3-D Fiber Network Composite Electrolyte Enabled with Li-Ion Conducting Nanofibers and Amorphous PEO-Based Cross-Linked Polymer for Ambient All-Solid-State Lithium-Metal Batteries

Solid electrolytes have gained attention recently for the development of next-generation Li-ion batteries since they can fun-damentally improve the battery stability and safety.Among various types of solid electrolytes,composite solid electrolytes(CSEs)exhibit both high ionic conductivity and excellent interfacial contact with the electrodes.Incorporating active nanofib-ers into the polymer matrix demonstrates an effective method to fabricate CSEs.However,current CSEs based on traditional poly(ethylene oxide)(PEO)polymer suffer from the poor ionic conductivity of PEO and agglomeration effect of inorganic fillers at high concentrations,which limit further improvements in Li+conductivity and electrochemical stability.Herein,we synthesize a novel PEO based cross-linked polymer(CLP)as the polymer matrix with naturally amorphous structure and high room-temperature ionic conductivity of 2.40×10^(−4)S cm^(−1).Li_(0.3)La_(0.557)TiO_(3)(LLTO)nanofibers are incorporated into the CLP matrix to form composite solid electrolytes,achieving enhanced ionic conductivity without showing filler agglomeration.The high content of Li-conductive nanofibers improves the mechanical strength,ensures the conductive network,and increases the total Li+conductivity to 3.31×10^(−4)S cm^(−1).The all-solid-state Li|LiFePO_(4)batteries with LLTO nanofiber-incorporated CSEs are able to deliver attractive specific capacity of 147 mAh g^(−1)at room temperature,and no evident dendrite is found at the anode/electrolyte interface after 100 cycles.