针对AZ31镁合金作为镁电池负极时存在自腐蚀速率大、阳极极化、电位滞后等问题,寻找合适的缓蚀剂及其用量调配电解液以提高电池的放电性能。通过腐蚀浸泡试验表征了缓蚀剂Li_(2)CrO_(4)的缓蚀效果,然后通过极化曲线、电化学阻抗谱研究了...针对AZ31镁合金作为镁电池负极时存在自腐蚀速率大、阳极极化、电位滞后等问题,寻找合适的缓蚀剂及其用量调配电解液以提高电池的放电性能。通过腐蚀浸泡试验表征了缓蚀剂Li_(2)CrO_(4)的缓蚀效果,然后通过极化曲线、电化学阻抗谱研究了Mg(ClO_(4))_(2)溶液中Li_(2)CrO_(4)用量对AZ31镁合金电化学性能的影响,最后通过组装水系镁锰电池进行恒流放电作为应用端测试。结果表明:Li_(2)CrO_(4)能够使AZ31镁合金的腐蚀电位正移,最大正移量达到150 m V,在水系镁锰电池应用中能够提高镁电池的放电平台,当Li_(2)CrO_(4)质量分数为0.7%时放电平台提高0.15 V左右;当Li_(2)CrO_(4)质量分数为1.2%时,其能够显著改善AZ31镁合金在Mg(ClO_(4))_(2)溶液中的腐蚀,水系镁锰电池放电容量达最大,为196.9 m A·h,相对空白溶液,电池的放电容量提高约64%,工作电压高达1.39 V且放电曲线稳定。展开更多
To meet the demand for high-performance LiCoO_(2) batteries,it is necessary to overcome challenges such as interface degradation and rapid capacity degradation caused by changes in bulk structure,especially under deep...To meet the demand for high-performance LiCoO_(2) batteries,it is necessary to overcome challenges such as interface degradation and rapid capacity degradation caused by changes in bulk structure,especially under deep delithiation and high temperature conditions.The ion conductive coating layer of Li_(3)PO_(4) has been directly modified on the surface of LiCoO_(2) particles using magnetron sputtering method,significantly improving the lithium storage performance of LiCoO_(2)@Li_(3)PO_(4) composites.Compared to pure LiCoO_(2),the modified LiCoO_(2) sample exhibits obviously better cycle life and high-temperature performance.Especially,under the conditions of 2 and 1 C,the LiCoO_(2)@Li_(3)PO_(4) electrode delivers excellent cycling performance at high voltage of 4.5 V,with capacity retention rates of 89.7%and 75.7%at room temperature and high temperature of 45℃,being far greater than those of 12.3%and 29.1%for bare LiCoO_(2) electrodes.It is discovered that the Li_(3)PO_(4) coating layer not only effectively enhances interface compatibility and suppresses the irreversible phase transition of LiCoO_(2),but also further improves the Li^(+)transport kinetics and significantly reduces battery polarization,ultimately enabling the modified LiCoO_(2) electrode to exhibit excellent lithium storage performance and thermal safety characteristics under high voltage conditions.Thus,such effective modified strategy can undoubtedly provide an important academic inspiration for LiCoO_(2) implication.展开更多
采用常规的固相反应法结合机械球磨制备了含碳质量分数23.7%的Li_(2)Ni_(2)(MoO_(4))3@C复合材料,并应用于锂离子电池负极。与纯Li_(2)Ni_(2)(MoO_(4))3相比,Li_(2)Ni_(2)(MoO_(4))3@C具有优异的电化学性能,在电流密度为200 mA ·g^...采用常规的固相反应法结合机械球磨制备了含碳质量分数23.7%的Li_(2)Ni_(2)(MoO_(4))3@C复合材料,并应用于锂离子电池负极。与纯Li_(2)Ni_(2)(MoO_(4))3相比,Li_(2)Ni_(2)(MoO_(4))3@C具有优异的电化学性能,在电流密度为200 mA ·g^(-1)时,50周循环后,可逆容量高达845 mAh·g^(-1)。值得注意的是,Li_(2)Ni_(2)(MoO_(4))3@C的首周库仑效率高达85%。此外,运用循环伏安法对Li_(2)Ni_(2)(MoO_(4))3@C复合物存储锂行为进行了初步探索。展开更多
以五氧化二钒干凝胶、碳酸锰、磷酸二氢铵、碳酸锂、乙炔黑为原料,采用固相法在相对较低的温度条件下合成了x Li Mn PO4·y Li3V2(PO4)3锂离子电池复合正极材料。采用X射线衍射(XRD)、扫描电镜(SEM)对其晶体结构和表面形貌进行表征...以五氧化二钒干凝胶、碳酸锰、磷酸二氢铵、碳酸锂、乙炔黑为原料,采用固相法在相对较低的温度条件下合成了x Li Mn PO4·y Li3V2(PO4)3锂离子电池复合正极材料。采用X射线衍射(XRD)、扫描电镜(SEM)对其晶体结构和表面形貌进行表征。结果表明,750℃下烧结15 h合成的3Li Mn PO4·Li3V2(PO4)3为结晶良好的两相结构,颗粒粒径较小且分布比较均匀,其在室温、0.2 C倍率下首次充放电容量分别为144.8 m Ah/g和139.8 m Ah/g,循环50次后容量为130.5 m Ah/g。展开更多
文摘针对AZ31镁合金作为镁电池负极时存在自腐蚀速率大、阳极极化、电位滞后等问题,寻找合适的缓蚀剂及其用量调配电解液以提高电池的放电性能。通过腐蚀浸泡试验表征了缓蚀剂Li_(2)CrO_(4)的缓蚀效果,然后通过极化曲线、电化学阻抗谱研究了Mg(ClO_(4))_(2)溶液中Li_(2)CrO_(4)用量对AZ31镁合金电化学性能的影响,最后通过组装水系镁锰电池进行恒流放电作为应用端测试。结果表明:Li_(2)CrO_(4)能够使AZ31镁合金的腐蚀电位正移,最大正移量达到150 m V,在水系镁锰电池应用中能够提高镁电池的放电平台,当Li_(2)CrO_(4)质量分数为0.7%时放电平台提高0.15 V左右;当Li_(2)CrO_(4)质量分数为1.2%时,其能够显著改善AZ31镁合金在Mg(ClO_(4))_(2)溶液中的腐蚀,水系镁锰电池放电容量达最大,为196.9 m A·h,相对空白溶液,电池的放电容量提高约64%,工作电压高达1.39 V且放电曲线稳定。
基金jointly supported by the Natural Science Foundations of China(No.22179020,12174057)Fujian Province’s“Young Eagle Program”Youth Top Talents Program。
文摘To meet the demand for high-performance LiCoO_(2) batteries,it is necessary to overcome challenges such as interface degradation and rapid capacity degradation caused by changes in bulk structure,especially under deep delithiation and high temperature conditions.The ion conductive coating layer of Li_(3)PO_(4) has been directly modified on the surface of LiCoO_(2) particles using magnetron sputtering method,significantly improving the lithium storage performance of LiCoO_(2)@Li_(3)PO_(4) composites.Compared to pure LiCoO_(2),the modified LiCoO_(2) sample exhibits obviously better cycle life and high-temperature performance.Especially,under the conditions of 2 and 1 C,the LiCoO_(2)@Li_(3)PO_(4) electrode delivers excellent cycling performance at high voltage of 4.5 V,with capacity retention rates of 89.7%and 75.7%at room temperature and high temperature of 45℃,being far greater than those of 12.3%and 29.1%for bare LiCoO_(2) electrodes.It is discovered that the Li_(3)PO_(4) coating layer not only effectively enhances interface compatibility and suppresses the irreversible phase transition of LiCoO_(2),but also further improves the Li^(+)transport kinetics and significantly reduces battery polarization,ultimately enabling the modified LiCoO_(2) electrode to exhibit excellent lithium storage performance and thermal safety characteristics under high voltage conditions.Thus,such effective modified strategy can undoubtedly provide an important academic inspiration for LiCoO_(2) implication.
文摘采用常规的固相反应法结合机械球磨制备了含碳质量分数23.7%的Li_(2)Ni_(2)(MoO_(4))3@C复合材料,并应用于锂离子电池负极。与纯Li_(2)Ni_(2)(MoO_(4))3相比,Li_(2)Ni_(2)(MoO_(4))3@C具有优异的电化学性能,在电流密度为200 mA ·g^(-1)时,50周循环后,可逆容量高达845 mAh·g^(-1)。值得注意的是,Li_(2)Ni_(2)(MoO_(4))3@C的首周库仑效率高达85%。此外,运用循环伏安法对Li_(2)Ni_(2)(MoO_(4))3@C复合物存储锂行为进行了初步探索。
文摘以五氧化二钒干凝胶、碳酸锰、磷酸二氢铵、碳酸锂、乙炔黑为原料,采用固相法在相对较低的温度条件下合成了x Li Mn PO4·y Li3V2(PO4)3锂离子电池复合正极材料。采用X射线衍射(XRD)、扫描电镜(SEM)对其晶体结构和表面形貌进行表征。结果表明,750℃下烧结15 h合成的3Li Mn PO4·Li3V2(PO4)3为结晶良好的两相结构,颗粒粒径较小且分布比较均匀,其在室温、0.2 C倍率下首次充放电容量分别为144.8 m Ah/g和139.8 m Ah/g,循环50次后容量为130.5 m Ah/g。
