Distinct sedimentary environments and their influences on carbonate reservoir evolution of the Lianglitag Formation in the Tarim Basin,Northwest China

The Upper Ordovician Lianglitag Formation carbonate rocks are important oil and gas reservoirs in the Tarim Basin, Northwest China, with obviously distinct reservoir properties among different oilfields. As a case area of the above carbonate reser- voirs correlation, Tahe and Tazhong oilfields are chosen for the study through an integrated analysis of biostratigraphic isoch- ronous framework, cores, thin sections, logs, and strontium isotopes. The research shows that the two areas were respectively attributed to different carbonate platforms during the Lianglitag Formation depositional phase. For the Lianglitag Formation, five fourth-order sequences may be divided in Tazhong, whereas only four fourth-order sequences are preserved in Tahe that correspond to the lower ones observed in Tazhong. The Lianglitag Formation carbonate platform in Tahe was characterized by ramp and/or weak rimmed types, with low depositional rates （37 ktm/a）, higher whole-rock clastic contents, and higher 878r/86Sr isotope ratios of carbonate matrix, showing relatively deep-water environment and evident terrigenous input for car- bonate deposition. However, a strongly rimmed carbonate platform was developed in Tazhong, with high depositional rates of 250 p.m/a and less whole-rock clastic contents, indicating a high-energy depositional environment. Because of the sedimentary environment differences mentioned above, less high-energy facies but relatively intense syndepositional （early diagenetic） sea-water cementation of carbonates were developed in Tahe, and ubiquitous high-energy reef and shoal facies, with a frequent exposure to subaerial, and weak syndepositional sea-water cementation of carbonates in Tazhong. Therefore, fewer primary pores occurred in the Lianglitag Formation carbonate rocks of Tahe, whereas more primary pores were preserved in the same lithostratigraphic unit of the Tazhong （No. 1 fault zone）. Available high-energy reef-shoal facies and early diagenesis, with more primary pores preserved, provided a key material basis for the Lianglitag Formation carbonate reservoirs that largely oc- curred in Tazhong.

Large-scale Tazhong Ordovician Reef-flat Oil-Gas Field in the Tarim Basin of China

The Tazhong reef-fiat oil-gas field is the first large-scale Ordovician organic reef type oil-gas field found in China. Its organic reefs were developed in the early Late Ordovician Lianglitag Formation, and are the first large reefs of the coral-stromatoporoid hermatypic community found in China. The organic reefs and platform-margin grain banks constitute a reef-flat complex, mainly consisting of biolithites and grainstones. The biolithites can be classified into the framestone, baffiestone, bindstone etc. The main body of the complex lies around the wells from Tazhong-24 to Tazhong-82, trending northwest, with the thickness from 100 to 300 m, length about 220 km and width 5-10 km. It is a reef-flat lithologic hydrocarbon reservoir, with a very complex hydrocarbon distribution： being a gas condensate reservoir as a whole with local oil reservoirs. The hydrocarbon distribution is controlled by the reef complex, generally located in the upper 100-200 m part of the complex, and largely in a banded shape along the complex. On the profile, the reservoir shows a stratified feature, with an altitude difference of almost 2200 m from southeast to northwest. The petroleum accumulation is controlled by karst reservoir beds and the northeast strike-slip fault belt. The total geologic reserves had reached 297.667 Mt by 2007.

Distribution regularity of the Ordovician reef-bank reservoir inside sequence stratigraphic ework in central Tarim Basin

Based on the integrated study of the outcrops, the seismic, drilling and logging data of Lianglitage formation in central Tarim Basin, the sequence stratigraphic framework of the platform margin is built, and the Lianglitage formation is divided into 3 third-order sequences. The vertical pattern and lateral distribution for carbonate reef-bank reservoir in sequence stratigraphic framework are analyzed. The reef-bank reservoir mainly developed in highstand system tract of sequence Ssq2, and distributed along the carbonate platform margin of the Middle-Late Ordovician in central Tarim Basin. The mudstone mound, organic reef, granule bank are vertically stacked. Laterally, the area of well shun3-shun4-shun2-shun6 are characterized by multiphase bank reservoir overlapping, and the area of well TZ82 -TZ44 - TZ161 -TZ24 - TZ26 are characterized by multiphase organic reef and bank overlapping. The reef-bank complexes in sequence Ssq2 are the main targets of exploration in central Tarim Basin.

Carbon and oxygen isotope variation and its implication for marine sequence: A case study of Ordovician in Tarim Basin

Carbon and oxygen isotopes of marine carbonate rocks or fossil shells could indicate global sea-level relative change.Generally,heavier carbon isotopes or lighter oxygen isotopes reflected rise of global sea-level relative changes,and vice versa.For carbonate rocks deposited before Tertiary,carbon isotope was more stable than oxygen isotope,and thus it was more suitable to indicate global sea-level relative fluctuation.Within time limit of the 3rd-order sequence(1-10Ma),large scale migration of carbonate platforms would not occur and carbonate productivity would not change greatly,therefore,a research method of marine tectonic sequence(i.e,a contrastive analysis method of carbon and oxygen isotopessedimentary cycles)was proposed.Thus,the marine 3rd-order sequences were divided the global sealevel sequence which was controlled by global sea-level change and the tectonic sequence which was controlled by regional tectonic subsidence and uplift.The global sea-level fluctuation indicated by carbon and oxygen isotopes were consistent with variation of sedimentary cycles and water depth of the global sea-level sequence,but were not consistent with variation of sedimentary cycles and water depth of the tectonic sequence.As a case study of Ordovician in Tarim Basin,two 3rd-order global sea-level sequences were identified in the Lower Ordovician,while six 3rd-order tectonic sequences controlled by collision and compression between Arkin island arc,Kudi active continental margin uplift and Tarim Plate were identified in the Middle and Upper Ordovician.Particularly,OSQ6 in the Upper Ordovician(Lianglitage Formation)was a typical tectonic sequence.