Performance optimization of a SERF atomic magnetometer based on flat-top light beam

We explore the impact of pumping beams with different transverse intensity profiles on the performance of the spinexchange relaxation-free(SERF) atomic magnetometers(AMs). We conduct experiments comparing the traditional Gaussian optically-pumped AM with that utilizing the flat-top optically-pumped(FTOP) method. Our findings reveal that the FTOP-based approach outperforms the conventional method, exhibiting a larger response, a narrower magnetic resonance linewidth, and a superior low-frequency noise performance. Specifically, the use of FTOP method leads to a 16% enhancement in average sensitivity within 1 Hz–30 Hz frequency range. Our research emphasizes the significance of achieving transverse polarization uniformity in AMs, providing insights for future optimization efforts and sensitivity improvements in miniaturized magnetometers.

Measurement of the degree of temporal coherence of unpolarized light beams

We measure the electromagnetic degree of temporal coherence and the associated coherence time for quasi-monochromatic unpolarized light beams emitted by an LED, a filtered halogen lamp, and a multimode He–Ne laser.The method is based on observing at the output of a Michelson interferometer the visibilities(contrasts) of the intensity and polarization-state modulations expressed in terms of the Stokes parameters. The results are in good agreement with those deduced directly from the source spectra. The measurements are repeated after passing the beams through a linear polarizer so as to elucidate the role of polarization in electromagnetic coherence. While the polarizer varies the equal-time degree of coherence consistently with the theoretical predictions and alters the inner structure of the coherence matrix, the coherence time remains almost unchanged when the light varies from unpolarized to polarized. The results are important in the areas of applications dealing with physical optics and electromagnetic interference.

Light weight analysis of a skeleton vehicle frame using BS960 super-high-strength steel

Static strength finite element analysis was conducted to decrease the weight of a skeleton vehicle＇s frame. Results indicated that the maximum stress occurs on the front beam ＇s variable section area. Dynamic sensitivity analysis elucidated the relationship between the maximum stress and the thickness of a particular beam,e. g.,top,middle,and bottom beam. Displacement was analyzed by the key part that influenced the maximum stress. Finally,the new plan using BS960 super-high-strength beam steel and the preferred beam thickness was compared with the original plan. New combinations of beam thickness were introduced on the basis of different purposes; the maximum responding light w eight ratio was 21%.

Non-geometrical effects on Gaussian beams transmitting through a thin dielectric slab

It is shown that a Gaussian light beam transmitting through a planar thin dielectric slab in the air undergoes four different effects, i.e. lateral Goos-Hanchen-like （GHL） displacement, angular deflection, width modification and longitudinal focal shift as compared with the results predicted by geometrical optics. According to the Taylor expansion of the exponent of transmission coefficient when expressed as an exponential form, the lateral GHL displacement and the angular deflection are the first-order effects and can be negative or positive. The width modification and the longitudinal focal shift are the second-order effects and can also be positive or negative. Owing to the waist-width dependent term, the non-geometrical effects of transmitted beam are not identical with the non-specular effects of reflected beam. The conditions for the validity of those effects are suggested and numerical simulations are also given.

Optimizing depth of field in 3D light-field display by analyzing and controlling light-beam divergence angle

A concept of divergence angle of light beams(DALB)is proposed to analyze the depth of field(DOF)of a 3D light-field display system.The mathematical model between DOF and DALB is established,and the conclusion that DOF and DALB are inversely proportional is drawn.To reduce DALB and generate clear depth perception,a triple composite aspheric lens structure with a viewing angle of 100°is designed and experimentally demonstrated.The DALB-constrained 3D light-field display system significantly improves the clarity of 3D images and also performs well in imaging at a 3D scene with a DOF over 30 cm.

Gravitational Energy Levels: Part Two

We present here a model that explains in a simple, easy and summarized manner, the values, meaning and reasons for the force of gravity, using simple physical tools. According to this model, a gravitational field actually creates different energy levels, similar to the atom, around the center of mass of the gravitational source, and a transition between the energy levels results in the creation of the force of weight acting on each small body which is in the gravitational field. As the body approaches a gravitational field, its energy value decreases to a value of m0u(R)2 , proportional to the distance R between the centers of the masses, when u(R) is the magnitude of the self-speed of light vector (the progression in the time axis) of the small body, and its value decreases as it approaches the center of the origin of the field. This change in the energy levels is the cause of the force of gravity. A formula is obtained for the concept of potential gravitational energy and the variables on which it depends, and for the time differences between two frames that are in the gravitational field, taking into account the motion and location of each frame. It is obtained from this model that the speed of light is also a variable value as a result of the effect of the gravitational field.

Y2O3-CeO2-ZrO2 Powder Prepared by Co-Precipitation and As-Plasma-Sprayed Coating

The characteristic of the bond zone between Ni-based alloy light beam surfacing layer (SL) and base metal (BM) was investigated by scanning electron microscope, energy dispersive spectrometer and X-ray diffraction. The results show that the bond zone, which consists of γ-Ni or γ-(Fe, Ni) planar crystal band close to SL and α-Fe bright band close to heat affected zone (HAZ), is actually the transition zone of composition and microstructure between SL and HAZ, and the metallurgical bond interface lies between the α-Fe bright band and HAZ. With the increase of light beam heat input from 2 kJ/mm to 4 kJ/mm, the width of the bond zone increases from 4 μm to 15 μm, and the morphology of bond interface changes from zigzag to straight. The formation of bond interface indicates the formation of reliable metallurgical bond between SL and BM.

Linear and angular momenta in tightly focused vortex segmented beams of light(Invited Paper)

We investigate the linear momentum density of light, which can be decomposed into spin and orbital parts, in the complex three-dimensional field distributions of tightly focused vortex segmented beams. The chosen angular spectrum exhibits two spatially separated vortices of opposite charge and orthogonal circular polarization to generate phase vortices in a meridional plane of observation. In the vicinity of those vortices, regions of negative orbital linear momentum occur. Besides these phase vortices, the occurrence of transverse orbital angular momentum manifests in a vortex charge-dependent relative shift of the energy density and linear momentum density.

Super-resolution longitudinally polarized light needle achieved by tightly focusing radially polarized beams

Based on the vector diffraction theory, a super-resolution longitudinally polarized optical needle with ultra-long depth of focus(DOF) is generated by tightly focusing a radially polarized beam that is modulated by a self-designed ternary hybrid(phase/amplitude) filter(THF). Both the phase and the amplitude patterns of THF are judiciously optimized by the versatile particle swarm optimization(PSO) searching algorithm. For the focusing configuration with a combination of a high numerical aperture(NA) and the optimized sine-shaped THFs, an optical needle with the full width at half maximum(FWHM) of 0.414λ and the DOF of 7.58λ is accessed, which corresponds to an aspect ratio of 18.3. The demonstrated longitudinally polarized super-resolution light needle with high aspect ratio opens up broad applications in high-density optical data storage, nano-photolithography, super-resolution imaging and high-efficiency particle trapping.

Characteristic of Bond Zone between Powder Surfacing Layer and Base Metal

The characteristic of the bond zone between Ni-based alloy light beam surfacing layer(SL)and base metal(BM)was investigated by scanning electron microscope,energy dispersive spectrometer and X-ray diffraction.The results show that the bond zone,which consists ofγ-Ni orγ-(Fe,Ni)planar crystal band close to SL andα-Fe bright band close to heat affected zone(HAZ),is actually the transition zone of composition and microstructure between SL and HAZ,and the metallurgical bond interface lies between theα-Fe bright band and HAZ.With the increase of light beam heat input from 2kJ/mm to 4kJ/mm,the width of the bond zone increases from 4μm to 15μm,and the morphology of bond interface changes from zigzag to straight.The formation of bond interface indicates the formation of reliable metallurgical bond between SL and BM.

Probing the fractional topological charge of a vortex light beam by using dynamic angular double slits

Vortex beams with fractional topological charge(FTC) have many special characteristics and novel applications.However, one of the obstacles for their application is the difficulty of precisely determining the FTC of fractional vortex beams. We find that when a vortex beam with an FTC illuminates a dynamic angular double slit(ADS), the far-field interference patterns that include the information of the FTC of the beam at the angular bisector direction of the ADS vary periodically. Based on this property, a simple dynamic ADS device and data fitting method can be used to precisely measure the FTC of a vortex light beam with an error of less than 5%.

In-fiber integrated optics： an emerging photonics integration technology [Invited]

In-fiber integrated optics is an attempt to use silica fiber as a substrate, integrating various optical paths or optical components into a single fiber, to build a functional optical device or component, and to realize a micro optical system, achieving various functions. In-fiber integrated optics is expected to he a new branch of photonics integration. This integration technique enables convenient light beams control and manipulation inside in one fiber. It also provides a research platform with micro and nano scale for interaction between light wave and microfluidic materials. In this review, we briefly summarize the main ideas and key technologies of the in-fiber integrated optics by series integration examples.

Reference direction based immune clone algorithm for many-objective optimization

In this paper, a new preference multi-objective optimization algorithm called immune clone algorithm based on reference direction method （RD-ICA） is proposed for solving many-objective optimization problems. First, an intelligent recombination operator, which performs well on the functions comprising many parameters, is introduced into an immune clone algorithm so as to explore the potentially excellent gene segments of all individuals in the antibody pop- ulation. Second, a reference direction method, a very strict ranking based on the desire of decision makers （DMs）, is used to guide selection and clone of the active population. Then a light beam search （LBS） is borrowed to pick out a small set of individuals filling the external population. The proposed method has been extensively compared with other recently proposed evolutionary multi-objective optimization （EMO） approaches over DTLZ problems with from 4 to 100 objectives. Experimental results indicate RD-ICA can achieve competitive results.