Ghost imaging based on the control of light source bandwidth

A scheme to improve the quality in ghost imaging(GI)by controlling the bandwidth of light source(BCGI)is proposed.The theoretical and numerical results show that the reconstruction result with high quality can be obtained by adjusting the bandwidth range of the light source appropriately,and the selection criterion of the bandwidth is analyzed by the power distribution of the imaging target.A proof-of-principle experiment is implemented to verify the theoretical and numerical results.In addition,the BCGI also presents better anti-noise performance when compared with some popular GI methods.

Metamerism Appreciation of Jadeite-Jade Green under the Standard Light Sources D_(65),A and CWF

We tested 288 pieces of the polished cabochon jadeite-jade with high quality green and smooth surfaces using the colorimeter Color i5 based on the CIE 1976 L＊a＊b＊ uniform color space. The color changes after alternating three CIE standard light sources D65, A and CWF were compared, and the degree of metamerism was evaluated. The results show that the CIE standard light sources D65, A and CWF increase the chroma of green and turn bluish green into vivid green, which are similar or to nearly colorless and transparent glass-like samples with fine textures. When the three light sources were individually alternated, the lightness of the jadeite-jades showed little change, but the tone changed significantly. Metamerism occurred only in 3 pairs among the 16 samples that were selected by cluster analysis for quality, and the metamerism colors were highly consistent of L＊D65∈（43.47, 46.75）, C＊D65∈（65.20, 68.80） and ho＊D65∈（138.10, 140.23）. We can conclude that the jadeite-jade green gradually turns to blue when the color temperature of the light source increases. But when considering both the light sources and the samples, D65 is more suitable to be the light source of jadeite-jade green when compared with the light sources CWF and A. Compared with the CIE standard green and high chroma green, high-quality jadeite-jade green has a slight yellow tone, low lightness and high chroma. The special metamerism index decreased to 1 when the light source alternated among D65, A and CWF. Therefore, the color of jadeite-jade green might be slightly influenced by alternating of the light sources.

Fast recognition using convolutional neural network for the coal particle density range based on images captured under multiple light sources

A method based on multiple images captured under different light sources at different incident angles was developed to recognize the coal density range in this study.The innovation is that two new images were constructed based on images captured under four single light sources.Reconstruction image 1 was constructed by fusing greyscale versions of the original images into one image,and Reconstruction image2 was constructed based on the differences between the images captured under the different light sources.Subsequently,the four original images and two reconstructed images were input into the convolutional neural network AlexNet to recognize the density range in three cases:-1.5(clean coal) and+1.5 g/cm^(3)(non-clean coal);-1.8(non-gangue) and+1.8 g/cm^(3)(gangue);-1.5(clean coal),1.5-1.8(middlings),and+1.8 g/cm^(3)(gangue).The results show the following:(1) The reconstructed images,especially Reconstruction image 2,can effectively improve the recognition accuracy for the coal density range compared with images captured under single light source.(2) The recognition accuracies for gangue and non-gangue,clean coal and non-clean coal,and clean coal,middlings,and gangue reached88.44%,86.72% and 77.08%,respectively.(3) The recognition accuracy increases as the density moves further away from the boundary density.

Adaptive illumination light source for online machine vision inspection of tin steel strips

The different reflection characteristics of the surface of tin steel strips and the different speeds of the tinning line demand an adaptive illumination light source for online machine vision inspection. This light source can be integrated with a time delay integration charge-coupled device （TDI CCD ） to capture the images of moving objects and facilitate inspection of the surface quality of tin steel strips. On-site application show the effectiveness of the TDI camera with the adaptive illumination light source in detecting the surface defects on tin steel strips of three different materials and with different tin coating weights.

Watts-level ultraviolet-CLED integrated light sources for efficient surface and air sterilization

With the epidemic of the coronavirus disease(COVID-19) infection, AlGaN-based ultraviolet-C light emitting diodes(UVC-LEDs) have attracted widespread attention for their sterilization application. However, the sterilization characters of high power integrated light sources(ILSs) haven’t been widely investigated before utilizing in public sanitary security. In this work,by integrating up to 195 UVC-LED chips, high power UVC-LED ILSs with a light output power(LOP) of 1.88 W were demonstrated. The UVC-LED ILSs were verified to have efficient and rapid sterilization capability, which have achieved more than99.9% inactivation rate of several common pathogenic microorganisms within 1 s. In addition, the corresponding air sterilization module based on them was also demonstrated to kill more than 97% of Staphylococcus albus in the air of 20 m3 confined room within 30 min. This work demonstrates excellent sterilization ability of UVC-LED ILSs with high LOP, revealing great potential of UVC-LEDs in sterilization applications in the future.

Ghost Imaging with High Visibility Using Classical Light Source

We experimentally demonstrate a novel ghost imaging experiment utilizing a classical light source, capable of resolving objects with a high visibility. The experimental results show that our scheme can indeed realize ghost imaging with high visibility for a relatively complicated object composed of three near-ellipse-shaped holes with different dimensions. In our experiment, the largest hole is -36 times of the smMlest one in area. Each of the three holes exhibits high-visibility in excess of 80%. The high visibility and high spatial-resolution advantages of this technique could have applications in remote sensing.

Measurement Device Independent Quantum Key Distribution Based on Orbital Angular Momentum under Parametric Light Source

On the one hand,existing measurement device independent quantum key distribution(MDI-QKD)protocols have usually adopted single photon source(SPS)and weak coherent photon(WCP),however,these protocols have suffered from multi-photon problem brought from photon splitter number attacks.On the other hand,the orbital angular momentum(OAM)-MDI-QKD protocol does not need to compare and adjust the reference frame,solving the dependency of the base in the MDI-QKD protocol.Given that,we propose the OAM-MDI-QKD protocol based on the parametric light sources which mainly include single-photon-added-coherent(SPACS)and heralded single-photon sources(HSPS).Due to the stability of OAM and the participation of parametric light sources,the performance of MDI-QKD protocol gradually approaches the ideal situation.Numerical simulation shows that compared with WCP scheme,HSPS and SPACS schemes have increased the maximum secure transmission distance by 30 km and 40 km respectively.

Phase-matching quantum key distribution with light source monitoring

The transmission loss of photons during quantum key distribution(QKD)process leads to the linear key rate bound for practical QKD systems without quantum repeaters.Phase matching quantum key distribution(PM-QKD)protocol,an novel QKD protocol,can overcome the constraint with a measurement-device-independent structure,while it still requires the light source to be ideal.This assumption is not guaranteed in practice,leading to practical secure issues.In this paper,we propose a modified PM-QKD protocol with a light source monitoring,named PM-QKD-LSM protocol,which can guarantee the security of the system under the non-ideal source condition.The results show that our proposed protocol performs almost the same as the ideal PM-QKD protocol even considering the imperfect factors in practical systems.PMQKD-LSM protocol has a better performance with source fluctuation,and it is robust in symmetric or asymmetric cases.

A Light Source System of Multi-star Simulator with Adjustable Background and Controllable Magnitude

A light source of multi-star simulator capable of background adjustment and magnitude control has been designed.Two integrating spheres are employed as the star-point light source and the background light source respectively.A beam splitter prism has been designed to serve as the beam combiner for the star-point and the background light sources,and a mathematical model has been constructed respectively to compute the light flux of the two integrating spheres.A magnitude testing system and a background testing system have been created using low-light illuminometer,luminance meter,and testing instruments to measure the star-point magnitude and the background luminance of the multi-star simulator.The test results suggest that the star-point magnitude is adjustable from0 to+5 m_v,with a simulation precision superior to ±0.026 m_v.The maximum background luminance is 3.8×10~5 cd·m^(-2),and the minimum background luminance is6.4×10^(-2)cd·m^(-2).The designed light source system can meet the requirements for simulating the stellar map with a sky background.

A Scheduling Strategy of Light Supplement in Agricultural Greenhouse Based on the Displacement of Light Source Group

LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the importance of illumination uniformity to the growth of crops, this paper intends to establish the illuminance model of light source without considering the influence factors such as the difference of each light source group and air scattering. On this basis, the reasonable layout of each light source position in the light source group is considered. Therefore, a light replenishment scheduling strategy based on the displacement of light source group is proposed in this paper Improve the uniformity of illumination in agricultural greenhouse and reduce its operation cost. Experiments show that the strategy is effective.

A compact Einstein–Podolsky–Rosen entangled light source

We present a stable entangled light source that integrates the pump laser, entanglement generator, detectors, and electronic control systems. By optimizing the design of the mechanical elements and the optical path, the size of the source is minimized, and the quantum correlations over 6 d B can be directly provided by the entangled source. The compact and stable entangled light source is suitable for practical applications in quantum information science and technology. The presented protocol provides a useful reference for manufacturing products of bright entangled light sources.

Recharging method of active medical implant using wearable incoherent light source

A new method for recharging active medical implant（AMI）in vitro based on incoherent light source and results of the simulation experiments are proposed.Firstly,the models of the AMI recharging method based on incoherent light source in vitro are developed,which include the models of an incoherent light source and skin tissue.Secondly,simulation experiments of the incoherent light source of the AMI recharging process in vitro based on the Monte Carlo（MC）method are carried out.Finally,absorbed fractions of different layers and distributions of density along x axis of the tissue model and other important conclusions have been achieved.

The Hybrid Light Source for Projection Display

A scheme of hybrid light source using lasers and LEDs for projection display is presented;the si-mulation results show that projectors with the proposed scheme can achieve high brightness of over 1000 lm, good uniformity of illumination and chromaticity. It also provides an improved me-thod for light source with longer life, wider color garment and higher adaptability to environment which can replace UHP in traditional projectors.

Nanophotonic catalytic combustion enlightens mid-infrared light source

The tunable mid-infrared source in a broad-spectrum heralds great scientific implications and remains a challenge.Nanolocalized catalytic combustion facilitates access to customizable infrared light sources.Here,we report on fabricating platinumalumina bilayer nano-cylinder arrays for methanol catalytic combustion,which enables them to act as an array of infrared point light sources,with wavelength tunable by controlling the flow rate of methanol/air mixture.We then propose a technique of integrating nanophotonic structures with catalytic combustion to engineer infrared light emission.We demonstrate a prototype of a topological photonic crystal catalyst array in which infrared emission can be enhanced significantly with highly vertical emission.This work establishes a framework of nanophotonic catalytic combustion for infrared light sources.

Coherent free-electron light sources

Free-electron light sources feature extraordinary luminosity,directionality,and coherence,which has enabled significant scientific progress in fields including physics,chemistry,and biology.The next generation of light sources has aimed at compact radiation sources driven by free electrons,with the advantages of reduction in both space and cost.With the rapid development of ultra-intense and ultrashort lasers,great effort has been devoted to the quest for compact free-electron lasers(FELs).This review focuses on the current efforts and advancements in the development of compact FELs,with a particular emphasis on two notable paths:the development of compact accelerators and the construction of micro undulators based on innovative materials/structures or optical modulation of electrons.In addition,the physical essence of inverse Compton scattering is discussed,which offers remarkable capability to develop an optical undulator with a spatial period that matches the optical wavelength.Recent scientific developments and future directions for miniaturized and integrated free-electron coherent light sources are also reviewed.In the future,the prospect of generating ultrashort electron pulses will provide fascinating means of producing superradiant radiation,promising high brilliance and coherence even on a micro scale using optical micro undulators.

Long-term storage life of light source modules by temperature cycling accelerated life test

Light source modules are the most crucial and fragile devices that affect the life and reliability of the interferometric fiber optic gyroscope （IFOG）. While the light emitting chips were stable in most cases, the module packaging proved to be less satisfactory. In long-term storage or the working environment, the ambient temperature changes constantly and thus the packaging and coupling performance of light source modules are more likely to degrade slowly due to different materials with different coefficients of thermal expansion in the bonding interface. A constant temperature accelerated life test cannot evaluate the impact of temperature variation on the performance of a module package, so the temperature cycling accelerated life test was studied. The main failure mechanism affecting light source modules is package failure due to solder fatigue failure including a fiber coupling shift, loss of cooling efficiency and thermal resistor degradation, so the Norris-Landzberg model was used to model solder fatigue life and determine the activation energy related to solder fatigue failure mechanism. By analyzing the test data, activation energy was determined and then the mean life of light source modules in different storage environments with a continuously changing temperature was simulated, which has provided direct reference data for the storage life prediction of IFOG.

External cavity diode laser as a stable-frequency light source for application in laser cooling of molecules

We demonstrate a scheme to use a Littman configuration external cavity diode laser （ECDL） as a stablefrequency light source to stabilize two cw single-mode Ti：sapphire lasers for laser cooling of magnesium fluoride molecules. An ECDL based on the Littman configuration is constructed and stabilized by a digital signal processor system. We stabilize the frequency of our ECDL to 4-0.77 MHz precision over 10 h and the Allan standard deviation reaches 2.6 × 10-11 at an integration time of 10 s. We lock two Ti：sapphire lasers through a transfer cavity, and either laser has a long-term frequency stability of 4-2.5 MHz.

On-chip light sources for silicon photonics

Serving as the electrical to optical converter,the on-chip silicon light source is an indispensable component of silicon photonic technologies and has long been pursued.Here,we briefly review the history and recent progress of a few promising contenders for on-chip light sources in terms of operating wavelength,pump condition,power consumption,and fabrication process.Additionally,the performance of each contender is also assessed with respect to thermal stability,which is a crucial parameter to consider in complex optoelectronic integrated circuits(OEICs)and optical interconnections.Currently,III-V-based silicon(Si)lasers formed via bonding techniques demonstrate the best performance and display the best opportunity for commercial usage in the near future.However,in the long term,direct hetero-epitaxial growth of III–V materials on Si seems more promising for low-cost,high-yield fabrication.The demonstration of high-performance quantum dot(QD)lasers monolithically grown on Si strongly forecasts its feasibility and enormous potential for on-chip lasers.The superior temperature-insensitive characteristics of the QD laser promote this design in large-scale high-density OEICs.The Germanium(Ge)-on-Si laser is also competitive for large-scale monolithic integration in the future.Compared with a III-V-based Si laser,the biggest potential advantage of a Ge-on-Si laser lies in its material and processing compatibility with Si technology.Additionally,the versatility of Ge facilitates photon emission,modulation,and detection simultaneously with a simple process complexity and low cost.

Application of high-precision temperature-controlled FBG filter and light source self-calibration technique in the BOTDR sensor system

A high-precision temperature-controlled narrow band-stop fiber Bragg grating （FBG） filter and light source self-calibration technique are proposed for application in the Brillouin optical time domain reflectometer （BOTDR） sensor system. With the proposed application, the BOTDR sensor system maintains good long-term stability and temperature precision through the reduction of the center wavelength drift in the FBG filters and corresponding decrease in the changes in light intensity. The experiment result shows that temperature precision of 1℃ and temperature stability of 0.7 ℃ can be achieved in a temperature sensor over a range of 8 km.

Light source system for high-precision flat-field correction and the calibration of an array detector

Signal distortion due to the non-uniform response of the detector degrades the measurement accuracy of most metrology instruments. In this Letter, we report a newly developed calibration source system for reference-based non-uniformity correction using a laser source, a fiber, and a diffusive module. By applying the Monte Carlo simulation, we show that the transmittance of the system highly depends on the cavity reflection of the diffusive module. We also demonstrate the use of this system to achieve a flat field at a very low non-uniformity （less than 0.2%） with proper illumination intensity, which most costly commercial integrating sphere systems traditionally cannot provide.