Laser shaping and optical power limiting of pulsed Laguerre–Gaussian laser beams of high-order radial modes in fullerene C60

We study the strong nonlinear optical dynamics of nanosecond pulsed Laguerre–Gaussian laser beams of high-order radial modes with zero orbital angular momentum propagating in the fullerene C60molecular medium. It is found that the spatiotemporal profile of the incident pulsed Laguerre–Gaussian laser beam is strongly reshaped during its propagation in the C60molecular medium. The centrosymmetric temporal profile of the incident pulse gradually evolves into a noncentrosymmetric meniscus shape, and the on-axis pulse duration is clearly depressed. Furthermore, the field intensity is distinctly attenuated due to the field-intensity-dependent reverse saturable absorption, and clear optical power limiting behavior is observed for different orders of the input pulsed Laguerre–Gaussian laser beams before the takeover of the saturation effect;the lower the order of the Laguerre–Gaussian beam, the lower the energy transmittance.

A Multi-mode Electronic Load Sensing Control Scheme with Power Limitation and Pressure Cut-off for Mobile Machinery

In mobile machinery,hydro-mechanical pumps are increasingly replaced by electronically controlled pumps to improve the automation level,but diversified control functions(e.g.,power limitation and pressure cut-off)are integrated into the electronic controller only from the pump level,leading to the potential instability of the overall system.To solve this problem,a multi-mode electrohydraulic load sensing(MELS)control scheme is proposed especially considering the switching stability from the system level,which includes four working modes of flow control,load sensing,power limitation,and pressure control.Depending on the actual working requirements,the switching rules for the different modes and the switching direction(i.e.,the modes can be switched bilaterally or unilaterally)are defined.The priority of different modes is also defined,from high to low:pressure control,power limitation,load sensing,and flow control.When multiple switching rules are satisfied at the same time,the system switches to the control mode with the highest priority.In addition,the switching stability between flow control and pressure control modes is analyzed,and the controller parameters that guarantee the switching stability are obtained.A comparative study is carried out based on a test rig with a 2-ton hydraulic excavator.The results show that the MELS controller can achieve the control functions of proper flow supplement,power limitation,and pressure cut-off,which has good stability performance when switching between different control modes.This research proposes the MELS control method that realizes the stability of multi-mode switching of the hydraulic system of mobile machinery under different working conditions.

Optical power limiting of ultrashort hyper-Gaussian pulses in cascade three-level system

Propagation of strong femtosecond hyper-Gaussian pulses in a cascade three-level molecular system is studied by solving numerically the Maxwell–Bloch equations by the iterative predictor-corrector finite-difference time-domain method.Optical power limiting behavior induced by strong nonlinear two-photon absorption is observed for different orders of the femtosecond hyper-Gaussian pulses. Pulses of a higher order temporal profile are found to have a wider power range of optical limiting but a larger output saturation intensity. Both the output saturation value and the damage threshold of optical power limiting decrease with pulse duration increasing. The decrease of the pulse area along the pulse propagation is much slower than that obtained from the two-photon area theorem due to invalidity of the slowly varying amplitude approximation and the monochromatic field hypothesis.

Flexible Power Regulation and Limitation of Voltage Source Inverters under Unbalanced Grid Faults

This paper develops a flexible power regulation and limitation strategy of voltage source inverters(VSIs)under unbalanced grid faults.When the classical power theory is used under unbalanced grid faults,the power oscillations and current distortions are inevitable.In the proposed strategy,the extended power theory is introduced to compute the power feedbacks together with the classical power theory.Based on the combination of the classical and extended power theory,the proposed strategy can achieve the sinusoidal current provision and the flexible regulation between three common targets,i.e.,constant active power,balanced current,and constant reactive power.Meanwhile,the proposed strategy is associated with a power limiter,which is capable to keep the currents under the pre-defined threshold and to compute the maximum apparent power for better utilization of the inverter capacity.With this power limiter,the rated inverter capacity is fully used for both the active and reactive power provisions under unbalanced grid faults.Using the proposed power regulation and limitation,the VSI can avoid overcurrent tripping and flexibly regulate its power under unbalanced grid faults.All the conclusions are verified by the real-time hardware-in-loop tests.

Analysis and design of over-current limit control strategies applied in aeronautical power supplies

Some Over-Current Limit Control strategies are analyzed and designed to meet the demands of high reliability and rapid dynamic response in the aeronautical power supply applications. The control schemes are both effective in DC-DC converters and DC-AC converters. Controller models are set up, and the over-current limit operation principles of analogy and digital control are analyzed too. An 800VA aeronautical power supply has been constructed to verify the performance of the proposed control strategy in various cases such as the sudden load change and the constant load. The analysis and experiments confirm the advantages of the proposed over-current limit strategies as follows: simple,effective and reliable.

Optimal Power Allocation with Limited Feedback of Channel State Information in Multi-User MIMO Systems

In this paper,an expression for the user’s achievable data rate in the multi-user multiple-input multiple-output(MU-MIMO)system with limited feedback(LF)of channel state information(CSI)is derived.The energy efficiency(EE)is optimized through power allocation under quality of service(QoS)constraints.Based on mathematical equivalence and Lagrange multiplier approach,an energy-efficient unequal power allocation(EEUPA)with LF of CSI scheme is proposed.The simulation results show that as the number of transmitting antennas increases,the EE also increases which is promising for the next generation wireless communication networks.Moreover,it can be seen that the QoS requirement has an effect on the EE of the system.Ultimately,the proposed EEUPA with LF of CSI algorithm performs better than the existing energy-efficient equal power allocation(EEEPA)with LF of CSI schemes.

Thiophene-fluorene derivatives with high three-photon absorption activities and their application to optical power limiting

The three-photon absorption （3PA） properties of two thiophene-fluorene derivatives （abbreviated as MOTFTBr and ATFTBr） have been determined by using a Q-switched Nd：YAG laser pumped with 38ps pulses at 1064nm in DMF. The measured 3PA cross-sections are 152×10^-78cm^6s^2 and 139× 10^-78cm^6s^2, respectively. The optimized structures were obtained by AM1 calculations and the results indicate that these two molecules show nonplanar structures, and attaching different donors has different effects on the molecular structure. The charge density distributions during the excitation were also systematically studied by using AM1 method. In addition, an obvious optical power limiting effect induced by 3PA has been demonstrated for both derivatives.

Micro-arc Oxidation Inverter Power Supply Based on the Limited Bipolar Soft-switch Control Method

In order to overcome many limitations of the conventional power supplies, such as ponderosity, big wastage, and simplex output characteristic, a dual-inverter power supply is designed to meet the different requirements of micro-arc oxidation. The main circuit structure and principle of the dual-inverter power supply for micro-arc oxidation is described, the control system and the control adjustment method are also introduced. The dual-inverter technology is adopted in micro-arc oxidation power supply. The limited bipolar control mode is applied in the power inverter circuit for adjusting the voltage, and various voltage waveform can be obtained by controlling the chopper circuit. Meanwhile, the control accuracy and response speed are improved greatly because of the higher inverter frequency. The power supply can output direct current（DC） waveform, DC pulse waveform, symmetry alternating current（AC） waveform, asymmetry AC waveform, and so on. Besides, the parameters such as pulse width, range, frequency, duty cycle can be adjusted. The experimental result shows that the power supply has many advantages, such as stable output, wonderful waveform consistency and obvious advantage in technique, and it can meet the requirements of micro-arc oxidation process fully.

A Novel Practical Cooperative Diversity Method for the Power-Limited Wireless Sensor Network

A novel practical cooperative diversity method for power-limited wireless sensor network system was proposed. At first, the system model was presented and the cooperation problem is formulated under the minimum outage probability criterion, then the focus was put on the power efficiency of system, such as the relay selection, cooperation strategy and power allocation etc. At last the uniform procedure of the proposed method was given. The results of the simulation clearly demonstrate that our method not only has the properties of simple operation and wide applying scope, but also outperforms those of current classical methods on the aspect of outage probability under the basis of the same power limitation.

Characterization and Optimization of Photonic Crystal Optical Power Limiters

In the work, there have been investigated the optical power limiting effects which occur in the nonlinear photonic crys-tals possessing saturable Kerr nonlinearity. The method is proposed which allows exact determination of the parame-ters of the structure as well as the radiation parameters which provide the limiting effect.

Effect of New Suggested Ferroresonance Limiter on the Stability Domain of Chaotic Ferroresonance in the Power Transformer with Linear Core Model

This Paper studies the effect of new suggested ferroresonance limiter on controlling ferroresonance oscillations in the power transformer. It is expected that this limiter generally can control the ferroresonance. For studying these phenomena, at first ferroresonance is introduced and a general modeling approach is given. A simple case of ferroresonance in a three phase transformer is used to illustrate these phenomena. Then, effect of new suggested ferroresonance limiter on the onset of chaotic ferroresonance and control of these oscillations in a power transformer including linear core losses is studied. Simulation is done on a three phase power transformer while one of its phases is opened, and effect of varying input voltage on occurring ferroresonance overvoltage is studied. Results show that connecting the ferroresonance limiter to the transformer exhibits a great controlling effect on the ferroresonance overvoltage. Phase plane diagram, FFT analysis along with bifurcation diagrams are also presented. Significant effect on occurring chaotic ferroresonance, the range of parameter values that may lead to overvoltage and magnitude of ferroresonance overvoltage is obtained, showed and tabulated.

基于光储混合配置的级联H桥型光伏逆变器功率平衡策略

级联H桥(cascade H-bridge,CHB)变换器由于其模块化结构,已成为大规模光伏(photovoltaic,PV)并网逆变器的优选方案。然而,在不同光照强度和温度下,不同区域PV组件之间发电功率不同,导致CHB变换器相间输出功率不均衡、不稳定等问题。为此,文中提出一种基于CHB结构的光储混合电能路由,在三相CHB光伏逆变器中配置少量的储能模块,利用光储协同控制,维持CHB内部功率稳定,消除分布式PV在相间产生的不均衡功率,且变换器输出功率能够时刻满足网侧上层功率调度,提高了光伏电站的稳定性。针对系统安全区域,在载波移相调制策略下,全桥子模块传输的功率受到约束,并对光伏和储能模块的配置作详细分析。最后,通过仿真以及实验验证所提拓扑及控制策略的正确性和有效性。

The Continuation Power Flow Considering Both Generator Excitation Current Limits and Armature Current Limits

在传统连续潮流算法中,发电机无功限制采用定上、下限值来处理,随着有功负荷增加,无功限值通常不变,得到的电压稳定裕度偏大。根据同步发电机的无功出力特性,提出同时计及发电机励磁电流约束和电枢电流约束的连续潮流模型和方法。当相应参数越限时,将发电机节点转换为励磁恒定模型或者电枢电流恒定模型进行计算。所提PV、PEq、PIa节点类型双向转换逻辑可在潮流迭代内进行发电机限制模式的转换,模拟实际系统无功能力的变化。分岔点类型识别模块可以识别崩溃点类型及关键约束。通过新英格兰39节点算例的仿真,证明所提算法是有效的。

光伏发电系统容配比与功率限值整定方法

为在保证系统可靠运行的前提下实现光伏发电系统发电量最大化,提出一种以光伏发电系统度电成本为目标的容配比与变功率限值整定方法,分析容配比和变功率限值对光伏逆变器可靠性以及系统发电量的影响规律,建立考虑功率器件寿命的光伏发电系统容配比与功率限值参数优化整定模型,并利用启发式算法进行模型求解。最后,不同纬度地区的算例分析结果验证所提整定方法的有效性。

Feasibility Limits for a Hybrid System with Ocean Wave and Ocean Current Power Plants in Southern Coast of Brazil

Some types of renewable energy have been experiencing rapid evolution in recent decades, notably among the energies associated with the oceans, such as wave and current energies. The development of new energy conversion technologies for these two forms of energy has been offering a large number of equipment configurations and plant geometries for energy conversion. This process can be implemented aiming at the result of feasibility studies in places with energy potentials, establishing minimum feasibility limits to be reached. This work aims to contribute in this sense with a feasibility study of a system with ocean wave power plants and with socio-current power plants to be operated on the southern coast of Brazil. This study evaluates a hybrid system with contributions from energy supplies obtained from wave plants and current plants, connected to the grid and supplying the demand of the municipalities in the North Coast region of the State of Rio Grande do Sul, the southernmost state of Brazil. The study was carried out with simulations with the Homer Legacy software, with some adaptations for the simulation of ocean wave plants and ocean current plants. The results indicate that the ocean wave power plants were viable in the vast majority of simulated scenarios, while the ocean current power plants were viable in the scenarios with more intense average ocean current speeds and with more expensive energy acquired from the interconnected system.