Lateral earth pressure of granular backfills on retaining walls with expanded polystyrene geofoam inclusions under limited surcharge loading

Existing studies have focused on the behavior of the retaining wall equipped with expanded polystyrene(EPS)geofoam inclusions under semi-infinite surcharge loading rather than limited surcharge loading.In this paper,the failure mode and the earth pressure acting on the rigid retaining wall with EPS geofoam inclusions and granular backfills(henceforth referred to as EPS-wall),under limited surcharge loading are investigated through two-and three-dimensional model tests.The testing results show that different from the sliding of almost all the backfill in the EPS-wall under semi-infinite surcharge loading,only an approximately triangular backfill slides in the wall under limited surcharge loading.The distribution of the lateral earth pressure on the EPS-wall under limited surcharge loading is non-linear,and the distribution changes from the increase of the wall depth to the decrease with the increase of the limited surcharge loading.An approach based on the force equilibrium of a differential element is developed to predict the lateral earth pressure behind the EPS-wall subjected to limited surcharge loading,and its performance was fully validated by the three-dimensional model tests.

A Stroke-Limitation AMD Control System with Variable Gain and Limited Area for High-Rise Buildings

Collisions between a moving mass and an anti-collision device increase structural responses and threaten structural safety.An active mass damper(AMD)with stroke limitations is often used to avoid collisions.However,a strokelimited AMD control system with a fixed limited area shortens the available AMD stroke and leads to significant control power.To solve this problem,the design approach with variable gain and limited area(VGLA)is proposed in this study.First,the boundary of variable-limited areas is calculated based on the real-time status of the moving mass.The variable gain(VG)expression at the variable limited area is deduced by considering the saturation of AMD stroke.Then,numerical simulations of a stroke-limited AMD control system with VGLA are conducted on a high-rise building structure.These numerical simulations show that the proposed approach has superior strokelimitation performance compared with a stroke-limited AMD control system with a fixed limited area.Finally,the proposed approach is validated through experiments on a four-story steel frame.

Exploring device physics of perovskite solar cell via machine learning with limited samples

Perovskite solar cells(PsCs)have developed tremendously over the past decade.However,the key factors influencing the power conversion efficiency(PCE)of PSCs remain incompletely understood,due to the complexity and coupling of these structural and compositional parameters.In this research,we demon-strate an effective approach to optimize PSCs performance via machine learning(ML).To address chal-lenges posed by limited samples,we propose a feature mask(FM)method,which augments training samples through feature transformation rather than synthetic data.Using this approach,squeeze-and-excitation residual network(SEResNet)model achieves an accuracy with a root-mean-square-error(RMSE)of 0.833%and a Pearson's correlation coefficient(r)of 0.980.Furthermore,we employ the permu-tation importance(PI)algorithm to investigate key features for PCE.Subsequently,we predict PCE through high-throughput screenings,in which we study the relationship between PCE and chemical com-positions.After that,we conduct experiments to validate the consistency between predicted results by ML and experimental results.In this work,ML demonstrates the capability to predict device performance,extract key parameters from complex systems,and accelerate the transition from laboratory findings to commercialapplications.

Leaf nitrogen resorption is more important than litter nitrogen mineralization in mediating the diversity–productivity relationship along a nitrogen-limited temperate forest succession chronosequence

The resorption of nutrients by plants before litter fall and the mineralization of nutrients from plant litter by soil processes are both important pathways supporting primary productivity. While the positive relationship between plant biodiversity and primary productivity is widely accepted for natural ecosystems, the roles of nutrient resorption and mineralization in mediating that relationship remains largely unknown. Here, we quantified the relative importance of nitrogen(N) resorption and N mineralization in driving plant community N investment and the correlation between species diversity and community productivity along an N-limited successional chronosequence of the mixed broadleaved–Korean pine(Pinus koraiensis) forest in northeastern China. Leaf N resorption efficiency(NRE) at the community level increased significantly along the successional chronosequence,whereas litter N mineralization rate decreased significantly. Leaf NRE was more important than litter N mineralization rate in driving the diversity–productivity relationship. However, higher leaf NRE led to less N mineralization as succession progressed along the chronosequence. Our results highlight the importance of the N resorption pathway rather than the N mineralization pathway for forest N acquisition with community succession,and they provide mechanistic insights into the positive effects of biodiversity on ecosystem functioning. In future forest management practices, we recommend appropriate application of N fertilizer to mitigate the adverse effects of N-poor soil on seedling regeneration during late succession and thus maintain the sustainable development of temperate forest ecosystems.

Access to novel anti-diabetic agents in resource limited settings:A brief commentary

The prevalence of diabetes mellitus is increasing in resource limited settings.Simultaneously,there has been an increase in the number of novel therapies for the management of diabetes mellitus.However,use of novel antidiabetic therapies is limited because of major market access challenges in resource limited settings.Niching products to those patients with the highest absolute risk for major adverse cardiovascular outcomes,and thus most likely to benefit from the therapy,are less likely to have negative budget impact for funders.To improve access,and reduce morbidity and mortality,requires alignment amongst key stakeholders including patient advocacy groups,health care professional councils,national departments of health,the pharmaceutical industry,treasury and finance departments.

Exclusive Fibula Osteosynthesis for Treating Open Fractures Gustillo I-III B of the Distal Half of the Leg Bones in a Resources-Limited Setting

Introduction: Management of open leg bones fractures is a challenging health issue for the surgeon, particularly true in resource-limited settings. In this study, we evaluate exclusive fibular osteosynthesis in the treatment of open fractures of the distal half of the leg bones as a therapeutic option in our context. Methods: This is a prospective, experimental, multicenter study of 30 open fractures of the distal half of the leg bones treated with exclusive fibula osteosynthesis, conducted in 3 hospitals in the DRC from January 1, 2013 to September 30, 2016. Results: The age range of 20 to 40 years grouped 22 (73.4%) patients, the sex ratio was 1:1 and the unemployed were the most involved with 16 (53.3%) cases. The Gustilo II, I, III B and III A types represented 40%, 33.3%, 20% and 6.7%, respectively. The fractures were located in the distal third in 12 (40%) cases, in the middle third in 11 (36.7%) cases, and in both malleoli in 7 cases (23.3%). Osteosynthesis of the fibula by screw plate was applied in 22 (73.3%) patients and pinning in 8 (26.7%). Satisfactory reduction of the tibial fracture site was achieved in 29 (96.7%) cases and 100% bone healing was achieved within an average of 10 weeks. Four (13.3%) loss of alignment, 1 (3.3%) infection, 1 (3.3%) skin necrosis and 2 (6.7%) ankle stiffness complicated our fractures. Conclusion: Exclusive osteosynthesis of the fibula as a common technique for fractures of the distal half of the leg bones allowed us to reduce, immobilize and consolidate the tibial fracture in the required time and to preserve the mobility of the ankle.

The influence of inter-band rock on rib spalling in longwall panel with large mining height

In order to improve rib stability,failure criteria and instability mode of a thick coal seam with inter-band rock layer are analysed in this study.A three-dimensional mechanical model is established for the rib by considering the rock layer.A safety factor is defined foy the rib,and it is observed that the safety factor exhibits a positive correlation with the thickness and strength of the inter-band rock.A calculation method for determining critical parameters of the rock layer is presented to ensure the rib stability.It is revealed that incomplete propagation of the fracture at the hard rock constitutes a fundamental prerequisite for ensuring the rib stability.The influence of the position of the inter-band rock in the coal seam on failure mechanism of the rib was thoroughly investigated by developing a series of physical models for the rib at the face area.The best position for the inter-band rock in the coal seam is at a height of 1.5 m away from the roof line,which tends to provide a good stability state for the rib.For different inter-band rock positions,two ways of controlling rib by increasing supports stiffness and flexible grouting reinforcement are proposed.

Effect of eccentric and inclined loading on the bearing capacity of strip footing placed on rock mass

This paper deals with the bearing capacity determination of strip footing on a rock mass in hilly area by considering the influence of inclined and eccentric loading. Applying the generalized HoekBrown failure criterion, the failure behavior of the rock mass is modeled with the help of the power cone programming in the lower bound finite element limit analysis framework. Using bearing capacity factor(Ns), the change in bearing capacity of the strip footing due to the occurrence of eccentrically inclined loading is presented. The variations of the magnitude of Ns are obtained by examining the effects of the Hoek-Brown rock mass strength parameters(uniaxial compressive strength(sci), disturbance factor(D), rock parameter(mi), and Geological Strength Index(GSI)) in the presence of different magnitudes of eccentricity(e) and inclination angle(λ) with respect to the vertical plane, and presented as design charts. Both the inclined loading modes, i.e., inclination towards the center of strip footing(+λ) and inclination away from the center of strip footing(-λ), are adopted to perform the investigation. In addition, the correlation between the input parameters and the corresponding output is developed by utilizing the artificial neural network(ANN). Additionally, from sensitivity analysis, it is observed that inclination angle(λ) is the most sensitive parameter. For practicing engineers, the obtained design equation and design charts can be beneficial to understand the bearing capacity variation in the existence of eccentrically inclined loading in mountain areas.

A Recursive Algorithm for Offspring's Genotype Frequency of Selfing Population on Multiple Alleles with Limited Loci

This paper studies the offspring＇s genotype frequency of the selfing population on multiple alleles with limited loci.A recursive algorithm is given for it.It is discovered that the genotype frequency of homozygous gene of limited loci increases by generations.Relative increment reduces by generations and the genotype frequency tends to a definite value finally.The genotype frequency of limited loci with hybrid gene tends to 0 finally.But it is possibility that the genotype frequency increases in previous generations then reduces later.It is found that the number of the hybrid gene are more,the speeds tending to 0 are quicker.

Proper interpretation of sectional analysis results

Displacement control algorithms commonly used to evaluate axial force-bending moment(PM)diagrams may lead to incorrect interpretations of the strength envelopes for asymmetric sections.This paper aims to offer valuable insights by comparing existing displacement control algorithms with a newly proposed force control algorithm.The main focus is on the PM diagrams of three example sections that exhibit varying degrees of asymmetry.The comparative study indicates that conventional displacement control algorithms inevitably introduce non-zero out-of-plane bending moments.The reported PM diagram in such cases erroneously neglects the out-of-plane moment and fails to represent the strength envelope accurately.This oversight results in significant and unconservative errors when verifying the strength of asymmetric sections.

Performance Limits and Advancements in Single 2D Transition Metal Dichalcogenide Transistor

Two-dimensional(2D)transition metal dichalcogenides(TMDs)allow for atomic-scale manipulation,challenging the conventional limitations of semiconductor materials.This capability may overcome the short-channel effect,sparking significant advancements in electronic devices that utilize 2D TMDs.Exploring the dimension and performance limits of transistors based on 2D TMDs has gained substantial importance.This review provides a comprehensive investigation into these limits of the single 2D-TMD transistor.It delves into the impacts of miniaturization,including the reduction of channel length,gate length,source/drain contact length,and dielectric thickness on transistor operation and performance.In addition,this review provides a detailed analysis of performance parameters such as source/drain contact resistance,subthreshold swing,hysteresis loop,carrier mobility,on/off ratio,and the development of p-type and single logic transistors.This review details the two logical expressions of the single 2D-TMD logic transistor,including current and voltage.It also emphasizes the role of 2D TMD-based transistors as memory devices,focusing on enhancing memory operation speed,endurance,data retention,and extinction ratio,as well as reducing energy consumption in memory devices functioning as artificial synapses.This review demonstrates the two calculating methods for dynamic energy consumption of 2D synaptic devices.This review not only summarizes the current state of the art in this field but also highlights potential future research directions and applications.It underscores the anticipated challenges,opportunities,and potential solutions in navigating the dimension and performance boundaries of 2D transistors.

Charge transport properties and variable photo-switching of three-terminal Cs_(2)AgBiBr_(6)device

In this study,we present an in-depth exploration of charge transport phenomena and variable photo-switching characteristics in a novel double-perovskite-based three-terminal device.The Cs_(2)AgBiBr_(6)thin film(TF)was synthesized through a three-step thermal evaporation process followed by precise open-air annealing,ensuring superior film quality as confirmed by structural and morphological characterizations.Photoluminescence spectroscopy revealed distinct emissions at 2.28 and 2.07 eV,indicative of both direct and indirect electronic transitions.Our device exhibited space-charge limited current(SCLC)behaviour beyond 0.35 V,aligning with the relationship Current(I)∝Voltage(V)^(m),where the exponent m transitioned from≤1 to>1.Detailed analysis of Schottky parameters within the trap-filled limit(TFL)regime was conducted,accounting for variations in temperature and optical power.Significantly,the self-powered photodetector demonstrated outstanding performance under illumination.The sensitivity of the device was finely tunable via the applied bias voltages at the third terminal.Notably,an optimal bias voltage of±100μV yielded maximum responsivity(R)of 0.48 A/W and an impressive detectivity(D*)of 1.07×10^(9)Jones,highlighting the potential of this double-perovskite-based device for advanced optoelectronic applications.

A Bayesian multi-model inference methodology for imprecise momentindependent global sensitivity analysis of rock structures

Traditional global sensitivity analysis(GSA)neglects the epistemic uncertainties associated with the probabilistic characteristics(i.e.type of distribution type and its parameters)of input rock properties emanating due to the small size of datasets while mapping the relative importance of properties to the model response.This paper proposes an augmented Bayesian multi-model inference(BMMI)coupled with GSA methodology(BMMI-GSA)to address this issue by estimating the imprecision in the momentindependent sensitivity indices of rock structures arising from the small size of input data.The methodology employs BMMI to quantify the epistemic uncertainties associated with model type and parameters of input properties.The estimated uncertainties are propagated in estimating imprecision in moment-independent Borgonovo’s indices by employing a reweighting approach on candidate probabilistic models.The proposed methodology is showcased for a rock slope prone to stress-controlled failure in the Himalayan region of India.The proposed methodology was superior to the conventional GSA(neglects all epistemic uncertainties)and Bayesian coupled GSA(B-GSA)(neglects model uncertainty)due to its capability to incorporate the uncertainties in both model type and parameters of properties.Imprecise Borgonovo’s indices estimated via proposed methodology provide the confidence intervals of the sensitivity indices instead of their fixed-point estimates,which makes the user more informed in the data collection efforts.Analyses performed with the varying sample sizes suggested that the uncertainties in sensitivity indices reduce significantly with the increasing sample sizes.The accurate importance ranking of properties was only possible via samples of large sizes.Further,the impact of the prior knowledge in terms of prior ranges and distributions was significant;hence,any related assumption should be made carefully.

Temperature Characteristics of Bilayer Thin-Film Devices Under Organic Interface Limited Current Conduction

Temperature characteristics are important for the performance of organic thin film devices. On the basis of the hopping theory of Miller-Abrahams,an analytical model of charge transport for bilayer organic devices under the organicorganic interface limited current conduction is developed. The dependence of current, field,and carrier distribution in bilayer organic devices with the structure of ＂injection electrode/Layer Ⅰ/Layer Ⅱ/collection electrode＂ on temperature are numerically analyzed. We conclude that, for a given applied voltage, when temperature is raised, the voltage of LayerⅠ will increase,and the field will be higher. Meanwhile, the voltage of Layer Ⅲ will decrease, the field will become weaker accordingly,and the current of the device will increase.

Seismic-induced surficial failure of cohesive slopes using three-dimensional limit analysis:A case study of the Wangjiayan landslide in Beichuan, China

A seismic-induced landslide is a common geological catastrophe that occurs in nature.The Wangjiayan landslide,which was triggered by the Wenchuan earthquake,is a typical case in point.The Wanjiayan landslide caused many casualties and resulted in enormous property loss.This study constructs a simple surficial failure model based on the upper bound approach of three-dimensional(3D)limit analysis to evaluate the slope stability of the Wangjiayan case,while a traditional two-dimensional(2D)analysis is also conducted as a reference for comparison with the results of the 3D analysis.A quasi-static calculation is used to study the effect of the earthquake in terms of horizontal ground acceleration,while a parametric study is conducted to evaluate the critical cohesion of slopes.Rather than employing a 3D analysis,using the 2D analysis yields an underestimation regarding the safety factor.In the Wangjiayan landslide,the difference in the factors of safety between the 3D and 2D analyses can reach 20%.The sliding surface morphology as determined by the 3D method is similar to actual morphology,and the parameters of both are also compared to analyze the reliability of the proposed 3D method.

Supplementary Information to“Balancing the quantum speed limit and instantaneous energy cost in adiabatic quantum evolution”

I.SUPPLEMENTARY NOTE 1:THEORETICAL MATERIALS.The quantum speed limit(QSL)is essential for quantum computing and quantum communication,referring to the minimum time required for a quantum system to evolve from one state to another.Two well-known forms of the QSL are the Mandelstam-Tamm(MT)relation TqsL≥πh/2△E[S1]and the Margolus-Levitin(ML)relation TqsL≥πh/2(E)[S2]where Tqst is denoted as the QSL time,h is the reduced Planck's constant,△E is the energy uncertainty(standard deviation)of the system,and(E)is the average energy of the system above its ground state.Both of relations provide a lower bound on the evolution time.

Roof collapse mechanism of weak surrounding rock for deep-buried tunnels under high geostress conditions

High geostress,a typical attribute of tunnels located at significant depths,is crucial in causing stress-induced failure and influencing the stability of the tunnel crown.This study developed an analytical method for the failure mechanism that occurs in deep-buried tunnel roofs,taking into account the influence of geostress.The limit analysis theory was utilized for deriving analytical solutions about the geometry of the collapsing surface and the limit supporting pressure.The collapsing surface obtained by the analytical solution was validated by the findings of the physical model test,which shows a high level of agreement with the actual one.An extensive investigation was done to explore the effects of the lateral pressure coefficients,the tunnel buried depth,the geological conditions of the surrounding rock,the long-short axis ratio,and the size of the tunnel profile.The findings indicate that an increase in the lateral pressure coefficient from 0.5 to 1.5 results in a reduction in the height of the collapsing zone by 2.08 m and the width of the collapsing zone by 1.15 m,while simultaneously increases the limit supporting pressure by 18.9%.The proposed upper bound method accurately determines the limit supporting pressure and the geometry of the collapsing surface,which aligns well with the results acquired through numerical modelling and on-site monitoring in actual engineering applications.The proposed analytical method can serve as a reference for similar crown failure issues of deep-buried tunnels.

Cosmology-Independent Photon Mass Limits from Localized Fast Radio Bursts by Using Artificial Neural Networks

A hypothetical photon mass m_(γ) can produce a frequency-dependent vacuum dispersion of light, which leads to an additional time delay between photons with different frequencies when they propagate through a fixed distance. The dispersion measure and redshift measurements of fast radio bursts(FRBs) have been widely used to constrain the rest mass of the photon. However, all current studies analyzed the effect of the frequency-dependent dispersion for massive photons in the standard ΛCDM cosmological context. In order to alleviate the circularity problem induced by the presumption of a specific cosmological model based on the fundamental postulate of the masslessness of photons, here we employ a new model-independent smoothing technique, artificial neural network(ANN), to reconstruct the Hubble parameter H(z) function from 34 cosmic-chronometer measurements.By combining observations of 32 well-localized FRBs and the H(z) function reconstructed by ANN, we obtain an upper limit of m_(γ) ≤ 3.5 × 10^(-51)kg, or equivalently m_(γ) ≤ 2.0 × 10^(-15)eV/c^(2)(m_(γ) ≤ 6.5 × 10^(-51)kg, or equivalently m_(γ) ≤ 3.6 × 10^(-15)eV/c_(2)) at the 1σ(2σ) confidence level. This is the first cosmology-independent photon mass limit derived from extragalactic sources.

THE LIMIT CYCLE BIFURCATIONS OF A WHIRLING PENDULUM WITH PIECEWISE SMOOTH PERTURBATIONS

This paper deals with the problem of limit cycles for the whirling pendulum equation x=y,y=sin x(cosx-r)under piecewise smooth perturbations of polynomials of cos x,sin x and y of degree n with the switching line x=0.The upper bounds of the number of limit cycles in both the oscillatory and the rotary regions are obtained using the Picard-Fuchs equations,which the generating functions of the associated first order Melnikov functions satisfy.Furthermore,the exact bound of a special case is given using the Chebyshev system.At the end,some numerical simulations are given to illustrate the existence of limit cycles.

Theoretical Models on Interfacial Thermal Conductance of Nanoscale Solid Interfaces in Chips:A Mini Review

With the rapid increase in power density of electronic devices,thermal management has become urgent for the electronics industry.Controlling temperature in the back-end-of-line is crucial for maintaining the reliability of integrated circuits,where many atomic-scale interfaces exist.The theoretical models of interface thermal conductance not only accurately predict the values but also help to analyze the underlying mechanism.This review picks up and introduces some representative theoretical models considering interfacial roughness,elastic and inelastic processes,and electron–phonon couplings,etc.Moreover,the limitations and problems of these models are also discussed.