期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Performance of a single-stage Linde-Hampson refrigerator operating with binary refrigerants at the temperature level of-60°C 被引量:8
1
作者 Qin WANG Kang CUI +2 位作者 Teng-fei SUN Fu-sheng CHEN Guang-ming CHEN 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2010年第2期115-127,共13页
The optimization of the performance of a single-stage Linde-Hampson refrigerator (LHR) operating with six different binary refrigerants (R23/R134a, R23/R227ea, R23/R236ea, R170/R290, R170/R600a and R170/R600) with... The optimization of the performance of a single-stage Linde-Hampson refrigerator (LHR) operating with six different binary refrigerants (R23/R134a, R23/R227ea, R23/R236ea, R170/R290, R170/R600a and R170/R600) with ozone depletion potentials (ODPs) of zero was conducted using a new approach at the temperature level of-60℃. Among these binary refrig- erants, the 0.55 and the 0.6 mole fractions of R23 for R23/R236ea are the most prospective nonflammable ones for the medium and low suction pressure compressors, respectively. For these two kinds of compressors, the 0.6 and the 0.65 mole fractions of R170 for R 170/R600, respectively, are the most prospective binary refrigerants with low global warming potentials (GWPs). The results of optimization of pressure levels indicate that the optimum low pressure value for coefficients of performance (COP) is achieved when the minimum temperature differences occur at both the hot and the cold ends of the recuperator at a specified composition and pressure ratio. Two useful new parameters, the entropy production per unit heat recuperated and the ratio of heat recuperating capacity to the power consumption of the compression, were introduced to analyze the exergy loss ratio in the recuperator. The new approach employed in this paper also suggests a promising application even to the optimization of the performance with multi-component refrigerants. 展开更多
关键词 linde-hampson Binary refrigerant REFRIGERATOR PERFORMANCE Optimization
原文传递
一种-60℃制冷机的实验研究 被引量:6
2
作者 张爱民 王勤 +1 位作者 陈光明 雷令军 《流体机械》 CSCD 北大核心 2007年第5期54-57,共4页
应用R23/R600a混合工质在Linde-Hampson循环下进行了实验研究。通过改变工质成分和运行压比,得到了不同工况下的最低温度以及在保持箱温-60℃时的COP,在得到制冷机良好性能的同时,研究了不同成分和压比对循环的热力学性能的影响规律。
关键词 混合工质 R23/R600a linde-hampson循环 COP
下载PDF
混合工质用于单级压缩制冷回热循环的理论研究与分析 被引量:8
3
作者 吴裕庆 张华 《低温与超导》 CAS CSCD 北大核心 2010年第1期37-40,43,共5页
主要利用NIST8.0软件,针对R23/R134 a,R23/R600 a,R23/R125,R23/R14等二元混合工质在Linde-Hampson循环下进行了理论分析,设计一套可制得-60℃的单级压缩节流回热循环系统。通过对工质成分特性分析对比,研究其对循环的热力学性能的影响... 主要利用NIST8.0软件,针对R23/R134 a,R23/R600 a,R23/R125,R23/R14等二元混合工质在Linde-Hampson循环下进行了理论分析,设计一套可制得-60℃的单级压缩节流回热循环系统。通过对工质成分特性分析对比,研究其对循环的热力学性能的影响规律,得到了最佳制冷剂组合。 展开更多
关键词 R23/R600a linde-hampson循环 单级压缩 回热循环
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部