Doppler radar by using single multicarrier pulse based on optical fibre delay lines

The proposed Doppler measurement technique shows that the Doppler measurements can be accomplished by a single pulse with multiple frequency components through optical fibre delay lines.Range and velocity ambiguity can be removed,and the velocity resolution can be improved dramatically by using long optical fibre delay lines.Furthermore,the velocity resolution can be modified by adjusting the length of optical fibre delay lines.In addition,the proposed radar can achieve high range resolution by using a single wideband pulse.As a result,the new approach can improve radar performance significantly.

THE EXACT SOLUTIONS OF ELASTIC－PLASTIC CRACK LINE FIELD FOR MODE Ⅱ PLANE STRESS CRACK

The near crack line field analysis method has been used io investigate into theexact elastic-plastic solutions of a mode II crack under plane stress condilion in anelastic-perfectly plastic solid. The assumptions of the usual small scale yielding theory.hare been completely. dbandoned and the correct formulations of matching conditionsat the elaslic-plastic boundary. have been given. By, matching the general solution ofthe plastic slress field (bul not the special solution used to be adopted) with the exactelastic stress field (but not the crack tip K-dominant field) at the elastic-plasticboundary, near the crack line, the plastic stresses. the length of the plastic =one and theunit normal vector of the elastic-plastic boundary.which are sufficiently precise near the crack line region ,have been given.

THE EXACT SOLUTIONS OF ELASTIC－PLASTIC CRACK LINE FIELD FOR MODE Ⅱ PLANE STRESS CRACK

The near crack line field analysis method has been used to investigate into the exact elastic-plastic solutions of a mode Ⅱ crack under plane stress condition in anelastic-perfectly plastic solid. The assumptions of the usual small scale yielding theoryhave been completely. dbandoned and the correct .formulations of matching conditionsat the elastic-plastic boundary have been given. By matching the general solution of the plastic stress field (but not the special solution used to be adopted) will the exactelastic stress field (but not the crack tip K-dominant field) at the elastic-plasticboundary. near the crack line, the plastic .stresses, the length of the plastic zone and theunit normal vector of the elaslic-plastic boundary. which sufficiently precise nearthe crack line region, hare been given.

Content Addressable Memory Using Automatic Charge Balancing with Self-Control Mechanism and Master-Slave Match Line Design

Content Addressable Memory (CAM) is a type of memory used for high-speed search applications. Due to parallel comparison feature, the CAM memory leads to large power consumption which is caused by frequent pre-charge or discharge of match line. In this paper, CAM for automatic charge balancing with self-control mechanism is proposed to control the voltage swing of ML for reducing the power consumption of CAM. Another technique to reduce the power dissipation is to use MSML, it combines the master-slave architecture with charge minimization technique. Unlike the conventional design, only one match line (ML) is used, whereas in Master-Slave Match Line (MSML) one master ML and several slave MLs are used to reduce the power dissipation in CAM caused by match lines (MLs). Theoretically, the match line (ML) reduces the power consumption up to 50% which is independent of search and match case. The simulation results using Cadence tool of MSML show the reduced power consumption in CAM and modified CAM cell.

High-power and high optical conversion efficiency diode-end-pumped laser with multi-segmented Nd：YAG/Nd：YVO-4

A novel flat-flat resonator consisting of two crystals（Nd：YAG ＋ Nd：YVO4） is established for power scaling in a diode-end-pumped solid-state laser. We systematically compare laser characteristics between multi-segmented（Nd：YAG ＋ Nd：YVO4） and conventional composite（Nd：YAG ＋ Nd：YAG） crystals to demonstrate the feasibility of spectral line matching for output power scale-up in end-pumped lasers. A maximum continuous-wave output power of 79.2 W is reported at 1064 nm, with Mx2= 4.82, My2= 5.48, and a pumping power of 136 W in the multi-segmented crystals（Nd：YAG ＋ Nd：YVO4）. Compared to conventional composite crystals（Nd：YAG ＋ Nd：YAG）, the optical-optical conversion efficiency of multi-segmented crystals（Nd：YAG ＋ Nd：YVO4） from 808 nm to 1064 nm is enhanced from 30% to 58.8%,while the laser output sensitivity as affected by the diode-laser temperature is reduced from 55% to 9%.

Data Intelligent Low Power High Performance TCAM for IP-Address Lookup Table

This paper represents current research in low-power Very Large Scale Integration (VLSI) domain. Nowadays low power has become more sought research topic in electronic industry. Power dissipation is the most important area while designing the VLSI chip. Today almost all of the high speed switching devices include the Ternary Content Addressable Memory (TCAM) as one of the most important features. When a device consumes less power that becomes reliable and it would work with more efficiency. Complementary Metal Oxide Semiconductor (CMOS) technology is best known for low power consumption devices. This paper aims at designing a router application device which consumes less power and works more efficiently. Various strategies, methodologies and power management techniques for low power circuits and systems are discussed in this research. From this research the challenges could be developed that might be met while designing low power high performance circuit. This work aims at developing Data Aware AND-type match line architecture for TCAM. A TCAM macro of 256 × 128 was designed using Cadence Advanced Development Environment (ADE) with 90 nm technology file from Taiwan Semiconductor Manufacturing Company (TSMC). The result shows that the proposed Data Aware architecture provides around 35% speed and 45% power improvement over existing architecture.