The scaled boundary finite element method (SBFEM) is a recently developed numerical method combining advantages of both finite element methods (FEM) and boundary element methods (BEM) and with its own special fe...The scaled boundary finite element method (SBFEM) is a recently developed numerical method combining advantages of both finite element methods (FEM) and boundary element methods (BEM) and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors (SIFs) directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.展开更多
Microstructure and mechanical properties of lost foam cast aluminum alloys have been investigated in both primary A356(0.13% Fe) and secondary 356(0.47%). As expected, secondary 356 shows much higher content of Fe-ric...Microstructure and mechanical properties of lost foam cast aluminum alloys have been investigated in both primary A356(0.13% Fe) and secondary 356(0.47%). As expected, secondary 356 shows much higher content of Fe-rich intermetallic phases, and in particular the porosity in comparison with primary A356. The average area percent and size(length) of Fe-rich intermetallics change from about 0.5% and 6 μm in A356 to 2% and 25 μm in 356 alloy. The average area percent and maximum size of porosity also increase from about 0.4% and 420 μm to 1.4% and 600 μm, respectively. As a result, tensile ductility decreases about 60% and ultimate tensile strength declines about 8%. Lower fatigue strength was also experienced in the secondary 356 alloy. Low cycle fatigue(LCF) strength decreased from 187 MPa in A356 to 159 MPa in 356 and high cycle fatigue(HCF) strength also declined slightly from 68 MPa to 64 MPa.展开更多
基金The project supported by the National Natural Science Foundation of China (50579081)the Australian Research Council (DP0452681)The English text was polished by Keren Wang
文摘The scaled boundary finite element method (SBFEM) is a recently developed numerical method combining advantages of both finite element methods (FEM) and boundary element methods (BEM) and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors (SIFs) directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.
文摘Microstructure and mechanical properties of lost foam cast aluminum alloys have been investigated in both primary A356(0.13% Fe) and secondary 356(0.47%). As expected, secondary 356 shows much higher content of Fe-rich intermetallic phases, and in particular the porosity in comparison with primary A356. The average area percent and size(length) of Fe-rich intermetallics change from about 0.5% and 6 μm in A356 to 2% and 25 μm in 356 alloy. The average area percent and maximum size of porosity also increase from about 0.4% and 420 μm to 1.4% and 600 μm, respectively. As a result, tensile ductility decreases about 60% and ultimate tensile strength declines about 8%. Lower fatigue strength was also experienced in the secondary 356 alloy. Low cycle fatigue(LCF) strength decreased from 187 MPa in A356 to 159 MPa in 356 and high cycle fatigue(HCF) strength also declined slightly from 68 MPa to 64 MPa.