Numerical investigation of multi-beam laser heterodyne measurement with ultra-precision for linear expansion coefficient of metal based on oscillating mirror modulation

This paper proposes a novel method of multi-beam laser heterodyne measurement for metal linear expansion coefficient. Based on the Doppler effect and heterodyne technology, the information is loaded of length variation to the frequency difference of the multi-beam laser heterodyne signal by the frequency modulation of the oscillating mirror, this method can obtain many values of length variation caused by temperature variation after the multi-beam laser heterodyne signal demodulation simultaneously. Processing these values by weighted-average, it can obtain length variation accurately, and eventually obtain the value of linear expansion coefficient of metal by the calculation. This novel method is used to simulate measurement for linear expansion coefficient of metal rod under different temperatures by MATLAB, the obtained result shows that the relative measurement error of this method is just 0.4%.

Superplastic forming of Ti6Al4V alloy using ZrO_(2)-TiO_(2) ceramic die with adjustable linear thermal expansion coefficient

Firstly,the relation between the coefficient of thermal expansion(CTE)and the volume fraction of TiO_(2) was investigated, and also the influence of relative density of ceramic on the CTE was studied.The results show that the volume fraction of TiO_(2) and the relative density both make influence on the CTE of ZrO_(2)-TiO_(2) ceramic.According to the results,the ZrO_(2)-TiO_(2)(volume fraction of TiO_(2) is 27%)ceramic die with the similar CTE(8.92×10^(-6) ℃^(-1))to Ti6Al4V was fabricated.Secondly,to evaluate the dimensional accuracy of the workpiece superplastically formed,the Ti6Al4V impression experiment was performed.The result shows that the dimensional inaccuracy of workpiece is 0.003.Thirdly,in order to evaluate the practicability,the experiment of superplastic forming Ti6Al4V using ZrO_(2)-TiO_(2) cylinder ceramic die was carried out.The Ti6Al4V cylinder shows good shape retention and surface quality,and high dimensional accuracy.The ceramic dies seem to be adequate for superplastic forming the high accuracy Ti6Al4V, and the trials have confirmed the potential of the ZrO_(2)-TiO_(2) ceramic die.

Thermal Expansion of Solids

The work covers a novel approach to the description of the phenomenon of thermal expansion of solids. The reason for undertaking the scientific quest is presented to follow with the analysis of existing knowledge on the characteristics of phenomenon of thermal expansion of bodies being in the state of aggregation. A critical approach to the existing law of the linear thermal expansion is given. The paper presents an adequate approach to this considered phenomenon. The description provides parametric and functional characteristics of this phenomenon. The relationships of the coefficients of linear expansion on temperature for particular interstate zones, as well as the initial coefficients related to these zones, are presented. In the summary a synthesis of all actions and considerations with the directions to the adequate knowledge with advantage on the subjected phenomenon has been performed. It regards also to the latest thermal characteristics of solids, referred to the phase transformations. All they are realized by dilatometric studies together with determination of curves of thermal expansions of solids.

Assessments of coefficients of linear thermal expansions for magnetic elements Fe, Co and Ni

The coefficients of linear thermal expansions （CLEs） of magnetic elements Fe, Co and Ni were assessed from experimental information using theoretical models combined with MATLAB calculations. Model parameters can be determined accurately, and the assessed data are in good agreement with the experimental results. To facilitate the assessments, theories of thermal expansion were applied to separate CLEs into its nonmagnetic and magnetic components. The calculations of nonmagnetic contribution to CLEs were based on the modified Gruineisen- Debye model, in which the Debye temperature was regarded as an undetermined constant. In order to put the prediction of CLEs at the magnetic transition region on a sound physical basis, two kinds of theoretical models were innovatively used to calculate the magnetic contribution to CLEs, i.e., the Bragg-Williams model and the Fermi-Dirac distribution function. Model parameters were evaluated from experimental data using least square method. Detailed comparisons were made with the published experimental data and the calculated total CLEs. A satisfactory agreement is reached.

A UNIVERSAL ANALYTIC POTENTIAL-ENERGY FUNCTION BASED ON A PHASE FACTOR

Using a field equation with a phase factor, a universal analytic potential-energy function applied to the interactions between diatoms or molecules is derived, and five kinds of potential curves of common shapes are obtained adjusting the phase factors. The linear thermal expansion coefficients and Young's moduli of eleven kinds of face-centered cubic (fcc) metals - Al, Cu, Ag, etc. are calculated using the potential-energy function; the computational results are quite consistent with experimental values. Moreover, an analytic relation between the linear thermal expansion coefficients and Young's moduli of fcc metals is given using the potential-energy function. Finally, the force constants of fifty-five kinds of diatomic moleculars with low excitation state are computed using this theory, and they are quite consistent with RKR (Rydberg-Klein-Rees) experimental values.

Thermodynamic prediction of martensitic transformation temperature in Fe-C-X(X=Ni,Mn,Si,Cr)systems with dilatational coefficient model

Martensitic transformation is significant to strengthen steels,but its thermodynamic prediction is restricted to simple systems due to lacking multicomponent interaction parameters.The driving forces of martensitic transformation can be divided into chemical and non-chemical driving forces.The magnetic parameters are carefully optimized because it affects the magnetic Gibbs free energy of austenite and ferrite,and have big impact on the chemical driving force.The dilatational strain energy provides major contribution to non-chemical driving force,thus the integrated-models for dilatational coefficient are constructed in a wide composition and temperature range based on the experimental dilatational data.It expands the scope of application of thermodynamic model and improved prediction accuracy of martensitic transformation temperature(M_(s)).The prediction error reaches 5.6%for Fe-C-X(X=Ni,Mn,Si,Cr)and6.5%for Fe-C-Mn-Si-X(X=Cr,Ni)steels.