期刊文献+
共找到424篇文章
< 1 2 22 >
每页显示 20 50 100
Design of a Low Power Low-Noise Amplifier with Improved Gain/Noise Ratio
1
作者 Raja Mahmou Khalid Faitah 《World Journal of Engineering and Technology》 2024年第1期80-91,共12页
This work details the development of a broad-spectrum LNA (Low Noise Amplifier) circuit using a 65 nm CMOS technology. The design incorporates an inductive degeneracy circuit, employing a theoretical approach to enhan... This work details the development of a broad-spectrum LNA (Low Noise Amplifier) circuit using a 65 nm CMOS technology. The design incorporates an inductive degeneracy circuit, employing a theoretical approach to enhance gain, minimize noise levels, and uphold low power consumption. The progression includes a shift to a cascode structure to further refine LNA parameters. Ultimately, with a 1.8 V bias, the achieved performance showcases a gain-to-noise figure ratio of 16 dB/0.5 dB, an IIP3 linearity at 5.1 dBm, and a power consumption of 3 mW. This architecture is adept at operating across a wide frequency band spanning from 0.5 GHz to 6 GHz, rendering it applicable in diverse RF scenarios. 展开更多
关键词 LNA DEGENERACY Noise Figure linearITY Power Consumption gain
下载PDF
Gain Scheduling Control of Nonlinear Shock Motion Based on Equilibrium Manifold Linearization Model 被引量:1
2
作者 Cui Tao Yu Daren Bao Wen Yang Yongbin 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2007年第6期481-487,共7页
The equilibrium manifold linearization model of nonlinear shock motion is of higher accuracy and lower complexity over other models such as the small perturbation model and the piecewise-linear model. This paper analy... The equilibrium manifold linearization model of nonlinear shock motion is of higher accuracy and lower complexity over other models such as the small perturbation model and the piecewise-linear model. This paper analyzes the physical significance of the equilibrium manifold linearization model, and the self-feedback mechanism of shock motion is revealed. This helps to describe the stability and dynamics of shock motion. Based on the model, the paper puts forwards a gain scheduling control method for nonlinear shock motion. Simulation has shown the validity of the control scheme. 展开更多
关键词 shock motion equilibrium manifold linearization gain scheduling control
下载PDF
Peak-to-Peak Gain Minimization for Uncertain Linear Discrete Systems: A Matrix Inequality Approach 被引量:1
3
作者 JI Xiao-Fu SU Hong-Ye CHU Jian 《自动化学报》 EI CSCD 北大核心 2007年第7期753-756,共4页
为不明确的线性分离系统的一个班的 peak-to-peak 获得最小化的一条矩阵不平等途径被学习。我们最小化 * 是导致的 L 标准上的最好的上面的界限的 -norm, 由与逃避不了的椭圆体围住可达到的集合获得了,而不是直接最小化导致的 L 标准... 为不明确的线性分离系统的一个班的 peak-to-peak 获得最小化的一条矩阵不平等途径被学习。我们最小化 * 是导致的 L 标准上的最好的上面的界限的 -norm, 由与逃避不了的椭圆体围住可达到的集合获得了,而不是直接最小化导致的 L 标准。基于这个想法,柔韧的 peak-to-peak 获得最小化的问题和控制器合成被归结为解决一套矩阵不平等的可行性问题。一个数字例子被用来表明介绍方法的可行性和有效性。 展开更多
关键词 不确定线性离散系统 峰值最小化 矩阵不等式 鲁棒控制
下载PDF
基于遗传算法的不等间距阵优化方法
4
作者 陈新华 段文彬 郑恩明 《应用声学》 CSCD 北大核心 2024年第1期24-31,共8页
阵元数一定情况下,针对不等间距拖线阵高频信号处理存在的空间增益和无栅瓣兼容问题,提出一种基于遗传算法的不等间距拖线阵阵型优化方法。该方法以频带交互下最大旁瓣级最小作为约束因子,通过模拟生物自然进化过程搜索全局最优解,得到... 阵元数一定情况下,针对不等间距拖线阵高频信号处理存在的空间增益和无栅瓣兼容问题,提出一种基于遗传算法的不等间距拖线阵阵型优化方法。该方法以频带交互下最大旁瓣级最小作为约束因子,通过模拟生物自然进化过程搜索全局最优解,得到优化后的阵元位置。优化后阵型在保证低频信号处理空间增益不变情况下,实现对高频信号高空间增益、无栅瓣处理。计算机仿真结果表明:相比未优化阵型,在高频信号处理方面,优化后阵型在无栅瓣情况下,空间增益提升值近似理论值提升值;在低频信号处理方面,优化后阵型具有相同的空间增益。为实际不等间距拖线阵阵型优化和应用提供了一种思路。 展开更多
关键词 不等间距拖线阵 阵型优化 空间增益 栅瓣
下载PDF
基于ATSMC的破障武器随动系统控制研究
5
作者 肖顺志 高强 +2 位作者 侯远龙 符伟鹏 闫智聪 《火炮发射与控制学报》 北大核心 2024年第1期87-94,共8页
针对电动缸驱动的车载破障武器随动系统控制问题,提出了一种基于指数收敛的干扰观测器和反正切滑模控制器的方法。研究了电动缸传动时系统具有的非线性增益,推导了电动缸机构的变传动比和变负载力矩的公式。为了对随动系统进行位置和速... 针对电动缸驱动的车载破障武器随动系统控制问题,提出了一种基于指数收敛的干扰观测器和反正切滑模控制器的方法。研究了电动缸传动时系统具有的非线性增益,推导了电动缸机构的变传动比和变负载力矩的公式。为了对随动系统进行位置和速度控制,根据多项式Terminal滑模控制器的思想,采用等效趋近律的方法,设计了反正切Terminal滑模控制器(ATSMC),其具有全局鲁棒性和有限时间可达的能力;为了对系统内部的不确定性和外部扰动进行观测和补偿,设计了一种基于指数收敛的干扰观测器。对控制系统进行仿真,结果表明,ATSMC具有更好的鲁棒性,提高了随动系统控制精度,缩短了响应时间;基于指数收敛的干扰观测器能较好地补偿系统运行中产生的各种扰动,降低了系统稳态误差。 展开更多
关键词 滑模控制 随动系统 非线性增益 反正切终端滑模 鲁棒性
下载PDF
基于多胞体系统的FWID EV鲁棒加权增益调度轨迹跟踪控制
6
作者 李志文 焦晓红 张婷 《汽车安全与节能学报》 CAS CSCD 北大核心 2024年第1期111-120,共10页
为了提高四轮独立驱动电动汽车(FWID EV)轨迹跟踪控制性能,针对车辆横向运动系统的不确定性与非线性问题,考虑转向执行机构的动态特性,提出了基于线性变参数(LPV)的鲁棒加权增益调度轨迹跟踪控制策略。首先利用凸分解技术将LPV系统转化... 为了提高四轮独立驱动电动汽车(FWID EV)轨迹跟踪控制性能,针对车辆横向运动系统的不确定性与非线性问题,考虑转向执行机构的动态特性,提出了基于线性变参数(LPV)的鲁棒加权增益调度轨迹跟踪控制策略。首先利用凸分解技术将LPV系统转化为有限多胞顶点凸组合的多胞体系统,然后基于离线设计的每个多胞顶点控制器和线性组合在线计算任意时变参数对应的系统控制器参数,并利用MATLAB和CarSim进行联合仿真。结果表明:在加速变道场景下,所设计的控制器可以保证横向偏移误差不超过2 cm,横向偏移平均绝对误差不超过0.9 cm的较高跟踪精度及行驶稳定性和鲁棒性。 展开更多
关键词 四轮独立驱动电动汽车(FWID EV) 轨迹跟踪控制 线性变参数(LPV) 加权增益调度
下载PDF
主动悬架的Gain-Scheduling H_∞控制 被引量:1
7
作者 韩光信 陈虹 《吉林大学学报(信息科学版)》 CAS 2005年第6期702-706,共5页
当汽车悬架的某些参数在较大的范围内变化时,仅通过一个鲁棒控制器有时难以获得令人满意的性能。为此,基于LM I(L inearM atrix Inequalities)优化方法,根据参数变化范围设计多个H∞控制器,并根据实时测得的参数通过内插进行平滑切换,... 当汽车悬架的某些参数在较大的范围内变化时,仅通过一个鲁棒控制器有时难以获得令人满意的性能。为此,基于LM I(L inearM atrix Inequalities)优化方法,根据参数变化范围设计多个H∞控制器,并根据实时测得的参数通过内插进行平滑切换,以协调相互冲突的诸性能要求,获得汽车系统的最佳总体性能和在多变的不确定的环境中行驶的鲁棒性。仿真结果表明,该方法能够获得满意的控制性能。 展开更多
关键词 主动悬架 线性矩阵不等式 gain-SchedulingH∞控制
下载PDF
具有时变柔性负载的电液力控制系统中Gain-Scheduled H_∞控制器的研究 被引量:8
8
作者 韩俊伟 赵慧 +1 位作者 马剑文 曾祥荣 《机械工程学报》 EI CSCD 北大核心 2000年第4期58-61,69,共5页
针对具有时变柔性负载的电液力控制系统设计了 Gain- Sheduled H_∞控制器。 Gain- Shcheduled H_∞控制适用于状态空间矩阵是时变参数的线性函数的慢时变系统。其控制器的形式可根据时变参数的变化实时... 针对具有时变柔性负载的电液力控制系统设计了 Gain- Sheduled H_∞控制器。 Gain- Shcheduled H_∞控制适用于状态空间矩阵是时变参数的线性函数的慢时变系统。其控制器的形式可根据时变参数的变化实时地进行调节,以满足不同时刻系统的性能要求。将该方法应用到了液压式全自动地震波输入振动三轴装置中(以下简称动三轴)。仿真结果表明Gain一Scheduled H_∞控制方法对改善负载参数变化较大的动三轴的性能是非常有效的。 展开更多
关键词 gain-Scheduled H∞控制器 电液力控制系统
下载PDF
基于负载追踪补偿的大电流LDO设计
9
作者 朱琪 黄登华 《电子技术应用》 2024年第3期26-30,共5页
提出一种有效提升大电流输出应用的低压差线性稳压器(LDO)环路稳定性的技术,采用负载追踪补偿方式消除电路输出端与负载相关的极点对环路稳定性的影响,且在维持环路低频增益不变的前提下降低高频下环路中节点阻抗,从而达到同时提升输出... 提出一种有效提升大电流输出应用的低压差线性稳压器(LDO)环路稳定性的技术,采用负载追踪补偿方式消除电路输出端与负载相关的极点对环路稳定性的影响,且在维持环路低频增益不变的前提下降低高频下环路中节点阻抗,从而达到同时提升输出精度和优化瞬态响应性能的目的。采用TSMC 0.18µm BCD工艺进行仿真验证,结果表明电路最大输出电流6 A,在6 A/6μs的负载突变情况下输出电压下冲为36.6 mV,过冲为35.3 mV,稳定时间小于56.3μs。全负载电流范围内,瞬态性能大幅提升。 展开更多
关键词 低压差线性稳压器 负载追踪 环路增益 瞬态响应
下载PDF
基于TNESO的PMSLM分数阶自抗扰控制
10
作者 林健 孙冀婷 +2 位作者 周磊 张树龙 姜武杰 《机床与液压》 北大核心 2024年第8期14-18,共5页
线性自抗扰控制(LADRC)以结构简单、易于实现且抗干扰能力强的特点在永磁同步直线电机(PMSLM)中得到广泛应用,但电机启动和负载突变会导致LADRC系统中的线性扩张状态观测器(LESO)扰动估计精度下降。为此,提出一种基于时变增益非线性扩... 线性自抗扰控制(LADRC)以结构简单、易于实现且抗干扰能力强的特点在永磁同步直线电机(PMSLM)中得到广泛应用,但电机启动和负载突变会导致LADRC系统中的线性扩张状态观测器(LESO)扰动估计精度下降。为此,提出一种基于时变增益非线性扩张状态观测器(TNESO)的PMSLM分数阶自抗扰控制策略。结合LESO和非线性扰动观测器(NDOB),并根据误差与增益的关系构建动态增益函数,设计新型状态观测器TNESO;在此基础上,以分数阶PDμ控制律代替线性状态误差反馈控制律(LSEF),建立改进型自抗扰速度控制系统,以进一步提高电机控制的实时性和鲁棒性。仿真与实验结果表明:所设计的速度控制系统可以有效减少直线电机启动、负载突变时的观测响应时间,抑制观测初始时刻扰动峰值,从而满足高性能的PMSLM速度控制要求。 展开更多
关键词 永磁同步直线电机 线性自抗扰控制 时变增益非线性观测器 分数阶控制律
下载PDF
基于工业物联网网关状态预测的有监督机器学习模型设计
11
作者 刘涛 《西安交通工程学院学术研究》 2024年第1期52-57,共6页
传统方法工业物联网状态预测准确率低、预测时间长,为此,提出有监督机器学习模型的设计。利用有监督机器学习方法采集过滤数据样本,通过信息增益算法对分类数据进行特征评估,经相关性判断公式删除穴余数据,提高数据参数精准度。利用多... 传统方法工业物联网状态预测准确率低、预测时间长,为此,提出有监督机器学习模型的设计。利用有监督机器学习方法采集过滤数据样本,通过信息增益算法对分类数据进行特征评估,经相关性判断公式删除穴余数据,提高数据参数精准度。利用多元线性回归分析构建有监督机器学习预测模型,模拟训练得到数据运行规律,有效提高状态预测的精准度。实验分析得出:有监督机器学习模型预测误差值在0.1MB左右,误差率最小可达2%,迭代50次的单位预测速度为0.3min,准确率和预测速率明显优于传统方法,具有良好的可行性与有效性。 展开更多
关键词 有监督机器学习 工业物联网网关 状态预测 多元线性回归 信息增益
下载PDF
Polytopic LPV modeling and gain-scheduled switching control for a flexible air-breathing hypersonic vehicle 被引量:10
12
作者 Yiqing Huang Changyin Sun +2 位作者 Chengshan Qian Jingmei Zhang Li Wang 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2013年第1期118-127,共10页
A novel gain-scheduled switching control method for the longitudinal motion of a flexible air-breathing hypersonic vehicle (FAHV) is proposed. Firstly, velocity and altitude are selected as scheduling variables, a p... A novel gain-scheduled switching control method for the longitudinal motion of a flexible air-breathing hypersonic vehicle (FAHV) is proposed. Firstly, velocity and altitude are selected as scheduling variables, a polytopic linear parameter varying (LPV) model is developed to represent the complex nonlinear longitudinal dynamics of the FAHV. Secondly, based on the obtained polytopic LPV model, the flight envelope is divided into four smaller subregions, and four gain-scheduled controllers are designed for these parameter subregions. Then, by the defined switching characteristic function, these gain-scheduled controllers are switched in order to guarantee the closed-loop FAHV system to be asymptotically stable and satisfy a given tracking error performance criterion. The condition of gain-scheduled switching controller synthesis is given in terms of linear matrix inequalities (LMIs) which can be easily solved by using standard software packages. Finally, simulation results show the effectiveness of the presented method. 展开更多
关键词 linear parameter varying system gain-scheduled switching control tracking control hypersonic vehicle linear matrix inequality.
下载PDF
Sensor management based on fisher information gain 被引量:2
13
作者 Tian Kangsheng Zhu Guangxi 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2006年第3期531-534,共4页
Multi-sensor system is becoming increasingly important in a variety of military and civilian applications. In general, single sensor system can only provide partial information about environment while multi-sensor sys... Multi-sensor system is becoming increasingly important in a variety of military and civilian applications. In general, single sensor system can only provide partial information about environment while multi-sensor system provides a synergistic effect, which improves the quality and availability of information. Data fusion techniques can effectively combine this environmental information from similar and/or dissimilar sensors. Sensor management, aiming at improving data fusion performance by controlling sensor behavior, plays an important role in a data fusion process. This paper presents a method using fisher information gain based sensor effectiveness metric for sensor assignment in multi-sensor and multi-target tracking applications. The fisher information gain is computed for every sensor-target pairing on each scan. The advantage for this metric over other ones is that the fisher information gain for the target obtained by multi-sensors is equal to the sum of ones obtained by the individual sensor, so standard transportation problem formulation can be used to solve this problem without importing the concept of pseudo sensor. The simulation results show the effectiveness of the method. 展开更多
关键词 data fusion sensor management fisher information gain linear programming.
下载PDF
Global stabilizing controller design for linear time-varying systems and its application on BTT missiles 被引量:8
14
作者 Tan Feng Duan Guangren 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2008年第6期1178-1184,共7页
A parametric method for the gain-scheduled controller design of a linear time-varying system is given. According to the proposed scheduling method, the performance between adjacent characteristic points is preserved b... A parametric method for the gain-scheduled controller design of a linear time-varying system is given. According to the proposed scheduling method, the performance between adjacent characteristic points is preserved by the invariant eigenvalues and the gradually varying eigenvectors. A sufficient stability criterion is given by constructing a series of Lyapunov functions based on the selected discrete characteristic points. An important contribution is that it provides a simple and feasible approach for the design of gain-scheduled controllers for linear time-varying systems, which can guarantee both the global stability and the desired closed-loop performance of the resulted system. The method is applied to the design of a BTT missile autopilot and the simulation results show that the method is superior to the traditional one in sense of either global stability or system performance. 展开更多
关键词 linear time-varying systems global stability gain-scheduled control eigenstructure assignment BTT
下载PDF
Adaptive Output-feedback Stabilization for a Class of Uncertain Nonlinear Systems 被引量:5
15
作者 SHANG Fang LIU Yun-Gang 《自动化学报》 EI CSCD 北大核心 2010年第1期92-100,共9页
关键词 控制器 非线性 控制系数 增长速度
下载PDF
Polynomial-Based Evaluation of the Impact of Aperture Phase Taper on the Gain of Rectangular Horns
16
作者 Konstantinos B. Baltzis 《Journal of Electromagnetic Analysis and Applications》 2010年第7期424-430,共7页
The aperture phase taper due to quadratic phase errors in the principal planes of a rectangular horn imposes signifi-cant constraints on the on-axis far-field gain of the horn. The precise calculation of gain reductio... The aperture phase taper due to quadratic phase errors in the principal planes of a rectangular horn imposes signifi-cant constraints on the on-axis far-field gain of the horn. The precise calculation of gain reduction involves Fresnel integrals;therefore, exact results are obtained only from numerical methods. However, in horns’ analysis and design, simple closed-form expressions are often required for the description of horn-gain. This paper provides a set of simple polynomial approximations that adequately describe the gain reduction factors of pyramidal and sectoral horns. The proposed formulas are derived using least-squares polynomial regression analysis and they are valid for a broad range of quadratic phase error values. Numerical results verify the accuracy of the derived expressions. Application examples and comparisons with methods in the literature demonstrate the efficacy of the approach. 展开更多
关键词 Microwave Antennas RECTANGULAR HORN gain Quadratic PHASE Error linear Regression
下载PDF
Mixers of Ultra-High Gain from 5.0 to 18.0 GHz
17
作者 Hsin-Chia Yang Jui-Ming Tsai +3 位作者 Cheng-Huang Tsao Mu-Chun Wang Sungching Chi Tsin-Yuan Chang 《Wireless Engineering and Technology》 2013年第1期1-4,共4页
Mixers in the communication system provide the possibility of encoding and decoding radio-frequency EM waves with signals through the help of local oscillators. A mixer with capability of high conversion gain, good is... Mixers in the communication system provide the possibility of encoding and decoding radio-frequency EM waves with signals through the help of local oscillators. A mixer with capability of high conversion gain, good isolation, and good linearity is comparably appreciated. Extensively wide ranges of frequencies, from 5.0 to 18.0 GHz, are to be examined addressing the promising functions of mixers in this study. A TSMC 0.18 μm CMOS model implanted in Agilent ADS is used for the circuit designs. Generated from Gilbert Cell Mixer, the modified circuits take advantage of extra active and passive devices to optimize the conversion gains. Characteristics of high conversion gain over 20 dB or even higher (as high as 29.842 dB at -40 mW RF power at working frequency 6 GHz) and low noise figures (NF) are shown. 展开更多
关键词 Gilbert Cell MIXER P1dB linearITY Noise FIGURE (NF) Conversion gain Isolation
下载PDF
非线性互联系统状态观测器设计方法研究
18
作者 孙延修 黎虹 《自动化仪表》 CAS 2023年第1期35-41,共7页
非线性互联系统广泛应用于各类工业生产中。随着科学技术的迅速发展,控制系统的复杂程度越来越高,同时各子系统之间的互联性也变得越来越强。因此,针对日益复杂的非线性互联系统进行研究,已成为一个非常重要的课题。针对非线性互联系统... 非线性互联系统广泛应用于各类工业生产中。随着科学技术的迅速发展,控制系统的复杂程度越来越高,同时各子系统之间的互联性也变得越来越强。因此,针对日益复杂的非线性互联系统进行研究,已成为一个非常重要的课题。针对非线性互联系统观测器的设计方法进行研究,通过设计状态观测器实现对互联系统中状态向量的鲁棒估计。首先,基于李雅普诺夫函数给出广义互联系统状态观测器存在的充分条件。其次,将非线性广义互联系统观测器的存在条件进行推广,得到正常非线性互联系统观测器存在的充分条件。观测器的存在条件均通过Schur补引理,以线性矩阵不等式的形式给出,简化了观测器增益矩阵的求解,得到了互联系统观测器的设计方法。最后,利用MATLAB软件计算出观测器的增益矩阵。两个算例仿真结果验证了所提方法的可行性与有效性。 展开更多
关键词 观测器 广义互联系统 线性矩阵不等式 增益矩阵 非线性 鲁棒估计 李雅普诺夫函数 状态估计
下载PDF
Analysis and control of a class of uncertain linear periodic discrete-time systems
19
作者 孙凯 谢广明 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2009年第4期475-488,共14页
Feedback control problems for linear periodic systems (LPSs) with interval- type parameter uncertainties are studied in the discrete-time domain. First, the stability analysis and stabilization problems are addresse... Feedback control problems for linear periodic systems (LPSs) with interval- type parameter uncertainties are studied in the discrete-time domain. First, the stability analysis and stabilization problems are addressed. Conditions based on the linear matrices inequality (LMI) for the asymptotical stability and state feedback stabilization, respec-tively, are given. Problems of L2-gain analysis and control synthesis are studied. For the L2-gain analysis problem, we obtain an LMI-based condition such that the autonomous uncertain LPS is asymptotically stable and has an L2-gain smaller than a positive scalar γ. For the control synthesis problem, we derive an LMI-based condition to build a state feedback controller ensuring that the closed-loop system is asymptotically stable and has an L2-gain smaller than the positive scalar γ. All the conditions are necessary and sufficient. 展开更多
关键词 linear periodic system parameter uncertainty robust stability linear matrix inequality (LMI) state feedback STABILIZATION L2-gain
下载PDF
一种线性化轨对轨调节压控振荡器设计
20
作者 王瑞 冯全源 程简 《应用科技》 CAS 2023年第5期83-87,共5页
为了解决控制电压范围小、调谐增益过大导致压控振荡器(voltage controlled oscillator,VCO)对控制线噪声抗干扰能力弱的问题,设计了一种高度线性化轨对轨频率调节的压控振荡器。采用SMIC 0.18μm CMOS工艺,设计了电压转电流电路实现控... 为了解决控制电压范围小、调谐增益过大导致压控振荡器(voltage controlled oscillator,VCO)对控制线噪声抗干扰能力弱的问题,设计了一种高度线性化轨对轨频率调节的压控振荡器。采用SMIC 0.18μm CMOS工艺,设计了电压转电流电路实现控制电压与电流饥渴型振荡器尾电流的轨到轨线性转化,进而实现振荡频率的轨到轨线性调节;并且利用缓冲器优化振荡波形以适应锁相环系统应用。Cadence Spectre仿真结果表明,振荡器在1.8 V的轨对轨控制电压范围内都具有很好的线性,调谐增益为183 MHz/V,频率范围为0.89~1.22 GHz,中心频率1.06 GHz,功耗仅有227.8μW。本文设计适用于锁相环的集成应用,可为压控振荡器的设计提供支持。 展开更多
关键词 轨对轨 线性 频率范围 中心频率 调谐增益 缓冲器 压控振荡器 锁相环
下载PDF
上一页 1 2 22 下一页 到第
使用帮助 返回顶部