Contact Analysis and Modeling of Standing Wave Linear Ultrasonic Motor

A contact model for describing the contact mechanics between the stator and slider of the standing wave linear ultrasonic motor was presented. The proposed model starts from the assumption that the vibration characteristics of the stator is not affected by the contact process. A modified friction models was used to analyze the contact problems. Firstly, the dynamic normal contact force, interface friction force, and steady-state characteristics were analyzed. Secondly, the influences of the contact layer material, the dynamic characteristics of the stator, and the pre-load on motor performance were simulated. Finally, to validate the contact model, a linear ultrasonic motor based on in-plane modes was used as an example. The corresponding results show that a set of simulation of motor performances based on the proposed contact mechanism is in good agreement with experimental results. This model is helpful to understanding the operation principle of the standing wave linear motor and thus contributes to the design of these types of motor.

Transient Response Model of Standing Wave Piezoelectric Linear Ultrasonic Motor

A transient response model for describing the starting and stopping characteristics of the standing wave piezoelectric linear ultrasonic motor was presented. Based on the contact dynamic model, the kinetic equation of the motor was derived. The starting and stopping characteristics of the standing wave piezoelectric linear ultrasonic motor according to different loads, contact stiffness and inertia mass were described and analyzed, respectively. To validate the transient response model, a standing wave piezoelectric linear ultrasonic motor based on in-plane modes was used to carry out the simulation and experimental study. The corresponding results showed that the simulation of the motor performances based on the proposed model agreed well with the experimental results. This model will helpful to improve the stepping characteristics and the control flexibility of the standing wave piezoelectric linear ultrasonic motor.

The characteristics of hybrid transducer type linear ultrasonic motor with large thrust and large stroke

This hybrid transducer type linear ultrasonic motor is a new troe of the lineax ultrasonic motor proposed by the authors. This paper describes its basic structure and operation principle, provides its mechedsm of the large thrust and large seif lock force when power is cut off. The measured characteristics of the prototype motor are shown, its mtalmum thrust is 11 N and mtalmum output power is 1.4 W, the backward and forward motion performances are roughly coincident

Transducer-type bi-directional linear ultrasonic motor and experiment

A transducer-trpe bi-directional linear ultrasonic motor is presented. It has the features of flexible bi-directional drive, simple construction and easy control, etc. The character- istics parameters of the prototype are: frequency 21.46 kHz, maximum moving speed 400 mm/s under pre-load of 3.2 N, maximum thrust 2.1 N under pre-load of 1.6 N. The influence of phase shift and vibration amplitude of ultrasonic transducers on ideal elliptical locus and output characteristics are investigated with theoretical and experimental methods.

Novel Linear Piezoelectric Motor for Precision Position Stage

Conventional servomotor and stepping motor face challenges in nanometer positioning stages due to the complex structure, motion transformation mechanism, and slow dynamic response, especially directly driven by linear motor. A new butterfly-shaped linear piezoelectric motor for linear motion is presented. A two-degree precision position stage driven by the proposed linear ultrasonic motor possesses a simple and compact configuration, which makes the system obtain shorter driving chain. Firstly, the working principle of the linear ultrasonic motor is analyzed. The oscillation orbits of two driving feet on the stator are produced successively by using the anti-symmetric and symmetric vibration modes of the piezoelectric composite structure, and the slider pressed on the driving feet can be propelled twice in only one vibration cycle. Then with the derivation of the dynamic equation of the piezoelectric actuator and transient response model, start-upstart-up and settling state characteristics of the proposed linear actuator is investigated theoretically and experimentally, and is applicable to evaluate step resolution of the precision platform driven by the actuator. Moreover the structure of the two-degree position stage system is described and a special precision displacement measurement system is built. Finally, the characteristics of the two-degree position stage are studied. In the closed-loop condition the positioning accuracy of plus or minus 〈0.5 μm is experimentally obtained for the stage propelled by the piezoelectric motor. A precision position stage based the proposed butterfly-shaped linear piezoelectric is theoretically and experimentally investigated.