ANALOG PREDISTORTION LINEARIZER ON REDUCING CORRECTED AMPLITUDE OVERSHOOT

This paper presents a dual-nonlinear branch linearizer for reducing the corrected amplitude overshoot of conventional single nonlinear branch linearizer. Theoretical analysis is carried out, the analysis is verified by simulation, and a prototype of Ka band 25.28~26.08 GHz dual nonlinear branch linearizer is achieved. It indicates that the corrected amplitude overshoot is less than 0.5 dB, the C/I3 improvement is more than 10 dB related to a single carrier IBO 9 dB, when it is linked and tested for 50 W spacebrone Travelling Wave Tube Amplifier(TWTA).

FPGA Implementation of a Power Amplifier Linearizer for an ETSI-SDR OFDM Transmitter

Most satellite digital radio （SDR） systems use orthogonal frequency-division multiplexing （OFDM） transmission, which means that variable envelope signals are distorted by the RF power amplifier （PA）. It is customary to back off the input power to the PA to avoid the PA nonlinear region of operation. In this way, linearity can be achieved at the cost of power efficiency. Another attractive option is to use a linearizer, which compensates for the nonlinear effects of the PA. In this paper, an OFDM transmitter conforming to European Telecommunications Standard Institute SDR Technical Specifications 2007-2008 was designed and implemented on a low-cost field-programmable gate array （FPGA） platform. A weakly nonlinear PA, operating in the L-band SDR frequency, was used for signal transmission. An adaptive linearizer was designed and implemented on the same FPGA device using digital predistortion to correct the undesired effects of the PA on the transmitted signal. Test results show that spectral distortion can be suppressed between 6-9 dB using the designed linearizer when the PA is driven close to its saturation region.

A 28GHz Power Amplifier with Analog Predistortion Linearizer in 65nm CMOS

This paper proposes that a radio frequency power amplifier is suitable for a 5G millimeter wave.It adopts a three-stage single-ended structure at 28GHz.An analog predistortion lmearization method is used to improve the linearity of the power amplifier(PA).As a result,there is a significant improvement in power-added efficiency(PAE)and linearity is achieved.The Ka-band PA is implemented in TSMC 65nm CMOS process.At 1.2V supply voltage,the PA proposed in this paper achieves a saturated output power of 15.9dBm and a PAE of 16%.After linearization,the output power at the ldB compression point is increased by 2dBm,with efficient gain compensation performance.

High linearity 5.2-GHz power amplifier MMIC using CPW structure technology with a linearizer circuit

A built-in linearizer was applied to improve the linearity in a 5.2-GHz power amplifier microwave monolithic integrated circuit（MMIC）,which was undertaken with 0.15-μm AlGaAs/InGaAs D-mode PHEMT technology. The power amplifier（PA） was studied taking into account the linearizer circuit and the coplanar waveguide（CPW） structures.Based on these technologies,the power amplifier,which has a chip size of 1.44×1.10 mm^2,obtained an output power of 13.3 dBm and a power gain of 14 dB in the saturation region.An input third-order intercept point （IIP3） of-3 dBm,an output third-order intercept point（OIP3） of 21.1 dBm and a power added efficiency（PAE） of 22% were attained,respectively.Finally,the overall power characterization exhibited high gain and high linearity,which illustrates that the power amplifier has a compact circuit size and exhibits favorable RF characteristics.This power circuit demonstrated high RF characterization and could be used for microwave power circuit applications at 5.2 GHz.

TianXing:A Linear Complexity Transformer Model with Explicit Attention Decay for Global Weather Forecasting

In this paper,we introduce TianXing,a transformer-based data-driven model designed with physical augmentation for skillful and efficient global weather forecasting.Previous data-driven transformer models such as Pangu-Weather,FengWu,and FuXi have emerged as promising alternatives for numerical weather prediction in weather forecasting.However,these models have been characterized by their substantial computational resource consumption during training and limited incorporation of explicit physical guidance in their modeling frameworks.In contrast,TianXing applies a linear complexity mechanism that ensures proportional scalability with input data size while significantly diminishing GPU resource demands,with only a marginal compromise in accuracy.Furthermore,TianXing proposes an explicit attention decay mechanism in the linear attention derived from physical insights to enhance its forecasting skill.The mechanism can reweight attention based on Earth's spherical distances and learned sparse multivariate coupling relationships,promptingTianXing to prioritize dynamically relevant neighboring features.Finally,to enhance its performance in mediumrange forecasting,TianXing employs a stacked autoregressive forecast algorithm.Validation of the model's architecture is conducted using ERA5 reanalysis data at a 5.625°latitude-longitude resolution,while a high-resolution dataset at 0.25°is utilized for training the actual forecasting model.Notably,the TianXing exhibits excellent performance,particularly in the Z500(geopotential height)and T850(temperature)fields,surpassing previous data-driven models and operational fullresolution models such as NCEP GFS and ECMWF IFS,as evidenced by latitude-weighted RMSE and ACC metrics.Moreover,the TianXing has demonstrated remarkable capabilities in predicting extreme weather events,such as typhoons.

A weak formulation of heterogenous viscoacoustic wave propagation in infinite domain

The accurate simulation of wave propagation in real media requires properly taking the attenuation into account,which leads to wave dissipation together with its causal companion,wave dispersion.In this study,to obtain a weak formulation of heterogenous viscoacoustic wave propagation in an infinite domain,the viscoacoustic medium is first characterized by its frequency-dependent complex bulk compliance instead of the classically used complex bulk modulus.Then,a mechanical model using serially connected standard linear solids(SSLS)is built to obtain the rational approximation of the complex bulk compliance whose parameters are calculated via an adapted nonlinear optimization method.Utilizing the obtained bulk compliance-based constitutive relation,a novel second-order viscoacoustic wave equation in the frequency domain is derived,of which the weak formulation can be physically explained as the virtual work equation and can thus be discretized using a continuous spectral element method in space.Additionally,a new method is introduced to address the convolution terms involved in the inverse Fourier transform,whose accurate time integration can then be achieved using an explicit time scheme,which avoids the transient growth that exists in the classical method.The resulting full time-space decoupling scheme can handle wave propagation in arbitrary heterogeneous media.Moreover,to treat the wave propagation in an infinite domain,a perfectly matched layer in weak formulation is derived for the truncation of the infinite domain via complex coordinate stretching of the virtual work equation.With only minor modification,the resulting perfectly matched layer can be implemented using the same time scheme as for the wave equation inside the truncated domain.The accuracy,numerical stability,and versatility of the new proposed scheme are demonstrated with numerical examples.

A review of linear friction welding of Ni -based superalloys

Ni-based superalloys are one of the most important materials employed in high-temperature applications within the aerospace and nuclear energy industries and in gas turbines due to their excellent corrosion,radiation,fatigue resistance,and high-temperature strength.Linear friction welding(LFW)is a new joining technology with near-net-forming characteristics that can be used for the manu-facture and repair of a wide range of aerospace components.This paper reviews published works on LFW of Ni-based superalloys with the aim of understanding the characteristics of frictional heat generation and extrusion deformation,microstructures,mechanical proper-ties,flash morphology,residual stresses,creep,and fatigue of Ni-based superalloy weldments produced with LFW to enable future optim-um utilization of the LFW process.

Effects of the initiation position on the damage and fracture characteristics of linear-charge blasting in rock

To study the effects of the initiation position on the damage and fracture characteristics of linear-charge blasting, blasting model experiments were conducted in this study using computed tomography scanning and three-dimensional reconstruction methods. The fractal damage theory was used to quantify the crack distribution and damage degree of sandstone specimens after blasting. The results showed that regardless of an inverse or top initiation, due to compression deformation and sliding frictional resistance, the plugging medium of the borehole is effective. The energy of the explosive gas near the top of the borehole is consumed. This affects the effective crushing of rocks near the top of the borehole, where the extent of damage to Sections Ⅰ and Ⅱ is less than that of Sections Ⅲ and Ⅳ. In addition, the analysis revealed that under conditions of top initiation, the reflected tensile damage of the rock at the free face of the top of the borehole and the compression deformation of the plug and friction consume more blasting energy, resulting in lower blasting energy efficiency for top initiation. As a result, the overall damage degree of the specimens in the top-initiation group was significantly smaller than that in the inverse-initiation group. Under conditions of inverse initiation, the blasting energy efficiency is greater, causing the specimen to experience greater damage. Therefore, in the engineering practice of rock tunnel cut blasting, to utilize blasting energy effectively and enhance the effects of rock fragmentation, using the inverse-initiation method is recommended. In addition, in three-dimensional(3D) rock blasting, the bottom of the borehole has obvious end effects under the conditions of inverse initiation, and the crack distribution at the bottom of the borehole is trumpet-shaped. The occurrence of an end effect in the 3D linear-charge blasting model experiment is related to the initiation position and the blocking condition.

Influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel

The influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel is investigated.The DarcyBrinkman model is used to characterize the fluid flow dynamics in porous materials.The analytical solutions are obtained for the unidirectional and completely developed flow.Based on a normal mode analysis,the generalized eigenvalue problem under a perturbed state is solved.The eigenvalue problem is then solved by the spectral method.Finally,the critical Rayleigh number with the corresponding wavenumber is evaluated at the assigned values of the other flow-governing parameters.The results show that increasing the Darcy number,the Lewis number,the Dufour parameter,or the Soret parameter increases the stability of the system,whereas increasing the inclination angle of the channel destabilizes the flow.Besides,the flow is the most unstable when the channel is vertically oriented.

Numerical and experimental investigation on hydraulic-electric rock fragmentation of heterogeneous granite

Hydraulic-electric rock fragmentation(HERF)plays a significant role in improving the efficiency of high voltage pulse rock breaking.However,the underlying mechanism of HERF remains unclear.In this study,considering the heterogeneity of the rock,microscopic thermodynamic properties,and shockwave time domain waveforms,based on the shockwave model,digital imaging technology and the discrete element method,the cyclic loading numerical simulations of HERF is achieved by coupling electrical,thermal,and solid mechanics under different formation temperatures,confining pressure,initial peak voltage,electrode bit diameter,and loading times.Meanwhile,the HERF discharge system is conducive to the laboratory experiments with various electrical parameters and the resulting broken pits are numerically reconstructed to obtain the geometric parameters.The results show that,the completely broken area consists of powdery rock debris.In the pre-broken zone,the mineral cementation of the rock determines the transition of type CⅠcracks to type CⅡand type CⅢcracks.Furthermore,the peak pressure of the shockwave increased with initial peak voltage but decreased with electrode bit diameter,while the wave front time reduced.Moreover,increasing well depth,formation temperature and confining pressure augment and inhibit HERF,but once confining pressure surpassed the threshold of 60 MPa for 152.40,215.90,and 228.60 mm electrode bits,and 40 MPa for 309.88 mm electrode bits,HERF is promoted.Additionally,for the same kind of rock,the volume and width of the broken pit increase with higher initial peak voltage and rock fissures will promote HERF.Eventually,the electrode drill bit with a 215.90 mm diameter is more suitable for drilling pink granite.This research contributes to a better microscopic understanding of HERF and provides valuable insights for electrode bit selection,as well as the optimization of circuit parameters for HERF technology.

ESTIMATE ON THE BLOCH CONSTANT FOR CERTAIN HARMONIC MAPPINGS UNDER A DIFFERENTIAL OPERATOR

In this paper,we first obtain the precise values of the univalent radius and the Bloch constant for harmonic mappings of the formL(f)=zfz-zfz,where f represents normalized harmonic mappings with bounded dilation.Then,using these results,we present better estimations for the Bloch constants of certain harmonic mappings L(f),where f is a K-quasiregular harmonic or open harmonic.Finally,we establish three versions of BlochLandau type theorem for biharmonic mappings of the form L(f).These results are sharp in some given cases and improve the related results of earlier authors.

Linear paired electrolysis of furfural to furoic acid at both anode and cathode in a multiple redox mediated system

Implementing a new energy-saving electrochemical synthesis system with high commercial value is a strategy of the sustainable development for upgrading the bulk chemicals preparation technology in the future.Here,we report a multiple redox-mediated linear paired electrolysis system,combining the hydrogen peroxide mediated cathode process with the I2 mediated anode process,and realize the conversion of furfural to furoic acid in both side of the dividedflow cell simultaneously.By reasonably controlling the cathode potential,the undesired water splitting reaction and furfural reduction side reactions are avoided.Under the galvanostatic electrolysis,the two-mediated electrode processes have good compatibility,which reduce the energy consumption by about 22%while improving the electronic efficiency by about 125%.This system provides a green electrochemical synthesis route with commercial prospects.

A Weakly-Supervised Crowd Density Estimation Method Based on Two-Stage Linear Feature Calibration

In a crowd density estimation dataset,the annotation of crowd locations is an extremely laborious task,and they are not taken into the evaluation metrics.In this paper,we aim to reduce the annotation cost of crowd datasets,and propose a crowd density estimation method based on weakly-supervised learning,in the absence of crowd position supervision information,which directly reduces the number of crowds by using the number of pedestrians in the image as the supervised information.For this purpose,we design a new training method,which exploits the correlation between global and local image features by incremental learning to train the network.Specifically,we design a parent-child network(PC-Net)focusing on the global and local image respectively,and propose a linear feature calibration structure to train the PC-Net simultaneously,and the child network learns feature transfer factors and feature bias weights,and uses the transfer factors and bias weights to linearly feature calibrate the features extracted from the Parent network,to improve the convergence of the network by using local features hidden in the crowd images.In addition,we use the pyramid vision transformer as the backbone of the PC-Net to extract crowd features at different levels,and design a global-local feature loss function(L2).We combine it with a crowd counting loss(LC)to enhance the sensitivity of the network to crowd features during the training process,which effectively improves the accuracy of crowd density estimation.The experimental results show that the PC-Net significantly reduces the gap between fullysupervised and weakly-supervised crowd density estimation,and outperforms the comparison methods on five datasets of Shanghai Tech Part A,ShanghaiTech Part B,UCF_CC_50,UCF_QNRF and JHU-CROWD++.

Federated Learning Model for Auto Insurance Rate Setting Based on Tweedie Distribution

In the assessment of car insurance claims,the claim rate for car insurance presents a highly skewed probability distribution,which is typically modeled using Tweedie distribution.The traditional approach to obtaining the Tweedie regression model involves training on a centralized dataset,when the data is provided by multiple parties,training a privacy-preserving Tweedie regression model without exchanging raw data becomes a challenge.To address this issue,this study introduces a novel vertical federated learning-based Tweedie regression algorithm for multi-party auto insurance rate setting in data silos.The algorithm can keep sensitive data locally and uses privacy-preserving techniques to achieve intersection operations between the two parties holding the data.After determining which entities are shared,the participants train the model locally using the shared entity data to obtain the local generalized linear model intermediate parameters.The homomorphic encryption algorithms are introduced to interact with and update the model intermediate parameters to collaboratively complete the joint training of the car insurance rate-setting model.Performance tests on two publicly available datasets show that the proposed federated Tweedie regression algorithm can effectively generate Tweedie regression models that leverage the value of data fromboth partieswithout exchanging data.The assessment results of the scheme approach those of the Tweedie regressionmodel learned fromcentralized data,and outperformthe Tweedie regressionmodel learned independently by a single party.

Metal-Halide Perovskite Submicrometer-Thick Films for Ultra-Stable Self-Powered Direct X-Ray Detectors

Metal-halide perovskites are revolutionizing the world of X-ray detectors,due to the development of sensitive,fast,and cost-effective devices.Self-powered operation,ensuring portability and low power consumption,has also been recently demonstrated in both bulk materials and thin films.However,the signal stability and repeatability under continuous X-ray exposure has only been tested up to a few hours,often reporting degradation of the detection performance.Here it is shown that self-powered direct X-ray detectors,fabricated starting from a FAPbBr_(3)submicrometer-thick film deposition onto a mesoporous TiO_(2)scaffold,can withstand a 26-day uninterrupted X-ray exposure with negligible signal loss,demonstrating ultra-high operational stability and excellent repeatability.No structural modification is observed after irradiation with a total ionizing dose of almost 200 Gy,revealing an unexpectedly high radiation hardness for a metal-halide perovskite thin film.In addition,trap-assisted photoconductive gain enabled the device to achieve a record bulk sensitivity of 7.28 C Gy^(−1)cm^(−3)at 0 V,an unprecedented value in the field of thin-film-based photoconductors and photodiodes for“hard”X-rays.Finally,prototypal validation under the X-ray beam produced by a medical linear accelerator for cancer treatment is also introduced.

Flow field, sedimentation, and erosion characteristics around folded linear HDPE sheet sand fence: Numerical simulation study

Wind and sand hazards are serious in the Milan Gobi area of the Xinjiang section of the Korla Railway. In order to ensure the safe operation of railroads, there is a need for wind and sand protection in heavily sandy areas. The wind and sand flow in the region is notably bi-directional. To shield railroads from sand, a unique sand fence made of folded linear high-density polyethylene(HDPE) is used, aligning with the principle that the dominant wind direction is perpendicular to the fence. This study employed field observations and numerical simulations to investigate the effectiveness of these HDPE sand fences in altering flow field distribution and offering protection. It also explored how these fences affect the deposition and erosion of sand particles. Findings revealed a significant reduction in wind speed near the fence corner;the minimum horizontal wind speed on the leeward side of the first sand fence(LSF) decreased dramatically from 3 m/s to 0.64 m/s. The vortex area on the LSF markedly impacted horizontal wind speeds. Within the LSF, sand deposition was a primary occurrence. As wind speeds increased, the deposition zone shrank, whereas the positive erosion zone expanded. Close to the folded corners of the HDPE sand fence, there was a notable shift from the positive erosion zone to a deposition zone. Field tests and numerical simulations confirmed the high windproof efficiency(WE) and sand resistance efficiency(SE) in the HDPE sand fence. Folded linear HDPE sheet sand fence can effectively slow down the incoming flow and reduce the sand content, thus achieving good wind and sand protection. This study provides essential theoretical guidance for the design and improvement of wind and sand protection systems in railroad engineering.

Enhancing microseismic/acoustic emission source localization accuracy with an outlier-robust kernel density estimation approach

Monitoring sensors in complex engineering environments often record abnormal data,leading to significant positioning errors.To reduce the influence of abnormal arrival times,we introduce an innovative,outlier-robust localization method that integrates kernel density estimation(KDE)with damping linear correction to enhance the precision of microseismic/acoustic emission(MS/AE)source positioning.Our approach systematically addresses abnormal arrival times through a three-step process:initial location by 4-arrival combinations,elimination of outliers based on three-dimensional KDE,and refinement using a linear correction with an adaptive damping factor.We validate our method through lead-breaking experiments,demonstrating over a 23%improvement in positioning accuracy with a maximum error of 9.12 mm(relative error of 15.80%)—outperforming 4 existing methods.Simulations under various system errors,outlier scales,and ratios substantiate our method’s superior performance.Field blasting experiments also confirm the practical applicability,with an average positioning error of 11.71 m(relative error of 7.59%),compared to 23.56,66.09,16.95,and 28.52 m for other methods.This research is significant as it enhances the robustness of MS/AE source localization when confronted with data anomalies.It also provides a practical solution for real-world engineering and safety monitoring applications.

A 28/56 Gb/s NRZ/PAM-4 dual-mode transceiver with 1/4 rate reconfigurable 4-tap FFE and half-rate slicer in a 28-nm CMOS

A 28/56 Gb/s NRZ/PAM-4 dual-mode transceiver(TRx)designed in a 28-nm complementary metal-oxide-semiconduc-tor(CMOS)process is presented in this article.A voltage-mode(VM)driver featuring a 4-tap reconfigurable feed-forward equal-izer(FFE)is employed in the quarter-rate transmitter(TX).The half-rate receiver(RX)incorporates a continuous-time linear equal-izer(CTLE),a 3-stage high-speed slicer with multi-clock-phase sampling,and a clock and data recovery(CDR).The experimen-tal results show that the TRx operates at a maximum speed of 56 Gb/s with chip-on board(COB)assembly.The 28 Gb/s NRZ eye diagram shows a far-end vertical eye opening of 210 mV with an output amplitude of 351 mV single-ended and the 56 Gb/s PAM-4 eye diagram exhibits far-end eye opening of 33 mV(upper-eye),31 mV(mid-eye),and 28 mV(lower-eye)with an output amplitude of 353 mV single-ended.The recovered 14 GHz clock from the RX exhibits random jitter(RJ)of 469 fs and deterministic jitter(DJ)of 8.76 ps.The 875 Mb/s de-multiplexed data features 593 ps horizontal eye opening with 32.02 ps RJ,at bit-error rate(BER)of 10-5(0.53 UI).The power dissipation of TX and RX are 125 and 181.4 mW,respectively,from a 0.9-V sup-ply.

Optimization Algorithms of PERT/CPM Network Diagrams in Linear Diophantine Fuzzy Environment

The idea of linear Diophantine fuzzy set(LDFS)theory with its control parameters is a strong model for machine learning and optimization under uncertainty.The activity times in the critical path method(CPM)representation procedures approach are initially static,but in the Project Evaluation and Review Technique(PERT)approach,they are probabilistic.This study proposes a novel way of project review and assessment methodology for a project network in a linear Diophantine fuzzy(LDF)environment.The LDF expected task time,LDF variance,LDF critical path,and LDF total expected time for determining the project network are all computed using LDF numbers as the time of each activity in the project network.The primary premise of the LDF-PERT approach is to address ambiguities in project network activity timesmore simply than other approaches such as conventional PERT,Fuzzy PERT,and so on.The LDF-PERT is an efficient approach to analyzing symmetries in fuzzy control systems to seek an optimal decision.We also present a new approach for locating LDF-CPM in a project network with uncertain and erroneous activity timings.When the available resources and activity times are imprecise and unpredictable,this strategy can help decision-makers make better judgments in a project.A comparison analysis of the proposed technique with the existing techniques has also been discussed.The suggested techniques are demonstrated with two suitable numerical examples.

The Persistence and Zonal Scale of Atmospheric Dipolar Modes

This study investigates the relationship between the persistence and the zonal scale of atmospheric dipolar modes(DMs). Results from the daily data of ERA5 and the long-term output of an idealized atmospheric model show that the atmospheric DMs with a broader(narrower) zonal scale dipolar structure possess a longer(shorter) persistence. A detailed vorticity budget analysis indicates that the persistence of a hemispheric-scale DM(1/1 DM) and a regional or sectoral DM(1/8 DM) in the model both largely rely on the persistence of the nonlinear eddy forcing. Linear terms can indirectly reduce the persistence of the anomalous nonlinear eddy forcing in a 1/8 DM by modifying the baroclinicity via the arousal of anomalous vertical motions. Therefore, the atmospheric DMs with a broader(narrower) zonal scale possess a longer(shorter) persistence because the effects of the linear terms are less(more) pronounced when the atmospheric DMs have better(worse) zonal symmetry. Further analyses show that the positive eddy feedback effect is weak or even absent in a 1/8DM and the high-frequency eddy forcing acts more like a concomitant phenomenon rather than a leading driving factor for a 1/8 DM. Thus, the hemispheric-scale DM and the regional or sectoral DMs are different, not only in their persistence but also in their dynamics.