The study concentrates mainly on the development of failure process incomposite rock mass. By use of acoustic emission (AE), convergence inspection, pressure monitoring,level measurement techniques and the modem signa...The study concentrates mainly on the development of failure process incomposite rock mass. By use of acoustic emission (AE), convergence inspection, pressure monitoring,level measurement techniques and the modem signal analysis technology, as well as scan electronmicroscopy (SEM) experiment, various aspects of nonlinear dynamic damage of composite rock masssurrounding the transport roadway in Linglong gold mine are discussed. According to the monitoringresults, the stability of the rock mass can be synthetically evaluated, and the intrinsic relationbetween the damage and the characteristic parameters of acoustic emission can be determined. Thelocation of the damage of rock mass can also be detected based on the acoustic emission couplemonitoring signals. Finally, the key factors which influence the stability of the transport roadwaysupported by composite hard rock materials are found out.展开更多
REE geochemical characteristics of the magmatic rocks and gold deposits in Shizishan ore-field of Tongling were studied. Three types of the magmatic rocks have almost the same chondrite-normalized REE patterns, Eu and...REE geochemical characteristics of the magmatic rocks and gold deposits in Shizishan ore-field of Tongling were studied. Three types of the magmatic rocks have almost the same chondrite-normalized REE patterns, Eu and Ce anomalous values, and ∑REE, ∑LREE/∑HREE regular changes, which indicates that their magmas come from the same source and their digenetic mechanism is fractional crystallization. In three gold deposits, the mineral ores and related altered rocks have similar chondrite-normalized REE patterns and sharp Eu positive anomalous values. The REE contents reduced from the magmatic rocks to skamization or alteration magmatic rocks, skam type ores, sulphide type ores, wall-rocks limestone or marble. The REE geochemical characteristics of the ores and related rocks show that primary fluids originated from magmatic differentiation in lower pressure of shallow crust, ore-forming hydrothermal solutions gained REE and mineralization elements further from leaching the magmatic rocks, then superimposed and reformed the limestones or marbles and deposited ore-forming material.展开更多
To predict rock burst in deep mining excavation in Linglong gold mine, systematical laboratory tests of mechanical properties of rock, in situ stress measurement and 3-D FEM analysis on energy distribution in rock mas...To predict rock burst in deep mining excavation in Linglong gold mine, systematical laboratory tests of mechanical properties of rock, in situ stress measurement and 3-D FEM analysis on energy distribution in rock mass surrounding deep mining rooms were carried out. According to various prediction criteria of rock burst, it is concluded that rock burst is liable to occur during deep mining excavation in the mine.展开更多
The Linglong-Jiaojia district is one of the most important regions containing gold deposits in China. These gold deposits can be divided into: a) the pyrite-gold-quartz vein type (Linglong type), which is controlled b...The Linglong-Jiaojia district is one of the most important regions containing gold deposits in China. These gold deposits can be divided into: a) the pyrite-gold-quartz vein type (Linglong type), which is controlled by brittle-ductile to ductile deformation structures, and b) the alteration-zone type (Jiaojia type), characterized by small veinlets, or the disseminated type recognized in brittle shear zones. Lode gold deposits in the Jiaojia area occur in NE brittle fracture zones, formed in a dominantly simple shear deformation regime, mainly in thrust attitude with a minor sinistral strike slip component. In the Linglong area, the lode gold deposits are located at the intersection of three types of structures: NNE and NE brittle-ductile fault zones and the ENE ductile reverse shear zone in the south of the area. The structural characteristics of these brittle shear zones are consistent with a tectonic NNW-SSE principal stress field orientation. Similar stresses explain the ENE Qixia fold axes, the Potouqing and several other ENE reverse ductile shear zones elsewhere in the region, the Tancheng-Lujiang fault zone and its subsidiaries in the vicinity of the Linglong-Jiaojia district, as well as the southern ENE suture zone north of Qingdao. Therefore these structural systems occurred as part of different major tectonic events under NNW-SSE compression principal stress fields in the area. Gold deposits are hosted in smaller-scale structures within the brittle fault zones and brittle-ductile shear zones. Although ore bodies and, on a smaller scale, quartz ore veins often seem to be randomly oriented, it is possible to explain their distribution and orientation in terms of the simple shear deformation process under which they were developed. The progressive simple shear failure is characterized by various fracture modes (tension and shear) that intervene in sequence. The tension and shear fractures are influenced by the stress level (depth of burial beneath the paleosurface) in their structural behavior, show variable dilatancy (void openings) and extend on all scales. By making use of these characteristics, a progressive failure analysis can be applied to predicting the shape and extent of ore bodies as well as the styles of mineralization at any given location.展开更多
By means of microscopy and laser Raman spectroscopy, the authors studied the fluid inclusions in petrography. The results show that there exist three-phase CO2-bearing and two-phase aqueous inclusions in gold ore; the...By means of microscopy and laser Raman spectroscopy, the authors studied the fluid inclusions in petrography. The results show that there exist three-phase CO2-bearing and two-phase aqueous inclusions in gold ore; the fluid of NaC1-H2O-CO2 system went through immiscibility in ore-forming process. Ore-forming fluids were of low salinity （0. 82%- 5.40% NaCleqv）, low density （0. 54-0.93 g/cm3 ） ; mineralization temperature were concentrated in 320℃-340℃ , with ore-forming pressure in 62-126 MPa and mineralization depth in 6.34-9.35 kin. The fluid inclusions in quartz are generally characterized by a small amount of CO2 and Na. Combined with recent results of the isotopic analysis for fluid inclusions and dating data, it was indicated that the main ore-forming fluids derived mainly from source of mantle-derived fluids with a small amount of magmatic fluid and meteoric water. The genetic type was mesothermal gold deposits involved by mantle-derived fluids.展开更多
基金This work was financially supported by the National Natural Science Foundation of China, No.50074002.
文摘The study concentrates mainly on the development of failure process incomposite rock mass. By use of acoustic emission (AE), convergence inspection, pressure monitoring,level measurement techniques and the modem signal analysis technology, as well as scan electronmicroscopy (SEM) experiment, various aspects of nonlinear dynamic damage of composite rock masssurrounding the transport roadway in Linglong gold mine are discussed. According to the monitoringresults, the stability of the rock mass can be synthetically evaluated, and the intrinsic relationbetween the damage and the characteristic parameters of acoustic emission can be determined. Thelocation of the damage of rock mass can also be detected based on the acoustic emission couplemonitoring signals. Finally, the key factors which influence the stability of the transport roadwaysupported by composite hard rock materials are found out.
基金Project supported bythe National Natural Science Foundation of China (40472052)
文摘REE geochemical characteristics of the magmatic rocks and gold deposits in Shizishan ore-field of Tongling were studied. Three types of the magmatic rocks have almost the same chondrite-normalized REE patterns, Eu and Ce anomalous values, and ∑REE, ∑LREE/∑HREE regular changes, which indicates that their magmas come from the same source and their digenetic mechanism is fractional crystallization. In three gold deposits, the mineral ores and related altered rocks have similar chondrite-normalized REE patterns and sharp Eu positive anomalous values. The REE contents reduced from the magmatic rocks to skamization or alteration magmatic rocks, skam type ores, sulphide type ores, wall-rocks limestone or marble. The REE geochemical characteristics of the ores and related rocks show that primary fluids originated from magmatic differentiation in lower pressure of shallow crust, ore-forming hydrothermal solutions gained REE and mineralization elements further from leaching the magmatic rocks, then superimposed and reformed the limestones or marbles and deposited ore-forming material.
文摘To predict rock burst in deep mining excavation in Linglong gold mine, systematical laboratory tests of mechanical properties of rock, in situ stress measurement and 3-D FEM analysis on energy distribution in rock mass surrounding deep mining rooms were carried out. According to various prediction criteria of rock burst, it is concluded that rock burst is liable to occur during deep mining excavation in the mine.
基金This paper is a part of results from the project ＂Shear Zone Control Gold Deposits in China＂ supported by the National Natural Science Foundation of China and an international exchange project supported by the same institution （to Lu）.
文摘The Linglong-Jiaojia district is one of the most important regions containing gold deposits in China. These gold deposits can be divided into: a) the pyrite-gold-quartz vein type (Linglong type), which is controlled by brittle-ductile to ductile deformation structures, and b) the alteration-zone type (Jiaojia type), characterized by small veinlets, or the disseminated type recognized in brittle shear zones. Lode gold deposits in the Jiaojia area occur in NE brittle fracture zones, formed in a dominantly simple shear deformation regime, mainly in thrust attitude with a minor sinistral strike slip component. In the Linglong area, the lode gold deposits are located at the intersection of three types of structures: NNE and NE brittle-ductile fault zones and the ENE ductile reverse shear zone in the south of the area. The structural characteristics of these brittle shear zones are consistent with a tectonic NNW-SSE principal stress field orientation. Similar stresses explain the ENE Qixia fold axes, the Potouqing and several other ENE reverse ductile shear zones elsewhere in the region, the Tancheng-Lujiang fault zone and its subsidiaries in the vicinity of the Linglong-Jiaojia district, as well as the southern ENE suture zone north of Qingdao. Therefore these structural systems occurred as part of different major tectonic events under NNW-SSE compression principal stress fields in the area. Gold deposits are hosted in smaller-scale structures within the brittle fault zones and brittle-ductile shear zones. Although ore bodies and, on a smaller scale, quartz ore veins often seem to be randomly oriented, it is possible to explain their distribution and orientation in terms of the simple shear deformation process under which they were developed. The progressive simple shear failure is characterized by various fracture modes (tension and shear) that intervene in sequence. The tension and shear fractures are influenced by the stress level (depth of burial beneath the paleosurface) in their structural behavior, show variable dilatancy (void openings) and extend on all scales. By making use of these characteristics, a progressive failure analysis can be applied to predicting the shape and extent of ore bodies as well as the styles of mineralization at any given location.
文摘By means of microscopy and laser Raman spectroscopy, the authors studied the fluid inclusions in petrography. The results show that there exist three-phase CO2-bearing and two-phase aqueous inclusions in gold ore; the fluid of NaC1-H2O-CO2 system went through immiscibility in ore-forming process. Ore-forming fluids were of low salinity （0. 82%- 5.40% NaCleqv）, low density （0. 54-0.93 g/cm3 ） ; mineralization temperature were concentrated in 320℃-340℃ , with ore-forming pressure in 62-126 MPa and mineralization depth in 6.34-9.35 kin. The fluid inclusions in quartz are generally characterized by a small amount of CO2 and Na. Combined with recent results of the isotopic analysis for fluid inclusions and dating data, it was indicated that the main ore-forming fluids derived mainly from source of mantle-derived fluids with a small amount of magmatic fluid and meteoric water. The genetic type was mesothermal gold deposits involved by mantle-derived fluids.
