The recovery of heavy oil by water flooding is 10% lower than that of conventional crude oil, so enhanced oil recovery （EOR） is of great significance for heavy oil. In this paper, foam flooding with a gas-liquid rat...The recovery of heavy oil by water flooding is 10% lower than that of conventional crude oil, so enhanced oil recovery （EOR） is of great significance for heavy oil. In this paper, foam flooding with a gas-liquid ratio （GLR） of 0.2：1 for the Zhuangxi heavy oil （325 mPa.s at 55 ℃） was performed on cores, sand packs and plate model. In sand pack tests, polymer enhanced foam flooding increased oil recovery by 39.8%, which was 11.4% higher than that for alkali/surfactant/polymer （ASP） flooding under the same conditions. Polymer enhanced foam flooding in plate models shows that the low GLR foam flooding increased oil recovery by about 30%, even when the extended water flooding was finished at 90% water cut. Moreover, it was discovered by microscopy that foam was more stable in heavy oil than in light oil. These results confirm that low GLR foam flooding is a promising technology for displacing conventional heavy oil.展开更多
The aim of this study was to select sheep fat from Tsetserleg sum of Arkhangai aimag as raw material and to produce liquid soap. The oil was extracted from raw materials such as sheep’s tail fat (TF), outer fat (OF),...The aim of this study was to select sheep fat from Tsetserleg sum of Arkhangai aimag as raw material and to produce liquid soap. The oil was extracted from raw materials such as sheep’s tail fat (TF), outer fat (OF), and inner fat (IF), which were analyzed by chemical methods, and the liquid soap was obtained by cold methods. Liquid soap was prepared from three types of raw materials, each of which was mixed with 70% fat oil and 30% liquid oil. The ratio was chosen to dilute the liquid soap to 2% of the product. The most suitable oil for preparing liquid soaps from raw materials such as TFO, OFO, and IFO was the tail fat oil (TFO). The highest unsaturated fatty acid content in crude fats and oils was 41.23%, the highest content of saturated fatty acids was 22.3%, and the highest content of methyl-stearate was 33.65% by the GC-MS analytical method.展开更多
基金support from the Innovation Team Program and New Century Excellent Talents Awards Program,the Ministry of Education of ChinaFok Ying Tung Education Foundation
文摘The recovery of heavy oil by water flooding is 10% lower than that of conventional crude oil, so enhanced oil recovery （EOR） is of great significance for heavy oil. In this paper, foam flooding with a gas-liquid ratio （GLR） of 0.2：1 for the Zhuangxi heavy oil （325 mPa.s at 55 ℃） was performed on cores, sand packs and plate model. In sand pack tests, polymer enhanced foam flooding increased oil recovery by 39.8%, which was 11.4% higher than that for alkali/surfactant/polymer （ASP） flooding under the same conditions. Polymer enhanced foam flooding in plate models shows that the low GLR foam flooding increased oil recovery by about 30%, even when the extended water flooding was finished at 90% water cut. Moreover, it was discovered by microscopy that foam was more stable in heavy oil than in light oil. These results confirm that low GLR foam flooding is a promising technology for displacing conventional heavy oil.
文摘The aim of this study was to select sheep fat from Tsetserleg sum of Arkhangai aimag as raw material and to produce liquid soap. The oil was extracted from raw materials such as sheep’s tail fat (TF), outer fat (OF), and inner fat (IF), which were analyzed by chemical methods, and the liquid soap was obtained by cold methods. Liquid soap was prepared from three types of raw materials, each of which was mixed with 70% fat oil and 30% liquid oil. The ratio was chosen to dilute the liquid soap to 2% of the product. The most suitable oil for preparing liquid soaps from raw materials such as TFO, OFO, and IFO was the tail fat oil (TFO). The highest unsaturated fatty acid content in crude fats and oils was 41.23%, the highest content of saturated fatty acids was 22.3%, and the highest content of methyl-stearate was 33.65% by the GC-MS analytical method.
