Vacancies and interfaces engineering of core-shell heterostuctured NiCoP/NiO as trifunctional electrocatalysts for overall water splitting and zinc-air batteries

The electronic structures and properties of electrocatalysts,which depend on the physicochemical structure and metallic element components,could significantly affect their electrocatalytic performance and their future applications in Zn-air battery(ZAB)and overall water splitting(OWS).Here,by combining vacancies and heterogeneous interfacial engineering,three-dimensional(3D)core-shell NiCoP/NiO heterostructures with dominated oxygen vacancies have been controllably in-situ grown on carbon cloth for using as highly efficient electrocatalysts toward hydrogen and oxygen electrochemical reactions.Theoretical calculation and electrochemical results manifest that the hybridization of NiCoP core with NiO shell produces a strong synergistic electronic coupling effect.The oxygen vacancy can enable the emergence of new electronic states within the band gap,crossing the Fermi levels of the two spin components and optimizing the local electronic structure.Besides,the hierarchical core-shell NiCoP/NiO nanoarrays also endow the catalysts with multiple exposed active sites,faster mass transfer behavior,optimized electronic strutures and improved electrochemical performance during ZAB and OWS applications.

Thermal rectification induced by Wenzel–Cassie wetting state transition on nano-structured solid–liquid interfaces

Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectification phenomenon in an asymmetric solid–liquid–solid sandwiched system with a nano-structured interface.By using the non-equilibrium molecular dynamics simulations,the thermal transport through the solid–liquid–solid system is examined,and the thermal rectification phenomenon can be observed.It is revealed that the thermal rectification effect can be attributed to the significant difference in the interfacial thermal resistance between Cassie and Wenzel states when reversing the temperature bias.In addition,effects of the liquid density,solid–liquid bonding strength and nanostructure size on the thermal rectification are examined.The findings may provide a new way for designs of certain thermal devices.

Orientation and Structure of Ionic Liquid Cation at Air/[bmim][BF4] Aqueous Solution Interface

watermiscible 房间温度离子的液体 1butyl3methylimidazolium tetrafluoroborate ([bmim ][BF4 ]) 是为学习在离子的液体和水分子之间的相互作用的一个模型系统。在这个工作低集中的水的解决方案的 orientational 结构[bmim ][BF4 ] 在空气 / 液体，接口被和频率产生调查震动的光谱学。在很低的集中，丁基链展出了一个重要笨拙的缺点，这被发现了，显示混乱符合构造；并且与在表面的一个相当小的倾斜角度面向的阳离子戒指。当集中增加了时，阳离子戒指趋于在表面，和丁基链的笨拙的缺点完全躺着由于分子间的 chainchain 相互作用减少了并且作为结果更多的订的界面的分子的安排。另外，在 PPP 和 SPS 系列的反对称的拉长模式展出了山峰移动，证明那在那里多于为丁基 CH3 组的一个种取向或化学环境存在。这些结果可以在理解象 imidazolium 一样的离子的液体基于的 watermiscible 的表面行为上打开新灯表面活化剂。

Passivating buried interface with multifunctional novel ionic liquid containing simultaneously fluorinated anion and cation yielding stable perovskite solar cells over 23% efficiency

Interfacial defects and energy barrier would result in serious interfacial non-radiative recombination losses.In addition,the quality of perovskite films is highly dependent on deposition substrates.Consequently,there is an urgent desire to develop multifunctional interface modulators to manage the interface between electron transport layer and perovskite layer.Here,we report a multifunctional buried interface modulation strategy that 4-fluoro-phenylammonium tetrafluoroborate (FBABF_(4)) consisting of simultaneously fluorinated anion and cation is inserted between SnO_(2)layer and perovskite layer.It is uncovered by time-of-flight secondary ion mass spectroscopy that the anion and cation in modifier are mainly located at this interface,which is put down to coordination bond of the fluorine atom on BF_(4)^(-) with SnO_(2),and the hydrogen bond of the fluorine atom on FBA^(+) with formamidinium.This suggests that simultaneous fluorination of anion and cation in the ionic liquid molecule is of crucial importance to ameliorate interfacial contact through chemical linker.The interface modification approach enables the realization of interfacial defect passivation,interfacial energy band alignment modulation,and perovskite crystallization manipulation,which are translated into enhanced efficiency and stability as well as significantly suppressed hysteresis.The multiple functions of FBABF_(4) endow the modified solar cells excellent photovoltaic performance with an efficiency exceeding 23%along with appealing long-term stability.This work highlights the critical role of fluorination strategy in engineering multifunctional organic salt modulators for improving interfacial contact.

Insight into the behavior at the hygroscopicity and interface of the hydrophobic imidazolium-based ionic liquids

How to completely remove the water from ionic liquids(ILs)is difficult for researchers because of the hygroscopicity of ILs.In order to study the hygroscopicity of ILs,two kinds of ILs,1-Butyl-3-methylimidazolium hexafluorophosphate([Bmim][PF6])and 1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)([Bmim][NTf_(2)])were investigated by molecular dynamics simulations.Although[Bmim][PF6]and[Bmim][NTf_(2)]are hydrophobic,both of the ILs could absorb water molecules from the vapor.In this work,the process of absorbing water from the vapor phase was studied,and the water molecules could disperse into the IL.Aggregation was observed with increasing the water concentration.Although the absorbed water increases obviously,the amount of free water and small cluster in the ILs does not change significantly and always stays at a certain level.The amount of free water and small cluster in[Bmim][PF6]is more than that in[Bmim][NTf_(2)],which is consistent with their hydrophobicity.In addition,the liquid-vacuum and liquid–liquid interfaces of the ILs were simulated and analyzed in detail.The number density distribution and angle distribution indicated that[Bmim]+cations arrangement regularly at the IL-vacuum interface.The butyl chain point to the vacuum,while the imidazlium ring is close to the IL phase region and perpendicular to the interface.While at the IL-water interface,the cations and anions are disordered.

Ultralow Interfacial Thermal Resistance of Graphene Thermal Interface Materials with Surface Metal Liquefaction

Developing advanced thermal interface materials(TIMs)to bridge heat-generating chip and heat sink for constructing an efficient heat transfer interface is the key technology to solve the thermal management issue of high-power semiconductor devices.Based on the ultra-high basal-plane thermal conductivity,graphene is an ideal candidate for preparing high-performance TIMs,preferably to form a vertically aligned structure so that the basal-plane of graphene is consistent with the heat transfer direction of TIM.However,the actual interfacial heat transfer efficiency of currently reported vertically aligned graphene TIMs is far from satisfactory.In addition to the fact that the thermal conductivity of the vertically aligned TIMs can be further improved,another critical factor is the limited actual contact area leading to relatively high contact thermal resistance(20-30 K mm^(2) W^(−1))of the“solid-solid”mating interface formed by the vertical graphene and the rough chip/heat sink.To solve this common problem faced by vertically aligned graphene,in this work,we combined mechanical orientation and surface modification strategy to construct a three-tiered TIM composed of mainly vertically aligned graphene in the middle and micrometer-thick liquid metal as a cap layer on upper and lower surfaces.Based on rational graphene orientation regulation in the middle tier,the resultant graphene-based TIM exhibited an ultra-high thermal conductivity of 176 W m^(−1) K^(−1).Additionally,we demonstrated that the liquid metal cap layer in contact with the chip/heat sink forms a“liquid-solid”mating interface,significantly increasing the effective heat transfer area and giving a low contact thermal con-ductivity of 4-6 K mm^(2) W^(−1) under packaging conditions.This finding provides valuable guidance for the design of high-performance TIMs based on two-dimensional materials and improves the possibility of their practical application in electronic thermal management.

Microstructure and Solid/Liquid Interface Evolutions of Directionally Solidified Fe-Al-Ta Eutectic Alloy

A modified Bridgman directional solidification technique was used to prepare Fe-Al-Ta eutectic in situ composites at different growth rates ranging from 6 to 80 gm/s. The directionally solidified Fe- Al-Ta eutectic composites are composed of two phases: Fe(Al,Ta) matrix phase, and Fe2Ta(Al) Laves phase. Solidification microstructure is affected by solidification rate. Microstructure of the Fe-Al-Ta eutectic alloy grown at 6.0 pm/s is broken-lamellar eutectic. Eutectic colonies are formed with the increase of the solidification rate. Microstructures are mainly composed of the lamellar or fibrous eutectic at the center of the colony and coarse lamellar eutectic zone at the boundary. Meanwhile, the inter-lamellar spacing (or the inter-rod spacing) is decreased. The spacing adjustments are also observed in Fe-Al-Ta eutectic alloy. The solid/liquid interface evolves from planar interface to shallow cellular interface, then to deep cellular, and finally to shallow cellular planar with the increase of the solidification rate.

Effect of SDBS on interfacial electron transfer at the liquid/liquid interface by thin layer method

The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Unraveling abnormal buried interface anion defect passivation mechanisms depending on cation-induced steric hindrance for efficient and stable perovskite solar cells

Although ionic liquids(ILs)have been widely employed to heal the defects in perovskite solar cells(PSCs),the corresponding defect passivation mechanisms are not thoroughly understood up to now.Herein,we first reveal an abnormal buried interface anion defect passivation mechanism depending on cationinduced steric hindrance.The IL molecules containing the same anion([BF4]^(-))and different sizes of imidazolium cations induced by substituent size are used to manipulate buried interface.It was revealed what passivated interfacial defects is mainly anions instead of cations.Theoretical and experimental results demonstrate that the large-sized cations can weaken the ionic bond strength between anions and cations,and facilitate the interaction between anions and SnO2as well as perovskites,which is conducive to interfacial defect passivation and ameliorating interfacial contact.It can be concluded that interfacial chemical interaction strength and defect passivation effect are positively correlated with the size of cations.The discovery breaks conventional thinking that large-sized modification molecules would weaken their chemical interaction with perovskite.Compared with the control device(21.54%),the device based on 1,3-Bis(1-adamantyl)-imidazolium tetrafluoroborate(BAIMBF4)with maximum size cations achieves a significantly enhanced efficiency of 23.61%along with much increased moisture,thermal and light stabilities.

Voltammetric Studies on Heteropoly Phosphotungstovanadate Anions Across the Liquid/Liquid Interface

Electrochemical transfer behavior of V ⅤW 11 -V Ⅴ 3W 9 heteropoly anions on the water/nitrobenzene interface was investigated by means of cyclic voltammetry. The effect of the solution acidity on the transfer behavior and the stable pH range for the heteropoly anions were studied. The stability of mixed tungstovanadate decreases with increasing the number of vanadium atoms. The main transfer species within the potential window have the negative charges of 4 and the transfer process is diffusion controlled. The apparent transfer potential Δ w o Ψ 0 and the free energy Δ G 0 w→o tr for the heteropoly anions can be obtained from the experimental data. For the different anions, the Δ w o Ψ 1/2 pH relationship can be expressed as: Δ w o Ψ 1/2 =constant-53pH.

Diffusion-controlled Adsorption Kinetics of Surfactant at Air/Solution Interface

For the diffusion-controlled adsorption,the expression of dynamic surface adsorption(t)was obtained by solving the diffusion equation.Two cases,i.e.the short and long time limits,were mainly discussed in this paper.From the measured dynamic surface tension of aqueous surfactant sodium dodecyl sulfate(SDS) solutions at25 °C,the adsorption kinetics of SDS at air/solution interface was studied.It was proved that for both of the short and long time limits,the adsorption process of SDS was controlled by diffusion.

An APXPS endstation for gas–solid and liquid–solid interface studies at SSRF

In the past few decades, various surface analysis techniques find wide applications in studies of interfacial phenomena ranging from fundamental surface science,catalysis, environmental science and energy materials.With the help of bright synchrotron sources, many of these techniques have been further advanced into novel in-situ/operando tools at synchrotron user facilities, providing molecular level understanding of chemical/electrochemical processes in-situ at gas–solid and liquid–solid interfaces.Designing a proper endstation for a dedicated beamline is one of the challenges in utilizing these techniques efficiently for a variety of user's requests. Many factors,including pressure differential, geometry and energy of the photon source, sample and analyzer, need to be optimized for the system of interest. In this paper, we discuss the design and performance of a new endstation at beamline02 B at the Shanghai Synchrotron Radiation Facility for ambient pressure X-ray photoelectron spectroscopy studies.This system, equipped with the newly developed hightransmission HiPP-3 analyzer, is demonstrated to be capable of efficiently collecting photoelectrons up to 1500 eV from ultrahigh vacuum to ambient pressure of 20 mbar.The spectromicroscopy mode of HiPP-3 analyzer also enables detection of photoelectron spatial distribution with resolution of 2.8 ± 0.3 lm in one dimension. In addition,the designing strategies of systems that allow investigations in phenomena at gas–solid interface and liquid–solid interface will be highlighted through our discussion.

Orientation and Motion of Water Molecules at Air/Water Interface

这里，我们在空气 / 水接口报导 orientational 结构的量的研究和水分子的运动。和频率产生(SFG ) 的分析震动的山峰免费哦在四种试验性的配置在 3700 厘米 1 拉长乐队在空气 / 水显示出水分子的那个 orientational 运动接口在一个有限尖范围以内是摆动的。免费哦界面的水分子的债券在 33 附近被倾斜??啓???￣??啓??????????啓?￣橩?匯?????????瘠?啓??匯??瘠?啓??匯??瘠?啓??匯????匼???啓?????牡楬杮?湥楮潳??柳？？

Mathematical Modelling of Particle Movement Ahead of the Solid-liquid Interface in Continuous Casting

Whether the particle will be trapped by the solid-liquid interface or not is dependent on its moving behavior ahead of the interface, so a mathematical model has been developed to investigate the movement of the particle ahead of the solid-liquid interface. Based on the theory for the boundary layer, the fluid velocity field near the solid-liquid interface was obtained, and the trajectories of particles were calculated by the equations of motion for particles. In this model, the drag force, the added mass force, the buoyance force, the gravitational force, the Saffman force and the Basset history force are considered. The results show that the behavior of the particle ahead of the solid-liquid interface is affected by the physical property of the particle and fluid flow. And in the continuous casting process, if it moves in the stream directed upward or downward near vertical solid-liquid interface or in the horizontal flow under the solid-liquid interface, the particle with the diameter from 5 um to 60um can reach the solid-liquid interface. But if it moves in horizontal flow above the solid-liquid interface, only the particle with the diameter from 5 um to 10 um can reach the solid-liquid interface.

AN EXPERIMENTAL STUDY ON TURBULENT COHERENT STRUCTURES NEAR A SHEARED AIR-WATER INTERFACE

The turbulence structures near a sheared air-water interface were experimentally investigated with the hydrogen bubble visualization technique. Surface shear was imposed by an airflow over the water flow which was kept free from surface waves. Results show that the wind shear has the main influence on coherent structures under air-water interfaces. Low- and high- speed streaks form in the region close to the interface as a result of the imposed shear stress. When a certain airflow velocity is reached, “turbulent spots” appear randomly at low-speed streaks with some characteristics of hairpin vortices. At even higher shear rates, the flow near the interface is dominated primarily by intermittent bursting events. The coherent structures observed near sheared air-water interfaces show qualitative similarities with those occurring in near-wall turbulence. However, a few distinctive phenomena were also observed, including the fluctuating thickness of the instantaneous boundary layer and vertical vortices in bursting processes, which appear to be associated with the characteristics of air-water interfaces.

CO_2 exchange at air-sea interface in the Huanghai Sea

During the Huanghai Sea Circulation and Material Flux Expedition in Spring 1996, fco_2 in surface water and atmosphere was measured. The fco2 in surface water varied in a range from 220 to 360 uatm1) while atmospheric concentration was nearly constant at 360μatm, showing that the Huanghai Sea surface waters were undersaturated with respect to atmospheric Co during the time of investigation. A model was developed in this study in order to estimate the Co flux at the air-sea interface. The model incorporates the time-series variations of the distributions in SST (sea surface temperature), salinity, mixed-layer depth, atmospheric fco2, gas-transfer velocity, and CZCS chlorophyll concentration in the Huanghai Sea and was calibrated with the observed fco2 data. The primary parameter affecting fco2 in surface water is the variation of SST through time. The annual fluxes of Co are estimated as 0. 033 Gt C from the sea into the atmosphere and 0. 044 Gt C from the air into sea. The Huanghai Sea, thus behaves as a CO2 sink absorbing 0. 011 Gi C of CO2 a year. which.corresponds to about 0. 5 % of global oceanic absorption capacity.

MASS TRANSFER TO LIQUID-LIQUID INTERFACE

Experiments have been done on mass transfer to a liquid-liquid interface on which inert gas bubbles are sparged.To simulate the pyrometallurgy system of melten slag-metal(or matte),aqueous solution-mercury(or zinc amalgam) system was used.The mass transfer coefficients of indicator ions as a function of bubble parameters have been determined.The experimental results show satisfactory agreement with the mass transfer model proposed Previously.

Investigation of the Lipophilicity of 2-Benzoylpyridine-Thiosemicarbazone Based on the Ion Transfer across the Liquid/Liquid Interface

The ion transfer reaction of 2-benzoylpyridine-thiosemicarbazone (HL), which has antimicrobial and antifungal properties and anticancer activity, has been studied to determine its lipophilicity by cyclic voltammetry at the water/1,2-dichloroethane (1,2-DCE) interface. The physicochemical parameters such as standard partition coefficient (lgPI)andthestandardGibbsenergyoftransfer("G0tr,,wI "o)oftheprotonatedformoftheligandwere measured asa function of pH in aqueous phase. The protonated form of the ligand exhibited reversible or quasi-reversible voltammograms at the1,2-DCEintherangeofpH1-5.Theprotonationconstantsoftheligand,pKa1andpKa2,weredeterminedspectrophotometrically and were found to be 12.14 and 3.24, respectively. The standard Gibbs energy of transfer ("G0tr,,wN" o) and the partition coefficient of neutral species (lgPN) were also determined by the shake-flask method. The standard Gibbs energy of transfer of this compound across the water/1,2-DCE interface was evaluated as the quantitative measure of its lipophilicity. The difference between lgPI and lgPN was related to the degree of charge delocalization and was used to evaluate qualitatively the lipophilicity of the ligand.

SOME CHARACTERISTICS OF LOW-SPEED STREAKS UNDER SHEARED AIR-WATER INTERFACES

The characteristics of low-speed fluid streaks occurring under sheared air-water interfaces were examined by means of hydrogen bubble visualization technique. A critical shear condition under which the streaky structure first appears was determined to be u(tau) approximate to 0.19 cm/s. The mean spanwise streak spacing increases with distance from the water surface owing to merging and bursting processes, and a linear relationship describing variation of non-dimensional spacing <(<lambda>+)over bar> versus y(+) was found essentially independent of shear stress on the interface. Values of <(<lambda>+)over bar>, however, are remarkably smaller than their counterparts in the near-wall region of turbulent boundary layers. Though low-speed streaks occur randomly in time and space, the streak spacing exhibits a lognormal probability distribution behavior. A tentative explanation concerning the formation of streaky structure is suggested, and the fact that <(<lambda>+)over bar> takes rather smaller values than that in wall turbulence is briefly discussed.