Variational Assimilation of Satellite Cloud Water/Ice Path and Microphysics Scheme Sensitivity to the Assimilation of a Rainfall Case

Hydrometeor variables （cloud water and cloud ice mixing ratios） are added into the WRF three-dimensional variational assimilation system as additional control variables to directly analyze hydrometeors by assimilating cloud observations. In addition, the background error covariance matrix of hydrometeors is modeled through a control variable transform, and its characteristics discussed in detail. A suite of experiments using four microphysics schemes （LIN, SBU-YLIN, WDM6 and WSM6） are performed with and without assimilating satellite cloud liquid/ice water path. We find analysis of hydrometeors with cloud assimilation to be significantly improved, and the increment and distribution of hydrometeors are consistent with the characteristics of background error covariance. Diagnostic results suggest that the forecast with cloud assimilation represents a significant improvement, especially the ability to forecast precipitation in the first seven hours. It is also found that the largest improvement occurs in the experiment using the WDM6 scheme, since the assimilated cloud information can sustain for longer in this scheme. The least improvement, meanwhile, appears in the experiment using the SBU-YLIN scheme.

Two-moment Bulk Stratiform Cloud Microphysics in the Grid-point Atmospheric Model of IAP LASG (GAMIL)

A two-moment bulk stratiform microphysics scheme, including recently developed physically-based droplet activation/ice nucleation parameterizations has been implemented into the Grid-point Atmospheric Model of IAP LASG （GAMIL） as an effort to enhance the model＇s capability to simulate aerosol indirect effects. Unlike the previous one-moment cloud microphysics scheme, the new scheme produces a reasonable rep- resentation of cloud particle size and number concentration. This scheme captures the observed spatial variations in cloud droplet number concentrations. Simulated ice crystal number concentrations in cirrus clouds qualitatively agree with in situ observations. The longwave and shortwave cloud forcings are in better agreement with observations. Sensitivity tests show that the column cloud droplet number concentrations calculated from two different droplet activation parameterizations are similar. However, ice crystal number concentration in mixed-phased clouds is sensitive to different heterogeneous ice nucleation formulations. The simulation with high ice crystal number concentration in mixed-phase clouds has less liquid water path and weaker cloud forcing. ~rthermore, ice crystal number concentration in cirrus clouds is sensitive to different ice nucleation parameterizations. Sensitivity tests also suggest that the impact of pre-existing ice crystals on homogeneous freezing in old clouds should be taken into account.

Numerical Simulation of Microphysics in Meso-β-Scale Convective Cloud System Associated with a Mesoscale Convective Complex

Numerical simulation of meso-β-scale convective cloud systems associated with a PRE-STORM MCC case has been carried out using a 2-D version of the CSU Regional Atmospheric Modeling System (RAMS) nonhydrostatic model with parameterized microphysics. It is found that the predicted meso-r-scale convective phenomena arc basically unsteady under the situation of strong shear at low-levels, while the meso-β-scale convective system is maintained up to 3 hours or more. The meso -β- scale cloud system exhibits characteristics of a multi-celled convective storm in which the meso-r-scale convective cells have lifetime of about 30 min. Pressure perturbation depicts a meso-low after a half hour in the low levels. As the cloud system evolves, the meso-low intensifies and extends to the upshear side and covers the entire domain in the mid-lower levels with the peak values of 5-8 hPa. Temperature perturbation depicts a warm region in the middle levels through the entire simulation period. The meso-r-scale warm cores with peak values of 4-8 ℃ are associated with strong convective cells. The cloud top evaporation causes a stronger cold layer around the cloud top levels.Simulation of microphysics exhibits that graupel is primarily concentrated in the strong convective cells forming the main source of convective rainfall after one hour of simulation time. Aggregates are mainly located in the stratiform region and decaying convective cells which produce the stratiform rainfall. Riming of the ice crystals is the predominant precipitation formation mechanism in the convection region, whereas aggregation of ice crystals is the predominant one in the stratiform region, which is consistent with observations. Sensitivity experiments of ice-phase mierophysical processes show that the microphysical structures of the convective cloud system can be simulated better with the diagnosed aggregation collection efficiencies.

Impact of Different Cloud Microphysics Parameterization Schemes on Typhoon Intensity and Structure

The impact of different cloud microphysics parameterization schemes on the intensity and structure of the Super-strong Typhoon Rammasun(1409)in 2014 is investigated using the Weather Research and Forecasting model version 3.4 with eight cloud microphysics parameterization schemes.Results indicate that the uncertainty of cloud microphysics schemes results in typhoon forecast uncertainties,which increase with forecast time.Typhoon forecast uncertainty primarily affects intensity predictions,with significant differences in predicted typhoon intensity using various cloud microphysics schemes.Typhoon forecast uncertainty also affects the predicted typhoon structure.Greater typhoon intensity is accompanied by smaller vortex width,tighter vortex structure,stronger wind in the middle and lower troposphere,greater height of the strong wind region,smaller thickness of the eyewall and the outward extension of the eyewall,and a warmer warm core at upper levels of the eye.The differences among the various cloud microphysics schemes lead to different amounts and distributions of water vapor and hydrometeors in clouds.Different hydrometeors have different vertical distributions.In the radial direction,the maxima for the various hydrometeors forecast by a single cloud microphysics scheme are collocated with each other and with the center of maximum precipitation.When the hydrometeor concentration is high and hydrometeors exist at lower altitudes,more precipitation often occurs.Both the vertical and horizontal winds are the strongest at the location of maximum precipitation.Results also indicate that typhoon intensities forecast by cloud microphysics schemes containing graupel processes are noticeably greater than those forecast by schemes without graupel processes.Among the eight cloud microphysics schemes investigated,typhoon intensity forecasts using the WRF Single-Moment 6-class and Thompson schemes are the most accurate.

LASG Global AGCM with a Two-moment Cloud Microphysics Scheme:Energy Balance and Cloud Radiative Forcing Characteristics

Cloud dominates influence factors of atmospheric radiation, while aerosol–cloud interactions are of vital importance in its spatiotemporal distribution. In this study, a two-moment(mass and number) cloud microphysics scheme, which significantly improved the treatment of the coupled processes of aerosols and clouds, was incorporated into version 1.1 of the IAP/LASG global Finite-volume Atmospheric Model(FAMIL1.1). For illustrative purposes, the characteristics of the energy balance and cloud radiative forcing(CRF) in an AMIP-type simulation with prescribed aerosols were compared with those in observational/reanalysis data. Even within the constraints of the prescribed aerosol mass, the model simulated global mean energy balance at the top of the atmosphere(TOA) and at the Earth’s surface, as well as their seasonal variation, are in good agreement with the observational data. The maximum deviation terms lie in the surface downwelling longwave radiation and surface latent heat flux, which are 3.5 W m-2(1%) and 3 W m-2(3.5%), individually. The spatial correlations of the annual TOA net radiation flux and the net CRF between simulation and observation were around 0.97 and 0.90, respectively. A major weakness is that FAMIL1.1 predicts more liquid water content and less ice water content over most oceans. Detailed comparisons are presented for a number of regions, with a focus on the Asian monsoon region(AMR). The results indicate that FAMIL1.1 well reproduces the summer–winter contrast for both the geographical distribution of the longwave CRF and shortwave CRF over the AMR. Finally, the model bias and possible solutions, as well as further works to develop FAMIL1.1 are discussed.

Parameterization and Explicit Modeling of Cloud Microphysics:Approaches, Challenges, and Future Directions

Cloud microphysical processes occur at the smallest end of scales among cloud-related processes and thus must be parameterized not only in large-scale global circulation models(GCMs)but also in various higher-resolution limited-area models such as cloud-resolving models(CRMs)and large-eddy simulation(LES)models.Instead of giving a comprehensive review of existing microphysical parameterizations that have been developed over the years,this study concentrates purposely on several topics that we believe are understudied but hold great potential for further advancing bulk microphysics parameterizations:multi-moment bulk microphysics parameterizations and the role of the spectral shape of hydrometeor size distributions;discrete vs“continuous”representation of hydrometeor types;turbulence-microphysics interactions including turbulent entrainment-mixing processes and stochastic condensation;theoretical foundations for the mathematical expressions used to describe hydrometeor size distributions and hydrometeor morphology;and approaches for developing bulk microphysics parameterizations.Also presented are the spectral bin scheme and particle-based scheme(especially,super-droplet method)for representing explicit microphysics.Their advantages and disadvantages are elucidated for constructing cloud models with detailed microphysics that are essential to developing processes understanding and bulk microphysics parameterizations.Particle-resolved direct numerical simulation(DNS)models are described as an emerging technique to investigate turbulence-microphysics interactions at the most fundamental level by tracking individual particles and resolving the smallest turbulent eddies in turbulent clouds.Outstanding challenges and future research directions are explored as well.

Dominant Cloud Microphysical Processes of a Torrential Rainfall Event in Sichuan, China

High-resolution numerical simulation data of a rainstorm triggering debris flow in Sichuan Province of China simulated by the Weather Research and Forecasting （WRF） Model were used to study the dominant cloud microphysical processes of the torrential rainfall.The results showed that：（1） In the strong precipitation period,particle sizes of all hydrometeors increased,and mean-mass diameters of graupel increased the most significantly,as compared with those in the weak precipitation period; （2） The terminal velocity of raindrops was the strongest among all hydrometeors,followed by graupel＇s,which was much smaller than that of raindrops.Differences between various hydrometeors＇ terminal velocities in the strong precipitation period were larger than those in the weak precipitation period,which favored relative motion,collection interaction and transformation between the particles.Absolute terminal velocity values of raindrops and graupel were significantly greater than those of air upward velocity,and the stronger the precipitation was,the greater the differences between them were; （3） The orders of magnitudes of the various hydrometeors＇ sources and sinks in the strong precipitation period were larger than those in the weak precipitation period,causing a difference in the intensity of precipitation.Water vapor,cloud water,raindrops,graupel and their exchange processes played a major role in the production of the torrential rainfall,and there were two main processes via which raindrops were generated：abundant water vapor condensed into cloud water and,on the one hand,accretion of cloud water by rain water formed rain water,while on the other hand,accretion of cloud water by graupel formed graupel,and then the melting of graupel formed rain water.

Retrieving Microphysical Properties and Air Motion of Cirrus Clouds Based on the Doppler Moments Method Using Cloud Radar

Radar parameters including radar reflectivity, Doppler velocity, and Doppler spectrum width were obtained from Doppler spectrum moments. The Doppler spectrum moment is the convolution of both the particle spectrum and the mean air vertical motion. Unlike strong precipitation, the motion of particles in cirrus clouds is quite close to the air motion around them. In this study, a method of Doppler moments was developed and used to retrieve cirrus cloud microphysical properties such as the mean air vertical velocity, mass-weighted diameter, effective particle size, and ice content. Ice content values were retrieved using both the Doppler spectrum method and classic Z-IWC （radar reflectivity-ice water content） relationships; however, the former is a more reasonable method.

NUMERICAL SIMULATION OF CLOUD MICROPHYSICAL CHARACTERISTICS OF LANDFALL TYPHOON KROSA

In this study,the super typhoon KROSA(2007)was simulated using a mesoscale numerical model Global and Regional Assimilation and Prediction System(GRAPES)with a two-moment mixed-phase microphysics scheme.Local rainfall observations,radar and satellite data were also used to analyze the precipitation structure and microphysical features.It was shown that low-level jets and unstable temperature stratification provided this precipitation process with favorable weather condition.Heavy rainfall centers were located in the north and east part of KROSA with the maxima of 6-hourly total rainfall during the simulation more than 100 mm.The quantities of column solid water and column liquid water were generally equivalent,indicating the important role of ice phase in precipitation formation.Results of CloudSat showed that strong convection occurred in the eyewall around the cyclonic center.According to the simulation results,heavy precipitation in the northeast part of the typhoon was mainly triggered by convective clouds,accompanied by the strongest updraft under the melting level.In the southwest part of KROSA,precipitation intensity was rather homogeneous.The ascending center occurred in high-level cold clouds,favoring the formation and growth of ice particles.

A STUDY OF THE INFLUENCE OF MICROPHYSICAL PROCESSES ON TYPHOON NIDA(2016) USING A NEW DOUBLE-MOMENT MICROPHYSICS SCHEME IN THE WEATHER RESEARCH AND FORECASTING MODEL

The basic structure and cloud features of Typhoon Nida(2016) are simulated using a new microphysics scheme(Liuma) within the Weather Research and Forecasting(WRF) model. Typhoon characteristics simulated with the Liuma microphysics scheme are compared with observations and those simulated with a commonly-used microphysics scheme(WSM6). Results show that using different microphysics schemes does not significantly alter the track of the typhoon but does significantly affect the intensity and the cloud structure of the typhoon. Results also show that the vertical distribution of cloud hydrometeors and the horizontal distribution of peripheral rainband are affected by the microphysics scheme. The mixing ratios of rain water and graupel correlate highly with the vertical velocity component and equivalent potential temperature at the typhoon eye-wall region. According to the simulation with WSM 6 scheme,it is likely that the very low typhoon central pressure results from the positive feedback between hydrometeors and typhoon intensity. As the ice-phase hydrometeors are mostly graupel in the Liuma microphysics scheme, further improvement in this aspect is required.

Cloud microphysical differences with precipitation intensity in a torrential rainfall event in Sichuan, China

High-resolution data of a torrential rainfall event in Sichuan, China, simulated by the WRF model, were used to analyze the cloud microphysical differences with precipitation intensity. Sixhourly accumulated rainfall was classified into five bins based on rainfall intensity, and the cloud microphysical characteristics and processes in different bins were studied. The results show that：（1） Hydrometeor content differed distinctly among different bins. Mixing ratios of cloud water, rain water, and graupel enhanced significantly and monotonously with increasing rainfall intensity. With increasing precipitation intensity, the monotonous increase in cloud water number concentration was significant. Meanwhile, number concentrations of rain water and graupel increased at first and then decreased or increased slowly in larger rainfall bins.（2） With precipitation intensity increasing, cloud microphysical conversion processes closely related to the production of rainwater, directly（accretion of cloud water by rain（QCLcr） and melting of graupel（QMLgr）） or indirectly（water vapor condensation and accretion of cloud water by graupel）, increased significantly.（3） As the two main sources of rainwater, QCLcrincreased monotonously with increasing precipitation intensity, while QMLgr increased slowly, even tending to cease increasing in larger rainfall bins.

SENSITIVITY OF LANDFALLING TYPHOON STRUCTURE AND PRECIPITATION TO VARYING CLOUD MICROPHYSICAL PROCESSES

Typhoon KROSA in 2007 is simulated using GRAPES,a mesoscale numerical model,in which a two-parameter mixed-phase microphysics scheme is implanted.A series of numerical experiments are designed to test the sensitivity of landfalling typhoon structure and precipitation to varying cloud microphysics and latent heat release.It is found that typhoon track is sensitive to different microphysical processes and latent heat release.The cloud structures of simulated cyclones can be quite different with that of varying microphysical processes.Graupel particles play an important role in the formation of local heavy rainfall and the maintenance of spiral rainbands.Analysis reveals that the feedback of latent heat to dynamic fields can significantly change the content and distribution of cloud hydrometeors,thus having an impact on surface precipitation.

Aircraft observation of cloud microphysical characteristics of pre-stratiform-cloud precipitation in Jiangxi Province

Based on Droplet Measurement Technologies data of a pre-stratiform-cloud precipitation event in Ganzhou, Jiangxi Province, on 11 November 2015, and combined with radar data, this paper comprehensively analyzes the macro-and microphysical characteristics of cloud in the upper trough.The results show that：（1） Detection takes place in the early stage of precipitation and the cloud has multiple layers. The cloud type is stratiform（Sc） and the height of the cloud base is 1009 m, 1009–1700 m is the low Sc layer, 1700–3000 m is the no-cloud level, and 3000 to the maximum height detected is another Sc layer.（2） The Sc is inhomogeneous in the horizontal and vertical directions.The particle number concentration and the effective diameter below the 0 °C layer is significantly higher than that above the 0 °C layer, which is in accordance with the ‘seeder–feeder＇ mechanism.Above the 0 °C layer is seeder cloud, where needle, column ice crystals and water droplets coexist,and sublimation and coalescence are the main processes. The morphology of ice crystals changes from needle to column, plate, and polymer as height decreases. Below the 0 °C warm layer is a supply cloud, and the particles develop in the supply cloud with abundant liquid water content. Ice melting and coalescence dominate the warm layer, which makes the effective diameter significantly increase. Down to 4150 m, the ice melts completely into raindrops.

Aerosol Microphysical and Radiative Effects on Continental Cloud Ensembles

Aerosol-cloud-radiation interactions represent one of the largest uncertainties in the current climate assessment. Much of the complexity arises from the non-monotonic responses of clouds, precipitation and radiative fluxes to aerosol perturbations under various meteorological conditions. In this study, an aerosol-aware WRF model is used to investigate the microphysical and radiative effects of aerosols in three weather systems during the March 2000 Cloud Intensive Observational Period campaign at the US Southern Great Plains. Three simulated cloud ensembles include a low-pressure deep convective cloud system, a collection of less-precipitating stratus and shallow cumulus, and a cold frontal passage. The WRF simulations are evaluated by several ground-based measurements. The microphysical properties of cloud hydrometeors, such as their mass and number concentrations, generally show monotonic trends as a function of cloud condensation nuclei concentrations. Aerosol radiative effects do not influence the trends of cloud microphysics, except for the stratus and shallow cumulus cases where aerosol semi-direct effects are identified. The precipitation changes by aerosols vary with the cloud types and their evolving stages, with a prominent aerosol invigoration effect and associated enhanced precipitation from the convective sources. The simulated aerosol direct effect suppresses precipitation in all three cases but does not overturn the aerosol indirect effect. Cloud fraction exhibits much smaller sensitivity （typically less than 2%） to aerosol perturbations, and the responses vary with aerosol concentrations and cloud regimes. The surface shortwave radiation shows a monotonic decrease by increasing aerosols, while the magnitude of the decrease depends on the cloud type.

AN SENSITIVITY SIMULATION ABOUT CLOUD MICROPHYSICAL PROCESSES OF TYPHOON CHANCHU

With the Reisner-2 bulk microphysical parameterization of the fifth-generation Pennsylvania State University-U.S. National Center for Atmospheric Research （PSU--NCAR） Mesoscale Model （MM5）, this paper investigates the microphysical sensitivities of Typhoon Chanchu. Four different microphysical sensitivity experiments were designed with an objective to evaluate their respective impacts in modulating intensity forecasts and microphysics budgets of the typhoon. The set of sensitivity experiments were conducted that comprised （a） a control experiment （CTL）, （b） NEVPRW from which evaporation of rain water was suppressed, （c） NGP from which graupel was taken, and （d） NMLT from which melting of snow and graupel was removed. We studied the impacts of different cloud microphysical processes on the track, intensity and precipitation of the typhoon, as well as the kinematics, thermodynamics and vertical structural characteristics of hydrometeors in the inner core of the typhoon. Additionally, the budgets of the cloud microphysical processes in the fine domain were calculated to quantify the importance of each microphysical process for every sensitivity experiment. The primary results are as follows： （1） It is found that varying cloud microphysics parameters produce little sensitivity in typhoon track experiments. （2） The experiment of NGP produces the weakest storm, while the experiment of NMLT produces the strongest storm, and the experiment of NEVPRW also produces stronger storms than CTL. （3） Varying parameters of cloud rnicrophysics have obvious impacts on the precipitation, kinematics, and thermodynamics of the typhoon and the vertical structural characteristics of hydrometeors in the typhoon＇s inner core. （4） Most budgets of cloud microphysics in NMLT are larger than in CTL, while they are 20%-60% smaller in NEVPRW than in CTL.

Effects of sea surface temperature,cloud radiative and microphysical processes,and diurnal variations on rainfall in equilibrium cloud-resolving model simulations

The effects of sea surface temperature（SST）,cloud radiative and microphysical processes,and diurnal variations on rainfall statistics are documented with grid data from the two-dimensional equilibrium cloud-resolving model simulations.For a rain rate of higher than 3 mm.h 1,water vapor convergence prevails.The rainfall amount decreases with the decrease of SST from 29℃ to 27℃,the inclusion of diurnal variation of SST,or the exclusion of microphysical effects of ice clouds and radiative effects of water clouds,which are primarily associated with the decreases in water vapor convergence.However,the amount of rainfall increases with the increase of SST from 29℃ to 31℃,the exclusion of diurnal variation of solar zenith angle,and the exclusion of the radiative effects of ice clouds,which are primarily related to increases in water vapor convergence.For a rain rate of less than 3 mm.h 1,water vapor divergence prevails.Unlike rainfall statistics for rain rates of higher than 3 mm.h 1,the decrease of SST from 29℃ to 27℃ and the exclusion of radiative effects of water clouds in the presence of radiative effects of ice clouds increase the rainfall amount,which corresponds to the suppression in water vapor divergence.The exclusion of microphysical effects of ice clouds decreases the amount of rainfall,which corresponds to the enhancement in water vapor divergence.The amount of rainfall is less sensitive to the increase of SST from 29℃ to 31℃ and to the radiative effects of water clouds in the absence of the radiative effects of ice clouds.

A Modified Double-Moment Bulk Microphysics Scheme Geared toward the East Asian Monsoon Region

Representation of cloud microphysical processes is one of the key aspects of numerical models.An improved double-moment bulk cloud microphysics scheme(named IMY)was created based on the standard Milbrandt-Yau(MY)scheme in the Weather Research and Forecasting(WRF)model for the East Asian monsoon region(EAMR).In the IMY scheme,the shape parameters of raindrops,snow particles,and cloud droplet size distributions are variables instead of fixed constants.Specifically,the shape parameters of raindrop and snow size distributions are diagnosed from their respective shape-slope relationships.The shape parameter for the cloud droplet size distribution depends on the total cloud droplet number concentration.In addition,a series of minor improvements involving detailed cloud processes have also been incorporated.The improved scheme was coupled into the WRF model and tested on two heavy rainfall cases over the EAMR.The IMY scheme is shown to reproduce the overall spatial distribution of rainfall and its temporal evolution,evidenced by comparing the modeled results with surface gauge observations.The simulations also successfully capture the cloud features by using satellite and ground-based radar observations as a reference.The IMY has yielded simulation results on the case studies that were comparable,and in ways superior to MY,indicating that the improved scheme shows promise.Although the simulations demonstrated a positive performance evaluation for the IMY scheme,continued experiments are required to further validate the scheme with different weather events.

The Microphysical Characteristics of Wintertime Cold Clouds in North China

The microphysical characteristics of wintertime cold clouds in North China were investigated from 22 aircraft observation flights from 2014 to 2017,2020,and 2021.The clouds were generated by mesoscale weather systems with little orographic component.Over the mixed-phase temperature range(–40℃to 0℃),the average fraction of liquid,mixedphase,and ice cloud was 4.9%,23.3%,and 71.8%,respectively,and the probability distribution of ice mass fraction was a half-U-shape,suggesting that ice cloud was the primary cloud type.The wintertime mixed-phase clouds in North China were characterized by large cloud droplet number concentration,small liquid water content(LWC),and small effective diameter of cloud droplets.The main reason for larger cloud droplet number concentration and smaller effective diameter of cloud droplets was the heavy pollution in winter in North China,while for smaller LWC was the lower temperature during flights and the difference in air mass type.With the temperature increasing,cloud droplet number concentration,LWC,and the size of ice particles increased,but ice number concentration and effective diameter of cloud droplets decreased,similar to other mid-latitude regions,indicating the similarity in the temperature dependence of cloud properties of mixed-phase clouds.The variation of the cloud properties and ice habit at different temperatures indicated the operation of the aggregation and riming processes,which were commonly present in the wintertime mixed-phase clouds.This study fills a gap in the aircraft observation of wintertime cold clouds in North China.

Microphysical characteristics of precipitating cumulus cloud based on airborne Ka-band cloud radar and droplet measurements

Based on cloud-probe data and airborne Ka-band cloud radar data collected in Baoding on 5 August 2018,the microphysical structural characteristics of cumulus(Cu)cloud at the precipitation stage were investigated.The cloud droplets in the Cu cloud were found to be significantly larger than those in stratiform(STF)cloud.In the Cu cloud,most cloud particles were between 7 and 10μm in diameter,while in the STF cloud the majority of cloud particles grew no larger than 2μm.The sensitivity of cloud properties to aerosols varied with height.The cloud droplet effective radius showed a negative relationship with the aerosol number concentration(Na)in the cloud planetary boundary layer(PBL)and upper layer above the PBL.However,the cloud droplet concentration(Nc)varied little with decreased Na in the high liquid water content region above 1500 m.High Na values of between 300 and 1853 cm-3 were found in the PBL,and the maximum Na was sampled near the surface in August in the Hebei region,which was lower than that in autumn and winter.High radar reflectivity corresponded to large FCDP(fast cloud droplet probe)particle concentrations and small aerosol particle concentrations,and vice versa for low radar reflectivity.Strong updrafts in the Cu cloud increased the peak radius and Nc,and broadened cloud droplet spectrum;lower air temperature was favorable for particle condensational growth and produced larger droplets.

Scaling the Microphysics Equations and Analyzing the Variability of Hydrometeor Production Rates in a Controlled Parameter Space

A set of microphysics equations is scaled based on the convective length and velocity scales. Comparisons are made among the dynamical transport and various microphysical processes. From the scaling analysis, it becomes apparent which parameterized microphysical processes present off-scaled influences in the integration of the set of microphysics equations. The variabilities of the parameterized microphysical processes are also studied using the approach of a controlled parameter space. Given macroscopic dynamic and thermodynamic conditions in different regions of convective storms, it is possible to analyze and compare vertical profiles of these processes. Bulk diabatic heating profiles for a cumulus convective updraft and downdraft are also derived from this analysis. From the two different angles, the scale analysis and the controlled-parameter space approach can both provide an insight into and an understanding of microphysics parameterizations.