Lithium element has attracted remarkable attraction for energy storage devices, over the past 30 years. Lithium is a light element and exhibits the low atomic number 3, just after hydrogen and helium in the periodic t...Lithium element has attracted remarkable attraction for energy storage devices, over the past 30 years. Lithium is a light element and exhibits the low atomic number 3, just after hydrogen and helium in the periodic table. The lithium atom has a strong tendency to release one electron and constitute a positive charge, as Li<sup> </sup>. Initially, lithium metal was employed as a negative electrode, which released electrons. However, it was observed that its structure changed after the repetition of charge-discharge cycles. To remedy this, the cathode mainly consisted of layer metal oxide and olive, e.g., cobalt oxide, LiFePO<sub>4</sub>, etc., along with some contents of lithium, while the anode was assembled by graphite and silicon, etc. Moreover, the electrolyte was prepared using the lithium salt in a suitable solvent to attain a greater concentration of lithium ions. Owing to the lithium ions’ role, the battery’s name was mentioned as a lithium-ion battery. Herein, the presented work describes the working and operational mechanism of the lithium-ion battery. Further, the lithium-ion batteries’ general view and future prospects have also been elaborated.展开更多
A two-dimensional model for transport and the coupled electric field is applied to simulate a charging lithium-ion cell and investigate the effects of lithium concentration gradients within electrodes on cell performa...A two-dimensional model for transport and the coupled electric field is applied to simulate a charging lithium-ion cell and investigate the effects of lithium concentration gradients within electrodes on cell performance. The lithium concentration gradients within electrodes are affected by the cell geometry. Two different geometries are investigated: extending the length of the electrolyte past the edges of the electrodes and extending the length of the cathode past the edge of the anode. It is found that the electrolyte extension has little impact on the behavior of the electrodes, although it does increase the effective conductivity of the electrolyte in the edge region. However, the extension of the cathode past the edge of the anode, and the possibility for electrochemical reactions on the flooded electrode edges, are both found to impact the concentration gradients of lithium in electrodes and the current distribution within the electrolyte during charging. It is found that concentration gradients of lithium within electrodes may have stronger impacts on electrolytic current distributions, depending on the level of completeness of cell charge. This is because very different gradients of electric potential are expected from similar electrode gradients of lithium concentrations at different levels of cell charge, especially for the LixC6 cathode investigated in this study. This leads to the prediction of significant electric potential gradients along the electrolyte length during early cell charging, and a reduced risk of lithium deposition on the cathode edge during later cell charging, as seen experimentally by others.展开更多
Lignin is a cheap, abundant and non-toxic group of complex phenolic polymers obtained in large amounts from the papermaking and cellulosic biofuel industries. Although the application of lignin has been ex- plored in ...Lignin is a cheap, abundant and non-toxic group of complex phenolic polymers obtained in large amounts from the papermaking and cellulosic biofuel industries. Although the application of lignin has been ex- plored in these and several more industries, there are limited applications of lignin in the energy industry. However, numerous research revealed a great interest in the exploration of this renewable biopolymer in storage energy devices. Some of these applications include the use of lignin as an expander for lead-acid batteries, electrodes for primary and rechargeable batteries, electrodes for electronic double layer capac- itors and electrochemical pseudocapacitors, and to feed different types of fuel cells. The use of lignin in energy storage devices improves not only the performance of these devices but also decreases the price and toxicity, contributing to obtaining greener energy devices. Based on the above, this review provides an overview of the main research work related to the use of lignin as a renewable component, suitable to replace some synthetic and toxic compounds used in the fabrication of energy storage devices with particular emphasis on batteries, advanced supercapacitors, and solar and fuel cells.展开更多
Li Fe PO4/C was prepared via solid state reaction and characterized with X-ray powder diffraction and charge–discharge test. As-prepared Li Fe PO4/C has a triphylite structure and exhibits an excellent rate capabilit...Li Fe PO4/C was prepared via solid state reaction and characterized with X-ray powder diffraction and charge–discharge test. As-prepared Li Fe PO4/C has a triphylite structure and exhibits an excellent rate capability and capacity retention. Electrochemical impedance spectroscopy(EIS) was applied to investigate LixFe PO4/C(0<x<1) electrode on temperature variation. The valid equivalent circuit for EIS fitting was determined which contains an intercalation capacitance for Li+ ion accumulation and consumption in the electrode reaction. The surface layer impedance needs to be included in the equivalent circuit when Li Fe PO4/C is deeply delithiated at a relatively high temperature. EIS examination indicates that a temperature rise leads to a better reversibility, lower charge transfer resistance, higher exchange current density J0 and greater Li+ ion diffusion coefficient for the LixFe PO4/C electrode process. The Li+ ion concentration in LixFe PO4/C is potential to impact the Li+ ion diffusion coefficient, and a decrease in the former results in an increase in the latter.展开更多
The world has entered an era featured with fast transportations,instant communications,and prompt technological revolutions,the further advancement of which all relies fundamentally,yet,on the development of cost-effe...The world has entered an era featured with fast transportations,instant communications,and prompt technological revolutions,the further advancement of which all relies fundamentally,yet,on the development of cost-effective energy resources allowing for durable and high-rate energy supply.Current battery and fuel cell systems are challenged by a few issues characterized either by insufficient energy capacity or by operation instability and,thus,are not ideal for such highly-demanded applications as electrical vehicles and portable electronic devices.In this mini-review,we present,from materials perspectives,a few selected important breakthroughs in energy resources employed in these applications.Prospectives are then given to look towards future research activities for seeking viable materials solutions for addressing the capacity,durability,and cost shortcomings associated with current battery/fuel cell devices.展开更多
100-W class power storage systems were developed, which comprised spherical Si solar cells, a maximum power point tracking charge control-ler, a lithium-ion battery, and one of two different types of direct current (D...100-W class power storage systems were developed, which comprised spherical Si solar cells, a maximum power point tracking charge control-ler, a lithium-ion battery, and one of two different types of direct current (DC)-alter- nating current (AC) converters. One inverter used SiC met-al-oxide-semicon-ductor field-effect transistors (MOSFETs) as switching devices while the other used Si MOSFETs. In these 100-W class inverters, the ON resistance was considered to have little influence on the efficiency. Nevertheless, the SiC-based inverter exhibited an approximately 3% higher DC-AC conversion efficiency than the Si-based inverter. Power loss analysis indicated that the higher efficiency resulted predominantly from lower switching and reverse recovery losses in the SiC MOSFETs compared with in the Si MOSFETs.展开更多
Lithium-ion batteries have emerged as the best portable energy storage device for the consumer electronics market. Recent progress in the development of lithium- ion batteries has been achieved by the use of selected ...Lithium-ion batteries have emerged as the best portable energy storage device for the consumer electronics market. Recent progress in the development of lithium- ion batteries has been achieved by the use of selected anode materials, which have driven improvements in performance in terms of capadty, cyclic stability, and rate capability. In this regard, research focusing on the design and electrochemical performance of full cell lithium-ion batteries, utilizing newly developed anode materials, has been widely reported, and great strides in development have been made. Nanostructured anode materials have contributed largely to the development of full cell lithium-ion batteries. With this in mind, we summarize the impact of nanostructured anode materials in the performance of coin cell full lithium-ion batteries. This review also discusses the challenges and prospects of research into full cell lithium-ion batteries.展开更多
1 Results An inverse spinel LiCoVO4 cathode material was synthesized by a citric acid-urea polymeric method, calcined at 773 K for 5 h. The synthesized LiCoVO4 sample was surface modified with various wt.% of La2O3 by...1 Results An inverse spinel LiCoVO4 cathode material was synthesized by a citric acid-urea polymeric method, calcined at 773 K for 5 h. The synthesized LiCoVO4 sample was surface modified with various wt.% of La2O3 by a polymeric process, calcined at 873 K for 2 h. The samples were characterized by XRD, FTIR, SEM, and TEM techniques. XRD patterns exposed that single-phase crystallinity occurred when they were heated at 773 K for 5 h in air. For the La2O3 coated samples, there was no evident signal corre...展开更多
文摘Lithium element has attracted remarkable attraction for energy storage devices, over the past 30 years. Lithium is a light element and exhibits the low atomic number 3, just after hydrogen and helium in the periodic table. The lithium atom has a strong tendency to release one electron and constitute a positive charge, as Li<sup> </sup>. Initially, lithium metal was employed as a negative electrode, which released electrons. However, it was observed that its structure changed after the repetition of charge-discharge cycles. To remedy this, the cathode mainly consisted of layer metal oxide and olive, e.g., cobalt oxide, LiFePO<sub>4</sub>, etc., along with some contents of lithium, while the anode was assembled by graphite and silicon, etc. Moreover, the electrolyte was prepared using the lithium salt in a suitable solvent to attain a greater concentration of lithium ions. Owing to the lithium ions’ role, the battery’s name was mentioned as a lithium-ion battery. Herein, the presented work describes the working and operational mechanism of the lithium-ion battery. Further, the lithium-ion batteries’ general view and future prospects have also been elaborated.
文摘A two-dimensional model for transport and the coupled electric field is applied to simulate a charging lithium-ion cell and investigate the effects of lithium concentration gradients within electrodes on cell performance. The lithium concentration gradients within electrodes are affected by the cell geometry. Two different geometries are investigated: extending the length of the electrolyte past the edges of the electrodes and extending the length of the cathode past the edge of the anode. It is found that the electrolyte extension has little impact on the behavior of the electrodes, although it does increase the effective conductivity of the electrolyte in the edge region. However, the extension of the cathode past the edge of the anode, and the possibility for electrochemical reactions on the flooded electrode edges, are both found to impact the concentration gradients of lithium in electrodes and the current distribution within the electrolyte during charging. It is found that concentration gradients of lithium within electrodes may have stronger impacts on electrolytic current distributions, depending on the level of completeness of cell charge. This is because very different gradients of electric potential are expected from similar electrode gradients of lithium concentrations at different levels of cell charge, especially for the LixC6 cathode investigated in this study. This leads to the prediction of significant electric potential gradients along the electrolyte length during early cell charging, and a reduced risk of lithium deposition on the cathode edge during later cell charging, as seen experimentally by others.
文摘Lignin is a cheap, abundant and non-toxic group of complex phenolic polymers obtained in large amounts from the papermaking and cellulosic biofuel industries. Although the application of lignin has been ex- plored in these and several more industries, there are limited applications of lignin in the energy industry. However, numerous research revealed a great interest in the exploration of this renewable biopolymer in storage energy devices. Some of these applications include the use of lignin as an expander for lead-acid batteries, electrodes for primary and rechargeable batteries, electrodes for electronic double layer capac- itors and electrochemical pseudocapacitors, and to feed different types of fuel cells. The use of lignin in energy storage devices improves not only the performance of these devices but also decreases the price and toxicity, contributing to obtaining greener energy devices. Based on the above, this review provides an overview of the main research work related to the use of lignin as a renewable component, suitable to replace some synthetic and toxic compounds used in the fabrication of energy storage devices with particular emphasis on batteries, advanced supercapacitors, and solar and fuel cells.
基金Project(2010ZC051)supported by the Natural Science Foundation of Yunnan Province,ChinaProject(20140439)supported by Analysis and Testing Foundation from Kunming University of Science and Technology,ChinaProject(14118245)supported by Starting Research Fund from Kunming University of Science and Technology,China
文摘Li Fe PO4/C was prepared via solid state reaction and characterized with X-ray powder diffraction and charge–discharge test. As-prepared Li Fe PO4/C has a triphylite structure and exhibits an excellent rate capability and capacity retention. Electrochemical impedance spectroscopy(EIS) was applied to investigate LixFe PO4/C(0<x<1) electrode on temperature variation. The valid equivalent circuit for EIS fitting was determined which contains an intercalation capacitance for Li+ ion accumulation and consumption in the electrode reaction. The surface layer impedance needs to be included in the equivalent circuit when Li Fe PO4/C is deeply delithiated at a relatively high temperature. EIS examination indicates that a temperature rise leads to a better reversibility, lower charge transfer resistance, higher exchange current density J0 and greater Li+ ion diffusion coefficient for the LixFe PO4/C electrode process. The Li+ ion concentration in LixFe PO4/C is potential to impact the Li+ ion diffusion coefficient, and a decrease in the former results in an increase in the latter.
文摘The world has entered an era featured with fast transportations,instant communications,and prompt technological revolutions,the further advancement of which all relies fundamentally,yet,on the development of cost-effective energy resources allowing for durable and high-rate energy supply.Current battery and fuel cell systems are challenged by a few issues characterized either by insufficient energy capacity or by operation instability and,thus,are not ideal for such highly-demanded applications as electrical vehicles and portable electronic devices.In this mini-review,we present,from materials perspectives,a few selected important breakthroughs in energy resources employed in these applications.Prospectives are then given to look towards future research activities for seeking viable materials solutions for addressing the capacity,durability,and cost shortcomings associated with current battery/fuel cell devices.
文摘100-W class power storage systems were developed, which comprised spherical Si solar cells, a maximum power point tracking charge control-ler, a lithium-ion battery, and one of two different types of direct current (DC)-alter- nating current (AC) converters. One inverter used SiC met-al-oxide-semicon-ductor field-effect transistors (MOSFETs) as switching devices while the other used Si MOSFETs. In these 100-W class inverters, the ON resistance was considered to have little influence on the efficiency. Nevertheless, the SiC-based inverter exhibited an approximately 3% higher DC-AC conversion efficiency than the Si-based inverter. Power loss analysis indicated that the higher efficiency resulted predominantly from lower switching and reverse recovery losses in the SiC MOSFETs compared with in the Si MOSFETs.
基金This work was supported by the National Natural Science Foundation of China （Nos. 21273290 and 21476271）, the Natural Science Foundation of Guangdong Province （Nos. S2013030013474 and 2014KTSCX004） and the Science and Technology Plan Project of Guangdong Province （Nos. 2014B101123002, 2014B050505001 and 2015B010118002）. We thank the Middle School Student Talent Plan.
文摘Lithium-ion batteries have emerged as the best portable energy storage device for the consumer electronics market. Recent progress in the development of lithium- ion batteries has been achieved by the use of selected anode materials, which have driven improvements in performance in terms of capadty, cyclic stability, and rate capability. In this regard, research focusing on the design and electrochemical performance of full cell lithium-ion batteries, utilizing newly developed anode materials, has been widely reported, and great strides in development have been made. Nanostructured anode materials have contributed largely to the development of full cell lithium-ion batteries. With this in mind, we summarize the impact of nanostructured anode materials in the performance of coin cell full lithium-ion batteries. This review also discusses the challenges and prospects of research into full cell lithium-ion batteries.
文摘1 Results An inverse spinel LiCoVO4 cathode material was synthesized by a citric acid-urea polymeric method, calcined at 773 K for 5 h. The synthesized LiCoVO4 sample was surface modified with various wt.% of La2O3 by a polymeric process, calcined at 873 K for 2 h. The samples were characterized by XRD, FTIR, SEM, and TEM techniques. XRD patterns exposed that single-phase crystallinity occurred when they were heated at 773 K for 5 h in air. For the La2O3 coated samples, there was no evident signal corre...
