New Leiderman–Khlystov Coefficients for Estimating Engine Full Load Characteristics and Performance

The paper presents a method of calculating the full load engine characteristics based on the Leiderman–Khlystov relation. Because the values of the coefficients of the discussed function available in literature were determined for obsolete engine designs, an attempt was made to update them. To this end, a chassis dynamometer was used where a database of results had been built for a variety of vehicles. Following the data collection, the coefficients for variety of fueling system(six groups: fuel injected gasoline and turbocharged gasoline, spark ignition LPG Ⅰ–Ⅱ and Ⅳ generation, naturally aspirated diesel and turbocharged diesel) were determined. The identification of the coefficients was carried out in Matlab-Simulink indicating the applicability of the said function for most of the engines, yet the recent popularity of turbocharged gasoline engines requires an additional analysis of the possibility of use of a different functional description. The full load engine characteristics is a basis for the vehicle performance characteristics and, further, for modeling of traffic in a variety of aspects of the vehicle operation.

ACO-Inspired Load Balancing Strategy for Cloud-Based Data Centre with Predictive Machine Learning Approach

Virtual Machines are the core of cloud computing and are utilized toget the benefits of cloud computing. Other essential features include portability,recovery after failure, and, most importantly, creating the core mechanismfor load balancing. Several study results have been reported in enhancing loadbalancingsystems employing stochastic or biogenetic optimization methods.It examines the underlying issues with load balancing and the limitationsof present load balance genetic optimization approaches. They are criticizedfor using higher-order probability distributions, more complicated solutionsearch spaces, and adding factors to improve decision-making skills. Thus, thispaper explores the possibility of summarizing load characteristics. Second,this study offers an improved prediction technique for pheromone level predictionover other typical genetic optimization methods during load balancing.It also uses web-based third-party cloud service providers to test and validatethe principles provided in this study. It also reduces VM migrations, timecomplexity, and service level agreements compared to other parallel standardapproaches.

爆破型和聚能型装药水下爆炸载荷特性

Blasting and shaped charges are the main forms of underwater weapons,and their near-field underwater explosions(UNDEX)can severely damage structures.Therefore,it is of great importance to study underwater explosive load characteristics of different forms of charges.The full physical process of a typical underwater explosion of a sphere/column blasting charge and a shaped charge was simulated using the Eulerian method.The loading characteristics of the underwater blast shock wave and bubble,as well as the projectile,were studied.The results show that the shock wave loads of spherical,cylindrical,and polygonal charges propagate outward in spherical,ellipsoidal–spherical and ellipsoidal–spherical wavefronts,respectively.When the shock wave reaches 16 times the distance-to-diameter ratio,its surface is approximately spherical.In addition,in the shaped charge underwater explosion,the shaped charge liner cover absorbs 30°–90°of the shock wave energy and some of the bubble energy to form a high-speed shaped penetrator.Spherical,ellipsoidal,and ellipsoidal bubbles are generated by underwater explosions of spherical,cylindrical,and shaped charges,respectively.The obtained results provide a reference for evaluating the power of underwater weapons.

Use of fuzzy techniques for analysis of dynamic loads in power systems

Presents the use of fuzzy techniques for analysis of dynamic load characteristics of power systems to identify the voltage stability (collapse) of a weak bus and concludes from the consistent results obtained that this is a useful tool for analysis of load charactersitics of sophiscated power systems and their components.

Dynamic Characteristics and Simplified Numerical Methods of An All-Vertical-Piled Wharf in Offshore Deep Water

There has been a growing trend in the development of offshore deep-water ports in China. For such deep sea projects, all-vertical-piled wharves are suitable structures and generally located in open waters, greatly affected by wave action. Currently, no systematic studies or simplified numerical methods are available for deriving the dynamic characteristics and dynamic responses of all-vertical-piled wharves under wave cyclic loads. In this article, we compare the dynamic characteristics of an all-vertical-piled wharf with those of a traditional inshore high-piled wharf through numerical analysis; our research reveals that the vibration period of an all-vertical-piled wharf under cyclic loading is longer than that of an inshore high-piled wharf and is much closer to the period of the loading wave. Therefore, dynamic calculation and analysis should be conducted when designing and calculating the characteristics of an all-vertical-piled wharf. We establish a dynamic finite element model to examine the dynamic response of an all-vertical-piled wharf under wave cyclic loads and compare the results with those under wave equivalent static load; the comparison indicates that dynamic amplification of the structure is evident when the wave dynamic load effect is taken into account. Furthermore, a simplified dynamic numerical method for calculating the dynamic response of an all-vertical-piled wharf is established based on the P-Y curve. Compared with finite element analysis, the simplified method is more convenient to use and applicable to large structural deformation while considering the soil non-linearity. We confirmed that the simplified method has acceptable accuracy and can be used in engineering applications.

The use of point load test for Dubai weak calcareous sandstones

Intact rock is typically described according to its uniaxial compressive strength （UCS）. The UCS is needed in the design of geotechnical engineering problems including stability of rock slopes and design of shallow and deep foundations resting on and/or in rocks. Accordingly, a correct measure-ment/evaluation of the UCS is essential to a safe and economic design. Typically, the UCS is measured using the unconfined compression tests performed on cylindrical intact specimens with a minimum length to width ratio of 2. In several cases, especially for weak and very weak rocks, it is not possible to extract intact specimens with the needed minimum dimensions. Thus, alternative tests （e.g. point load test, Schmidt hammer） are used to measure rock strength. The UCS is computed based on the results of these tests through empirical correlations. The literature includes a plethora of these correlations that vary widely in estimating rock strength. Thus, it is paramount to validate these correlations to check their suitability for estimating rock strength for a specific location and geology. A review of the available correlations used to estimate the UCS from the point load test results is performed and summarized herein. Results of UCS, point load strength index and Young＇s modulus are gathered for calcareous sandstone specimens extracted from the Dubai area. A correlation for estimating the UCS from the point load strength index is proposed. Furthermore, the Young＇s modulus is correlated to the UCS.

Water-Assisted Injection Molding System Based on Water Hydraulic Proportional Control Technique

Water-assisted injection molding（WAIM）, an innovative process to mold plastic parts with hollow sections, is characterized with intermittent, periodic process and large pressure and flow rate variation. Energy savings and injection pressure control can not be .attained based on conventional valve control system. Moreover, the injection water can not be supplied directly by water hydraulic proportional control system. Poor efficiency and control performance are presented by current trial systems, which pressurize injection water by compressed air. In this paper, a novel water hydraulic system is developed applying an accumulator for energy saving. And a new differential pressure control method is proposed by using pressure cylinder and water hydraulic proportional pressure relief valve for back pressure control. Aiming at design of linear controller for injection water pressure regulation, a linear load model is approximately built through computational fluid dynamics（CFD） simulation on two-phase flow cavity filling process with variable temperature and viscosity, and a linear model of pressure control system is built with the load model and linearization of water hydraulic components. According to the simulation, model based feedback is brought forward to compensate the pressure decrease during accumulator discharge and eliminate the derivative element of the system. Meanwhile, the steady-state error can be reduced and the capacity of resisting disturbance can be enhanced, by closed-loop control of load pressure with integral compensation. Through the developed experimental system in the State Key Lab of Fluid Power Transmission and Control, Zhejiang University, China, the static characteristic of the water hydraulic proportional relief valve was tested and output pressure control of the system in Acrylonitrile Butadiene Styrene（ABS） parts molding experiments was also studied. The experiment results show that the dead band and hysteresis of the water hydraulic proportional pressure relief valve are large, but the control precision and linearity can be improved with feed-forward compensation. With the experimental results of injection water pressure control, the applicability of this WAIM system and the effect of its linear controller are verified. The novel proposed process of WAIM pressure control and study on characteristics of control system contribute to the application of water hydraulic proportional control and WAIM technology.

Experimental investigation on dynamic response and damage models of circular RC columns subjected to underwater explosions

Reinforced concrete(RC) columns are widely used as supporting structures for high-piled wharfs.The study of damage model of a RC column due to underwater explosion is a critical issue to assess the wharfs antiknock security.In this study,the dynamic response and damage model of circular RC columns subjected to underwater explosions were investigated by means of scaled-down experiment models.Experiments were carried out in a 10.0 m diameter tank with the water depth of 2.25 m,under different explosive quantities(0.025 kg-1.6 kg),stand-off distances(0.0 m-7.0 m),and detonation depths(0.25 m-2.0 m).The shock wave load and dynamic response of experiment models were measured by configuring sensors of pressure,acceleration,strain,and displacement.Then,the load distribution characteristics,time history of test data,and damage models related to present conditions were obtained and discussed.Three damage models,including bending failure,bending-shear failure and punching failure,were identified.In addition,the experie nce model of shock wave loads on the surface of a RC column was proposed for engineering application.

Modeling and Simulation of Diaphragm Spring Clutch

A model was developed to simulate a vehicle diaphragm spring clutch with the evaluation indicators of jerk degree and friction work.First,the pressing load characteristic of the driven plate of the diaphragm spring clutch was analyzed.Then,the clutch dynamic characteristic under each state was studied according to the basic principles of tribology.Finally,the mathematical model of the clutch was developed.Based on the model,the performance of a vehicle was simulated.The simulation results show that the model can predict the dynamic characteristic of the clutch correctly and evaluate the performance of the clutch engagement effectively.The model can be used for theoretical research of automatic clutch control and can be easily applied to simulate vehicle longitudinal dynamics.

Structural Analysis and Improved Design of the Gearbox Casing of a Certain Type of Tracked Vehicle

Loads on a gearbox casing of a certain type of tracked vehicle were calculated according to the engine＇s full load characteristic curve and the worst load condition where the gearbox operated while the tracked vehicle was running, and then stiffness and strength of the casing were analyzed by means of Patran/Nastran software. After a- nalysis, it was found that the casing satisfied the Mises ＇ yield condition; however, the stress distribution was hetero- geneous, and stresses near the bearing saddle bores of the casing were higher while those in other regions were much less than the allowable stress. For this reason, thicknesses of the casing wall on bearing assembling holes needed in- creasing, while those in other places can decrease. After much structural improving and re-analysis, the optimal casing design was found, and its weight decreased by 5% ; the casing still satisfied the Mises yield criterion and the stress distribution was more homogeneous.

Indoor environment of nearly zero energy residential buildings with conventional air conditioning in hot-summer and cold-winter zone

According to the few researches on Nearly zero energy residential buildings(NZERB)in hot-summer and cold-winter zone,although it could reduce the cooling load of buildings due to its high thermal insulation and air tightness,it still needed for certain cooling in summer.This paper studied indoor environment of NZERB un-der three kinds of air-conditioners(split-type air-conditioner,multi-line air-conditioner and ceiling radiant air-conditioner).Firstly,a simulation model of NZERB was established based on Nanjing,a typical city in hot-summer and cold-winter zone.Secondly,variation of indoor air temperature and building load characteristics with outdoor air temperature were studied.Thirdly,indoor environment and energy consumption under three selected con-ventional air-conditioners in summer were simulated.Finally,the discussion was given,and an air-conditioner combining with convective and radiant cooling were proposed.The results indicated that the air-conditioner needed to be turned on in NZERB in hot-summer and cold-winter zone due to the room air temperature in off-air condition ranged from 32℃to 36℃,which was higher than designed indoor environment temperature in sum-mer,but the indoor environment of NZERB under three selected conventional air-conditioners could not meet the requirements of energy saving and comfort at the same time,and a proposed convective-radiant air-conditioner could be fast,stable,and energy saving.The findings can provide a reference for conducting active technology in NZERB.