Security Analysis of Application Layer Protocols on Wireless Local Area Networks

This paper aims at analyzing the security issues that lie in the application layer (AL) protocols when users connect to the Internet via a wireless local area network (WLAN) through an access point. When adversaries launch deauthentication flood attacks cutting users' connection, the connection managers will automatically research the last access point's extended service set identifier (ESSID) and then re-establish connection. However, such re-connection can lead the users to a fake access point with the same ESSID set by attackers. As the attackers hide behind users' access points, they can pass AL's authentication and security schemes, e.g. secure socket layer (SSL). We have proved that they can even spy on users' account details, passwords, data and privacy.

Application of Wireless Local Area Network Technology in Mobile Robot for Finned Tube Inspection

This paper introduces a novel robot for outer surface inspection of boiler tubes. The paper describes the hardware system, wireless communication strategy, communication procedure and system software of the robot. The WLAN technology is used in the robot. It solves the problem of shielding generated by iron boiler and 11Mbps bandwidth made it possible for video and control stream real-time transmit within the same channel. Though TCP/IP protocol is robust, serial server is a transparent channel but cannot detect error and retransmit the data. In order to improve the reliability of serial communication, a new communication protocol is proposed. Key words boiler tubes - mobile robotics - wireless local area network Project Supported by the National High-Tech Program (Grant No. 2002AA420080)

Research on the Teaching Reform of ＂Wireless Local Area Network＂ in the Background of＂Wireless Business Circle＂

This paper proposes the teaching reform of the ＂Wireless Local Area Network＂ in the background of ＂Wireless Business Circle＂ . At present, WLAN technology is becoming more and more mature, the application is then becoming more and more extensive, the campus network will grow rapidly on wireless LAN applications especially the research and higher education institutions on the wireless LAN demand is increasing with wireless LAN will have a very broad market development space. GIS business circle analysis model is to determine business enterprise location or expand their existing business outlets of information necessary to say on the map by G1S visual function of the model. This paper makes the combination of the mentioned items that will then and later influence the performance of the model.

Domain adaptive methods for device diversity in indoor localization

To solve the problem of variations in radio frequency characteristics among different devices,transfer learning is applied to transform device diversity to domain adaptation in the indoor localization algorithm.A robust indoor localization algorithm based on the aligned fingerprints and ensemble learning called correlation alignment for localization(CALoc)is proposed with low computational complexity.The second-order statistical properties of fingerprints in the offline and online phase are needed to be aligned.The real-time online calibration method mitigates the impact of device heterogeneity largely.Without any time-consuming deep learning retraining process,CALoc online only needs 0.11 s.The effectiveness and efficiency of CALoc are verified by realistic experiments.The results show that compared to the traditional algorithms,a significant performance gain is achieved and that it achieves better positioning accuracy with a 19%improvement.

A Semi-Supervised WLAN Indoor Localization Method Based on l1-Graph Algorithm

For indoor location estimation based on received signal strength( RSS) in wireless local area networks( WLAN),in order to reduce the influence of noise on the positioning accuracy,a large number of RSS should be collected in offline phase. Therefore,collecting training data with positioning information is time consuming which becomes the bottleneck of WLAN indoor localization. In this paper,the traditional semisupervised learning method based on k-NN and ε-NN graph for reducing collection workload of offline phase are analyzed,and the result shows that the k-NN or ε-NN graph are sensitive to data noise,which limit the performance of semi-supervised learning WLAN indoor localization system. Aiming at the above problem,it proposes a l1-graph-algorithm-based semi-supervised learning( LG-SSL) indoor localization method in which the graph is built by l1-norm algorithm. In our system,it firstly labels the unlabeled data using LG-SSL and labeled data to build the Radio Map in offline training phase,and then uses LG-SSL to estimate user's location in online phase. Extensive experimental results show that,benefit from the robustness to noise and sparsity ofl1-graph,LG-SSL exhibits superior performance by effectively reducing the collection workload in offline phase and improving localization accuracy in online phase.

Radio map updated method based on subscriber locations in indoor WLAN localization

With the rapid development of wireless local area network （WLAN） technology, an important target of indoor positioning systems is to improve the positioning accuracy while reducing the online calibration effort to overcome signal time-varying. A novel fingerprint positioning algorithm, known as the adaptive radio map with updated method based on hidden Markov model （HMM）, is proposed. It is shown that by using a collection of user traces that can be cheaply obtained, the proposed algorithm can take advantage of these data to update the labeled calibration data to further improve the position estimation accuracy. This algorithm is a combination of machine learning, information gain theory and fingerprinting. By collecting data and testing the algorithm in a realistic indoor WLAN environment, the experiment results indicate that, compared with the widely used K nearest neighbor algorithm, the proposed algorithm can improve the positioning accuracy while greatly reduce the calibration effort.

Energy efficiency aware dynamic rate and power adaptation in carrier sensing based WLANs under Rayleigh fading and shadowing

We consider the problem of energy efficiency aware dynamic adaptation of data transmission rate and transmission power of the users in carrier sensing based Wireless Local Area Networks(WLANs)in the presence of path loss,Rayleigh fading and log-normal shadowing.For a data packet transmission,we formulate an optimization problem,solve the problem,and propose a rate and transmission power adaptation scheme with a restriction methodology of data packet transmission for achieving the optimal energy efficiency.In the restriction methodology of data packet transmission,a user does not transmit a data packet if the instantaneous channel gain of the user is lower than a threshold.To evaluate the performance of the proposed scheme,we develop analytical models for computing the throughput and energy efficiency of WLANs under the proposed scheme considering a saturation traffic condition.We then validate the analytical models via simulation.We find that the proposed scheme provides better throughput and energy efficiency with acceptable throughput fairness if the restriction methodology of data packet transmission is included.By means of the analytical models and simulations,we demonstrate that the proposed scheme provides significantly higher throughput,energy efficiency and fairness index than a traditional non-adaptive scheme and an existing most relevant adaptive scheme.Throughput and energy efficiency gains obtained by the proposed scheme with respect to the existing adapting scheme are about 75%and 103%,respectively,for a fairness index of 0.8.We also study the effect of various system parameters on throughput and energy efficiency and provide various engineering insights.

Optical local area network emulations over Ethernet passive optical networks:A survey

As a promising solution to efficiently achieving fiber to the home （FTTH）, Ethernet passive optical network （EPON） is currently improved to provide intercommunication among customers, together with normal traffic delivery, via optical local area network emulation. It is a new research direction and expected to enhance the normal EPON performances. The purpose of this article is to review the state-of -the-art solutions to emulating optical local area networks （OLANs） over EPON. We discuss the major problems involved, e.g., network architecture, control mechanisms, and other potential enhancements. We also outline areas for future researches.

Security analysis of newly ameliorated WAPI protocol

Based on thorough researches on the Chinese wireless local area network （WLAN） security standard, i. e., WLAN authentication and privacy infrastructure （WAPI）, the security of the authentication access process is analyzed with the CK （Canetti-Krawczyk） model and the BAN （Burrows-Abadi- Needham） logic. Results show that it can achieve the alleged authentication and key negotiation goals. Besides those alleged, further analyses indicate that the authentication access process can satisfy other security requirements, such as mutual identity authentication, mutual key control, key confirmation, message integrity check, etc. If the used elliptic curve encryption algorithm and the hash algorithm are secure enough, the protocol can efficiently realize mutual authentication between STAs （station） and APs （access point）. Therefore, WAPI can be applied to replace the security mechanism used in the original WLAN international standard to enhance its security.

MODIFIED ULTRA WIDEBAND CIRCULAR PRINTED MONOPOLE ANTENNA

A simple and compact microstrip-fed ultra wideband （UWB） printed monopole antenna is presented. The antenna is composed of a circular radiator and a finitely grounded plane. The antenna occupies about 16.62 GHz absolute bandwidth and 142.7% relative bandwidth covering from 3.38 GHz to 20 GHz with voltage standing wave ratio （VSWR） below two. A quasi-omnidirectional and quasi-symmetrical radiation pattern in H plane is obtained in the whole bandwidth. The high performance of the antenna is validated with measured and simulated results given. The antenna can be applied for the system design of UWB wireless communication.

Design and development of WLAN access point based on Bluetooth and uClinux

This paper describes the design and development of a wireless LAN (WLAN) access point based on Bluetooth and uClinux. To make the best use of high-speed serial communication capability, several methods such as modifying baud-rate of serial port driver, utilizing buffer area and adding flow-control were adopted. After analysis of scheduling and interruption handling, modifying the timer's parameters was put forward as a method to control the timer interrupt. In this way, data throughput and system stability were enhanced. Meanwhile, migration of the Bluetooth protocol stack was detailed and some successful applications of LAN access point were presented.

A KNN-based two-step fuzzy clustering weighted algorithm for WLAN indoor positioning

Although k-nearest neighbors （KNN） is a popular fingerprint match algorithm for its simplicity and accuracy, because it is sensitive to the circumstances, a fuzzy c-means （FCM） clustering algorithm is applied to improve it. Thus, a KNN-based two-step FCM weighted （KTFW） algorithm for indoor positioning in wireless local area networks （WLAN） is presented in this paper. In KTFW algorithm, k reference points （RPs） chosen by KNN are clustered through FCM based on received signal strength （RSS） and location coordinates. The right clusters are chosen according to rules, so three sets of RPs are formed including the set of k RPs chosen by KNN and are given different weights. RPs supposed to have better contribution to positioning accuracy are given larger weights to improve the positioning accuracy. Simulation results indicate that KTFW generally outperforms KNN and its complexity is greatly reduced through providing initial clustering centers for FCM.

A shock wave overpressure test system based on WLAN

Due to short transmission distance and low transmission speed when testing the shock wave overpressure with storage test method based on ZigBee technology, a new test method based on wireless local area network （WLAN） technology is proposed, which can monitor remote test nodes. Moreover, the wireless network is designed based on 802. 11b/g protocol, which is helpful for reading the data of the test nodes quickly. Therefore, the accessibility of distributed test system can be improved greatly. The field test results show that the test system performance is good and the transmission speed is high.

SEM-Based Method for Performance Evaluation of Wired LANs

For wired local area networks(LANs),their effectiveness and invulnerability are very critical.It is extraordinarily significant to evaluate the network performance effectively in the design of a reasonable network topology and the performance improvement of the networks.However,there are many factors affecting the performance of the networks,and the relation among them is also complicated.How to evaluate the performance of the wired LANs more accurately has been a heavy challenge in the network research.In order to solve the problem,this paper presents a performance evaluation method that evaluates the effectiveness and invulnerability of the wired LANs.Compared to traditional statistical methods,it has the distinct advantage of being able to handle several dependent variables simultaneously and tolerates the measurement errors among these independent variables and dependent variables.Finally,the rationality and validity of this method are verified by the extensive experimental simulation.

A random adaptive method to adjust MAC parameters in IEEE802.11e WLAN

The IEEE 802.11e standard is proposed to provide QoS support in WLAN by providing prioritized differentiation of traffic. Since all the stations in the same priority access category (AC) have the same set of parameters, when the number of stations increases, the probability of different stations in the same AC choosing the same values will increase, which will result in collisions. Random adaptive MAC (medium access control) parameters scheme (RAMPS) is proposed, which uses random adaptive MAC differentiation parameters instead of the static ones used in the 802.11e standard. The performance of RAMPS is compared with that of enhanced distributed coordination access (EDCA) using NS2. The results show that RAMPS can reduce collision rate of the AC and improve the throughput by using adaptive random contention window size and inter-frame spacing values. RAMPS ensures that at any given time, several flows of the same priority have different MAC parameter values. By using the random offset for the inter-frame spacing value and the backoff time, RAMPS can provide intra-AC differentiation. The simulation results show that RAMPS outperforms EDCA in terms of both throughput and end-to-end delay irrespective of the traffic load.

Improved MIMO-OFDM scheme for the next generation WLAN

The research and application of wireless local area networks （WLAN） technology are in a stage of rapid development. It has been one of research focuses of the wireless communications field. Through the use of enhanced single-user （SU）/multi-user （MU） multiple input multiple output （MIMO）-orthogonal frequency division multiplexing （OFDM） technology, the next generation WLAN IEEE 802.1 lac dramatically increases the throughput. An improved MIMO-OFDM scheme based on modulation diversity is proposed for the next generation WLAN. It uses two-dimensional modulation diversity to the current IEEE 802.11ac transmission scheme. Through the space-time-frequency component inter- leaver and the rotational modulation, the proposed scheme ex- hibits high spectral efficiency and low error rate in fading channels. The simulation results show that the proposed scheme significantly outperforms the SU/MU MIMO-OFDM scheme in the current IEEE 802.11 ac standard, which is up to 5 dB.

Mathematical Analysis of Energy Efficiency in IEEE 802.11 DCF

The standardized IEEE ,802. II distributed coordination function （ DCF） provides a contention-based distributed channel access mechanism for mobile stations to share the wireless medium. However, when stations are mobile or portable units, power consumption becomes a primary issue since terminals are usually battery driven. This paper proposes an analytical model that calculates the energy efficiency of both the basic and the RTS/CTS access mechanisms of the IEEE 802. II protocol. The model is validated with simulation results using NS-2 simulation package. The effects of the network size, the average packet length, the initial contention window and maximum backoff stages on the energy efficiency of both access mechanisms are also investigated. Results show that the basic scheme has low energy efficiency at large packet length and large network size, and depends strongly on the number of stations and the backoff procedure parameters. Conversely, the RTS/CTS mechanism provides higher energy efficiency when the network size is large, and is more robust to variations in the backoff procedure parameters.

Research and Development of Indoor Positioning

Indoor positioning systems have been sufficiently researched to provide location information of persons and devices.This paper is focused on the current research and further development of indoor positioning.The standard evolution and industry development are summarized.There are various positioning systems according to the scenarios,cost and accuracy.However,there is a basic positioning system framework including information extraction,measurement and calculation.In particular,the detailed positioning technologies mainly including cellular positioning and Local Area Network(LAN) positioning are listed and compared to provide a reference for practical applications.Finally,we summarize the challenges of indoor positioning and give a3-phase evolution route.

Multiple Welding Seam Video Transmission and Monitoring of Welding Robot in Local Area Network

A method of transmission and monitoring in local area network(LAN) for the welding seam video information of binocular vision welding robot is proposed.This paper uses MPEG-4 video CODEC functions of DivX,video for Windows(VFW) video capture technology,multi-threaded network communication idea and WinSock Socket in Visual C++ 6.0.In the end,client/server(C/S) communication model based on TCP/IP protocol has been developed.Experimental results show that the method can achieve the multiple welding seam video's real-time transmission in LAN.Moreover,the Canny operator is used to realize the edge feature extraction of the seam image which is captured by the client,so that the edge of the seam extracted is continuous and clear.

Secure Authentication of WLAN Based on Elliptic Curve Cryptosystem

The security of wireless local area network （WI.AN） becomes a bottleneck for its further applications. At present, many standard organizations and manufacturers of WLAN try to solve this problem. However, owing to the serious secure leak in IEEES02.11 standards, it is impossible to utterly solve the problem by simply adding some remedies. Based on the analysis on the security mechanism of WLAN and the latest techniques of WI.AN security, a solution to WLAN security was presented. The solution makes preparation for the further combination of WLAN and Internet.