Nonlinear formulations of the meshless local Petrov-Galerkin （MLPG） method are presented for geometrically nonlinear problems. The method requires no mesh in computation and therefore avoids mesh distortion difficul...Nonlinear formulations of the meshless local Petrov-Galerkin （MLPG） method are presented for geometrically nonlinear problems. The method requires no mesh in computation and therefore avoids mesh distortion difficulties in the large deformation analysis. The essential boundary conditions in the present formulation axe imposed by a penalty method. An incremental and iterative solution procedure is used to solve geometrically nonlinear problems. Several examples are presented to demonstrate the effectiveness of the method in geometrically nonlinear problems analysis. Numerical results show that the MLPG method is an effective one and that the values of the unknown variable are quite accurate.展开更多
The objectives of this study are to employ the meshless local Petrov-Galerkin method （MLPGM） to solve three-dimensional shell problems. The computational accuracy of MLPGM for shell problems is affected by many fact...The objectives of this study are to employ the meshless local Petrov-Galerkin method （MLPGM） to solve three-dimensional shell problems. The computational accuracy of MLPGM for shell problems is affected by many factors, including the dimension of compact support domain, the dimension of quadrture domain, the number of integral cells and the number of Gauss points. These factors＇ sensitivity analysis is to adopt the Taguchi experimental design technology and point out the dimension of the quadrature domain with the largest influence on the computational accuracy of the present MLPGM for shells and give out the optimum combination of these factors. A few examples are given to verify the reliability and good convergence of MLPGM for shell problems compared to the theoretical or the finite element results.展开更多
The meshless local Petrov_Galerkin (MLPG) method for solving the bending problem of the thin plate were presented and discussed. The method used the moving least_squares approximation to interpolate the solution varia...The meshless local Petrov_Galerkin (MLPG) method for solving the bending problem of the thin plate were presented and discussed. The method used the moving least_squares approximation to interpolate the solution variables, and employed a local symmetric weak form. The present method was a truly meshless one as it did not need a finite element or boundary element mesh, either for purpose of interpolation of the solution, or for the integration of the energy. All integrals could be easily evaluated over regularly shaped domains (in general, spheres in three_dimensional problems) and their boundaries. The essential boundary conditions were enforced by the penalty method. Several numerical examples were presented to illustrate the implementation and performance of the present method. The numerical examples presented show that high accuracy can be achieved for arbitrary grid geometries for clamped and simply_supported edge conditions. No post processing procedure is required to computer the strain and stress, since the original solution from the present method, using the moving least squares approximation, is already smooth enough.展开更多
Based on the complex variable moving least-square（CVMLS） approximation and a local symmetric weak form,the complex variable meshless local Petrov-Galerkin（CVMLPG） method of solving two-dimensional potential proble...Based on the complex variable moving least-square（CVMLS） approximation and a local symmetric weak form,the complex variable meshless local Petrov-Galerkin（CVMLPG） method of solving two-dimensional potential problems is presented in this paper.In the present formulation,the trial function of a two-dimensional problem is formed with a one-dimensional basis function.The number of unknown coefficients in the trial function of the CVMLS approximation is less than that in the trial function of the moving least-square（MLS） approximation.The essential boundary conditions are imposed by the penalty method.The main advantage of this approach over the conventional meshless local Petrov-Galerkin（MLPG） method is its computational efficiency.Several numerical examples are presented to illustrate the implementation and performance of the present CVMLPG method.展开更多
Special transmission 3D model simulation must be based on surface discretization and reconstruction, but special transmission usually has complicated tooth shape and movement, so present software can＇t provide techni...Special transmission 3D model simulation must be based on surface discretization and reconstruction, but special transmission usually has complicated tooth shape and movement, so present software can＇t provide technical support for special transmission 3D model simulation. Currently, theoretical calculation and experimental method are difficult to exactly solve special transmission contact analysis problem. How to reduce calculation and computer memories consume and meet calculation precision is key to resolve special transmission contact analysis problem. According to 3D model simulation and surface reconstruction of quasi ellipsoid gear is difficulty, this paper employes meshless local Petrov-Galerkin （MLPG） method. In order to reduce calculation and computer memories consume, we disperse tooth mesh into finite points--sparseness points cloud or grid mesh, and then we do interpolation reconstruction in some necessary place of the 3D surface model during analysis. Moving least square method （MLSM） is employed for tooth mesh interpolation reconstruction, there are some advantages to do interpolation by means of MLSM, such as high precision, good flexibility and no require of tooth mesh discretization into units. We input the quasi ellipsoid gear reconstruction model into simulation software, we complete tooth meshing simulation. Simulation transmission ratio during meshing period was obtained, compared with theoretical transmission ratio, the result inosculate preferably. The method using curve reconstruction realizes surface reconstruction, reduce simulation calculation enormously, so special gears simulation can be realized by minitype computer. The method provides a novel solution for special transmission 3D model simulation analysis and contact analysis.展开更多
A meshiess local discontinuous Petrov-Galerkin （MLDPG） method based on the local symmetric weak form （LSWF） is presented with the application to blasting problems. The derivation is similar to that of mesh-based R...A meshiess local discontinuous Petrov-Galerkin （MLDPG） method based on the local symmetric weak form （LSWF） is presented with the application to blasting problems. The derivation is similar to that of mesh-based Runge-Kutta Discontinuous Galerkin （RKDG） method. The solutions are reproduced in a set of overlapped spherical sub-domains, and the test functions are employed from a partition of unity of the local basis functions. There is no need of any traditional nonoverlapping mesh either for local approximation purpose or for Galerkin integration purpose in the presented method. The resulting MLDPG method is a meshless, stable, high-order accurate and highly parallelizable scheme which inherits both the advantages of RKDG and meshless method （MM）, and it can handle the problems with extremely complicated physics and geometries easily. Three numerical examples of the one-dimensional Sod shock-tube problem, the blast-wave problem and the Woodward-Colella interacting shock wave problem are given. All the numerical results are in good agreement with the closed solutions. The higher-order MLDPG schemes can reproduce more accurate solution than the lower-order schemes.展开更多
This study presents a new tool for solving stochastic boundary-value problems. This tool is created by modify the previous spectral stochastic meshless local Petrov-Galerkin method using the MLPG5 scheme. This modifie...This study presents a new tool for solving stochastic boundary-value problems. This tool is created by modify the previous spectral stochastic meshless local Petrov-Galerkin method using the MLPG5 scheme. This modified spectral stochastic meshless local Petrov-Galerkin method is selectively applied to predict the structural failure probability with the uncertainty in the spatial variability of mechanical properties. Except for the MLPG5 scheme, deriving the proposed spectral stochastic meshless local Petrov-Galerkin formulation adopts generalized polynomial chaos expansions of random mechanical properties. Predicting the structural failure probability is based on the first-order reliability method. Further comparing the spectral stochastic finite element-based and meshless local Petrov-Galerkin-based predicted structural failure probabilities indicates that the proposed spectral stochastic meshless local Petrov-Galerkin method predicts the more accurate structural failure probability than the spectral stochastic finite element method does. In addition, generating spectral stochastic meshless local Petrov-Galerkin results are considerably time-saving than generating Monte-Carlo simulation results does. In conclusion, the spectral stochastic meshless local Petrov-Galerkin method serves as a time-saving tool for solving stochastic boundary-value problems sufficiently accurately.展开更多
Using the two-scale decomposition technique, the h-adaptive meshless local Petrov- Galerkin method for solving Mindlin plate and shell problems is presented. The scaling functions of B spline wavelet are employed as t...Using the two-scale decomposition technique, the h-adaptive meshless local Petrov- Galerkin method for solving Mindlin plate and shell problems is presented. The scaling functions of B spline wavelet are employed as the basis of the moving least square method to construct the meshless interpolation function. Multi-resolution analysis is used to decompose the field variables into high and low scales and the high scale component can commonly represent the gradient of the solution according to inherent characteristics of wavelets. The high scale component in the present method can directly detect high gradient regions of the field variables. The developed adaptive refinement scheme has been applied to simulate actual examples, and the effectiveness of the present adaptive refinement scheme has been verified.展开更多
The goal of this study is to solve the neutron diffusion equation by using a meshless method and evaluate its performance compared to traditional methods. This paper proposes a novel method based on coupling the meshl...The goal of this study is to solve the neutron diffusion equation by using a meshless method and evaluate its performance compared to traditional methods. This paper proposes a novel method based on coupling the meshless local Petrov–Galerkin approach and the moving least squares approximation. This computational procedure consists of two main steps. The first involved applying the moving least squares approximation to construct the shape function based on the problem domain. Then, the obtained shape function was used in the meshless local Petrov–Galerkin method to solve the neutron diffusion equation.Because the meshless method is based on eliminating the mesh-based topologies, the problem domain was represented by a set of arbitrarily distributed nodes. There is no need to use meshes or elements for field variable interpolation. The process of node generation is simply and fully automated, which can save time. As this method is a local weak form, it does not require any background integration cells and all integrations are performed locally over small quadrature domains. To evaluate the proposed method,several problems were considered. The results were compared with those obtained from the analytical solution and a Galerkin finite element method. In addition, the proposed method was used to solve neutronic calculations in thesmall modular reactor. The results were compared with those of the citation code and reference values. The accuracy and precision of the proposed method were acceptable. Additionally, adding the number of nodes and selecting an appropriate weight function improved the performance of the meshless local Petrov–Galerkin method. Therefore, the proposed method represents an accurate and alternative method for calculating core neutronic parameters.展开更多
研究了无网格局部Petrov-Galerkin方法MLPG(Meshless Local Petrov-Galerkin Method)的并行算法与并行实现过程。将MLPG方法推广到弹性动力学问题,研究了MLPG方法中节点搜索、积分点搜索、数值积分及方程组求解等过程的并行算法,并给出...研究了无网格局部Petrov-Galerkin方法MLPG(Meshless Local Petrov-Galerkin Method)的并行算法与并行实现过程。将MLPG方法推广到弹性动力学问题,研究了MLPG方法中节点搜索、积分点搜索、数值积分及方程组求解等过程的并行算法,并给出了MLPG方法并行计算的具体实现过程。两个数值算例验证了MLPG并行算法的有效性;计算结果表明,MLPG方法的并行计算具有很好的并行性能和可扩展性。展开更多
基金Project supported by the National 973 Program (No.2004CB719402), the National Natural Science Foundation of China (No. 10372030)the Open Research Projects supported by the Project Fund of the Hubei Province Key Lab of Mechanical Transmission & Manufacturing Engineering Wuhan University of Science & Technology (No.2003A16).
文摘Nonlinear formulations of the meshless local Petrov-Galerkin （MLPG） method are presented for geometrically nonlinear problems. The method requires no mesh in computation and therefore avoids mesh distortion difficulties in the large deformation analysis. The essential boundary conditions in the present formulation axe imposed by a penalty method. An incremental and iterative solution procedure is used to solve geometrically nonlinear problems. Several examples are presented to demonstrate the effectiveness of the method in geometrically nonlinear problems analysis. Numerical results show that the MLPG method is an effective one and that the values of the unknown variable are quite accurate.
基金the Scientific Foundation of National Outstanding Youth of China(No.50225520)the Science Foundation of Shandong University of Technology of China(No.2006KJM33).
文摘The objectives of this study are to employ the meshless local Petrov-Galerkin method （MLPGM） to solve three-dimensional shell problems. The computational accuracy of MLPGM for shell problems is affected by many factors, including the dimension of compact support domain, the dimension of quadrture domain, the number of integral cells and the number of Gauss points. These factors＇ sensitivity analysis is to adopt the Taguchi experimental design technology and point out the dimension of the quadrature domain with the largest influence on the computational accuracy of the present MLPGM for shells and give out the optimum combination of these factors. A few examples are given to verify the reliability and good convergence of MLPGM for shell problems compared to the theoretical or the finite element results.
文摘The meshless local Petrov_Galerkin (MLPG) method for solving the bending problem of the thin plate were presented and discussed. The method used the moving least_squares approximation to interpolate the solution variables, and employed a local symmetric weak form. The present method was a truly meshless one as it did not need a finite element or boundary element mesh, either for purpose of interpolation of the solution, or for the integration of the energy. All integrals could be easily evaluated over regularly shaped domains (in general, spheres in three_dimensional problems) and their boundaries. The essential boundary conditions were enforced by the penalty method. Several numerical examples were presented to illustrate the implementation and performance of the present method. The numerical examples presented show that high accuracy can be achieved for arbitrary grid geometries for clamped and simply_supported edge conditions. No post processing procedure is required to computer the strain and stress, since the original solution from the present method, using the moving least squares approximation, is already smooth enough.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 11102125)
文摘Based on the complex variable moving least-square（CVMLS） approximation and a local symmetric weak form,the complex variable meshless local Petrov-Galerkin（CVMLPG） method of solving two-dimensional potential problems is presented in this paper.In the present formulation,the trial function of a two-dimensional problem is formed with a one-dimensional basis function.The number of unknown coefficients in the trial function of the CVMLS approximation is less than that in the trial function of the moving least-square（MLS） approximation.The essential boundary conditions are imposed by the penalty method.The main advantage of this approach over the conventional meshless local Petrov-Galerkin（MLPG） method is its computational efficiency.Several numerical examples are presented to illustrate the implementation and performance of the present CVMLPG method.
基金supported by National Natural Science Foundation of China (Grant No. 50905049)Heilongjiang Provincial International Cooperation Project of China (WB06A06)+1 种基金Heilongjiang Provincial Programs for Science and Technology Development of China (GC09A524)Heilongjiang Provincial Postdoctoral Science Foundation of China (LBH-Z09189)
文摘Special transmission 3D model simulation must be based on surface discretization and reconstruction, but special transmission usually has complicated tooth shape and movement, so present software can＇t provide technical support for special transmission 3D model simulation. Currently, theoretical calculation and experimental method are difficult to exactly solve special transmission contact analysis problem. How to reduce calculation and computer memories consume and meet calculation precision is key to resolve special transmission contact analysis problem. According to 3D model simulation and surface reconstruction of quasi ellipsoid gear is difficulty, this paper employes meshless local Petrov-Galerkin （MLPG） method. In order to reduce calculation and computer memories consume, we disperse tooth mesh into finite points--sparseness points cloud or grid mesh, and then we do interpolation reconstruction in some necessary place of the 3D surface model during analysis. Moving least square method （MLSM） is employed for tooth mesh interpolation reconstruction, there are some advantages to do interpolation by means of MLSM, such as high precision, good flexibility and no require of tooth mesh discretization into units. We input the quasi ellipsoid gear reconstruction model into simulation software, we complete tooth meshing simulation. Simulation transmission ratio during meshing period was obtained, compared with theoretical transmission ratio, the result inosculate preferably. The method using curve reconstruction realizes surface reconstruction, reduce simulation calculation enormously, so special gears simulation can be realized by minitype computer. The method provides a novel solution for special transmission 3D model simulation analysis and contact analysis.
基金Supported by New Century Excellent Talents in University in China(NCET),National"973" Program(No.61338)Innovative Research Project of Xi'an Hi-Tech Institute(EPXY0806)
文摘A meshiess local discontinuous Petrov-Galerkin （MLDPG） method based on the local symmetric weak form （LSWF） is presented with the application to blasting problems. The derivation is similar to that of mesh-based Runge-Kutta Discontinuous Galerkin （RKDG） method. The solutions are reproduced in a set of overlapped spherical sub-domains, and the test functions are employed from a partition of unity of the local basis functions. There is no need of any traditional nonoverlapping mesh either for local approximation purpose or for Galerkin integration purpose in the presented method. The resulting MLDPG method is a meshless, stable, high-order accurate and highly parallelizable scheme which inherits both the advantages of RKDG and meshless method （MM）, and it can handle the problems with extremely complicated physics and geometries easily. Three numerical examples of the one-dimensional Sod shock-tube problem, the blast-wave problem and the Woodward-Colella interacting shock wave problem are given. All the numerical results are in good agreement with the closed solutions. The higher-order MLDPG schemes can reproduce more accurate solution than the lower-order schemes.
文摘This study presents a new tool for solving stochastic boundary-value problems. This tool is created by modify the previous spectral stochastic meshless local Petrov-Galerkin method using the MLPG5 scheme. This modified spectral stochastic meshless local Petrov-Galerkin method is selectively applied to predict the structural failure probability with the uncertainty in the spatial variability of mechanical properties. Except for the MLPG5 scheme, deriving the proposed spectral stochastic meshless local Petrov-Galerkin formulation adopts generalized polynomial chaos expansions of random mechanical properties. Predicting the structural failure probability is based on the first-order reliability method. Further comparing the spectral stochastic finite element-based and meshless local Petrov-Galerkin-based predicted structural failure probabilities indicates that the proposed spectral stochastic meshless local Petrov-Galerkin method predicts the more accurate structural failure probability than the spectral stochastic finite element method does. In addition, generating spectral stochastic meshless local Petrov-Galerkin results are considerably time-saving than generating Monte-Carlo simulation results does. In conclusion, the spectral stochastic meshless local Petrov-Galerkin method serves as a time-saving tool for solving stochastic boundary-value problems sufficiently accurately.
基金supported by the Scientific Foundation of National Outstanding Youth of China(No.50225520)Science Foundation of Shandong University of Technology of China(No.2006KJM33).
文摘Using the two-scale decomposition technique, the h-adaptive meshless local Petrov- Galerkin method for solving Mindlin plate and shell problems is presented. The scaling functions of B spline wavelet are employed as the basis of the moving least square method to construct the meshless interpolation function. Multi-resolution analysis is used to decompose the field variables into high and low scales and the high scale component can commonly represent the gradient of the solution according to inherent characteristics of wavelets. The high scale component in the present method can directly detect high gradient regions of the field variables. The developed adaptive refinement scheme has been applied to simulate actual examples, and the effectiveness of the present adaptive refinement scheme has been verified.
文摘The goal of this study is to solve the neutron diffusion equation by using a meshless method and evaluate its performance compared to traditional methods. This paper proposes a novel method based on coupling the meshless local Petrov–Galerkin approach and the moving least squares approximation. This computational procedure consists of two main steps. The first involved applying the moving least squares approximation to construct the shape function based on the problem domain. Then, the obtained shape function was used in the meshless local Petrov–Galerkin method to solve the neutron diffusion equation.Because the meshless method is based on eliminating the mesh-based topologies, the problem domain was represented by a set of arbitrarily distributed nodes. There is no need to use meshes or elements for field variable interpolation. The process of node generation is simply and fully automated, which can save time. As this method is a local weak form, it does not require any background integration cells and all integrations are performed locally over small quadrature domains. To evaluate the proposed method,several problems were considered. The results were compared with those obtained from the analytical solution and a Galerkin finite element method. In addition, the proposed method was used to solve neutronic calculations in thesmall modular reactor. The results were compared with those of the citation code and reference values. The accuracy and precision of the proposed method were acceptable. Additionally, adding the number of nodes and selecting an appropriate weight function improved the performance of the meshless local Petrov–Galerkin method. Therefore, the proposed method represents an accurate and alternative method for calculating core neutronic parameters.
文摘研究了无网格局部Petrov-Galerkin方法MLPG(Meshless Local Petrov-Galerkin Method)的并行算法与并行实现过程。将MLPG方法推广到弹性动力学问题,研究了MLPG方法中节点搜索、积分点搜索、数值积分及方程组求解等过程的并行算法,并给出了MLPG方法并行计算的具体实现过程。两个数值算例验证了MLPG并行算法的有效性;计算结果表明,MLPG方法的并行计算具有很好的并行性能和可扩展性。
