The Shimian area of Sichuan sits at the junction of the Bayan Har block.Sichuan-Yunnan rhombic block,and Yangtze block,where several faults intersect.This region features intense tectonic activity and frequent earthqu...The Shimian area of Sichuan sits at the junction of the Bayan Har block.Sichuan-Yunnan rhombic block,and Yangtze block,where several faults intersect.This region features intense tectonic activity and frequent earthquakes.In this study,we used local seismic waveform data recorded using dense arrays deployed in the Shimian area to obtain the shear wave splitting parameters at 55 seismic stations and thereby determine the crustal anisotropic characteristics of the region.We then analyzed the crustal stress pattern and tectonic setting and explored their relationship in the study area.Although some stations returned a polarization direction of NNW-SSE.a dominant polarization direction of NW-SE was obtained for the fast shear wave at most seismic stations in the study area.The polarization directions of the fast shear wave were highly consistent throughout the study-area.This orientation was in accordance with the direction of the regional principal compressive stress and parallel to the trend of the Xianshuihe and Daliangshan faults.The distribution of crustal anisotropy in this area was affected by the regional tectonic stress field and the fault structures.The mean delay time between fast and slow shear waves was 3.83 ms/km.slightly greater than the values obtained in other regions of Sichuan.This indicates that the crustal media in our study area had a high anisotropic strength and also reveals the influence of tectonic complexity resulting from the intersection of multiple faults on the strength of seismic anisotropy.展开更多
By linear regression and orthogonal regression methods, comparisons are made between different magnitudes (local magnitude ML, surface wave magnitudes Ms and MsT, long-period body wave magnitude mB and short-period b...By linear regression and orthogonal regression methods, comparisons are made between different magnitudes (local magnitude ML, surface wave magnitudes Ms and MsT, long-period body wave magnitude mB and short-period body wave magnitude mb) determined by Institute of Geophysics, China Earthquake Administration, on the basis of observation data collected by China Seismograph Network between 1983 and 2004. Empirical relations between different magnitudes have been obtained. The result shows that: ① As different magnitude scales reflect radiated energy by seismic waves within different periods, earthquake magnitudes can be described more objectively by using different scales for earthquakes of different magnitudes. When the epicentral distance is less than 1000 km, local magnitude ME can be a preferable scale; In case M〈4.5, there is little difference between the magnitude scales; In case 4.5〈M〈6.0, mB〉Ms, i.e., Ms underestimates magnitudes of such events, therefore, mB can be a better choice; In case M〉6.0, Ms〉mB〉mb, both mB and mb underestimate the magnitudes, so Ms is a preferable scale for determining magnitudes of such events (6.0〈M〈8.5); In case M〉8.5, a saturation phenomenon appears in Ms, which cannot give an accurate reflection of the magnitudes of such large events; ② In China, when the epicentral distance is less than 1 000 km, there is almost no difference between ME and Ms, and thus there is no need to convert between the two magnitudes in practice; ③ Although Ms and Ms7 are both surface wave magnitudes, Ms is in general greater than Ms7 by 0.2~0.3 magnitude, because different instruments and calculation formulae are used; ④ mB is almost equal to mb for earthquakes around mB4.0, but mB is larger than mb for those of mB〉4.5, because the periods of seismic waves used for measuring mB and mb are different though the calculation formulae are the same.展开更多
Through the Three Gorges well network, we examine different coseismic changes in water temperature caused by local earthquakes since 2008, and offer a mechanistic explanation.The relations between the coseismic change...Through the Three Gorges well network, we examine different coseismic changes in water temperature caused by local earthquakes since 2008, and offer a mechanistic explanation.The relations between the coseismic changes in water temperature and the parameters of distant and local earthquakes are deduced.展开更多
Based on the P wave first arrival time data of 275 local earthquakes recorded by Kunming Telemetered Seismic Network from 1982 to 1989, a 3-D velocity structure beneath the network was obtained by the separationmethod...Based on the P wave first arrival time data of 275 local earthquakes recorded by Kunming Telemetered Seismic Network from 1982 to 1989, a 3-D velocity structure beneath the network was obtained by the separationmethod of focal parameter and medium structure parameter and 3-D approximate ray tracing. In view of 'thesituation that the intervals between stations in the network is relatively long, and the local first arrival phasemay be Pn instead of P, so we simulated Pn as the diving wave from the layer beneath Moho and using approximate ray tracing method on the grid model. The final 3-D velocity structure is basically consistent withthe result from the deep seismic sounding and the anomaly inversion of Bouguer gravity. The Dianzhong area(in the vicinity of Dukou and Chuxiong) shows an obvious high velocity zone at depth of 45 km, which canbe interpreted as the uplift of Moho discontinuity. The upper crust in this area displays lower velocity zone,so the uplift of Moho discontinuity is considered as the result of isostatic compensation. The configuration ofvelocity contours indicates that the upper crust and lower crust are complicated, while the middle crust is relatively simple. This feature reveals that Yunnan area belongs to modern tectonically active region. As themain boundary of the major tectonic units in the study area, although there is no obvious evidence about lowvelocity anomaly zone along the Red River Fault, the fault shows up th feature of sturctural divide on themid-lower crustal velocity contours, and it is inferred that the fault passes through the Moho-discontinuity atleast.展开更多
In this work a Support Vector Machine Regression(SVMR) algorithm is used to calculate local magnitude(MI) using only five seconds of signal after the P wave onset of one three component seismic station. This algor...In this work a Support Vector Machine Regression(SVMR) algorithm is used to calculate local magnitude(MI) using only five seconds of signal after the P wave onset of one three component seismic station. This algorithm was trained with 863 records of historical earthquakes, where the input regression parameters were an exponential function of the waveform envelope estimated by least squares and the maximum value of the observed waveform for each component in a single station. Ten-fold cross validation was applied for a normalized polynomial kernel obtaining the mean absolute error for different exponents and complexity parameters. The local magnitude(MI) could be estimated with 0.19 units of mean absolute error. The proposed algorithm is easy to implement in hardware and may be used directly after the field seismological sensor to generate fast decisions at seismological control centers, increasing the possibility of having an effective reaction.展开更多
基金This work is jointly supported by the National Natural Science Foundation of China(No.41904057)the National Key Research and Development Program of China(No.2018YFC1503402).
文摘The Shimian area of Sichuan sits at the junction of the Bayan Har block.Sichuan-Yunnan rhombic block,and Yangtze block,where several faults intersect.This region features intense tectonic activity and frequent earthquakes.In this study,we used local seismic waveform data recorded using dense arrays deployed in the Shimian area to obtain the shear wave splitting parameters at 55 seismic stations and thereby determine the crustal anisotropic characteristics of the region.We then analyzed the crustal stress pattern and tectonic setting and explored their relationship in the study area.Although some stations returned a polarization direction of NNW-SSE.a dominant polarization direction of NW-SE was obtained for the fast shear wave at most seismic stations in the study area.The polarization directions of the fast shear wave were highly consistent throughout the study-area.This orientation was in accordance with the direction of the regional principal compressive stress and parallel to the trend of the Xianshuihe and Daliangshan faults.The distribution of crustal anisotropy in this area was affected by the regional tectonic stress field and the fault structures.The mean delay time between fast and slow shear waves was 3.83 ms/km.slightly greater than the values obtained in other regions of Sichuan.This indicates that the crustal media in our study area had a high anisotropic strength and also reveals the influence of tectonic complexity resulting from the intersection of multiple faults on the strength of seismic anisotropy.
基金Special Project on Earthquake from Ministry of Science and Technology of China.
文摘By linear regression and orthogonal regression methods, comparisons are made between different magnitudes (local magnitude ML, surface wave magnitudes Ms and MsT, long-period body wave magnitude mB and short-period body wave magnitude mb) determined by Institute of Geophysics, China Earthquake Administration, on the basis of observation data collected by China Seismograph Network between 1983 and 2004. Empirical relations between different magnitudes have been obtained. The result shows that: ① As different magnitude scales reflect radiated energy by seismic waves within different periods, earthquake magnitudes can be described more objectively by using different scales for earthquakes of different magnitudes. When the epicentral distance is less than 1000 km, local magnitude ME can be a preferable scale; In case M〈4.5, there is little difference between the magnitude scales; In case 4.5〈M〈6.0, mB〉Ms, i.e., Ms underestimates magnitudes of such events, therefore, mB can be a better choice; In case M〉6.0, Ms〉mB〉mb, both mB and mb underestimate the magnitudes, so Ms is a preferable scale for determining magnitudes of such events (6.0〈M〈8.5); In case M〉8.5, a saturation phenomenon appears in Ms, which cannot give an accurate reflection of the magnitudes of such large events; ② In China, when the epicentral distance is less than 1 000 km, there is almost no difference between ME and Ms, and thus there is no need to convert between the two magnitudes in practice; ③ Although Ms and Ms7 are both surface wave magnitudes, Ms is in general greater than Ms7 by 0.2~0.3 magnitude, because different instruments and calculation formulae are used; ④ mB is almost equal to mb for earthquakes around mB4.0, but mB is larger than mb for those of mB〉4.5, because the periods of seismic waves used for measuring mB and mb are different though the calculation formulae are the same.
基金supported by the China Three Gorges Corporation Research Fund (SXSN/3354)
文摘Through the Three Gorges well network, we examine different coseismic changes in water temperature caused by local earthquakes since 2008, and offer a mechanistic explanation.The relations between the coseismic changes in water temperature and the parameters of distant and local earthquakes are deduced.
文摘Based on the P wave first arrival time data of 275 local earthquakes recorded by Kunming Telemetered Seismic Network from 1982 to 1989, a 3-D velocity structure beneath the network was obtained by the separationmethod of focal parameter and medium structure parameter and 3-D approximate ray tracing. In view of 'thesituation that the intervals between stations in the network is relatively long, and the local first arrival phasemay be Pn instead of P, so we simulated Pn as the diving wave from the layer beneath Moho and using approximate ray tracing method on the grid model. The final 3-D velocity structure is basically consistent withthe result from the deep seismic sounding and the anomaly inversion of Bouguer gravity. The Dianzhong area(in the vicinity of Dukou and Chuxiong) shows an obvious high velocity zone at depth of 45 km, which canbe interpreted as the uplift of Moho discontinuity. The upper crust in this area displays lower velocity zone,so the uplift of Moho discontinuity is considered as the result of isostatic compensation. The configuration ofvelocity contours indicates that the upper crust and lower crust are complicated, while the middle crust is relatively simple. This feature reveals that Yunnan area belongs to modern tectonically active region. As themain boundary of the major tectonic units in the study area, although there is no obvious evidence about lowvelocity anomaly zone along the Red River Fault, the fault shows up th feature of sturctural divide on themid-lower crustal velocity contours, and it is inferred that the fault passes through the Moho-discontinuity atleast.
文摘In this work a Support Vector Machine Regression(SVMR) algorithm is used to calculate local magnitude(MI) using only five seconds of signal after the P wave onset of one three component seismic station. This algorithm was trained with 863 records of historical earthquakes, where the input regression parameters were an exponential function of the waveform envelope estimated by least squares and the maximum value of the observed waveform for each component in a single station. Ten-fold cross validation was applied for a normalized polynomial kernel obtaining the mean absolute error for different exponents and complexity parameters. The local magnitude(MI) could be estimated with 0.19 units of mean absolute error. The proposed algorithm is easy to implement in hardware and may be used directly after the field seismological sensor to generate fast decisions at seismological control centers, increasing the possibility of having an effective reaction.