Powdery mildew(PM),caused by Blumeria graminis f.sp.tritici(Bgt),is one of the destructive wheat diseases worldwide.Wild emmer wheat(Triticum turgidum ssp.dicoccoides,WEW),a tetraploid progenitor of common wheat,is a ...Powdery mildew(PM),caused by Blumeria graminis f.sp.tritici(Bgt),is one of the destructive wheat diseases worldwide.Wild emmer wheat(Triticum turgidum ssp.dicoccoides,WEW),a tetraploid progenitor of common wheat,is a valuable genetic resource for wheat disease resistance breeding programs.We developed three hexaploid pre-breeding lines with PM resistance genes derived from three WEW accessions.These resistant pre-breeding lines were crossed with susceptible common wheat accessions.Segregations in the F2populations were 3 resistant:1 susceptible,suggesting a single dominant allele in each resistant parent.Mapping of the resistance gene in each line indicated a single locus on the long arm of chromosome 7A,at the approximate location of previously cloned Pm60 from T.urartu.Sanger sequencing revealed three different Pm60 haplotypes(Hap 3,Hap 5,and Hap 6).Co-segregating diagnostic markers were developed for identification and selection of each haplotype.The resistance function of each haplotype was verified by the virus-induced gene silencing(VIGS).Common wheat lines carrying each of these Pm60 haplotypes were resistant to most Bgt isolates and differences in the response arrays suggested allelic variation in response.展开更多
In this study, the mechanical properties of aluminum-5%magnesium doped with rare earth metal neodymium were evaluated. Fuzzy logic (FL) and artificial neural network (ANN) were used to model the mechanical properties ...In this study, the mechanical properties of aluminum-5%magnesium doped with rare earth metal neodymium were evaluated. Fuzzy logic (FL) and artificial neural network (ANN) were used to model the mechanical properties of aluminum-5%magnesium (0-0.9 wt%) neodymium. The single input (SI) to the fuzzy logic and artificial neural network models was the percentage weight of neodymium, while the multiple outputs (MO) were average grain size, ultimate tensile strength, yield strength elongation and hardness. The fuzzy logic-based model showed more accurate prediction than the artificial neutral network-based model in terms of the correlation coefficient values (R).展开更多
Antimony-based anodes have attracted wide attention in potassium-ion batteries due to their high theoretical specific capacities(∼660 mA h g^(-1))and suitable voltage platforms.However,severe capacity fading caused b...Antimony-based anodes have attracted wide attention in potassium-ion batteries due to their high theoretical specific capacities(∼660 mA h g^(-1))and suitable voltage platforms.However,severe capacity fading caused by huge volume change and limited ion transportation hinders their practical applications.Recently,strategies for controlling the morphologies of Sb-based materials to improve the electrochemical performances have been proposed.Among these,the two-dimensional Sb(2D-Sb)materials present excellent properties due to shorted ion immigration paths and enhanced ion diffusion.Nevertheless,the synthetic methods are usually tedious,and even the mechanism of these strategies remains elusive,especially how to obtain large-scale 2D-Sb materials.Herein,a novel strategy to synthesize 2D-Sb material using a straightforward solvothermal method without the requirement of a complex nanostructure design is provided.This method leverages the selective adsorption of aldehyde groups in furfural to induce crystal growth,while concurrently reducing and coating a nitrogen-doped carbon layer.Compared to the reported methods,it is simpler,more efficient,and conducive to the production of composite nanosheets with uniform thickness(3–4 nm).The 2D-Sb@NC nanosheet anode delivers an extremely high capacity of 504.5 mA h g^(-1) at current densities of 100 mA g^(-1) and remains stable for more than 200 cycles.Through characterizations and molecular dynamic simulations,how potassium storage kinetics between 2D Sb-based materials and bulk Sb-based materials are explored,and detailed explanations are provided.These findings offer novel insights into the development of durable 2D alloy-based anodes for next-generation potassium-ion batteries.展开更多
The four-color three-step selective photoionization process of atom is very important in laser isotope separation technology.The population trapping phenomena and their influences are studied theoretically in monochro...The four-color three-step selective photoionization process of atom is very important in laser isotope separation technology.The population trapping phenomena and their influences are studied theoretically in monochromatic and non-monochromatic laser fields based on the density matrix theory in this work.Time evolutions of the photoionization properties of the four-color,three-step process are given.The population trapping effects occur intensely in monochromatic excitation,while it gradually turns weak as the laser bandwidth increases.The effects of bandwidth,Rabi frequency,time delay,and frequency detuning on the population trapping effect are investigated in monochromatic and non-monochromatic laser fields.The effects of laser process parameters and atomic parameters on the effective selective photoionization are also discussed.The ionization probability and selectivity factors,as evaluation indexes,are difficult to improve synchronously by adjusting systematic parameters.Besides,the existence of metastable state may play a negative role when its population is low enough.展开更多
As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Hybr...As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Hybrid electric vehicles (HEVs) have been introduced to mitigate problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in a vehicle. A large section in the software development process is the implementation of an optimal energy management strategy meant to improve the overall fuel efficiency of the vehicle. Optimal strategies can be implemented when driving conditions are known a prior. The Equivalent Consumption Minimization Strategy (ECMS) is an optimal control strategy that uses an equivalence factor to equate electrical to mechanical power when performing torque split determination between the internal combustion engine and electric motor for propulsive and regenerative torque. This equivalence factor is determined from offline vehicle simulations using a sensitivity analysis to provide optimal fuel economy results while maintaining predetermined high voltage battery state of charge (SOC) constraints. When the control hierarchy is modified or different driving styles are applied, the analysis must be redone to update the equivalence factor. The goal of this work is to implement a fuzzy logic controller that dynamically updates the equivalence factor to improve fuel economy, maintain a strict charge sustaining window of operation for the high voltage battery, and reduce computational time required during algorithm development. The adaptive algorithm is validated against global optimum fuel economy and charge sustaining results from a sensitivity analysis performed for multiple drive cycles. Results show a maximum fuel economy improvement of 9.82% when using a mild driving style and a 95% success rate when maintaining an ending SOC within 5% of the desired SOC regardless of starting SOC.展开更多
Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a seri...Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.展开更多
The Cu-exchanged SSZ-13 with the small-pore chabazite framework is considered as a highly efficient catalyst for selective catalytic reduction of NO with NH_(3)(NH_(3)-SCR).In order to further improve the catalytic pr...The Cu-exchanged SSZ-13 with the small-pore chabazite framework is considered as a highly efficient catalyst for selective catalytic reduction of NO with NH_(3)(NH_(3)-SCR).In order to further improve the catalytic property,a series of Mn ion-assisted Cu/SSZ-13 powder catalysts were prepared by co-exchange method and stepwise exchange method.It is found that the NH_(3)-SCR activity,N_(2) selectivity,hydrothermal stability and sulfur resistance of Cu/SSZ-13 are promoted by introducing a minority of Mn(0.15%to 0.23%(mass))through co-exchange method.Characterization results reveal that the Cu,Mn co-exchange enables the higher amounts of Cu^(2+)active sites,the abundant medium strong and strong acid,the optimized ratio of Lewis acid to Brønsted acid etc.,which are required for a good NH_(3)-SCR catalytic property over broad temperature range and under harsh working environment.Moreover,a monolithic catalyst was prepared by impregnating a cordierite ceramic support into the coating slurry containing the optimized CuMn/SSZ-13 powder.The diesel engine bench tests show that Cu,Mn co-exchange gives the monolith catalyst a better catalytic property than commercial catalysts.This work provides an important guidance for the rational design of secondary-ion-assisted zeolites applied in NH_(3)-SCR.展开更多
Lithium recovery from end-of-life Li-ion batteries(LIBs)through pyro-and hydrometallurgical recycling processes involves several refining stages,with high consumption of reagents and energy.A competitive technological...Lithium recovery from end-of-life Li-ion batteries(LIBs)through pyro-and hydrometallurgical recycling processes involves several refining stages,with high consumption of reagents and energy.A competitive technological alternative is the electrochemical oxidation of the cathode materials,whereby lithium can be deintercalated and transferred to an electrolyte solution without the aid of chemical extracting compounds.This article investigates the potential to selectively recover Li from LIB cathode materials by direct electrochemical extraction in aqueous solutions.The process allowed to recovering up to 98%of Li from high-purity commercial cathode materials(LiMn_(2)O_(4),LiCoO_(2),and Li Ni_(1/3)Mn_(1/3)Co_(1/3)O_(2))with a faradaic efficiency of 98%and negligible co-extraction of Co,Ni,and Mn.The process was then applied to recover Li from the real waste LIBs black mass obtained by the physical treatment of electric vehicle battery packs.This black mass contained graphite,conductive carbon,and metal impurities from current collectors and steel cases,which significantly influenced the evolution and performances of Li electrochemical extraction.Particularly,due to concomitant oxidation of impurities,lithium extraction yields and faradaic efficiencies were lower than those obtained with high-purity cathode materials.Copper oxidation was found to occur within the voltage range investigated,but it could not quantitatively explain the reduced Li extraction performances.In fact,a detailed investigation revealed that above 1.3 V vs.Ag/Ag Cl,conductive carbon can be oxidized,contributing to the decreased Li extraction.Based on the reported experimental results,guidelines were provided that quantitatively enable the extraction of Li from the black mass,while preventing the simultaneous oxidation of impurities and,consequently,reducing the energy consumption of the proposed Li recovery method.展开更多
The research purpose of this dissertation is threefold: to innovate artificial intelligence methods, to create the intersection of artificial intelligence and biological research, and to innovate human methodology. Th...The research purpose of this dissertation is threefold: to innovate artificial intelligence methods, to create the intersection of artificial intelligence and biological research, and to innovate human methodology. The work I have done in my research includes: improving logical structure and logical engineering, using my theory to study the innovation of the development path of artificial intelligence, using my theory to create biomimetic logic, a new intersection of artificial intelligence and biological research, and exploring the innovation of human methodology through the previous two works. The results of the research are as follows: 1) Introduction to bionic logic, incorporating simulations of people, society, and life as core principles. 2) Definition of the logical structure as the primary focus of research, with logic mechanics serving as foundational research principles. 3) Examination of the logical structure’s environment through logical fields and networks. 4) Study of logical structure communication via logical networks and main lines. 5) Proposal of data logic. 6) Investigation into the logic of logical structures, employing structural diagrams of logical equations. 7) Development of a theory of life activity within logical structures, encompassing information reasoning, its corresponding control structure, and structural reasoning. 8) Introduction of the lifecycle theory for logical structures and examination of the clock equation. 9) Exploration of logical structure intelligence. 10) Study of logical structures in mathematical forms. 11) Introduction of logic engineering. 12) Examination of artificial intelligence’s significance. 13) Investigation into the significance of human methodology.展开更多
Model checking is an automated formal verification method to verify whether epistemic multi-agent systems adhere to property specifications.Although there is an extensive literature on qualitative properties such as s...Model checking is an automated formal verification method to verify whether epistemic multi-agent systems adhere to property specifications.Although there is an extensive literature on qualitative properties such as safety and liveness,there is still a lack of quantitative and uncertain property verifications for these systems.In uncertain environments,agents must make judicious decisions based on subjective epistemic.To verify epistemic and measurable properties in multi-agent systems,this paper extends fuzzy computation tree logic by introducing epistemic modalities and proposing a new Fuzzy Computation Tree Logic of Knowledge(FCTLK).We represent fuzzy multi-agent systems as distributed knowledge bases with fuzzy epistemic interpreted systems.In addition,we provide a transformation algorithm from fuzzy epistemic interpreted systems to fuzzy Kripke structures,as well as transformation rules from FCTLK formulas to Fuzzy Computation Tree Logic(FCTL)formulas.Accordingly,we transform the FCTLK model checking problem into the FCTL model checking.This enables the verification of FCTLK formulas by using the fuzzy model checking algorithm of FCTL without additional computational overheads.Finally,we present correctness proofs and complexity analyses of the proposed algorithms.Additionally,we further illustrate the practical application of our approach through an example of a train control system.展开更多
Background:Hepatocellular carcinoma(HCC)has a poor long-term prognosis.The competition of circular RNAs(circRNAs)with endogenous RNA is a novel tool for predicting HCC prognosis.Based on the alterations of circRNA reg...Background:Hepatocellular carcinoma(HCC)has a poor long-term prognosis.The competition of circular RNAs(circRNAs)with endogenous RNA is a novel tool for predicting HCC prognosis.Based on the alterations of circRNA regulatory networks,the analysis of gene modules related to HCC is feasible.Methods:Multiple expression datasets and RNA element targeting prediction tools were used to construct a circRNA-microRNA-mRNA network in HCC.Gene function,pathway,and protein interaction analyses were performed for the differentially expressed genes(DEGs)in this regulatory network.In the proteinprotein interaction network,hub genes were identified and subjected to regression analysis,producing an optimized four-gene signature for prognostic risk stratification in HCC patients.Anti-HCC drugs were excavated by assessing the DEGs between the low-and high-risk groups.A circRNA-microRNA-hub gene subnetwork was constructed,in which three hallmark genes,KIF4A,CCNA2,and PBK,were subjected to functional enrichment analysis.Results:A four-gene signature(KIF4A,CCNA2,PBK,and ZWINT)that effectively estimated the overall survival and aided in prognostic risk assessment in the The Cancer Genome Atlas(TCGA)cohort and International Cancer Genome Consortium(ICGC)cohort was developed.CDK inhibitors,PI3K inhibitors,HDAC inhibitors,and EGFR inhibitors were predicted as four potential mechanisms of drug action(MOA)in high-risk HCC patients.Subsequent analysis has revealed that PBK,CCNA2,and KIF4A play a crucial role in regulating the tumor microenvironment by promoting immune cell invasion,regulating microsatellite instability(MSI),and exerting an impact on HCC progression.Conclusions:The present study highlights the role of the circRNA-related regulatory network,identifies a four-gene prognostic signature and biomarkers,and further identifies novel therapy for HCC.展开更多
Objective:To determine the genetic diversity of Plasmodium(P.)knowlesi isolates from Sabah,Malaysian Borneo and Peninsular Malaysia,targeting the S-type SSU rRNA gene and including aspects of natural selection and hap...Objective:To determine the genetic diversity of Plasmodium(P.)knowlesi isolates from Sabah,Malaysian Borneo and Peninsular Malaysia,targeting the S-type SSU rRNA gene and including aspects of natural selection and haplotype.Methods:Thirty-nine blood samples infected with P.knowlesi were collected in Sabah,Malaysian Borneo and Peninsular Malaysia.The S-type SSU rRNA gene was amplified using polymerase chain reaction,cloned into a vector,and sequenced.The natural selection and haplotype of the S-type SSU rRNA gene sequences were determined using DnaSP v6 and illustrated using NETWORK v10.This study's 39 S-type SSU rRNA sequences and eight sequences from the Genbank database were subjected to phylogenetic analysis using MEGA 11.Results:Overall,the phylogenetic analysis showed no evidence of a geographical cluster of P.knowlesi isolates from different areas in Malaysia based on the S-type SSU rRNA gene sequences.The S-type SSU rRNA gene sequences were relatively conserved and with a purifying effect.Haplotype sharing of the S-type SSU rRNA gene was observed between the P.knowlesi isolates in Sabah,Malaysian Borneo,but not between Sabah,Malaysian Borneo and Peninsular Malaysia.Conclusions:This study suggests that the S-type SSU rRNA gene of P.knowlesi isolates in Sabah,Malaysian Borneo,and Peninsular Malaysia has fewer polymorphic sites,representing the conservation of the gene.These features make the S-type SSU rRNA gene suitable for comparative studies,such as determining the evolutionary relationships and common ancestry among P.knowlesi species.展开更多
Animal body size variation is of particular interest in evolutionary biology,but the genetic basis remains largely unknown.Previous studies have shown the presence of two parallel evolutionary genetic clusters within ...Animal body size variation is of particular interest in evolutionary biology,but the genetic basis remains largely unknown.Previous studies have shown the presence of two parallel evolutionary genetic clusters within the fish genus Epinephelus with evident divergence in body size,providing an excellent opportunity to investigate the genetic basis of body size variation in vertebrates.Herein,we performed phylotranscriptomic analysis and reconstructed the phylogeny of 13 epinephelids originating from the South China Sea.Two genetic clades with an estimated divergence time of approximately 15.4 million years ago were correlated with large and small body size,respectively.A total of 180 rapidly evolving genes and two positively selected genes were identified between the two groups.Functional enrichment analyses of these candidate genes revealed distinct enrichment categories between the two groups.These pathways and genes may play important roles in body size variation in groupers through complex regulatory networks.Based on our results,we speculate that the ancestors of the two divergent groups of groupers may have adapted to different environments through habitat selection,leading to genetic variations in metabolic patterns,organ development,and lifespan,resulting in body size divergence between the two locally adapted populations.These findings provide important insights into the genetic mechanisms underlying body size variation in groupers and species differentiation.展开更多
This article presents a fuzzy logic-based approach to coordinate the control devices of the power system, such as Power System Stabilizers (PSS) and Static Synchronous Compensators (STATCOM), to damp power oscillation...This article presents a fuzzy logic-based approach to coordinate the control devices of the power system, such as Power System Stabilizers (PSS) and Static Synchronous Compensators (STATCOM), to damp power oscillations caused by dynamic disturbances. At first, we used the Lyapunov method to study the dynamic stability of the power grid in the Republic of Congo. This method allowed us to analyze the eigenvalues of the state variable matrix and highlight the eigenvalues in the complex plane. Secondly, we proposed a fuzzy logic-based controller to account for uncertainties existing near the thresholds. The inputs to this controller are the generator speed and generator rotor angle. We demonstrated the effectiveness and feasibility of this fuzzy control by applying it to the power grid of the Republic of Congo, with three power stabilizers and two STATCOMs. .展开更多
Through its media logic, which is defined by programmability, pervasiveness, connectivity, and datafication, WeChat establishes a non-linear, interactive, and user-dominated media environment. This media logic enhance...Through its media logic, which is defined by programmability, pervasiveness, connectivity, and datafication, WeChat establishes a non-linear, interactive, and user-dominated media environment. This media logic enhances the influence of each user within WeChat’s narrative landscape and revolutionises traditional media narration methods by enabling them to generate and distribute content. In such an environment, users are able to edit, receive, and send information without constraints of time or distance, which enables delayed interactions that broaden the potential for human communication and dissemination. Additionally, WeChat partially replaces social behaviours and institutions, thereby modifying their original structures and characteristics. As individuals become more accustomed to this media environment, they progressively adjust to the forms that are appropriate for media representation on WeChat, thereby completing the mediatization of culture and society. In this process, individuals are becoming more dependent on media and media logic, with WeChat’s influence permeating social and cultural activities through its media logic. This interaction has a substantial impact on society and culture, thereby aiding in their reconstruction.展开更多
Although there are many different types of philosophy, many philosophers agree that the mainstream of Western philosophy (Socrates, Plato, Aristotle, Descartes, Kant, Wittgenstein) developed toward the perfection of S...Although there are many different types of philosophy, many philosophers agree that the mainstream of Western philosophy (Socrates, Plato, Aristotle, Descartes, Kant, Wittgenstein) developed toward the perfection of Socrates’ absolutism. But can the absolutism maintain its central position after analytic philosophy? There are pessimistic views on this problem, such as that of R. Rorty, the standard-bearer of neo-pragmatism. Recently, I proposed quantum language (which is including quantum mechanics, statistics, fuzzy sets, etc.). I think that that this theory is not only one of the most fundamental scientific theories, but also the scientific final destination of Western philosophy. If so, Socrates’ dream has come true. The purpose of this paper is to discuss the above and to inform readers that quantum language has the power to create a paradigm shift from the classical mechanical world view to the quantum mechanical worldview.展开更多
In the context of induction motor control, there are various control strategies used to separately control torque and flux. One common approach is known as Field-Oriented Control (FOC). This technique involves transfo...In the context of induction motor control, there are various control strategies used to separately control torque and flux. One common approach is known as Field-Oriented Control (FOC). This technique involves transforming the three-phase currents and voltages into a rotating reference frame, commonly referred to as the “dq” frame. In this frame, the torque/speed and flux components are decoupled, allowing for independent control, by doing so, the motor’s speed can be regulated accurately and maintain a constant flux which is crucial to ensure optimal motor performance and efficiency. The research focused on studying and simulating a field-oriented control system using fuzzy control techniques for an induction motor. The aim was to address the issue of parameter variations, particularly the change in rotor resistance during motor operation, which causes the control system to deviate from the desired direction. This deviation implies to an increase in the magnetic flux value, specifically the flux component on the q-axis. By employing fuzzy logic techniques to regulate flux vector’s components in the dq frame, this problem was successfully resolved, ensuring that the magnetic flux value remains within the nominal limits. To enhance the control system’s performance, response speed, and efficiency of the motor, sliding mode controllers were implemented to regulate the current in the inner loop. The simulation results demonstrated the proficiency of the proposed methodology.展开更多
Aiming at the consumption problems caused by the high proportion of renewable energy being connected to the distribution network,it also aims to improve the power supply reliability of the power system and reduce the ...Aiming at the consumption problems caused by the high proportion of renewable energy being connected to the distribution network,it also aims to improve the power supply reliability of the power system and reduce the operating costs of the power system.This paper proposes a two-stage planning method for distributed generation and energy storage systems that considers the hierarchical partitioning of source-storage-load.Firstly,an electrical distance structural index that comprehensively considers active power output and reactive power output is proposed to divide the distributed generation voltage regulation domain and determine the access location and number of distributed power sources.Secondly,a two-stage planning is carried out based on the zoning results.In the phase 1 distribution network-zoning optimization layer,the network loss is minimized so that the node voltage in the area does not exceed the limit,and the distributed generation configuration results are initially determined;in phase 2,the partition-node optimization layer is planned with the goal of economic optimization,and the distance-based improved ant lion algorithm is used to solve the problem to obtain the optimal distributed generation and energy storage systemconfiguration.Finally,the IEEE33 node systemwas used for simulation.The results showed that the voltage quality was significantly improved after optimization,and the overall revenue increased by about 20.6%,verifying the effectiveness of the two-stage planning.展开更多
A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequenc...A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequence within the sampling period is calculated. Lagrange interpolation is used to fit the overlapping rate curve of the sequence. An empirical threshold for the overlapping rate is then applied to filter candidate key frames from the sequence. In the second stage, the principle of minimizing remapping spots is used to dynamically adjust and determine the final key frame close to the candidate key frames. Comparative experiments show that the proposed method significantly improves stitching speed and accuracy by more than 40%.展开更多
This article conducts an analysis and exploration of the English subtitles translation of the domestic animated film Chang’an from the perspective of eco-translatology.Taking three-dimensional transformation as the e...This article conducts an analysis and exploration of the English subtitles translation of the domestic animated film Chang’an from the perspective of eco-translatology.Taking three-dimensional transformation as the entry point,it analyzes the adaptation and selection of subtitle translators in the translation process from the dimensions of language,culture,and communication in Chang’an,aiming to enrich the practical analysis of eco-translatology and provide valuable insights and references for the theoretical construction and practical application of eco-translatology.This article enriches the practical analysis of eco-translatology and also validates to a certain extent the applicability of“three-dimensional”transformation.展开更多
基金supported by grants from the National Key Research and Development Program of China(2023YFF1000404,2022YFF10001501)the National Natural Science Foundation of China(32171971)。
文摘Powdery mildew(PM),caused by Blumeria graminis f.sp.tritici(Bgt),is one of the destructive wheat diseases worldwide.Wild emmer wheat(Triticum turgidum ssp.dicoccoides,WEW),a tetraploid progenitor of common wheat,is a valuable genetic resource for wheat disease resistance breeding programs.We developed three hexaploid pre-breeding lines with PM resistance genes derived from three WEW accessions.These resistant pre-breeding lines were crossed with susceptible common wheat accessions.Segregations in the F2populations were 3 resistant:1 susceptible,suggesting a single dominant allele in each resistant parent.Mapping of the resistance gene in each line indicated a single locus on the long arm of chromosome 7A,at the approximate location of previously cloned Pm60 from T.urartu.Sanger sequencing revealed three different Pm60 haplotypes(Hap 3,Hap 5,and Hap 6).Co-segregating diagnostic markers were developed for identification and selection of each haplotype.The resistance function of each haplotype was verified by the virus-induced gene silencing(VIGS).Common wheat lines carrying each of these Pm60 haplotypes were resistant to most Bgt isolates and differences in the response arrays suggested allelic variation in response.
文摘In this study, the mechanical properties of aluminum-5%magnesium doped with rare earth metal neodymium were evaluated. Fuzzy logic (FL) and artificial neural network (ANN) were used to model the mechanical properties of aluminum-5%magnesium (0-0.9 wt%) neodymium. The single input (SI) to the fuzzy logic and artificial neural network models was the percentage weight of neodymium, while the multiple outputs (MO) were average grain size, ultimate tensile strength, yield strength elongation and hardness. The fuzzy logic-based model showed more accurate prediction than the artificial neutral network-based model in terms of the correlation coefficient values (R).
基金financially supported by the Science and Technology Development Program of Jilin Province(YDZJ202101ZYTS185)the National Natural Science Foundation of China(21975250)。
文摘Antimony-based anodes have attracted wide attention in potassium-ion batteries due to their high theoretical specific capacities(∼660 mA h g^(-1))and suitable voltage platforms.However,severe capacity fading caused by huge volume change and limited ion transportation hinders their practical applications.Recently,strategies for controlling the morphologies of Sb-based materials to improve the electrochemical performances have been proposed.Among these,the two-dimensional Sb(2D-Sb)materials present excellent properties due to shorted ion immigration paths and enhanced ion diffusion.Nevertheless,the synthetic methods are usually tedious,and even the mechanism of these strategies remains elusive,especially how to obtain large-scale 2D-Sb materials.Herein,a novel strategy to synthesize 2D-Sb material using a straightforward solvothermal method without the requirement of a complex nanostructure design is provided.This method leverages the selective adsorption of aldehyde groups in furfural to induce crystal growth,while concurrently reducing and coating a nitrogen-doped carbon layer.Compared to the reported methods,it is simpler,more efficient,and conducive to the production of composite nanosheets with uniform thickness(3–4 nm).The 2D-Sb@NC nanosheet anode delivers an extremely high capacity of 504.5 mA h g^(-1) at current densities of 100 mA g^(-1) and remains stable for more than 200 cycles.Through characterizations and molecular dynamic simulations,how potassium storage kinetics between 2D Sb-based materials and bulk Sb-based materials are explored,and detailed explanations are provided.These findings offer novel insights into the development of durable 2D alloy-based anodes for next-generation potassium-ion batteries.
文摘The four-color three-step selective photoionization process of atom is very important in laser isotope separation technology.The population trapping phenomena and their influences are studied theoretically in monochromatic and non-monochromatic laser fields based on the density matrix theory in this work.Time evolutions of the photoionization properties of the four-color,three-step process are given.The population trapping effects occur intensely in monochromatic excitation,while it gradually turns weak as the laser bandwidth increases.The effects of bandwidth,Rabi frequency,time delay,and frequency detuning on the population trapping effect are investigated in monochromatic and non-monochromatic laser fields.The effects of laser process parameters and atomic parameters on the effective selective photoionization are also discussed.The ionization probability and selectivity factors,as evaluation indexes,are difficult to improve synchronously by adjusting systematic parameters.Besides,the existence of metastable state may play a negative role when its population is low enough.
文摘As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Hybrid electric vehicles (HEVs) have been introduced to mitigate problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in a vehicle. A large section in the software development process is the implementation of an optimal energy management strategy meant to improve the overall fuel efficiency of the vehicle. Optimal strategies can be implemented when driving conditions are known a prior. The Equivalent Consumption Minimization Strategy (ECMS) is an optimal control strategy that uses an equivalence factor to equate electrical to mechanical power when performing torque split determination between the internal combustion engine and electric motor for propulsive and regenerative torque. This equivalence factor is determined from offline vehicle simulations using a sensitivity analysis to provide optimal fuel economy results while maintaining predetermined high voltage battery state of charge (SOC) constraints. When the control hierarchy is modified or different driving styles are applied, the analysis must be redone to update the equivalence factor. The goal of this work is to implement a fuzzy logic controller that dynamically updates the equivalence factor to improve fuel economy, maintain a strict charge sustaining window of operation for the high voltage battery, and reduce computational time required during algorithm development. The adaptive algorithm is validated against global optimum fuel economy and charge sustaining results from a sensitivity analysis performed for multiple drive cycles. Results show a maximum fuel economy improvement of 9.82% when using a mild driving style and a 95% success rate when maintaining an ending SOC within 5% of the desired SOC regardless of starting SOC.
基金financially supported by the Young Scientists Fund of the National Natural Science Foundation of China(Nos.52104395 and 52304365)the Science and Technology Planning Project of Guangzhou,China(Nos.202102021080 and 2024A04J10006)+1 种基金the National Key R&D Program of China(No.2021YFC2902605)the Natural Science Foundation of Guangdong Province,China(Nos.2023A1515030145 and 2023A1515011847)。
文摘Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.
文摘The Cu-exchanged SSZ-13 with the small-pore chabazite framework is considered as a highly efficient catalyst for selective catalytic reduction of NO with NH_(3)(NH_(3)-SCR).In order to further improve the catalytic property,a series of Mn ion-assisted Cu/SSZ-13 powder catalysts were prepared by co-exchange method and stepwise exchange method.It is found that the NH_(3)-SCR activity,N_(2) selectivity,hydrothermal stability and sulfur resistance of Cu/SSZ-13 are promoted by introducing a minority of Mn(0.15%to 0.23%(mass))through co-exchange method.Characterization results reveal that the Cu,Mn co-exchange enables the higher amounts of Cu^(2+)active sites,the abundant medium strong and strong acid,the optimized ratio of Lewis acid to Brønsted acid etc.,which are required for a good NH_(3)-SCR catalytic property over broad temperature range and under harsh working environment.Moreover,a monolithic catalyst was prepared by impregnating a cordierite ceramic support into the coating slurry containing the optimized CuMn/SSZ-13 powder.The diesel engine bench tests show that Cu,Mn co-exchange gives the monolith catalyst a better catalytic property than commercial catalysts.This work provides an important guidance for the rational design of secondary-ion-assisted zeolites applied in NH_(3)-SCR.
基金the Horizon Europe Project“Batteries reuse and direct production of high performances cathodic and anodic materials and other raw materials from batteries recycling using low cost and environmentally friendly technologies” (RHINOCEROS project,grant no.101069685)。
文摘Lithium recovery from end-of-life Li-ion batteries(LIBs)through pyro-and hydrometallurgical recycling processes involves several refining stages,with high consumption of reagents and energy.A competitive technological alternative is the electrochemical oxidation of the cathode materials,whereby lithium can be deintercalated and transferred to an electrolyte solution without the aid of chemical extracting compounds.This article investigates the potential to selectively recover Li from LIB cathode materials by direct electrochemical extraction in aqueous solutions.The process allowed to recovering up to 98%of Li from high-purity commercial cathode materials(LiMn_(2)O_(4),LiCoO_(2),and Li Ni_(1/3)Mn_(1/3)Co_(1/3)O_(2))with a faradaic efficiency of 98%and negligible co-extraction of Co,Ni,and Mn.The process was then applied to recover Li from the real waste LIBs black mass obtained by the physical treatment of electric vehicle battery packs.This black mass contained graphite,conductive carbon,and metal impurities from current collectors and steel cases,which significantly influenced the evolution and performances of Li electrochemical extraction.Particularly,due to concomitant oxidation of impurities,lithium extraction yields and faradaic efficiencies were lower than those obtained with high-purity cathode materials.Copper oxidation was found to occur within the voltage range investigated,but it could not quantitatively explain the reduced Li extraction performances.In fact,a detailed investigation revealed that above 1.3 V vs.Ag/Ag Cl,conductive carbon can be oxidized,contributing to the decreased Li extraction.Based on the reported experimental results,guidelines were provided that quantitatively enable the extraction of Li from the black mass,while preventing the simultaneous oxidation of impurities and,consequently,reducing the energy consumption of the proposed Li recovery method.
文摘The research purpose of this dissertation is threefold: to innovate artificial intelligence methods, to create the intersection of artificial intelligence and biological research, and to innovate human methodology. The work I have done in my research includes: improving logical structure and logical engineering, using my theory to study the innovation of the development path of artificial intelligence, using my theory to create biomimetic logic, a new intersection of artificial intelligence and biological research, and exploring the innovation of human methodology through the previous two works. The results of the research are as follows: 1) Introduction to bionic logic, incorporating simulations of people, society, and life as core principles. 2) Definition of the logical structure as the primary focus of research, with logic mechanics serving as foundational research principles. 3) Examination of the logical structure’s environment through logical fields and networks. 4) Study of logical structure communication via logical networks and main lines. 5) Proposal of data logic. 6) Investigation into the logic of logical structures, employing structural diagrams of logical equations. 7) Development of a theory of life activity within logical structures, encompassing information reasoning, its corresponding control structure, and structural reasoning. 8) Introduction of the lifecycle theory for logical structures and examination of the clock equation. 9) Exploration of logical structure intelligence. 10) Study of logical structures in mathematical forms. 11) Introduction of logic engineering. 12) Examination of artificial intelligence’s significance. 13) Investigation into the significance of human methodology.
基金The work is partially supported by Natural Science Foundation of Ningxia(Grant No.AAC03300)National Natural Science Foundation of China(Grant No.61962001)Graduate Innovation Project of North Minzu University(Grant No.YCX23152).
文摘Model checking is an automated formal verification method to verify whether epistemic multi-agent systems adhere to property specifications.Although there is an extensive literature on qualitative properties such as safety and liveness,there is still a lack of quantitative and uncertain property verifications for these systems.In uncertain environments,agents must make judicious decisions based on subjective epistemic.To verify epistemic and measurable properties in multi-agent systems,this paper extends fuzzy computation tree logic by introducing epistemic modalities and proposing a new Fuzzy Computation Tree Logic of Knowledge(FCTLK).We represent fuzzy multi-agent systems as distributed knowledge bases with fuzzy epistemic interpreted systems.In addition,we provide a transformation algorithm from fuzzy epistemic interpreted systems to fuzzy Kripke structures,as well as transformation rules from FCTLK formulas to Fuzzy Computation Tree Logic(FCTL)formulas.Accordingly,we transform the FCTLK model checking problem into the FCTL model checking.This enables the verification of FCTLK formulas by using the fuzzy model checking algorithm of FCTL without additional computational overheads.Finally,we present correctness proofs and complexity analyses of the proposed algorithms.Additionally,we further illustrate the practical application of our approach through an example of a train control system.
基金This study was supported by grants from the High-level Preresearch Program of Zhejiang Shuren University 2019(KXJ121860)Zhejiang Provincial Natural Science Foundation of China(LQ20H190004)。
文摘Background:Hepatocellular carcinoma(HCC)has a poor long-term prognosis.The competition of circular RNAs(circRNAs)with endogenous RNA is a novel tool for predicting HCC prognosis.Based on the alterations of circRNA regulatory networks,the analysis of gene modules related to HCC is feasible.Methods:Multiple expression datasets and RNA element targeting prediction tools were used to construct a circRNA-microRNA-mRNA network in HCC.Gene function,pathway,and protein interaction analyses were performed for the differentially expressed genes(DEGs)in this regulatory network.In the proteinprotein interaction network,hub genes were identified and subjected to regression analysis,producing an optimized four-gene signature for prognostic risk stratification in HCC patients.Anti-HCC drugs were excavated by assessing the DEGs between the low-and high-risk groups.A circRNA-microRNA-hub gene subnetwork was constructed,in which three hallmark genes,KIF4A,CCNA2,and PBK,were subjected to functional enrichment analysis.Results:A four-gene signature(KIF4A,CCNA2,PBK,and ZWINT)that effectively estimated the overall survival and aided in prognostic risk assessment in the The Cancer Genome Atlas(TCGA)cohort and International Cancer Genome Consortium(ICGC)cohort was developed.CDK inhibitors,PI3K inhibitors,HDAC inhibitors,and EGFR inhibitors were predicted as four potential mechanisms of drug action(MOA)in high-risk HCC patients.Subsequent analysis has revealed that PBK,CCNA2,and KIF4A play a crucial role in regulating the tumor microenvironment by promoting immune cell invasion,regulating microsatellite instability(MSI),and exerting an impact on HCC progression.Conclusions:The present study highlights the role of the circRNA-related regulatory network,identifies a four-gene prognostic signature and biomarkers,and further identifies novel therapy for HCC.
基金This study was supported by the Ministry of Higher Education,Malaysia(FRGS0322-SG-1/2013)Universiti Malaysia Sabah(GUG0521-2/2020).
文摘Objective:To determine the genetic diversity of Plasmodium(P.)knowlesi isolates from Sabah,Malaysian Borneo and Peninsular Malaysia,targeting the S-type SSU rRNA gene and including aspects of natural selection and haplotype.Methods:Thirty-nine blood samples infected with P.knowlesi were collected in Sabah,Malaysian Borneo and Peninsular Malaysia.The S-type SSU rRNA gene was amplified using polymerase chain reaction,cloned into a vector,and sequenced.The natural selection and haplotype of the S-type SSU rRNA gene sequences were determined using DnaSP v6 and illustrated using NETWORK v10.This study's 39 S-type SSU rRNA sequences and eight sequences from the Genbank database were subjected to phylogenetic analysis using MEGA 11.Results:Overall,the phylogenetic analysis showed no evidence of a geographical cluster of P.knowlesi isolates from different areas in Malaysia based on the S-type SSU rRNA gene sequences.The S-type SSU rRNA gene sequences were relatively conserved and with a purifying effect.Haplotype sharing of the S-type SSU rRNA gene was observed between the P.knowlesi isolates in Sabah,Malaysian Borneo,but not between Sabah,Malaysian Borneo and Peninsular Malaysia.Conclusions:This study suggests that the S-type SSU rRNA gene of P.knowlesi isolates in Sabah,Malaysian Borneo,and Peninsular Malaysia has fewer polymorphic sites,representing the conservation of the gene.These features make the S-type SSU rRNA gene suitable for comparative studies,such as determining the evolutionary relationships and common ancestry among P.knowlesi species.
基金supported by the National Natural Science Foundation of China (32273136,31872572)Agriculture Research System of China (ARS-47)+1 种基金Science and Technology Planning Project of Guangdong Province (2023B1212060023)Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai) (SML2023SP201)。
文摘Animal body size variation is of particular interest in evolutionary biology,but the genetic basis remains largely unknown.Previous studies have shown the presence of two parallel evolutionary genetic clusters within the fish genus Epinephelus with evident divergence in body size,providing an excellent opportunity to investigate the genetic basis of body size variation in vertebrates.Herein,we performed phylotranscriptomic analysis and reconstructed the phylogeny of 13 epinephelids originating from the South China Sea.Two genetic clades with an estimated divergence time of approximately 15.4 million years ago were correlated with large and small body size,respectively.A total of 180 rapidly evolving genes and two positively selected genes were identified between the two groups.Functional enrichment analyses of these candidate genes revealed distinct enrichment categories between the two groups.These pathways and genes may play important roles in body size variation in groupers through complex regulatory networks.Based on our results,we speculate that the ancestors of the two divergent groups of groupers may have adapted to different environments through habitat selection,leading to genetic variations in metabolic patterns,organ development,and lifespan,resulting in body size divergence between the two locally adapted populations.These findings provide important insights into the genetic mechanisms underlying body size variation in groupers and species differentiation.
文摘This article presents a fuzzy logic-based approach to coordinate the control devices of the power system, such as Power System Stabilizers (PSS) and Static Synchronous Compensators (STATCOM), to damp power oscillations caused by dynamic disturbances. At first, we used the Lyapunov method to study the dynamic stability of the power grid in the Republic of Congo. This method allowed us to analyze the eigenvalues of the state variable matrix and highlight the eigenvalues in the complex plane. Secondly, we proposed a fuzzy logic-based controller to account for uncertainties existing near the thresholds. The inputs to this controller are the generator speed and generator rotor angle. We demonstrated the effectiveness and feasibility of this fuzzy control by applying it to the power grid of the Republic of Congo, with three power stabilizers and two STATCOMs. .
文摘Through its media logic, which is defined by programmability, pervasiveness, connectivity, and datafication, WeChat establishes a non-linear, interactive, and user-dominated media environment. This media logic enhances the influence of each user within WeChat’s narrative landscape and revolutionises traditional media narration methods by enabling them to generate and distribute content. In such an environment, users are able to edit, receive, and send information without constraints of time or distance, which enables delayed interactions that broaden the potential for human communication and dissemination. Additionally, WeChat partially replaces social behaviours and institutions, thereby modifying their original structures and characteristics. As individuals become more accustomed to this media environment, they progressively adjust to the forms that are appropriate for media representation on WeChat, thereby completing the mediatization of culture and society. In this process, individuals are becoming more dependent on media and media logic, with WeChat’s influence permeating social and cultural activities through its media logic. This interaction has a substantial impact on society and culture, thereby aiding in their reconstruction.
文摘Although there are many different types of philosophy, many philosophers agree that the mainstream of Western philosophy (Socrates, Plato, Aristotle, Descartes, Kant, Wittgenstein) developed toward the perfection of Socrates’ absolutism. But can the absolutism maintain its central position after analytic philosophy? There are pessimistic views on this problem, such as that of R. Rorty, the standard-bearer of neo-pragmatism. Recently, I proposed quantum language (which is including quantum mechanics, statistics, fuzzy sets, etc.). I think that that this theory is not only one of the most fundamental scientific theories, but also the scientific final destination of Western philosophy. If so, Socrates’ dream has come true. The purpose of this paper is to discuss the above and to inform readers that quantum language has the power to create a paradigm shift from the classical mechanical world view to the quantum mechanical worldview.
文摘In the context of induction motor control, there are various control strategies used to separately control torque and flux. One common approach is known as Field-Oriented Control (FOC). This technique involves transforming the three-phase currents and voltages into a rotating reference frame, commonly referred to as the “dq” frame. In this frame, the torque/speed and flux components are decoupled, allowing for independent control, by doing so, the motor’s speed can be regulated accurately and maintain a constant flux which is crucial to ensure optimal motor performance and efficiency. The research focused on studying and simulating a field-oriented control system using fuzzy control techniques for an induction motor. The aim was to address the issue of parameter variations, particularly the change in rotor resistance during motor operation, which causes the control system to deviate from the desired direction. This deviation implies to an increase in the magnetic flux value, specifically the flux component on the q-axis. By employing fuzzy logic techniques to regulate flux vector’s components in the dq frame, this problem was successfully resolved, ensuring that the magnetic flux value remains within the nominal limits. To enhance the control system’s performance, response speed, and efficiency of the motor, sliding mode controllers were implemented to regulate the current in the inner loop. The simulation results demonstrated the proficiency of the proposed methodology.
基金supported by North China Electric Power Research Institute’s Self-Funded Science and Technology Project“Research on Distributed Energy Storage Optimal Configuration and Operation Control Technology for Photovoltaic Promotion in the Entire County”(KJZ2022049).
文摘Aiming at the consumption problems caused by the high proportion of renewable energy being connected to the distribution network,it also aims to improve the power supply reliability of the power system and reduce the operating costs of the power system.This paper proposes a two-stage planning method for distributed generation and energy storage systems that considers the hierarchical partitioning of source-storage-load.Firstly,an electrical distance structural index that comprehensively considers active power output and reactive power output is proposed to divide the distributed generation voltage regulation domain and determine the access location and number of distributed power sources.Secondly,a two-stage planning is carried out based on the zoning results.In the phase 1 distribution network-zoning optimization layer,the network loss is minimized so that the node voltage in the area does not exceed the limit,and the distributed generation configuration results are initially determined;in phase 2,the partition-node optimization layer is planned with the goal of economic optimization,and the distance-based improved ant lion algorithm is used to solve the problem to obtain the optimal distributed generation and energy storage systemconfiguration.Finally,the IEEE33 node systemwas used for simulation.The results showed that the voltage quality was significantly improved after optimization,and the overall revenue increased by about 20.6%,verifying the effectiveness of the two-stage planning.
文摘A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequence within the sampling period is calculated. Lagrange interpolation is used to fit the overlapping rate curve of the sequence. An empirical threshold for the overlapping rate is then applied to filter candidate key frames from the sequence. In the second stage, the principle of minimizing remapping spots is used to dynamically adjust and determine the final key frame close to the candidate key frames. Comparative experiments show that the proposed method significantly improves stitching speed and accuracy by more than 40%.
文摘This article conducts an analysis and exploration of the English subtitles translation of the domestic animated film Chang’an from the perspective of eco-translatology.Taking three-dimensional transformation as the entry point,it analyzes the adaptation and selection of subtitle translators in the translation process from the dimensions of language,culture,and communication in Chang’an,aiming to enrich the practical analysis of eco-translatology and provide valuable insights and references for the theoretical construction and practical application of eco-translatology.This article enriches the practical analysis of eco-translatology and also validates to a certain extent the applicability of“three-dimensional”transformation.