A three-dimensional model of the Logone Birni Basin (LBB) is presented by combining gravity and magnetic data and constrained by broad seismic profiles. The 3-D model has revealed the distribution of the stratigraphic...A three-dimensional model of the Logone Birni Basin (LBB) is presented by combining gravity and magnetic data and constrained by broad seismic profiles. The 3-D model has revealed the distribution of the stratigraphic formations as well as the top basement variation. Detailed structure of different stratigraphic sequences is presented for the first time for this basin and some of the sequences correlate with established sequences of the neighboring basins. The sediments pill consists of six sedimentary units dating from the Neocomian to the Quartenary. The Makary subbasin or Northern Logone Birni Basin (NLBB) is the deepest part of the basin and may hold good prospect for hydrocarbon generation and accumulation. However, the limited presence of faults and intrusive bodies decreases the possibility of thermal degeneration, contrary to the Central Logone Birni Basin (CLBB) where conditions seem to be fulfilled for possible hydrocarbon generation and maturity. The complexity of the structural pattern of the model is further enhanced by the presences of volcanic bodies, some of which lay directly on basement or interbedded with the sediments layers mainly in the CLBB.展开更多
Many scientists used the power spectrum of the gravity anomaly to obtain the average depth of the disturbing surface or equivalently the average depth to the top of the disturbing body. The spectrum of gravity anomaly...Many scientists used the power spectrum of the gravity anomaly to obtain the average depth of the disturbing surface or equivalently the average depth to the top of the disturbing body. The spectrum of gravity anomaly due to layered source is separated into multiple segments in frequency domain that can be interpreted in terms of mean depth of the interface. The half of the slope of the segments gives the mean depth of the interfaces. This study aims to estimate the average residual depth anomalies of various regions of the northern Logone Birni sedimentary basin of Cameroon using polynomial separation of gravity anomalies, and spectral analysis along different profiles (segments). The profiles were derived from residual anomaly maps obtained by fitting the Bouguer anomalies, the interpretation used polynomial separation and depth average was done using spectral analysis. Positive and negative residual gravity anomalies were highlighted and their interpretation revealed the structural directions of the sedimentary basin (NW-SE and NE-SW), as well as an intimate relationship between the negative anomalies and the northern Logone Birni sedimentary basin. Three distinct residual anomalies were identified over the Goulfey, Tom Merifine and Tourba basin with an average depth varying between 0.24 km and 4.55 km.展开更多
The pollution of sediments by inorganic pollutants requires particularly important attention because of their toxicity, their persistence in the environment and their bioaccumulation by animal and plant life. The poll...The pollution of sediments by inorganic pollutants requires particularly important attention because of their toxicity, their persistence in the environment and their bioaccumulation by animal and plant life. The pollution of sediments by inorganic pollutants requires particularly important attention because of their toxicity, their persistence in the environment and their bioaccumulation by animal and plant living beings. This study focuses on the pollution of sediments of the Chari and Logon rivers in the city of N’Djamena by heavy metals. The objective of this study is to evaluate the degree of contamination, the geo-accumulation index and the degree of the Pollutant Loading Index of some heavy metals (Pb, Cr, Cu, Mn and Cd) and iron in the sediments of the sampled sites. The average concentrations of heavy metals and iron in the sediments are: Pb (10.00 ± 00 μg/Kg to 126 ± 16.52 μg/Kg);Cr VI (0.13 ± 00 mg/Kg to 0.21 ± 00 mg/Kg);Cd (trace);Cu (0.08 ± 0.02 mg/kg to 3.23 ± 0.64 mg/kg);Fe (0.25 ± 0.00 mg/kg to 5.79 ± 0.00 mg/kg);and Mn (0.2 ± 0.00 mg/Kg to 1.1 ± 0.00 mg/Kg);in order of highest to lowest abundance: Fe > Mn > Cd > Cu > Cr VI > Pb for the Logon;Fe > Cu > Mn > Cd > Cr VI > Pb for the Chari and Fe > Mn > Cu > Cd > Cr VI > Pb for the Confluent. The contamination factors for all heavy metals range from no contamination to low contamination for the sediments analyzed. The geo-accumulation indices indicate that the sampled sites are not polluted. The same is true for Er and RI which confirm an absence of ecological risks in the analyzed sediments.展开更多
文摘A three-dimensional model of the Logone Birni Basin (LBB) is presented by combining gravity and magnetic data and constrained by broad seismic profiles. The 3-D model has revealed the distribution of the stratigraphic formations as well as the top basement variation. Detailed structure of different stratigraphic sequences is presented for the first time for this basin and some of the sequences correlate with established sequences of the neighboring basins. The sediments pill consists of six sedimentary units dating from the Neocomian to the Quartenary. The Makary subbasin or Northern Logone Birni Basin (NLBB) is the deepest part of the basin and may hold good prospect for hydrocarbon generation and accumulation. However, the limited presence of faults and intrusive bodies decreases the possibility of thermal degeneration, contrary to the Central Logone Birni Basin (CLBB) where conditions seem to be fulfilled for possible hydrocarbon generation and maturity. The complexity of the structural pattern of the model is further enhanced by the presences of volcanic bodies, some of which lay directly on basement or interbedded with the sediments layers mainly in the CLBB.
文摘Many scientists used the power spectrum of the gravity anomaly to obtain the average depth of the disturbing surface or equivalently the average depth to the top of the disturbing body. The spectrum of gravity anomaly due to layered source is separated into multiple segments in frequency domain that can be interpreted in terms of mean depth of the interface. The half of the slope of the segments gives the mean depth of the interfaces. This study aims to estimate the average residual depth anomalies of various regions of the northern Logone Birni sedimentary basin of Cameroon using polynomial separation of gravity anomalies, and spectral analysis along different profiles (segments). The profiles were derived from residual anomaly maps obtained by fitting the Bouguer anomalies, the interpretation used polynomial separation and depth average was done using spectral analysis. Positive and negative residual gravity anomalies were highlighted and their interpretation revealed the structural directions of the sedimentary basin (NW-SE and NE-SW), as well as an intimate relationship between the negative anomalies and the northern Logone Birni sedimentary basin. Three distinct residual anomalies were identified over the Goulfey, Tom Merifine and Tourba basin with an average depth varying between 0.24 km and 4.55 km.
文摘The pollution of sediments by inorganic pollutants requires particularly important attention because of their toxicity, their persistence in the environment and their bioaccumulation by animal and plant life. The pollution of sediments by inorganic pollutants requires particularly important attention because of their toxicity, their persistence in the environment and their bioaccumulation by animal and plant living beings. This study focuses on the pollution of sediments of the Chari and Logon rivers in the city of N’Djamena by heavy metals. The objective of this study is to evaluate the degree of contamination, the geo-accumulation index and the degree of the Pollutant Loading Index of some heavy metals (Pb, Cr, Cu, Mn and Cd) and iron in the sediments of the sampled sites. The average concentrations of heavy metals and iron in the sediments are: Pb (10.00 ± 00 μg/Kg to 126 ± 16.52 μg/Kg);Cr VI (0.13 ± 00 mg/Kg to 0.21 ± 00 mg/Kg);Cd (trace);Cu (0.08 ± 0.02 mg/kg to 3.23 ± 0.64 mg/kg);Fe (0.25 ± 0.00 mg/kg to 5.79 ± 0.00 mg/kg);and Mn (0.2 ± 0.00 mg/Kg to 1.1 ± 0.00 mg/Kg);in order of highest to lowest abundance: Fe > Mn > Cd > Cu > Cr VI > Pb for the Logon;Fe > Cu > Mn > Cd > Cr VI > Pb for the Chari and Fe > Mn > Cu > Cd > Cr VI > Pb for the Confluent. The contamination factors for all heavy metals range from no contamination to low contamination for the sediments analyzed. The geo-accumulation indices indicate that the sampled sites are not polluted. The same is true for Er and RI which confirm an absence of ecological risks in the analyzed sediments.
